Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHASE LOCK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Helical ordering in the ground state of spin-one color superconductors as a consequence of parity violation

We investigate spin-one color superconductivity of a single quark flavor using the Ginzburg-Landau theory. First we examine the classic analysis of Bailin and Love and show that by restricting to the so-called inert states, it misses the true ground state in a part of the phase diagram. This suggests the use of the more general, noninert states, in particular, within three-flavor quark matter where the color neutrality constraint imposes stress on the spin-one pairing and may disfavor the symmetric color-spin-locked state. In the second part of the paper we show that, in analogy to some ferromagnetic materials, lack of space-inversion symmetry leads to a new term in the Ginzburg-Landau functional, which favors a spatially nonuniform long-range ordering with a spiral structure. In color superconductors, this new parity-violating term is a tiny effect of weak-interaction physics. The modified phase diagram is determined and the corresponding ground states for all the phases constructed. At the end, we estimate the coefficient of the new term in the free energy functional, and discuss its relevance for the phenomenology of dense quark matter.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

MO-H-19A-04: Multichannel CW Ultrasonic Thermometry for Imaging Therapeutic Dose Fields in Water

Purpose: To develop a scalable, multichannel ultrasonic thermometry system suitable for imaging clinical-beam dose distributions in a water phantom. Method: A small, glass-walled rectangular water phantom (15 cm × 20 cm × 30 cm) was filled with distilled water, and two ultrasonic transducers were placed on the outside, against opposing walls, approximately 5 cm below the water line, and were aligned to optimize transmission/reception of ultrasound between them. Two synchronized lock-in amplifiers were connected to the transducers to enable full-duplex operation of two separate ultrasonic frequency channels configured to transmit simultaneously through the same volume of water and thereby provide independent measurements of the temperature-dependent ultrasonic phase lag. Controlled heating of the water via immersed power resistors provided a means to study dependence of measured phase lag on temperature change for both channels; cross-correlation of the phase outputs enabled much smaller temperature fluctuations in the phantom to be used to ascertain the noise floor and achievable temperature resolution. Results: Temperature measurements from both channels, converted from phase measurements via polynomials available in the literature, exhibited the expected linear dependence of ultrasonic phase on temperature change (measured via calibrated thermistor probe). Cross-correlation analysis of phase fluctuations yielded rms noise estimates of approximately 1-2 microKelvin, comparable to that observed in standard water calorimeters. Conclusion: Phase-sensitive detection of cw ultrasound has been shown to provide temperature sensitivity needed for calorimetry of external treatment beams, and the present simple demonstration establishes that multiple channels may be run simultaneously without phase disturbances that currently affect time-of-flight techniques utilizing phase-detection. Immediate plans include doubling the number of sensors, to enable a simple tomographic reconstruction, and to test the system in Clinac x-rays and electron beams.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Robust Photon Locking

We experimentally demonstrate a strong-field coherent control mechanism that combines the advantages of photon locking (PL) and rapid adiabatic passage (RAP). Unlike earlier implementations of PL and RAP by pulse sequences or chirped pulses, we use shaped pulses generated by phase modulation of the spectrum of a femtosecond laser pulse with a generalized phase discontinuity. The novel control scenario is characterized by a high degree of robustness achieved via adiabatic preparation of a state of maximum coherence. Subsequent phase control allows for efficient switching among different target states. We investigate both properties by photoelectron spectroscopy on potassium atoms interacting with the intense shaped light field.

