Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRESSURE DEPENDENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Access and Capture of Layered Double Perovskite Polytypic Phase through High-Pressure Engineering

Engineering halide perovskites through external pressure is as an effective means to tune the crystal structure, thus optoelectronic properties of the material. In this work, we studied the structural and optical property evolutions of Cs 4 M II Bi 2 Cl 12 (M II : Cd, Cd 0.8 Mn 0.2 , Mn) layered double perovskite (LDP) crystalline powders under high pressure. A novel polytypic phase transition was observed featuring lateral interlayer sliding of the Bi–M II –Bi trilayer units, resulting in a new LDP-12R phase. Importantly, this high-pressure induced LDP-12R crystal phase can be preserved after complete decompression and captured at ambient conditions. Moreover, the LDP samples showed a pressure-dependent photoluminescence property. Finally, our findings exemplified a new perovskite polytype that can be accessed and captured through high-pressure processing, advocating the uniqueness of LDP materials with soft and transformable crystal lattices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Wisconsin In Situ Penning (WISP) gauge: A versatile neutral pressure gauge to measure partial pressures in strong magnetic fields

A new type of in-vessel Penning gauge, the Wisconsin In Situ Penning (WISP) gauge, has been developed and successfully operated in the Wendelstein 7-X (W7-X) island divertor baffle and vacuum vessel. The capacity of the quantitative measurements of the neutral reservoir for light impurities, in particular, helium, is important for tokamaks as well as stellarator divertors in order to avoid fuel dilution and radiative energy loss. Penning gauges assisted by spectroscopy are a powerful tool to obtain the total neutral pressure as well as fractional neutral pressures of specific impurities. The WISP gauge is a miniaturized Penning gauge arrangement, which exploits the ambient magnetic field of magnetic confinement fusion experiments to establish the Penning discharge. Then, in situ spectroscopy is conducted to separate the fractional neutral pressures of hydrogen, helium, and possibly also other impurities. The WISP probe head was qualified using the magnetic field of the Magnetized Dusty Plasma Experiment at Auburn University between 0.25 T and 3.5 T [E. Thomas et al ., J. Plasma Phys. 81, 345810206 (2015)]. The in-depth quantitative evaluation for hydrogen and helium will be shown as well as an exploration of nitrogen, argon, and neon. A power law scaling between current I and pressure p, I = f (Gas,V) p n⁽Gas, B⁾ , was shown. The factor f is gas and anode potential dependent, while n is gas and magnetic field strength dependent. Pressure measurements from 0.1 mbar and down to 1 × 10 -5 mbar were achieved, demonstrating a reliable operating range for relevant pressure levels in the divertor and main vessel regions in current and future fusion devices, with a time resolution of up to 1 kHz. The lowest achievable pressure measurement increases with an increase in B and can be shifted with the anode potential V . At W7-X, the WISP probe head was mounted on an immersion tube setup that passes through the cryostat and places the probe head close to the plasma. Two probe heads were positioned in different divertor pump gaps, top and bottom, and one close to the plasma on the midplane in one module. The gauges were in situ calibrated together with the ASDEX pressure gauges [G. Haas and H.-S. Bosch, Vacuum 51, 39 (1998)]. Data were taken during the entire operation phase 1.2b, and measurements were coherent with other neutral gas pressure gauges. For the spectroscopic partial pressure measurements, channels of a spectroscopic detection system based on photo-multipliers, a so-called filterscope [R. J. Colchin et al ., Rev. Sci. Instrum. 74, 2068 (2003)], provided by the Oak Ridge National Lab were used.

