SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The orbiter/payload interface area was examined with respect to integrating the payload to the shuttle/tug. Shuttle payload guidelines were developed from NASA study efforts in aerospace design, cost, and operation analyses. Solar observation in a shuttle sortie mode was also studied.
The LRC MASS was modified and updated to include logic for efficient analysis of space shuttle payload operations. All MASS computer models were reviewed for compatibility with, and applicability to, the shuttle sortie mission. The MASS modification efforts were concentrated on two computer programs, the general scheduling model (GSM) and one day model (ODM). A new computer program, the DAYLIB Tape Processor, was developed to update the link between the GSM and ODM. The resulting MASS is an operationally efficient analytical tool that will allow a rapid assessment of shuttle and shuttle payload operations.
The findings of a study to define the required payloads for conducting life science experiments in space are presented. The primary objectives of the study are: (1) identify research functions to be performed aboard life sciences spacecraft laboratories and necessary equipment, (2) develop conceptual designs of potential payloads, (3) integrate selected laboratory designs with space shuttle configurations, and (4) establish cost analysis of preliminary program planning.
Payload benefits to be derived from refurbishment can be related to individual spacecraft programs directly and for planning purposes to the entire shuttle mission model. In the case of the large space telescope program, cost savings obtained through the use of the shuttle for maintenance operations have been estimated to be in the range from 30 to 40%. This saving is realized over an operational lifetime of 15 years by reducing, through refurbishment on orbit, the number of flight units along with 'optimized' reliability goals commensurate with periodic maintenance revisits at one-year intervals. Shuttle-era payload implications are discussed together with a pressurized on-orbit maintenance configuration, an earth observation satellite, and some typical teleoperator-serviced spacecraft.
Energy spectra and pitch angle distributions of auroral electrons have been measured in a premidnight multiple arc auroral display by a Javelin rocket containing two identical payloads that separated in flight. The rocket was launched from Fort Churchill, Canada, at 0459 UT on March 2, 1968, and covered an altitude range up to 800 km. The electron energy spectra between 40 eV and 20 keV show a 'continuum' spectrum with a superimposed energetic peak. The center energy of the peak was observed to shift from 10-12 keV over the arcs to 2-3 keV between the arcs. This spectral structure is shown to be similar to the inverted 'V' structure reported by other investigators. The in flight separation of the two payloads allowed investigation of spatial versus temporal effects in the auroral precipitation.
The findings and recommendations of the Materials Processing and Space Manufacturing group of the space shuttle payload planning activity are presented. The effects of weightlessness on the levitation processes, mixture stability, and control over heat and mass transport in fluids are considered for investigation. The research and development projects include: (1) metallurgical processes, (2) electronic materials, (3) biological applications, and (4)nonmetallic materials and processes. Additional recommendations are provided concerning the allocation of payload space, acceptance of experiments for flight, flight qualification, and private use of the space shuttle.
Examination of commercial equipment technologies revealed that the functional performance requirements of space processing equipment could generally be met by state-of-the-art design practices. Thus, an apparatus could be evolved from a standard item or derived by custom design using present technologies. About 15 percent of the equipment needed has no analogous commercial base of derivation and requires special development. This equipment is involved primarily with contactless heating and position control. The derivation of payloads using commercial equipment sources provides a broad and potentially cost-effective base upon which to draw. The derivation of payload equipment from commercial technologies poses other issues beyond that of the identifiable functional performance, but preliminary results on testing of selected equipment testing appear quite favorable. During this phase of the SPA study, several aspects of commercial equipment utility were assessed and considered. These included safety, packaging and structural, power conditioning (electrical/electronic), thermal and materials of construction.
It is argued that the numerous factors governing the development and use of low-cost payload systems must be analyzed from a total systems viewpoint covering design, standardization, reuse, and refurbishment operations both in orbit and on the ground. Standardization of payloads for use with different transportation systems is shown to require extensive management studies involving cooperation between users and the technical community. Problems and potential solutions are identified in areas of orbital and ground-based refurbishment, and candidate vehicle systems are discussed for delivery, repair, replacement, and resupply of systems in orbit.
The accommodation requirements for a representative spectrum of automated spacecraft are analyzed and compared to the services provided by the Space Shuttle and Space Tug. The purpose and engineering characteristics of a number of possible items of general purpose Shuttle-payload interface equipment are discussed. The benefits provided to automated payloads by the Space Transportation System are summarized.
