Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PARTIAL PRESSURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

A current modulation in the Gd{sub 2}O{sub 3}/Si/Gd{sub 2}O{sub 3} quantum well structure as a mean to monitor oxygen vacancies

The Gd{sub 2}O{sub 3} layer grown by electron beam evaporation system normally leads to oxygen deficient sites unless the oxygen partial pressure is provided. These oxygen vacancies were monitored through their current modulating effect. This modulation controlled the current within a Si well of the Gd{sub 2}O{sub 3}/Si/Gd{sub 2}O{sub 3} quantum well structure through the migration of the oxygen vacancies. Such behavior were not found in the structure that contains far less oxygen vacancy such as SiO{sub 2}/Si/SiO{sub 2} structure.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Modelling chemical degradation of concrete during leaching with rain and soil water types

Percolation of external water through concrete results in the degradation of cement and changes the concrete pore water and solid phase composition. The assessment of long-term degradation of concrete is possible by means of model simulation. This paper describes simulations of chemical degradation of cement for different types of rain and soil water at an ambient earth surface temperature (10 {sup o}C). Rain and soil water types were derived using generic equations and measurement of atmospheric boundary conditions representative for North-Belgium. An up-to-date and consistent thermodynamic model is used to calculate the geochemical changes during chemical degradation of the concrete. A general pattern of four degradation stages was simulated with the third stage being the geochemically most complex stage involving reactions with calcium-silicate hydrates, AFm and AFt phases. Whereas the sequence of the dissolution reactions was relatively insensitive to the composition of the percolating water, the duration of the different reactions depends strongly on the percolating water composition. Major identified factors influencing the velocity of cement degradation are the effect of dry deposition and biological activity increasing the partial pressure of CO{sub 2(g)} in the soil air phase (and thus increasing the inorganic carbon content in the percolating water). Soil weathering processes have only a minor impact, at least for the relatively inert sandy material considered in this study.

36 MATERIALS SCIENCE↗

Characterization of a Si-SiO{sub 2} Mixture Generated from SiO(g) and CO(g)

The reaction between SiO(g) and CO(g) is a relevant intermediate reaction in the silicon production process. One of the products generated from this gas mixture is called by its color, brown condensate. In this paper, SiO(g) and CO(g) are produced from SiO{sub 2}-SiC pellets. The reaction between the two gases occurred on SiC particles. Inert gas was injected at different flows. The SiC particles were collected, and the brown condensate deposited on them was characterized by electron probe microanalysis, X-ray photoelectron spectroscopy, and focused ion beam preparation samples for transmission electron microscope analysis. The brown condensate consists of a mixture of Si spheres embedded in a SiO{sub 2} matrix. The compound generates in the temperature range from 1400 °C to 1780 °C (1673 K to 2053 K), and in the SiO(g) partial pressure range between 0.534 and 0.742, depending on the inert gas flow. SiC crystallites are located at the Si-SiO{sub 2} interface. Carbides are believed to generate from the reaction between liquid silicon and CO(g). Carbides may also precipitate from reaction between dissolved carbon and liquid silicon, but to a minor extent. Both mechanisms are believed to happen above the melting point of silicon and in the softening range of silica.

36 MATERIALS SCIENCE↗

Electron beam irradiation of dimethyl-(acetylacetonate) gold(III) adsorbed onto solid substrates

Electron beam induced deposition of organometallic precursors has emerged as an effective and versatile method for creating two-dimensional and three-dimensional metal-containing nanostructures. However, to improve the properties and optimize the chemical composition of nanostructures deposited in this way, the electron stimulated decomposition of the organometallic precursors must be better understood. To address this issue, we have employed an ultrahigh vacuum-surface science approach to study the electron induced reactions of dimethyl-(acetylacetonate) gold(III) [Au{sup III}(acac)Me{sub 2}] adsorbed onto solid substrates. Using thin molecular films adsorbed onto cooled substrates, surface reactions, reaction kinetics, and gas phase products were studied in the incident energy regime between 40 and 1500 eV using a combination of x-ray photoelectron spectroscopy (XPS), reflection absorption infrared spectroscopy (RAIRS), and mass spectrometry (MS). XPS and RAIRS data indicate that electron irradiation of Au{sup III}(acac)Me{sub 2} is accompanied by the reduction in Au{sup III} to a metallic Au{sup 0} species embedded in a dehydrogenated carbon matrix, while MS reveals the concomitant evolution of methane, ethane, carbon monoxide, and hydrogen. The electron stimulated decomposition of Au{sup III}(acac)Me{sub 2} is first-order with respect to the surface coverage of the organometallic precursor, and exhibits a rate constant that is proportional to the electron flux. At an incident electron energy of 520 eV, the total reaction cross section was {approx_equal}3.6x10{sup -16} cm{sup 2}. As a function of the incident electron energy, the maximum deposition yield was observed at {approx_equal}175 eV. The structure of discrete Au-containing deposits formed at room temperature by rastering an electron beam across a highly ordered pyrolytic graphite substrate in the presence of a constant partial pressure of Au{sup III}(acac)Me{sub 2} was also investigated by atomic force microscopy.