47 OTHER INSTRUMENTATION↗

Evolution of the Ureilite Parent Body

Ureilites are ultramafic achondrites composed primarily of olivine and pyroxene with intergranular fine-grained metal, sulfides, and silicates. Ureilites contain significant amounts of carbon (up to about 6.5 wt%) as graphite, lonsdaleite, and/or diamond. It has been shown that carbon-silicate redox (i.e. "smelting") reactions are responsible for the negative FeO-MnO (or positive Fe/Mn-Fe/Mg with constant Mn/Mg) trend seen in the mineral and bulk compositions of ureilites and for the positive correlation between modal percent pigeonite and mg#. Carbon redox reactions are strongly exothermic and pressure dependent; so ureilites with the largest mg# are the most reduced, experienced the highest temperatures, and formed at the lowest pressures, i.e. near the surface of the ureilite parent body. Ureilites with the largest mg# have the smallest the delta(sup 18)O and the largest Delta(sup 17)O. To explain this, Singletary and Grove proposed that heterogeneous accretion took place on the ureilite parent body, which lead to a radial distribution of the oxygen isotopes. To further investigate possible relationships, we performed carbon isotope and electron probe measurements on a suite of 27 ureilites in order to see the type of correlation that exists between mg#, oxygen isotopes, and carbon.

Hudson, P.↗

Indications for Lifshitz transitions in the nodal-line semimetal ZrSiTe induced by interlayer interaction

The layered material ZrSiTe is currently extensively investigated as a nodal-line semimetal with Dirac-like band crossings protected by nonsymmorphic symmetry close to the Fermi energy. A recent infrared spectroscopy study on ZrSiTe under external pressure found anomalies in the optical response, providing hints for pressure-induced phase transitions at ≈4.1 and ≈ 6.5GPa. By pressure-dependent Raman spectroscopy and x-ray diffraction measurements combined with electronic band structure calculations we find indications for two pressure-induced Lifshitz transitions with major changes in the Fermi surface topology in the absence of lattice symmetry changes. These electronic phase transitions can be attributed to the enhanced interlayer interaction induced by external pressure. Overall, our findings demonstrate the crucial role of the interlayer distance for the electronic properties of layered van der Waals topological materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anomalous temperature-dependent magnetization in the nearly collinear antiferromagnet Y 2 Co 3

Y 2 Co 3 is a newly discovered antiferromagnetic (AFM) compound with distorted kagome layers. Here, previous investigations via bulk magnetization measurements suggested a complex non-collinear magnetic behavior, with magnetic moments primarily anti-aligned along the b axis and some canting towards the ac plane. In this study, we report the magnetic structure of Y 2 Co 3 to be an A-type AFM structure with ferromagnetic (FM) interactions within the distorted kagome plane and an inter-plane antiferromagnetic interaction, as determined by single crystal neutron diffraction. The magnetic moments align along the b axis, with minimal canting towards the c axis, at odds with the previous interpretation of bulk magnetization measurements. The magnetic moments on the two distinct Co sites are (0, -0.68, 0) μB and (0, 1.25, 0.07) μ B . We attribute the previously reported ”non-collinear” behavior to the considerable temperature dependence of itinerant AFM exchange interactions, induced by thermal contraction along the b axis. Additionally, our examination of lattice constants through pressure studies reveals compensating effects on FM and AFM interactions, resulting in negligible pressure dependence of T N .

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetic and Superconducting Materials at High Pressures

The work concentrates on few important tasks in enabling techniques for search of superconducting compressed hydrogen compounds and pure hydrogen, investigation of mechanisms of high-Tc superconductivity, and exploring new superconducting materials. Along that route we performed several challenging tasks, including discovery of new forms of polyhydrides of alkali metal Na at very high pressures. These experiments help us to establish the experimental environment that will provide important information on the high-pressure properties of hydrogen-rich compounds. Our recent progress in RIXS measurements opens a whole field of strongly correlated 3d materials. We have developed a systematic approach to measure major electronic parameters, like Hubbard energy U, and charge transfer energy Δ, as function of pressure. This technique will enable also RIXS studies of magnetic excitations in iridates and other 5d materials at the L edge, which attract a lot of interest recently. We have developed new magnetic sensing technique based on optically detected magnetic resonance from NV centers in diamond. The technique can be applied to study superconductivity in high-TC materials, to search for magnetic transitions in strongly correlated and itinerant magnetic materials under pressure. Summary of Project Activities; development of high-pressure experimentation platform for exploration of new potential superconductors, metal polyhydrides (including newly discovered alkali metal polyhydrides), and already known superconductors at the limit of static high-pressure techniques; investigation of special classes of superconducting compounds (high-Tc superconductors, new superconducting materials), that may provide new fundamental knowledge and may prove important for application as high-temperature/high-critical parameter superconductors; investigation of the pressure dependence of superconductivity and magnetic/phase transformations in 3d transition metal compounds, including transitions from magnetic to nonmagnetic phases in a broad pressure-temperature range; using X-ray methods including the newly developed RIXS high-pressure technique to explore pressure-tuned electronic excitations in strongly correlated 3d-materials; and advancing transport and magnetic techniques for measurements on small samples at very high pressures in a wide temperature range, with the application of focused ion beam technology and photolithography tailored to the design of microcircuits down to a nanoscale size, thus expanding the horizon in the search for novel physical phenomena at ultrahigh pressures. Apply new optical magnetic sensing techniques with NV- centers in diamond to detect superconductivity and magnetic transitions with unprecedented spatial resolution.

