Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLUTONIUM OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Pressurizing Hagan and SAVY containers to 30-psig (air) to measure the release of analytical cerium oxide test powder

In response to an ESS surrounding the storage of sealed sources at TA-55, personnel from RP-SVS (Radiation Protection Services) and ORI-2 (Operational Readiness & Execution) were approached by ES-55 (Facility System Engineering) to provide technical testing of known nuclear material storage containers. Testing criteria were determined by SB-PF (Safety Basis for Plutonium Facilities). Tests were conducted in conjunction with multiple related projects at the Aerosol Sciences Laboratory (TA-03-0130-0103). An experimental system was quickly developed to deliver a pressure pulse (30-psig) that mimics a sealed source burst scenario. A series of twelve tests was conducted. Six tests were done with two different 5QT SAVY-4000 containers, where each SAVY filter-lid combination was subjected to three successive test insults. Three tests were done with a (0.375" diameter filter) 8Q.T Hagan container, and three tests with a (0.625" diameter filter) 8QT Hagan container. An unused, fresh container filter was used for each tested Hagan container, each receiving only one test insult per filter. Cerium oxide (CeO 2 ) powder was loaded (100 grams per test) into a nozzle in the tested Hagan and SAVY containers, and the nozzle was hard-plumbed to a ball valve and a pressure source. This system was installed into the Los Alamos RRFMC (Respirable Release Measurement Chamber), which is an integrated multipurpose aerosol wind tunnel that satisfies NQA-1 subpart 2.4 for R&D work. The ball valve was fitted with a mechanical linkage for operation from outside the wind tunnel. An aerodynamic particle sizer counted the particle concentrations and size distributions of released aerosol. Respirable aerosol released during the tests was measured and a correction factor for wind tunnel flowrate and internal duct deposition was applied.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Designing Flexibility into the Authorized Radioactive Contents of the 9982 Shipping Package

The 9982 radioactive material package is being designed to safely transport small gram quantities of radioactive material within the United States. Typically, such shipping packages are designed to ship only a single radioactive material content within the U.S., which greatly limits the type of radioactive material allowed for shipment. The 9982’s content, however, is designed around bounding limits for numerous radionuclides, which will allow many more content variations to be shipped in a single package compared to other package designs. Here, contents from 3013, 9977, and 9978 packages are analyzed to determine if they are qualified for shipment in the 9982 using a sum-of-the-fractions methodology to see if the sum of the ratios of the masses of the radionuclides over the mass limits exceeds a value of one (1). Since all three of the example contents meet satisfy this method, the maximum content that could be shipped in a 9982 was determined. For the 3013 package, up to between 199.96 grams and 200 grams of a plutonium mixture could be shipped depending on the weight percentages of the isotopes. The 9977 material resulted in a 174-gram content that satisfies the summations for either metal or oxide form and regardless of whether a shielding pig is present or not. Lastly, the 9978 materials, two different americium standards, have a maximum content mass of 200 grams regardless of whether the americium-241 and americium-243 are shipped together or separately. These three applications of the 9982 exemplify the use for a package with multiple approved contents since the functions of three separate packages are fulfilled by one new package, reducing the need for separate operational procedures.

36 MATERIALS SCIENCE↗

Water Ingress Testing of the Turbula Jar and U-233 Lead Pig Containers

Understanding the water ingress behavior of containers used at the TA-55 Plutonium Facility has significant implications for criticality safety. The purpose of this report is to document the water ingress behavior of the Turbula Jar with Bakelite lid and Viton gaskets (Turbula Jar) used in oxide blending operations and the U-233 lead pig container used to store and transport U-233 material. The technical basis for water resistant containers at TA-55 is described in LA-UR-15-22781, “Water Resistant Container Technical Basis Document for the TA-55 Criticality Safety Program.” Testing of the water ingress behavior of various containers is described in LA-CP-13-00695, “Water Penetration Tests on the Filters of Hagan and SAVY Containers,” LA-UR-15-23121, “Water Ingress into Crimped Convenience Containers under Flooding Conditions,” and in LA-UR- 16-2411, “Water Ingress Testing for TA-55 Containers.” Water ingress criteria are defined in TA55-AP-522 “TA-55 Criticality Safety Program”, and in PA-RD-01009 “TA55 Criticality Safety Requirements.” The water ingress criteria for submersion is no more than 50 ml of water ingress at a 6” water column height for a period of 2 hours.

