Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASMA DENSITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

On the feasibility of electron cyclotron heating of overcritical plasma in a magnetic mirror trap

The feasibility of matching electromagnetic radiation in the electron cyclotron frequency range to a dense plasma in an open magnetic trap by producing an inverted (with a minimum on the axis) plasma density profile is discussed. The use of such a profile shows promise for the implementation of efficient cyclotron heating at plasma densities above the critical density, at which the Langmuir frequency is equal to the heating radiation frequency. Examples of the magnetic field and plasma density distributions in a mirror trap are presented for which analysis of the beam trajectories shows the feasibility of efficient electron cyclotron absorption of microwave beams in overcritical plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Application of new simulation algorithms for modeling rf diagnostics of electron clouds

Traveling wave rf diagnostics of electron cloud build-up show promise as a non-destructive technique for measuring plasma density and the efficacy of mitigation techniques. However, it is very difficult to derive an absolute measure of plasma density from experimental measurements for a variety of technical reasons. Detailed numerical simulations are vital in order to understand experimental data, and have successfully modeled build-up. Such simulations are limited in their ability to reproduce experimental data due to the large separation of scales inherent to the problem. Namely, one must resolve both rf frequencies in the GHz range, as well as the plasma modulation frequency of tens of MHz, while running for very long simulations times, on the order of microseconds. The application of new numerical simulation techniques allow us to bridge the simulation scales in this problem and produce spectra that can be directly compared to experiments. The first method is to use a plasma dielectric model to measure plasma-induced phase shifts in the rf wave. The dielectric is modulated at a low frequency, simulating the effects of multiple bunch crossings. This allows simulations to be performed without kinetic particles representing the plasma, which both speeds up the simulations as well as reduces numerical noise from interpolation of particle charge and currents onto the computational grid. Secondly we utilize a port boundary condition model to simultaneously absorb rf at the simulation boundaries, and to launch the rf into the simulation. This method improves the accuracy of simulations by restricting rf frequencies better than adding an external (finite) current source to drive rf, and absorbing layers at the boundaries. We also explore the effects of non-uniform plasma densities on the simulated spectra.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dependence of the Performance of the Long Pulse RF Driven Negative Ion Source on the Magnetic Filter Field

In the long pulse RF source the plasma drift caused by the magnetic filter field leads to different plasma parameters close to the top and bottom halves of the plasma. In order to investigate the effect of the plasma density on the extracted currents, the bottom grid halve was covered and the direction of the drift was converted by changing the polarity of the magnets. The asymmetry of the plasma density was measured by H{sub {beta}} spectroscopy. By biasing the plasma grid the asymmetry could be enlarged, but the current of co-extracted electrons could be minimized in a similar way for both polarities. The extracted currents of H{sup -} ions as well as of the electrons, however, depend only weakly on the direction of the drift i. e. on the plasma densities. The results indicate that the source performance is determined to a greater degree by the plasma sheath close to the plasma grid which is not yet accessible by diagnostics.

07 ISOTOPE AND RADIATION SOURCES↗

Evidence of cold bubble-like structure in START density limit plasmas

Cold bubble (CB) structures were observed in START density limit studies for the first time in a low aspect ratio tokamak. They seem related to minor and major disruption processes, clearly identified here as a trigger to those events. Enormous discrepancies on the CB velocities in several devices are reported. This shows that the physical mechanisms related to the time scales for its propagation should be revised. Several models related to CB formation and its role in the disruptive process or just in a plasma with the presence of sawteeth qualitatively predict a great part of the observations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

On the physical origin of the nozzle characteristic and its connection with the double-arcing phenomenon in a cutting torch