74 ATOMIC AND MOLECULAR PHYSICS↗

Photoinduced Nonequilibrium Topological States in Strained Black Phosphorus

Black phosphorus (BP), an elemental semiconductor, has attracted tremendous interest because it exhibits a wealth of interesting electronic and optoelectronic properties in equilibrium condition. The nonequilibrium electronic structures of bulk BP under a periodic field of laser remain unexplored, but can lead to intriguing topological optoelectronic properties. Here we show that, under the irradiation of circularly polarized light (CPL), BP exhibits a photon-dressed Floquet-Dirac semimetal state, which can be continuously tuned by changing the direction, intensity, and frequency of the incident laser. The topological phase transition from type-I to type-II Floquet-Dirac fermions manifests a new form of type-III phase, which exists in a wide range of intensities and frequencies of the incident laser. Furthermore, topological surface states exhibit nonequilibrium electron transport in a direction locked by the helicity of CPL. Our findings not only deepen our understanding of fundamental properties of BP in relation to topology but also extend optoelectronic device applications of BP to the nonequilibrium regime.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Transitory Topochemical Tailoring of a van der Waals Superconductor

Topochemical intercalation is widely used to access metastable phases with novel electronic properties, but the reverse reaction (deintercalation) typically restores the original state, limiting practical use. Here, in this study, we present a topochemical approach that employs a sacrificial intercalant that thermally decomposes to irreversibly lock in the new electronic state. Using 2-aminobutane as the sacrificial intercalant, we convert the van der Waals (vdW) material 1T-TiSe 2 into a superconductor and the vdW superconductor 2H-NbSe 2 into a nonsuperconducting metal, while preserving the ability to exfoliate the resulting crystals. We find that this transitory intercalation increases the electron density in both materials and partially suppresses the CDW in TiSe 2 . By tuning the thermolysis temperature, we can systematically vary the carrier density in TiSe 2 , enabling us to map its phase diagram. The superconductivity in TiSe 2 is retained in exfoliated flakes, although with a lower critical temperature. This transitory topochemical strategy enables access to new electronic states with precisely tuned carrier densities that are otherwise inaccessible through direct solid-state synthesis.

36 MATERIALS SCIENCE↗

Wigner crystal physics in quantum wires.

The physics of interacting quantum wires has attracted a lot of attention recently. When the density of electrons in the wire is very low, the strong repulsion between electrons leads to the formation of a Wigner crystal. We review the rich spin and orbital properties of the Wigner crystal, in both the one-dimensional and the quasi-one-dimensional regimes. In the one-dimensional Wigner crystal the electron spins form an antiferromagnetic Heisenberg chain with exponentially small exchange coupling. In the presence of leads, the resulting inhomogeneity of the electron density causes a violation of spin-charge separation. As a consequence the spin degrees of freedom affect the conductance of the wire. Upon increasing the electron density, the Wigner crystal starts deviating from the strictly one-dimensional geometry, forming a zigzag structure instead. Spin interactions in this regime are dominated by ring exchanges, and the phase diagram of the resulting zigzag spin chain has a number of unpolarized phases as well as regions of complete and partial spin polarization. Finally we address the orbital properties in the vicinity of the transition from a one-dimensional to a quasi-one-dimensional state. Due to the locking between chains in the zigzag Wigner crystal, only one gapless mode exists. Manifestations of Wigner crystal physics at weak interactions are explored by studying the fate of the additional gapped low-energy mode as a function of interaction strength.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Accelerating x-ray tracing for exascale systems using Kokkos

The upcoming exascale computing systems Frontier and Aurora will draw much of their computing power from GPU accelerators. The hardware for these systems will be provided by AMD and Intel, respectively, each supporting their own GPU programming model. The challenge for applications that harness one of these exascale systems will be to avoid lock-in and to preserve performance portability. We report here on our results of using Kokkos to accelerate a real-world application on NERSC's Perlmutter Phase 1 (using NVIDIA A100 accelerators) and Crusher, the testbed system for OLCF's Frontier (using AMD MI250X). By porting to Kokkos, we successfully ran the same X-ray tracing code on both systems and achieved speed-ups between 13 % and 66 % compared to the original CUDA code. Finally, these results are a highly encouraging demonstration of using Kokkos to accelerate production science code.