42 ENGINEERING↗

A Piecewise Local Partial Least Squares (PLS) Method for the Quantitative Analysis of Plutonium Nitrate Solutions

We have developed a piecewise local (PL) partial least squares (PLS) analysis method for total plutonium measurements by absorption spectroscopy in nitric acid-based nuclear material processing streams. Instead of using a single PLS model that covers all expected solution conditions, the method selects one of several local models based on an assessment of solution absorbance, acidity, and Pu oxidation state distribution. The local models match the global model for accuracy against the calibration set, but were observed in several instances to be more robust to variations associated with measurements in the process. The improvements are attributed to the relative parsimony of the local models. Not all of the sources of spectral variation are uniformly present at each part of the calibration range. Thus, the global model is locally overfitting and susceptible to increased variance when presented with new samples. A second set of models quantifies the relative concentrations of Pu(III), (IV), and (VI). Standards containing a mixture of these species were not at equilibrium due to a disproportionation reaction. Therefore, a separate principal component analysis is used to estimate of the concentrations of the individual oxidation states in these standards in the absence of independent confirmatory analysis. The PL analysis approach is generalizable to other systems where the analysis of chemically complicated systems can be aided by rational division of the overall range of solution conditions into simpler sub-regions.

47 OTHER INSTRUMENTATION↗

Synthesis of ThN using a Carbothermic Reduction to Nitridation Process

The thorium fuel cycle has several advantages when compared to the uranium fuel cycle. Not only is thorium more abundant than uranium, it also avoids many of the disadvantages which are inherent to the uranium fuel cycle. For example, the thorium fuel cycle does not result in significant formation of long lived, highly toxic transuranics that are inevitably formed in the uranium fuel cycle. The fissile U-233 that is created through neutron capture of Th-232 is also more proliferation resistant than the Pu-239 created from the uranium fuel cycle, because of the buildup of U-232, a source of extremely hazardous gamma emitters. Additionally, thermal reactors which utilize the thorium fuel cycle may be used to destroy transuranics through transmutation as opposed to the fast reactors that are typically required for the uranium fuel cycle. The result is that not only does the thorium fuel cycle avoid the production of transuranic actinides, it may also be used to destroy the inventory of these isotopes within existing reactors. The work presented here investigates the fabrication of ThN so that its properties may be studied to determine its feasibility as a nuclear fuel within a thorium fuel cycle. While both ThO{sub 2} and ThN have melt points higher than the metal, one of the potential advantages of using ThN instead of ThO{sub 2} is that it has a 28% higher fertile density. Additionally, previous investigations have suggested that ThN has substantially higher thermal conductivity when compared to ThO{sub 2} fuel. This suggests that if a (Th,U)N solid solution can be shown to behave similarly to (U,Pu)N, the nitride fuel form would possess a significant advantage over (Th,U)O{sub 2} which has poor thermal conductivity. A carbothermic reduction to nitridation (CTR-N) process has been utilized extensively at LANL for the production and study of UN, but this type of process has not been used for the fabrication of high purity ThN. The work presented here describes the development of a similar process which will be used to fabricate bulk ThN for subsequent experimental study. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Why is weapons grade plutonium more hazardous to work with than highly enriched uranium?

Highly Enriched Uranium and Weapons grade plutonium have assumed positions of dominant importance among the actinide elements because of their successful uses as explosive ingredients in nuclear weapons and the place they hold as key materials in the development of industrial use of nuclear power. While most chemists are familiar with the practical interest concerning HEU and WG Pu, fewer know the subtleties among their hazards. In this study, a primer is provided regarding the hazards associated with working with HEU and WG Pu metals and oxides. The care that must be taken to safely handle these materials is emphasized and the extent of the hazards is described. The controls needed to work with HEU and WG Pu metals and oxides are differentiated. Given the choice, one would rather work with HEU metal and oxides than WG Pu metal and oxides.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Plutonium Purification by Anion Exchange for Mark-18A Target Processing