The nozzle current-voltage characteristic for a cutting arc is presented in this work. The measurements are reported using a high energy density cutting arc torch with a nozzle bore radius of 0.5 mm. The arc current was fixed at 30 A while the plenum pressure and the oxygen gas mass flow rate were varied in the range of 0.55-0.65 MPa and 0.32-0.54 g s{sup -1}, respectively. The results show a very low electron density and the lack of electron attachment at the plasma boundary layer. No ion saturation current was found. For the smallest mass flow rate value gas breakdown was found for a biasing nozzle potential close to that of the cathode, but no evidence of such breakdown was found for the larger mass flow rate values. Using an expression for the ion speed at the entry of the collisional sheath formed between the nonequilibrium plasma and the negatively biased nozzle wall together with a generalized Saha equation coupled to the ion branch of the characteristic, the radial profile of the electron temperature, the spatial distribution of the plasma density at the plasma boundary, and the sheath thickness were obtained. In particular, the obtained thickness value at the breakdown condition was in good agreement with that obtained from the oxygen Paschen's curve. An electron temperature of about 4700-5700 K and a corresponding plasma density of the order of 10{sup 19}-10{sup 20} m{sup -3} were found close to the nozzle wall. A physical interpretation on the origin of the double-arcing phenomenon is presented, that explains why the double-arcing (that it is established when the sheath breaks down) appears at low values of the gas mass flow.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Drifting localization of ionization runaway: Unraveling the nature of anomalous transport in high power impulse magnetron sputtering

The plasma over a magnetron's erosion ''racetrack'' is not azimuthally uniform but concentrated in distinct dense ionization zones which move in the ExB direction with about 10% of the electron ExB/B{sup 2} drift velocity. The ionization zones are investigated with a gated camera working in concert with a streak camera for Al, Nb, Cu, and W targets in Ar or Kr background gas. It is found that each ionization zone has a high plasma density edge, which is the origin of a plasma-generating electron jet leaving the target zone. Each region of strong azimuthal plasma density gradient generates an azimuthal electric field, which promotes the escape of magnetized electrons and the formation of electron jets and plasma flares. The phenomena are proposed to be caused by an ionization instability where each dense plasma zone exhibits a high stopping power for drifting high energy electrons, thereby enhancing itself.

36 MATERIALS SCIENCE↗

The Viking solar corona experiment

The 1976 Mars solar conjunction resulted in complete occultations of the Viking spacecraft by the sun at solar minimum. During the conjunction period, coherent 3.5- and 13-cm wavelength radio waves from the orbiters passed through the solar corona and were received with the 64-m antennas of the NASA Deep Space Network. Data were obtained within at least 0.3 and 0.8 R sub s of the photosphere at the 3.5- and 13-cm wavelengths, respectively. The data can be used to determine the plasma density integrated along the radio path, the velocity of density irregularities in the coronal plasma, and the spectrum of the density fluctuations in the plasma. Observations of integrated plasma density near the south pole of the sun generally agree with a model of the corona which has an 8:1 decrease in plasma density from the equator to the pole. Power spectra of the 3.5- and 13-cm signals at a heliocentric radial distance of about 2 R sub s have a 1/2 power width of several hundred hertz and vary sharply with proximate geometric miss distance. Spectral broadening indicates a marked progressive increase in plasma irregularities with decreasing ray altitude at scales between about 1 and 100 km.

Tyler, G. L.↗

Magnetic Reconnection in High-Energy Density Laboratory Plasmas

This project involved theoretical research on radiative magnetic reconnection in High-Energy Density (HED) plasmas, with applications to laboratory laser-plasma experiments [on facilities like OMEGA (LLE) and NIF (LLNL)] and to astrophysical systems, such as accreting black hole coronae and magnetospheres of strongly magnetized neutron stars (magnetars and pulsars). Relativistic magnetic reconnection is a leading candidate mechanism for powering high-energy flares and persistent emission in various astrophysical systems.The extremely high energy density found in many of these systems dictates that reconnection should proceed in the radiative regime, where radiation back reaction on the electrons (and, if present, positrons), manifested, e.g., as radiative cooling and radiative drag on reconnection-driven bulk flows, plays an important role. Moreover, under some conditions, the energy of the emitted photons is so high that they can readily produce electron-positron pairs, e.g., in black-hole accretion disk coronae and in pulsar and magnetar magnetospheres. Due to recent rapid developments of experimental capabilities in HED physics, we can now for the first time seriously contemplate studying these exciting physical processes in the laboratory. This project investigated fundamental physics of magnetic reconnection in this novel regime, by performing several computational [using radiative particle-in-cell (PIC) simulations] and theoretical studies.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Current density and plasma displacement near perturbed rational surfaces