97 MATHEMATICS AND COMPUTING↗

TEM observation of the heat-affected zone in electron beam welded superalloy Inconel 713C

The paper presents results of microstructural observations and phase analysis of electron-beam-welded fusion zones in superalloy Inconel 713C using transmission electron microscopy. In the fusion zone, a 90% fraction of fine-grained {gamma}' precipitates was found, with sizes up to 30 nm. No dislocations were observed in the precipitates or at the {gamma}-{gamma}' interface. Primary, undissolved inclusions of {gamma}' were found in the heat-affected zone (HAZ). In the HAZ, a very high concentration of dislocations was found at the {gamma}-{gamma}' boundaries, as well as inside the {gamma}' particles and in the {gamma} solid solution. The increased dislocation density indicates loss of coherence of that phase and the creation of a semi-coherent boundary, and is related to dissolution of the particles and intensified diffusion through the interphase {gamma}-{gamma}' boundary. The lattice misfit coefficient {delta}a/a between the {gamma}' particles and {gamma} solution in the HAZ indicates negative values from - 0.20% to - 0.06%. The presence of semi-coherent boundaries and the negative lattice misfit coefficient leads to dislocation locking and can result in cracking in the HAZ.

36 MATERIALS SCIENCE↗

Enhanced MPM framework with multipatch isogeometric analysis for geotechnical applications

Achieving stable stress solutions at large strains using the Material Point Method (MPM) is challenging due to the accumulation of errors associated with geometry discretization, cell-crossing noise, and volumetric locking. Several simplified attempts exist in the literature to mitigate these errors, including higher-order frameworks. However, the stability of the MPM solution in such frameworks has been limited to simple geometries and the single-phase formulation (i.e., neglecting pore fluid). Although never explored, multipatch isogeometric analysis offers desirable qualities to simulate complex geometries while mitigating errors in the MPM. The degree of required high-order spatial integration has also never been investigated to infer a minimum limit for the stability of the stress solution in MPM. This paper presents a general-purpose numerical framework for simulating stable stresses in porous media, capturing both near incompressibility and multiphase interactions. First, the numerical framework is presented considering Non-Uniform Rational B-splines (NURBS) to perform isogeometric analysis (IGA) in MPM. Additionally, a volumetric strain smoothing algorithm is used to alleviate errors associated with volumetric locking. Second, the manifestation of cell-crossing errors is assessed via a series of problems with orders ranging from linear to cubic interpolation functions. Third, the use of NURBS is investigated and verified for problems with circular geometries. Finally, multipatch analysis is deployed to simulate plane strain and 3D penetration in soils, considering nearly incompressible elastoplastic (total stress) analysis and fully-coupled hydro-mechanical (effective stress) analysis. The stability of the solution is also analyzed for different constitutive models. From the results, it can be concluded that the framework using cubic interpolation functions with strain smoothing is the most convenient, presenting stable stress solutions for a broad range of multiphase geotechnical applications.

58 GEOSCIENCES↗

Polarization and dynamic phases of aligning active matter in periodic obstacle arrays

Here, we numerically examine a system of monodisperse self-propelled particles interacting with each other via simple steric forces and aligning torques moving through a periodic array of obstacles. Without obstacles, this system shows a transition to a polarized or aligned state for critical alignment parameters. In the presence of obstacles, there is still a polarization transition, but for dense enough arrays, the polarization is locked to the symmetry directions of the substrate. When the obstacle array is made anisotropic, at low densities the particles can form a quasi-isotropic state where the system can be polarized in any of the dominant symmetry directions. For intermediate anisotropy, the particles self-organize into a coherent lane state with one-dimensional polarization. In this phase, a small number of highly packed lanes are adjacent to less dense lanes that have the same polarization, but lanes further away can have the opposite polarization, so that global polarization is lost. For the highest anisotropy, hopping between lanes is suppressed, and the system forms uniformly dense uncoupled but polarized lanes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Detecting Phase-Resolved Magnetization Dynamics by Magneto-Optic Effects at 1550 nm Wavelength

We demonstrate the detection of phase-resolved magnetization dynamics with combinatorial magneto-optic Kerr and Faraday effects. The method uses a continuous-wave laser that is amplitude-modulated at the spin dynamic frequencies, and thus allows for coherent tracking of the spin dynamics, akin a “lock-in” type measurement. In particular, our method, using a single 1550-nmwavelength, probes simultaneously the ferromagnetic resonance of Y 3 Fe 5 O 12 (YIG) and Permalloy (Py = Ni 80 Fe 20 ) in a YIG-Pyhetero structure. The fiber-based magneto-optic components also have the advantage of being made into a compact, tabletop or even portable system with yet robust measurement performances. We believe that our method will be found useful in studying hybrid quantum magnonic systems and/or investigating phase-resolved spin dynamics in nanomagnet structures involving both ferromagnetic insulators and metals.