The Mark-18A (Mk-18A) program was established to preserve the unique materials found in Mk-18A targets for future research and development activity within the Department of Energy or other U.S. government agencies. Some of the unique, high-valued materials include but are not limited to plutonium-244, heavy curium, americium-241, and californium. The Savannah River Site has sixty-five (65) Mk-18A targets available for recovery. Mk-18A targets will be removed from confinement, dissolved, chemically separated, and calcined to a stable oxide for transport to Oak Ridge National Laboratory (ORNL). The baseline flowsheet is patterned after the ORNL flowsheet, but adapted to the needs and capabilities of facilities at the Savannah River National Laboratory. The primary method for chemical separation of Pu from the other components of the targets is anion exchange using the Reillex™ HPQ resin. Although data exist in the literature for predicting the behavior of Mk-18A dissolver solutions on the Reillex™ resin, it was determined that the presence of a range of dissolved metals might negatively affect the resin performance, resulting in increased 244 Pu losses or poorer product quality.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Combustion Synthesis of Transuranic-doped Ceramics for Nuclear Waste Immobilization

Utilizing the devised SCS technique, crystalline transuranic-doped zirconate pyrochlores were formed for the first time without the need for a subsequent heating step. Typically, materials rapidly synthesized in a single-step self-sustaining exothermic reaction require further heating to induce crystallization and purify the product. The need for this secondary processing step can be attributed to factors such as an improper oxidizer to fuel ratio and the utilization of strong complexing compounds as fuels (i.e., reducing agents), all of which hinder complete combustion. The efficacy of the developed process was demonstrated by fabricating crystalline plutonium-doped Gd2Zr2O7 from solutions containing metal nitrates and urea in a properly tuned ratio

Burton-Allen, Janiya D.↗

SUBSURFACE MOBILE PLUTONIUM SPECIATION: SAMPLING ARTIFACTS FOR GROUNDWATER COLLOIDS

A recent review found several conflicting conclusions regarding colloid-facilitated transport of radionuclides in groundwater and noted that colloids can both facilitate and retard transport. Given these contrasting conclusions and the profound implications even trace concentrations of plutonium (Pu) have on the calculated risk posed to human health, it is important that the methodology used to sample groundwater colloids be free of artifacts. The objective of this study was: (1) to conduct a field study and measure Pu speciation, ({sup 239}Pu and {sup 240}Pu for reduced-Pu{sub aq}, oxidized-Pu{sub aq}, reduced-Pu{sub colloid}, and oxidized-Pu{sub colloid}), in a Savannah River Site (SRS) aquifer along a pH gradient in F-Area, (2) to determine the impact of pumping rate on Pu concentration, Pu speciation, and Pu isotopic ratios, (3) determine the impact of delayed sample processing (as opposed to processing directly from the well).

54 ENVIRONMENTAL SCIENCES↗

Adsorption of the Lighter Homologs of Element 104 and Element 105 on DGA Resin from Various Mineral Acids