36 MATERIALS SCIENCE↗

Pyroxene thermobarometry in LL-group chondrites and implications for parent body metamorphism

Geothermometry based on the compositions of clinopyroxenes in type 6 and 7 LL chondrites gives coherent results, but the estimated temperatures from coexisting orthopyroxenes are consistently lower than for clinopyroxenes. Orthopyroxene thermometry is suspect because of compositional effects of polymorphic inversions and/or unknown kinetic factors. Lack of clinopyroxene equilibration precludes accurate estimation of peak metamorphic temperatures for type 4 and 5 chondrites. There is no apparent correlation between Al content (a pressure-dependent variable) and equilibration temperature in chondritic pyroxenes. This finding, which is at variance with a previously published conclusion that temperature and pressure are correlated in metamorphosed chondrites, may have important implications for asteroid thermal models.

Mcsween, Harry Y., Jr.↗

Plastic flow modeling in glassy polymers

Glassy amorphous and semi-crystalline polymers exhibit strong rate, temperature, and pressure dependent polymeric yield. As a rule of thumb, in uniaxial compression experiments the yield stress increases with the loading rate and applied pressure, and decreases as the temperature increases. Moreover, by varying the loading state itself complex yield behavior can be observed. One example that illustrates this complexity is that most polymers in their glassy regimes (i.e., when the temperature is below their characteristic glass transition temperature) exhibit very pronounced yield in their uniaxial stress stress-strain response but very nebulous yield in their uniaxial strain response. In uniaxial compression, a prototypical glassy-polymer stress-strain curve has a stress plateau, often followed by softening, and upon further straining, a hardening response. Uniaxial compression experiments of this type are typically done from rates of 10{sup -5} s{sup -1} up to about 1 s{sup -1}. At still higher rates, say at several thousands per second as determined from Split Hopkinson Pressure Bar experiments, the yield can again be measured and is consistent with the above rule of thumb. One might expect that that these two sets of experiments should allow for a successful extrapolation to yet higher rates. A standard means to probe high rates (on the order of 105-107 S-I) is to use a uniaxial strain plate impact experiment. It is well known that in plate impact experiments on metals that the yield stress is manifested in a well-defined Hugoniot Elastic Limit (HEL). In contrast however, when plate impact experiments are done on glassy polymers, the HEL is arguably not observed, let alone observed at the stress estimated by extrapolating from the lower strain rate experiments. One might argue that polymer yield is still active but somehow masked by the experiment. After reviewing relevant experiments, we attempt to address this issue. We begin by first presenting our recently developed glassy polymer model. While polymers are well known for their non-equilibrium deviatoric behavior we have found the need for incorporating both equilibrium and non-equilibrium volumetric behavior into our theory. Experimental evidence supporting the notion of non-equilibrium volumetric behavior will be summarized. Our polymer yield model accurately captures the stress plateau, softening and hardening and its yield stress predictions agree well with measured values for several glassy polymers including PMMA, PC, and an epoxy resin. We then apply our theory to plate impact experiments in an attempt to address the questions associated with high rate polymer yield in uniaxial strain configurations.