42 ENGINEERING↗

X-ray nanoprobe project at Taiwan Photon Source

The hard X-ray nanoprobe facility at Taiwan Photon Source (TPS) provides versatile X-ray analysis techniques, with tens of nanometer resolution, including XRF, XAS, XEOL, projection microscope, CDI, etc. Resulting from the large numerical aperture obtained by utilizing Montel KB mirrors, the beamline with a moderate length 75 meters can conduct similar performance with those beamlines longer than 100 meters. The two silica-made Montel mirrors are 45 degree cut and placed in a V-shape to eliminate the gap loss and the deformation caused by gravity. The slope error of the KB mirror pair is less than 0.04 µrad accomplished by elastic emission machining (EEM) method. For the beamline, a horizontal DCM and two-stage focusing in horizontal direction is applied. For the endstation, a combination of SEM for quickly positioning the sample, a fly scanning system with laser interferometers, a precise temperature control system, and a load lock transfer system will be implemented. In this presentation, the design and construction progress of the beamline and endstation is reported. The endstation is scheduled to be in commissioning phase in 2016.

43 PARTICLE ACCELERATORS↗

Active control of Type-I Edge-Localized Modes on JET

The operational domain for active control of type-I edge localized modes (ELMs) with an n = 1 external magnetic perturbation field induced by the ex-vessel error field correction coils on JET has been developed towards more ITER-relevant regimes with high plasma triangularity, up to 0.45, high normalized beta, up to 3.0, plasma current up to 2.0 MA and q95 varied between 3.0 and 4.8. The results of ELM mitigation in high triangularity plasmas show that the frequency of type-I ELMs increased by a factor of 4 during the application of the n = 1 fields, while the energy loss per ELM, W/W, decreased from 6% to below the noise level of the diamagnetic measurement (<2%). No reduction of confinement quality (H98Y) during the ELM mitigation phase has been observed. The minimum n = 1 perturbation field amplitude above which the ELMs were mitigated increased with a lower q95 but always remained below the n = 1 locked mode threshold. The first results of ELM mitigation with n = 2 magnetic perturbations on JET demonstrate that the frequency of ELMs increased from 10 to 35 Hz and a wide operational window of q95 from 4.5 to 3.1 has been found.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermal stability and adhesion of low-emissivity electroplated Au coatings.

We are developing a low-emissivity thermal management coating system to minimize radiative heat losses under a high-vacuum environment. Good adhesion, low outgassing, and good thermal stability of the coating material are essential elements for a long-life, reliable thermal management device. The system of electroplated Au coating on the adhesion-enhancing Wood's Ni strike and 304L substrate was selected due to its low emissivity and low surface chemical reactivity. The physical and chemical properties, interface bonding, thermal aging, and compatibility of the above Au/Ni/304L system were examined extensively. The study shows that the as-plated electroplated Au and Ni samples contain submicron columnar grains, stringers of nanopores, and/or H{sub 2} gas bubbles, as expected. The grain structure of Au and Ni are thermally stable up to 250 C for 63 days. The interface bonding is strong, which can be attributed to good mechanical locking among the Au, the 304L, and the porous Ni strike. However, thermal instability of the nanopore structure (i.e., pore coalescence and coarsening due to vacancy and/or entrapped gaseous phase diffusion) and Ni diffusion were observed. In addition, the study also found that prebaking 304L in the furnace at {ge} 1 x 10{sup -4} Torr promotes surface Cr-oxides on the 304L surface, which reduces the effectiveness of the intended H-removal. The extent of the pore coalescence and coarsening and their effect on the long-term system integrity and outgassing are yet to be understood. Mitigating system outgassing and improving Au adhesion require a further understanding of the process-structure-system performance relationships within the electroplated Au/Ni/304L system.