The goal of studying transactinide elements is to further understand the fundamental principles that govern the periodic table. The current periodic table arrangement allows for the prediction of the chemical behavior of elements. The correct position of a transactinide element can be assessed by investigating its chemical behavior and comparing it to that of the homologs and pseudo-homologs of a transactinide element. Homologs of a transactinide element are the elements in the same group of the periodic table as the transactinide. A pseudo-homolog of a transactinide element is an element with a similar main oxidation state and similar ionic radius to the transactinide element. For example, the homologs of rutherfordium, Rf, are titanium, zirconium and hafnium (Ti, Zr and Hf); the pseudo homologs of Rf are thorium, Th, and plutonium, Pu. Understanding the chemical behavior of a transactinide element compared to its homologs and pseudo-homologs also allows for the assessment of the role of relativistic effects. Relativistic effects occur when the velocity of the s orbital electrons closest to the nucleus approaches the speed of light. These electrons approach the speed of light because they have no orbital momentum. This causes two effects, first there is in a decrease in Bohr radius of the inner electronic orbitals because of this there is an increase in particle mass. A contraction of outer s and p orbitals is also seen. The contraction of these orbitals results in an energy destabilization of the outer most shell, in the case of transactinides this would be the 5f and 6d orbitals. The outer most d shell and all f shells can also experience a radial expansion due to these orbitals being screened from the effective nuclear charge. Another relativistic effect is the 'spin-orbit splitting' for p, d and f orbitals into j = 1 {+-} 1/2 states. Where j is the total angular momentum vector and 1 is angular quantum number. All of these effects have the same order of magnitude and increase roughly according to Z. This feature is what makes studying the heavy elements so interesting because the chemical properties of transactinide elements should strongly exhibit these effects. For this work the terms heavy element and transactinide elements will be used interchangeably and are defined as elements with an atomic number greater than 103, Z > 103. In order to study the transactinide elements they must be isolated once they have been produced and transported to a chemistry apparatus. The transactinide elements are produced either via 'hot' or 'cold' fusion reactions. 'Hot' fusion reactions result in excitation energies of the compound nucleus of 40-50 MeV and occur when an actinide target nuclei fuse with a projectile with A < 40, where A is the atomic mass number. 'Cold' fusion results in excitation energies of 10-15 MeV. Cold fusion conditions tend to occur when a target of a spherical nuclei (Pb or Bi) is bombarded with a heavy projectile (A > 40). Hot fusion generally leads to neutron rich isotopes and cold fusion tends to produce a compound nucleus that emits 1-2 neutrons upon de-excitation. If a sufficiently thin target is employed, then the products of the nuclear reaction will recoil out of the target and can either be transported to the chemistry setup, e.g. using a gas jet, or trapped by implementing them on a catcher. An example for a catcher setup using a copper block as a catcher is described here. The copper block is placed behind the target during the irradiation and all nuclei recoiling from the target position will implant themselves in the block. The copper block is subsequently dismounted and sputter cleaned. It is then shaved with a micro-lathe. The 7-10 {micro}m copper shavings are then subjected to chemical separation. The copper is dissolved in aqua regia. Lanthanum carrier is added to the aqua regia to precipitate tri-, tetra- and penta- valent cations when ammonium hydroxide is added. The precipitate is then washed and converted to the nitrate form. This solution is then added onto a cation exchange column, the eluent is deposited and dried on a polypropylene film and then counted on solid state detectors. There are several challenges when studying the chemical behavior of transactinide elements. The first challenge is the low production rate of transactinides. Transactinides are produced on an atom-at-a-time basis, meaning that only one atom is ever available for chemical study. Because of this the chemical system being used must be selective for only one chemical state. The second challenge in transactinide chemistry is the short half-lives of the elements. Half-lives of the transactinides range from nanoseconds to a few hours. This leads to the need for fast chemistry. Another challenge is the need for a high degree of separation from interfering radionuclides so that the event with the transactinide element can be detected.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Re-evaluation of the Gamma Radiolysis Radiation Chemistry of Neptunium

The reprocessing of spent nuclear fuel by solvent extraction techniques starts with dissolving fuel in concentrated nitric acid (HNO{sub 3}). The resulting radioactive liquor is subjected to multiple stages of solvent extraction to partition desired metal ions (e.g. uranium, plutonium, and neptunium) into an organic phase using specialized extractants. Under process conditions the solvent system is continuously exposed to a high intensity radiation field, which induces radiolytic degradation of both the diluent and extractants. This degradation occurs through the formation of radicals, as well as degradation products. Moreover, both radicals and degradation products can undergo redox chemistry with metal ions within the solvent system. This can be particularly problematic for metals such as neptunium which depend on the maintenance of a particular valence state amenable to complexation by extractants such as tributylphosphate in the PUREX (Plutonium Uranium Redox Extraction) process. Neptunium (Np) is well extracted when it is Np(IV) and Np(VI) but almost unextractable when Np(V). A recently study showed that the radiolysis of Np (VI) in acidic (4 M HNO{sub 3}) solution underwent reduction to Np(V). This reduction only occurred after sufficient production of nitrous acid (HNO{sub 2}) which countered the action of radiolytically-produced oxidizing free radicals (nitrate radical, NO{sub 3}{sup .} and hydroxyl radical, {sup .}OH). This radiation-induced chemistry was successfully modeling using a simplified kinetic model, that included a reaction set for water radiolysis, plus published rate constants for the reactions of free radicals with Np(VI) and Np(V). The most sensitive reaction rate constants were identified in this model, and optimization of the five most sensitive was performed to get excellent model agreement with the experimental data. No Np(IV) was observed or predicted by the model under these conditions. The present research re-evaluates this radiation chemistry of neptunium in aerated aqueous solutions of HNO; by using a far more comprehensive FACSIMILE code. We have also extended this modeling to study the radiolytically-induced Np redox chemistry occurring under multiple other nitric acid acidities, to fully characterize the importance of the oxidizing radical and reducing nitrous acid reactions under a range of conditions relevant to large-scale process conditions. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Comparison of Industrialized Late 20th Century Flowsheets for Reprocessing Used Nuclear Fuel