The current density in the vicinity of a rational surface of a force-free magnetic field subjected to an ideal perturbation is shown to be the sum of both a smooth and a delta-function distribution, which give comparable currents. The maximum perturbation to the smooth current density is comparable to a typical equilibrium current density and the width of the layer in which the current flows is shown to be proportional to the perturbation amplitude. In the standard linearized theory, the plasma displacement has an unphysical jump across the rational surface, but the full theory gives a continuous displacement. A resolution of the paradox of a jump in the displacement is required for interpreting perturbed tokamak equilibria.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Lower hybrid emission diagnostics on the NASA Lewis bumpy torus

The feasibility of using RF emission near the lower hybrid frequency of the NASA Lewis Bumpy Torus plasma for diagnostic purposes is examined. The emission is detected using a spectrum analyzer and a 50 omega miniature coaxial antenna that is sensitive to the polarization of the incoming signal. The frequency shift of the lower hybrid emission peak is monitored as a function of the background pressure, electrode voltage, electrode ring configuration and the strength of the toroidal dc magnetic field. Simultaneous measurements of the average plasma density are made with a polarization diplexing microwave interferometer. Data derived from the experiment are discussed with reference to the following: (1) the strength of the dc magnetic field in the emitting region; (2) comparison of the lower hybrid plasma density with the average plasma density; and (3) validity of the cold plasma lower hybrid resonance formula in the high density operating regime of the bumpy torus plasma.

Mallavarpu, R.↗

Contamination effects on fixed-bias Langmuir probes

Langmuir probes are standard instruments for plasma density measurements on many sounding rockets. These probes can be operated in swept-bias as well as in fixed-bias modes. In swept-bias Langmuir probes, contamination effects are frequently visible as a hysteresis between consecutive up and down voltage ramps. This hysteresis, if not corrected, leads to poorly determined plasma densities and temperatures. With a properly chosen sweep function, the contamination parameters can be determined from the measurements and correct plasma parameters can then be determined. In this paper, we study the contamination effects on fixed-bias Langmuir probes, where no hysteresis type effect is seen in the data. Even though the contamination is not evident from the measurements, it does affect the plasma density fluctuation spectrum as measured by the fixed-bias Langmuir probe. We model the contamination as a simple resistor-capacitor circuit between the probe surface and the plasma. We find that measurements of small scale plasma fluctuations (meter to sub-meter scale) along a rocket trajectory are not affected, but the measured amplitude of large scale plasma density variation (tens of meters or larger) is attenuated. From the model calculations, we determine amplitude and cross-over frequency of the contamination effect on fixed-bias probes for different contamination parameters. The model results also show that a fixed bias probe operating in the ion-saturation region is affected less by contamination as compared to a fixed bias probe operating in the electron saturation region.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Estimate of pre-thermal quench non-thermal electron density profile during Ar pellet shutdowns of low-density target plasmas in DIII-D

The radial density profile of pre-thermal quench (pre-TQ) early-time runaway electrons (REs) is estimated by combining electron cyclotron emission (ECE) and soft x-ray (SXR) data during rapid shutdown of low-density (n e ≲ 10 13 cm -3 ) DIII-D target plasmas with cryogenic argon pellet injection. This technique is limited in these experiments to the pre-TQ phase and quickly loses validity during the TQ. Two different cases are studied: a high (10 keV) temperature target and a lower (4 keV) temperature target. The results indicate that early-time, low-energy (~10 keV) REs form ahead of the argon pellet as it enters the plasma, affecting the pellet ablation rate; it is hypothesized that this may be caused by rapid cross-field transport of argon ions ahead of the pellet. Fokker-Planck modeling of the two shots suggests that the RE current is quite significant during the pre-TQ phase (up to 50% of the total current). Comparison between modeled pre-TQ RE current and post-TQ RE current inferred from avalanche theory suggests that RE current increases during the high temperature target TQ but decreases during the low temperature target TQ. Here, the uncertainties in this estimate are large; but, if true, this suggests that TQ loss of REs can be larger than previously estimated in DIII-D.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of plasma distribution in electron-focused electric field enhanced glow discharge plasma immersion ion implantation