36 MATERIALS SCIENCE↗

Steady detonation propagation in thin channels with strong confinement

We examine asymptotically the dynamics of two-dimensional, steady detonation wave propagation and failure for a strongly confined high explosive (HE), in which the width of the explosive is small relative to the reaction zone length. An energy balance equation is derived, which shows how the longitudinal acceleration of subsonic flow behind the detonation shock is influenced both by chemical reaction and by the effects of HE boundary streamline deflection, specifically via the induced rate of change of mass flux through the detonation wave. The latter serves to either counteract or reinforce the acceleration of longitudinal flow, depending on the sign of the gradient of the boundary streamline deflection at the detonation shock. The analysis is valid for general equations of state and chemical reaction rates in the HE. The asymptotically derived form of the energy equation represents an eigenvalue problem for the determination of the steady detonation propagation speed, solved via a shooting method. We explore specific results for ideal and stiffened equations of state, along with a pressure-dependent reaction rate for which changes in the pressure exponent and reaction order are also studied. We consider the influences of both straight and curved HE boundary streamline shapes. The asymptotic analysis reveals significant physical insights into how detonation propagation and failure are affected by strong confinement.

42 ENGINEERING↗

Distinct superconducting states in the pressure-induced metallic structures of the nominal semimetal Bi[subscript 4]Te[subscript 3]

The end members, Bi and Bi{sub 2}Te{sub 3}, of the infinitely adaptive (Bi{sub 2})m(Bi{sub 2}Te{sub 3}){sub n} series of compounds have not only been revealed to be topological insulators under the appropriate conditions, but have also been shown to be superconductors under pressure, suggesting the potential for bulk superconductor-topological-insulator interfaces and associated quantum computing applications. Herein, we report the pressure-dependent evolution of the structure and electrical transport of the nominal semimetal Bi4Te{sub 3}, a member of the (Bi{sub 2})m(Bi{sub 2}Te{sub 3}){sub n} series. Under pressure, Bi4Te{sub 3} undergoes several structural phase transformations, ultimately yielding a metallic body-centered-cubic structure exhibiting superconductivity with a maximum T{sub c} = 8.4 K at 16.2 GPa. The occurrence of structure-dependent superconductivity in Bi{sub 4}Te{sub 3} is remarkably similar to the end members of the (Bi{sub 2})m(Bi{sub 2}Te{sub 3}){sub n} series, intimating a convergence to high-pressure universal behavior that may expose the subtle variations that lead to the topological insulating and superconducting states in these systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pressure-Induced Polymorphic, Optical, and Electronic Transitions of Formamidinium Lead Iodide Perovskite

Formamidinium lead iodide (FAPbI 3 ) perovskite as a superior solar cell material was investigated in two polymorphs at high pressures using in situ synchrotron X-ray diffraction, FTIR spectroscopy, photoluminescence (PL) spectroscopy, electrical conductivity (EC) measurements, and ab initio calculations. We identified two new structures (i.e., Imm2 and Immm) for α-FAPbI 3 but only a structural distortion (in C2/c) for δ-FAPbI 3 upon compression. A pressure-enhanced hydrogen bond plays a prominent role in structural modifications, as corroborated by FTIR spectroscopy. PL measurements and calculations consistently show the structure and pressure dependences of the band gap energies. Lastly, EC measurements reveal drastically different transport properties of α- and δ-FAPbI 3 at low pressures but a common trend to metallic states at high pressures. All of these observations suggest strongly contrasting structural stabilities and pressure-tuned optoelectric properties of the two FAPbI 3 polymorphs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Oceanic lithosphere and asthenosphere: The thermal and mechanical structure

A coupled thermal and mechanical solid state model of the oceanic lithosphere and asthenosphere is presented. The model includes vertical conduction of heat with a temperature dependent thermal conductivity, horizontal and vertical advection of heat, viscous dissipation or shear heating, and linear or nonlinear deformation mechanisms with temperature and pressure dependent constitutive relations between shear stress and strain rate. A constant horizontal velocity u sub 0 and temperature t sub 0 at the surface and zero horizontal velocity and constant temperature t sub infinity at great depth are required. In addition to numerical values of the thermal and mechanical properties of the medium, only the values of u sub 0, t sub 0 and t sub infinity are specified. The model determines the depth and age dependent temperature horizontal and vertical velocity, and viscosity structures of the lithosphere and asthenosphere. In particular, ocean floor topography, oceanic heat flow, and lithosphere thickness are deduced as functions of the age of the ocean floor.