This study identified and compared three flowsheets for reprocessing used nuclear fuel (UNF) industrialized in plants in the United Kingdom (the Thermal Oxide Reprocessing Plant), France (UP2-800/UP3) and Japan (the Rokkasho Reprocessing Plant). The study also identified the major implications for a plant in the United States if it were initiated. All flowsheets employed the established Plutonium Uranium Reduction Extraction (PUREX) solvent extraction technology to separate uranium and plutonium from UNF dissolved in nitric acid. However, differences in the approaches to managing iodine-129, tritium and technetium were identified in the flowsheets. A US plant would also need to separate krypton-85 as well as iodine-129 and tritium for immobilization and disposal.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Plutonium and Cerium Perrhenate/Pertechnetate Coordination Polymers and Frameworks

Spent nuclear fuel (SNF) contains transuranic and lanthanide species, which are sometimes recovered and repurposed. One particularly problematic fission product, 99 TcO 4 – , hampers this recovery via coextraction with high valence metals, perhaps by complexation during aqueous reprocessing of SNF. There is limited molecular-level knowledge concerning the coordination chemistry between TcO 4 – or its well-known surrogate ReO 4 – and transuranic/lanthanide species. In the current study, we investigated the coordination of ReO 4 – /TcO 4 – with plutonium and cerium cations by structural and chemical characterization of a series of isolated extended solids. In this study, Ce represents both trivalent lanthanides and is considered a surrogate for Pu, respectively, in its common trivalent and tetravalent oxidation states. The structural elucidation of the seven isolated crystalline solids revealed that ReO 4 – /TcO 4 – directly connects to Pu IV , Pu VI O 2 2 + , Ce III , and Ce IV in the terminal and bridging coordination modes, leading to 1-, 2-, and 3-dimensional frameworks. For example, ReO 4 – coordination to Pu(IV) formed a 1D chain or 2D framework, isostructural with previously isolated Th(IV) compounds. However, Pu VI O 2 2 + alternating with ReO 4 – led to a unique 1D chain, different from the prior-reported U(VI)/Np(VI)-ReO 4 – /TcO 4 – structures. Coordination of ReO 4 – /TcO 4 – with Ce(III) promotes the assembly of 3D frameworks. Finally, attempted synthesis of a Ce(IV)-ReO 4 – compound resulted in a 2D framework with a mixed-valence Ce III/IV . The highly acidic reaction conditions supported the reduction of both Ce IV and Tc VII , challenging isolation of compounds featuring these species. Only one TcO 4 -containing structure was obtained in this study (Ce III –TcO 4 3D framework), vs the six total Ce/Pu-ReO 4 compounds. Furthermore, our three Pu-ReO 4 crystal structures are the first reported and translated to atomic-level information about Pu-TcO 4 coordination in nuclear fuel reprocessing scenarios, in addition to broadening our knowledge of bonding trends in the early, high-valence actinides.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Water Solubility of Plutonium and Uranium Compounds and Residues at TA-55