In enhanced glow discharge plasma immersion ion implantation (EGDPIII) that involves a small pointed anode and large area tabular cathode, the high negative substrate bias not only acts as the plasma producer but also supplies the implantation voltage. Consequently, an electric field is created to focus the electrons and the electron-focusing field enhances the glow discharge process. In this work, the plasma distribution is measured using a Langmuir probe to obtain the plasma density. Numerical interpolation is performed to obtain the plasma density distribution throughout the entire discharge region. The effects of different distances between the anode and cathode on the glow discharge characteristics and the influence of the plasma electron density are also evaluated. Our results experimentally verify the electron-focusing phenomenon and suggest optimal processing windows for enhanced ionization rates and efficiency in EGDPIII.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simple model for wakefield excitation by intense short-pulse laser in underdense plasma

A simple analytical model for intense-laser interaction with low-density plasma is used to investigate the dependence of the wake structure on the laser parameters and the background plasma density. Many of the properties observed in the existing multidimensional particle-in-cell simulations are qualitatively recovered.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The nonlocal theory of periodic density drift instabilities

The nonlocal theory of electrostatic density drift instabilities is developed for an arbitrary, periodic variation in plasma density. Linear Vlasov theory is applied to Fourier series representations of the plasma density, and the resulting equations are solved numerically. The growth rates of the universal drift instability are compared by using local and nonlocal theories. It is demonstrated that the local theory is inadequate if the nonlocal eigenfunctions of the electrostatic modes have significant amplitude over spatial regions wider than the regions of large plasma density gradients. Nonlocal effects can enhance wave-particle diffusion of a triangular-shaped variation and reduce wave-particle dissipation of a square-shaped irregularity.

Bernhardt, P. A.↗

Wave propagation and noncollisional heating in neutral loop and helicon discharges

Heating mechanisms in two types of magnetized low pressure rf (13.56 MHz) discharges are investigated: a helicon discharge and a neutral loop discharge. Radial B-dot probe measurements demonstrate that the neutral loop discharge is sustained by helicon waves as well. Axial B-dot probe measurements reveal standing wave and beat patterns depending on the dc magnetic field strength and plasma density. In modes showing a strong wave damping, the plasma refractive index attains values around 100, leading to electron-wave interactions. In strongly damped modes, the radial plasma density profiles are mainly determined by power absorption of the propagating helicon wave, whereas in weakly damped modes, inductive coupling dominates. Furthermore, an azimuthal diamagnetic drift is identified. Measurements of the helicon wave phase demonstrate that initial plane wave fronts are bent during their axial propagation due to the inhomogeneous density profile. A developed analytical standing wave model including Landau damping reproduces very well the damping of the axial helicon wave field. This comparison underlines the theory whereupon Landau damping of electrons traveling along the field lines at speeds close to the helicon phase velocity is the main damping mechanism in both discharges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quantum correction to Landau damping of electron plasma waves

It is often assumed that quantum effects will be significant only in the low temperature and high density plasmas. In this paper this assumption is challenged by considering the quantum contribution to the Landau damping of electron plasma waves in normal temperature and high density plasmas. Starting from the linearized Vlasov equation which contains the Bohm quantum potential, the dispersion relation of electron plasma waves propagating in a quantum plasma is derived. A linear Landau damping rate and equations for this process are also deduced. Result indicates that quantum effects enlarge effective frequency of plasmas, which is attributed to an increase in charge or number density of plasma electrons. As a result, Debye length is reduced, and the Debye screening effect becomes obvious. So the quantum behavior appears screening effect here. Landau damping rate is reduced by quantum effects and the exchange of energy between particles and waves is retarded.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