36 MATERIALS SCIENCE↗

Multiplexing Readout of TES Microcalorimeters Based on Analog Baseband Feedback

A TES microcalorimeter array is a promising spectrometer with excellent energy resolution and a moderate imaging capability. To realize a large format array in space, multiplexing the TES signals at the low tempersture stage is mandatory. We are developing frequency division multiplexing (FDM) based on baseband feedback technique. In FDM, each TES is AC-biased with a different carrier frequency. Signals from several pixels are summed and then read out by one SQUID. The maximum number of multiplexed pixels are limited by the frequency band in which the SQUID can be operated in a flux-locked loop, which is {approx}1 MHz with standard flux-locked loop circuit. In the baseband feedback, the signal ({approx}10 kHz band) from the TES is once demodulated. Then a reconstructed copy of the modulated signal with an appropriate phase is fed back to the SQUID input coil to maintain an approximately constant magnetic flux. This can be implemented even for large cable delays and automatically suppresses the carrier. We developed a prototype electronics for the baseband feedback based on an analog phase sensitive detector (PSD) and a multiplier. Combined with Seiko 80-SSA SQUID amp, open-loop gain of 8 has been obtained for 10 kHz baseband signal at 5 MHz carrier frequency, with a moderate noise contribution of 27pA/{radical}(Hz) at input.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

All quantum dot mode-locked semiconductor disk laser emitting at 655 nm

We present a semiconductor disk laser mode-locked by a semiconductor saturable absorber mirror (SESAM) with emission in the red spectral range. Both the gain and the absorber structure are fabricated by metal-organic vapor-phase epitaxy in an anti-resonant design using quantum dots as active material. A v-shaped cavity is used to tightly focus onto the SESAM, producing pulses with a duration of about 1 ps at a repetition rate of 852 MHz.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

GraphTango: A Hybrid Representation Format for Efficient Streaming Graph Updates and Analysis

Abstract Streaming graph processing performs batched updates and analytics on a time-evolving graph. The underlying representation format of the graph largely determines the throughputs of these updates and analytics phases. Existing representation formats usually employ variations of hash tables or adjacency lists. However, a recent study showed that the adjacency-list-based approaches perform poorly on heavy-tailed graphs, and the hash table-based approaches suffer on short-tailed graphs. We propose GraphTango, a hybrid representation format that provides excellent update and analytics throughput regardless of the graph’s degree distribution. GraphTango dynamically switches among three different formats based on a vertex’s degree: (i) Low-degree vertices store the edges directly with the neighborhood metadata, confining accesses to a single cache line, (2) Medium-degree vertices use adjacency lists, and (3) High-degree vertices use hash tables as well as adjacency lists. In this case, the adjacency list provides fast traversal during the analytics phase, while the hash table provides constant-time lookups during the update phase. We further optimized the performance by designing an open-addressing-based hash table that fully utilizes every fetched cache line. In addition, we developed a thread-local lock-free memory pool that allows fast growing/shrinking of the adjacency lists and hash tables in a multi-threaded environment. We evaluated GraphTango with the help of the SAGA-Bench framework and compared it with four other representation formats: Stinger, Degree-aware Robin Hood Hashing, and two adjacency list-based formats with different workload balancing scheme. On average, GraphTango provides 4.5x higher insertion throughput, 3.2x higher deletion throughput, and 1.1x higher analytics throughput over the next best format. Furthermore, we integrated GraphTango with the state-of-the-art graph processing frameworks DZiG and RisGraph. Compared to the vanilla DZiG and vanilla RisGraph , [ GraphTango + DZiG ] and [ GraphTango + RisGraph ] reduces the average batch processing time by 2.3x and 1.5x, respectively.

Ahmed, Alif↗