Understanding the water solubility of plutonium and uranium compounds and residues at TA-55 is necessary to provide a technical basis for appropriate criticality safety, safety basis and accountability controls. Individual compound solubility was determined using published solubility data and solution thermodynamic modeling. Residue solubility was estimated using a combination of published technical reports and process knowledge of constituent compounds. The scope of materials considered includes all compounds and residues at TA-55 as of March 2016 that contain Pu-239 or U-235 where any single item in the facility has more than 500 g of nuclear material. This analysis indicates that the following materials are not appreciably soluble in water: plutonium dioxide (IDC=C21), plutonium phosphate (IDC=C66), plutonium tetrafluoride (IDC=C80), plutonium filter residue (IDC=R26), plutonium hydroxide precipitate (IDC=R41), plutonium DOR salt (IDC=R42), plutonium incinerator ash (IDC=R47), uranium carbide (IDC=C13), uranium dioxide (IDC=C21), U 3 O 8 (IDC=C88), and uranium filter residue (IDC=R26). This analysis also indicates that the following materials are soluble in water: plutonium chloride (IDC=C19) and uranium nitrate (IDC=C52). Equilibrium calculations suggest that PuOCl is water soluble under certain conditions, but some plutonium processing reports indicate that it is insoluble when present in electrorefining residues (R65). Plutonium molten salt extraction residues (IDC=R83) contain significant quantities of PuCl 3 , and are expected to be soluble in water. The solubility of the following plutonium residues is indeterminate due to conflicting reports, insufficient process knowledge or process-dependent composition: calcium salt (IDC=R09), electrorefining salt (IDC=R65), salt (IDC=R71), silica (IDC=R73) and sweepings/screenings (IDC=R78). Solution thermodynamic modeling also indicates that fire suppression water buffered with a commercially-available phosphate buffer would significantly reduce the solubility of PuCl 3 by the precipitation of PuPO 4 .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

New Density Functional Theory Approaches for Enabling Prediction of Chemical and Physical Properties of Plutonium and Other Actinides

Density Functional Theory (DFT) based Equation of State (EOS) construction is a prominent part of Sandia's capabilities to support engineering sciences. This capability is based on amending experimental data with information gained from computational investigations, in parts of the phase space where experimental data is hard, dangerous, or expensive to obtain. A prominent materials area where such computational investigations are hard to perform today because of limited accuracy is actinide and lanthanide materials. The Science of Extreme Environment Lab Directed Research and Development project described in this Report has had the aim to cure this accuracy problem. We have focused on the two major factors which would allow for accurate computational investigations of actinide and lanthanide materials: (1) The fully relativistic treatment needed for materials containing heavy atoms, and (2) the needed improved performance of DFT exchange-correlation functionals. We have implemented a fully relativistic treatment based on the Dirac Equation into the LANL code RSPt and we have shown that such a treatment is imperative when calculating properties of materials containing actinides and/or lanthanides. The present standard treatment that only includes some of the relativistic terms is not accurate enough and can even give misleading results. Compared to calculations previously considered state of the art, the Dirac treatment gives a substantial change in equilibrium volume predictions for materials with large spin-orbit coupling. For actinide and lanthanide materials, a Dirac treatment is thus a fundamental requirement in any computational investigation, including those for DFT-based EOS construction. For a full capability, a DFT functional capable of describing strongly correlated systems such as actinide materials need to be developed. Using the previously successful subsystem functional scheme developed by Mattsson et.al., we have created such a functional. In this functional the Harmonic Oscillator Gas is providing the necessary reference system for the strong correlation and localization occurring in actinides. Preliminary testing shows that the new Hao-Armiento-Mattsson (HAM) functional gives a trend towards improved results for the crystalline copper oxide test system we have chosen. This test system exhibits the same exchange-correlation physics as the actinide systems do, but without the relativistic effects, giving access to a pure testing ground for functionals. During the work important insights have been gained. An example is that currently available functionals, contrary to common belief, make large errors in so called hybridization regions where electrons from different ions interact and form new states. Together with the new understanding of functional issues, the Dirac implementation into the RSPt code will permit us to gain more fundamental understanding, both quantitatively and qualitatively, of materials of importance for Sandia and the rest of the Nuclear Weapons complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pilot-Scale Removal of Fluoride from Legacy Plutonium Materials Using Vacuum Salt Distillation