Schubert, G.↗

Influence of autoignition delay time characteristics of different fuels on pressure waves and knock in reciprocating engines

The functional relationship of autoignition delay time with temperature and pressure is employed to derive the propagation velocities of autoignitive reaction fronts for particular reactivity gradients, once autoignition has been initiated. In the present study of a variety of premixtures, with different functional relationships, such gradients comprise fixed initial temperature gradients. The smaller is the ratio of the acoustic speed through the mixture to the localised velocity of the autoignitive front, the greater are the amplitude and frequency of the induced pressure wave. This might lead to damaging engine knock. At higher values of the ratio, the autoignition can be benign with only small over-pressures. This approach to the effects of autoignition is confirmed by its application to a variety of experimental studies involving: (i)Imposed temperature gradients in a rapid compression and expansion machine. (ii)Onset of knock in an engine with advancing spark timing. (iii)Development of autoignition at a single hot spot in an engine. (iv)Autoignition fronts initiated by several hot spots. There is much diversity in the effects that can be produced by different fuels in different ranges of temperature and pressure. Higher values of autoignitive propagation speeds lead to increasingly severe engine knock. Such effects cannot always be predicted from the Research and Motor octane numbers. (author)

33 ADVANCED PROPULSION SYSTEMS↗

Bulk moduli and high pressure crystal structure of U 3 Si 2

Bulk moduli are vital parameters to assess the mechanical performance of materials including nuclear fuels. Yet, little experimental data exist for U 3 S i2 , a potential accident-tolerant nuclear fuel, whose bulk modulus has only been measured by resonant ultrasonic spectroscopy (RUS). In addition, the knowledge for high-pressure structural behavior and phase equilibrium of U 3 Si 2 is largely lacking. Here we reviewed pressure dependence of the crystal structure of U 3 Si 2 using high-energy synchrotron X-ray diffraction coupled with Rietveld analysis. The pressurization was achieved using a diamond anvil cell (DAC) which provides quasi-hydrostatic pressures up to 37.6 GPa. Crystal structural variation and equations of state of U 3 Si 2 were obtained, and its bulk modulus, a- and c-axial moduli were derived to be 107.11 +/- 5.65 GPa, 82.87 +/- 4.78 GPa and 194.52 +/- 12.03 GPa, respectively. The determined elastic parameters are compared with those obtained by RUS and nanoindentation. (C) 2019 Elsevier B.V. All rights reserved.

36 MATERIALS SCIENCE↗

Pressure effects in the itinerant antiferromagnetic metal TiAu

Here, we report the pressure dependence of the Néel temperature T N up to P ≈ 27 GPa for the recently discovered itinerant antiferromagnet (IAFM) TiAu. The T N (P) phase boundary exhibits unconventional behavior in which the Néel temperature is enhanced from T N ≈ 33 K at ambient pressure to a maximum of T N ≈ 35 K occurring at P ≈ 5.5 GPa. Upon a further increase in pressure, T N is monotonically suppressed to ~22 K at P ≈ 27 GPa. We also find a crossover in the temperature dependence of the electrical resistivity ρ in the antiferromagnetic (AFM) phase that is coincident with the peak in T N (P), such that the temperature dependence of ρ = ρ 0 + A n T n changes from n≈3 during the enhancement of T N to n ≈ 2 during the suppression of T N . Based on an extrapolation of the T N (P) data to a possible pressure-induced quantum critical point, we estimate the critical pressure to be P c ≈ 45 GPa.

36 MATERIALS SCIENCE↗