Several proposed Shuttle payloads for studying atmospheric phenomena and structure are discussed, with particular reference to a concept being developed for an optical facility. The payloads are put together of instruments both for in-situ measurements and for remote sensing of atmospheric emission, scattering, and absorption, using active and passive optical elements. Studies may include the artificial perturbation of the upper atmosphere with vapor releases or high powered UV lasers. The major areas of research in atmospheric physics are outlined, along with the parameters and phenomena of interest and the measurement techniques most frequently employed.
Description of the ESRO organization for Space Shuttle payload planning, and evaluation of the European Sortie Lab design activity. The NASA and ESRO organizations for Shuttle payload planning are described and contrasted. The role of European cooperative activities in the development of three different Sortie Lab design concepts is discussed.
The 12 month Phase A Conceptual Design Study of the Atmospheric, Magnetospheric and Plasmas in Space (AMPS) payload performed within the Program Development Directorate of the Marshall Space Flight Center is presented. The AMPS payload makes use of the Spacelab pressurized module and pallet, is launched by the space shuttle, and will have initial flight durations of 7 days. Scientific instruments including particle accelerators, high power transmitters, optical instruments, and chemical release devices are mounted externally on the Spacelab pallet and are controlled by the experimenters from within the pressurized module. The capability of real-time scientist interaction on-orbit with the experiment is a major characteristic of AMPS.
The scientific instrumentation and other payload systems of a solar rocket experiment are described in detail. The objectives of the rocket payload were: (1) to carry out high-spectral-resolution measurements of a coronal active region in the X-ray and extreme ultraviolet regions at the same time as high-spatial-resolution measurements were being made of the same active region by the Apollo Telescope Mount experiments flown on Skylab; and (2) to derive a physical model of the conditions in the coronal active regions, which dominate the X-ray spectrum of the nonflaring active sun, on the basis of data obtained from both the rocket instrumentation and several of the Apollo Telescope Mount experiments.
Space replaceable units and payload configurations are revised to reflect increased levels of redundancy to be more consistent with current design practices. A reassessment of expendable payload design reliabilities was performed to provide a common basis for comparison with space serviceable configurations.
Constraints on the CRT display size for the shuttle orbiter cabin are studied. The viewing requirements placed on these monitors were assumed to involve display of imaged scenes providing visual feedback during payload operations and display of alphanumeric characters. Data on target recognition/resolution, target recognition, and range rate detection by human observers were utilized to determine viewing requirements for imaged scenes. Field-of-view and acuity requirements for a variety of payload operations were obtained along with the necessary detection capability in terms of range-to-target size ratios. The monitor size necessary to meet the acuity requirements was established. An empirical test was conducted to determine required recognition sizes for displayed alphanumeric characters. The results of the test were used to determine the number of characters which could be simultaneously displayed based on the recognition size requirements using the proposed monitor size. A CRT display of 20 x 20 cm is recommended. A portion of the display area is used for displaying imaged scenes and the remaining display area is used for alphanumeric characters pertaining to the displayed scene. The entire display is used for the character alone mode.
The workshop to define feasible concepts in the UV-optical 1R area for Astronomy Spacelab Payloads is reported. Payloads proposed include: high resolution spectrograph, Schmidt camera spectrograph, UV telescope, and small infrared cryogenic telescope.
The extent was investigated to which experiment hardware and operational requirements can be met by automatic control and material handling devices; payload and system concepts that make extensive use of automation technology are defined. Hardware requirements for each experiment were established and tabulated, and investigations of applicable existing hardware were documented. The capabilities and characteristics of industrial automation equipment, controls, and techniques are presented in the form of a summary of applicable equipment characteristics in three basic mutually-supporting formats. Facilities for performing groups of experiments are defined along with four levitation groups and three furnace groups; major hardware elements required to implement them were identified. A conceptual design definition of ten different automated processing facilities is presented along with the specific equipment to implement each facility and the design layouts of the different units. Constraints and packaging, weight, and power requirements for six payloads postulated for shuttle missions in the 1979 to 1982 time period were examined.
Substantial cost savings and performance improvement will result by the use of Extravehicular Activity (EVA) to supplement or replace automation. Taking an all-pallet version of Langley Research Center's Advanced Technology Laboratory payload as an example, $54.5 million should be saved by EVA over automation, considering deployment and stowing only. Additional savings should accrue when reduced-reliability equipment (where permitted) is substituted for high reliability equipment and EVA is used for repairs. More comprehensively, launch and operation costs could also be reduced by elimination of the need to return to the ground for repairs; and production spending might be reduced when an entire vehicle was saved by manned EVA repair not feasible via automation. Potential disadvantages include increased cost due to development and manufacture of EVA equipment, payload provisions to enable EVA interfaces, training, orbiter modification, and prevention of EVA-caused contamination. Possible applications to the Space Shuttle missions are discussed.