Between September 2009 and January 2011, the Savannah River National Laboratory (SRNL) and HB-Line designed, developed, tested, and successfully deployed a system for the distillation of chloride salts. In 2011, SRNL adapted the technology for the removal of fluoride from fluoride-bearing salts. The method involved an in situ reaction between potassium hydroxide (KOH) and the fluoride salt to yield potassium fluoride (KF) and the corresponding oxide. The KF and excess KOH can be distilled below 1000°C using vacuum salt distillation (VSD). The apparatus for vacuum distillation contains a zone heated by a furnace and a zone actively cooled using either recirculated water or compressed air. During a vacuum distillation operation, a sample boat containing the feed material is placed into the apparatus while it is cool, and the system is sealed. The system is evacuated using a vacuum pump. Once a sufficient vacuum is attaned, heating begins. Volatile salts distill from the heated zone to the cooled zone where they condense, leaving behind the non-volatile material in the feed boat. Studies discussed in this report were performed involving the use of non-radioactive simulants in small-scale and pilot-scale systems as well as radioactive testing of a small-scale system with plutonium-bearing materials. Aspects of interest include removable liner design considerations, boat materials, in-line moisture absorption, and salt deposition.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Reduction of Plutonium(VI) to (V) by Hydroxamate Compounds at Environmentally Relevant pH

Natural organic matter is known to influence the mobility of plutonium (Pu) in the environment via complexation and reduction mechanisms. Hydroxamate siderophores have been specifically implicated due to their strong association with Pu. Hydroxamate siderophores can also break down into di and mono-hydroxamates and may influence Pu oxidation state, and thereby its mobility. In this study we explored the reactions of Pu(VI) and Pu(V) with a mono-hydroxamate compound (acetohydroxamic acid, AHA) and a tri-hydroxamate siderophore desferrioxamine B (DFOB) at environmentally relevant pH (5.5-8.2). Pu(VI) was instantaneously reduced to Pu(V) upon reaction with AHA. The presence of hydroxylamine was not observed at these pHs; however, AHA was consumed during the reaction. This suggests that the reduction of Pu(VI) to Pu(V) by AHA is facilitated by direct one electron transfer. Importantly, further reduction to Pu(IV) or Pu(III) was not observed, even with excess AHA. We believe that further reduction of Pu(V) did not occur because Pu(V) does not form a strong complex with hydroxamate compounds at circum-neutral pH. Experiments performed using desferrioxamine B (DFOB) yielded similar results. Broadly, this suggests that Pu(V) reduction to Pu(IV) in the presence of natural organic matter is not facilitated by hydroxamate functional groups and that other natural organic matter moieties likely play a more prominent role.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The DISTINCTIVE University Consortium: Transforming High Activity Materials Research in the UK - 18212

The DISTINCTIVE consortium (Decommissioning, Immobilisation and Storage Solutions for Nuclear Waste Inventories) is a partnership of 11 research universities, working to decommission and clean up the legacy of civil nuclear energy generation, sponsored by the Engineering and Physical Sciences Research Council (EPSRC). An important component of the research programme is to develop the skills and facilities to address key research questions, requiring the use of highly radioactive materials. Here we highlight the outcomes of four research projects in which access to state of the art research facilities for working with radioactive materials, supported by international partnerships, has advanced research in plutonium storage and immobilisation, and the disposal of spent nuclear fuels. First, we have developed a viable formulation and process for immobilisation of the UK plutonium stockpile, including commissioning of a radiological hot isostatic press and validation studies using plutonium-239. Second, we have further underpinned the interim storage of PuO{sub 2}, through understanding of water and chlorine sorption / desorption, pertinent to the historic practice of containment within, and degradation of PVC bags. Third, we have developed a novel methodology to investigate the in situ radiolysis induced dissolution of actinide oxide thin films, using synchrotron radiation, to underpin the geological disposal of spent nuclear fuel. Fourth we monitored in situ the oxidation and self-ignition mechanism of uranium carbide, a legacy fuel from the Dounreay Prototype Fast Reactor that is waiting for oxidation treatment prior to permanent storage and/or disposal. Through this programme of research, the DISTINCTIVE consortium is rebuilding the UK capability for research with transuranic materials, which, hitherto, was eroded over decades of disinvestment. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