36 MATERIALS SCIENCE↗

Defect disorder in UO{sub 2}

A defect disorder model has been developed to determine equilibrium off-stoichiometry and its spatial variations in UO{sub 2} crystals. The model gives the concentrations of atomic defects and electronic carriers as functions of oxygen partial pressure and temperature in the bulk and near crystal surfaces subject to an oxygen environment. Energetic parameters from published density functional theory calculations have been integrated into the defect disorder model for an accurate determination of the defect density and off-stoichiometry. The ionosorption theory has been used to couple the oxygen environment with the defect state in the crystal as we solved for the defect disorder near crystal surfaces. Contrary to the common belief that hyper-stoichiometry of UO{sub 2} is dominated by oxygen interstitials, the current model predicts that this regime is rather dominated by uranium vacancies. The model predictions also show that, in the presence of surfaces, the point defect concentrations vary by orders of magnitude in the subsurface region relative to the bulk region. Highlights: • Defect disorder in bulk UO2+x is modeled in terms of temperature and oxygen pressure. • The densities of atomic defects and electronic charge carriers are determined. • The model is extended to study the heterogeneity of defect density near crystal surfaces. • The surface effect is modeled using ionosorption theory. • The dominant defect type and off-stoichiometry profile near surface are found.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Voltage-dependent resistance of undoped rutile, TiO{sub 2}, ceramics

Lightly reduced rutile ceramics are n-type semiconductors whose resistance increases reversibly by 1–2 orders of magnitude, depending on temperature, on application of a small dc bias of 10–100 V cm{sup −1}. A similar effect is seen on changing the oxygen partial pressure surrounding the sample during impedance measurements and the bias dependence is attributed to changes in the equilibria between various ionised oxygen species adsorbed on sample surfaces, leading to changes in the mobile electron concentration in the sample bulk. The increase in resistance of n-type TiO{sub 2} with dc bias mirrors the decrease in resistance seen with p-type semiconductors such as acceptor-doped BaTiO{sub 3} and represents an effect, which has certain memristive characteristics but also significant differences.

36 MATERIALS SCIENCE↗

Measuring temperature-dependent water vapor and gas permeation through high barrier films

A new test device for temperature-dependent permeation measurement, existing of a mass spectrometer and sample holders inside a climatic chamber was developed. The front face of a sample is loaded with the atmosphere in the cabinet or a test gas mixture, respectively. The permeated species are accumulated in a cell behind the sample. The increasing partial pressures of the permeants are measured by the mass spectrometer and than transferred into a transmission rate. The time-lag technique enables the determination of the diffusion coefficient. Results are given for atmospheric components as O{sub 2}, N{sub 2}, and water vapor permeated through different barrier films and laminates at temperatures from 23 to 80 deg. C. The limits of the detection of the transmission rates are in the range of 10{sup -6} g/m{sup 2} d.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Polarization Resistance of La0.85Ca0.15MnO3 Cathodes for Solid Oxide Fuel Cells (SOFCs) Measured Using Patterned Electrodes

Patterned cathodes of calcium-doped lanthanum manganite (LCM) were fabricated on polycrystalline yttria-stabilized zirconia (YSZ) substrates by RF magnetron sputtering and photolithographic techniques. Samples were generated with a constant electrode/electrolyte contact area but different three phase boundary (TPB) lengths (lTPB's). Electrochemical impedance spectroscopy (EIS) was performed in the oxygen partial pressure (pO2) and temperature range of 10-3 atm to 1.00 atm and 600-800 C respectively. The area specific polarization resistance, Rp, was found to scale linearly with the inverse of lTPB, suggesting that the TPB is the active region for oxygen reduction. The resistivity decreased with increased temperature and pO2 and showed an activation energy of 1.17 +/- 0.03 eV.

(SOFCs)↗

Determination of the origin of dissolved inorganic carbon in groundwater around a reclaimed landfill in Otwock using stable carbon isotopes

Highlights: • Research showed the origin of DIC in the groundwater around a reclaimed landfill. • Carbon isotope was used to evaluate the contributions of carbon from different sources. • The leachate-contaminated water was isotopically distinct from the natural groundwater. • DIC in the natural groundwater comes from organic matter and dissolution of carbonates. • In the contaminated water, DIC comes from organic matter in the aquifer and landfill. - Abstract: Chemical and isotopic analyses of groundwater from piezometers located around a reclaimed landfill in Otwock (Poland) were performed in order to trace the origin of dissolved inorganic carbon (DIC) in the groundwater. Due to differences in the isotopic composition of carbon from different sources, an analysis of stable carbon isotopes in the groundwater, together with the Keeling plot approach and a two-component mixing model allow us to evaluate the relative contributions of carbon from these sources in the groundwater. In the natural (background) groundwater, DIC concentrations and the isotopic composition of DIC (δ{sup 13}C{sub DIC}) comes from two sources: decomposition of organic matter and carbonate dissolution within the aquifer sediments, whereas in the leachate-contaminated groundwater, DIC concentrations and δ{sup 13}C{sub DIC} values depend on the degradation of organic matter within the aquifer sediments and biodegradation of organic matter stored in the landfill. From the mixing model, about 4–54% of the DIC pool is derived from organic matter degradation and 96–46% from carbonate dissolution in natural conditions. In the leachate-contaminated groundwater, about 20–53% of the DIC is derived from organic matter degradation of natural origin and 80–47% from biodegradation of organic matter stored in the landfill. Partial pressure of CO{sub 2} (P CO{sub 2}) was generally above the atmospheric, hence atmospheric CO{sub 2} as a source of carbon in DIC pool was negligible in the aquifer. P CO{sub 2} values in the aquifer in Otwock were always one to two orders of magnitude above the atmospheric P CO{sub 2}, and thus CO{sub 2} escaped directly into the vadose zone.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Gold Nanoparticles Supported on Carbon Nitride: Influence of Surface Hydroxyls on Low Temperature Carbon Monoxide Oxidation

This paper reports the synthesis of 2.5 nm gold clusters on the oxygen free and chemically labile support carbon nitride (C3N4). Despite having small particle sizes and high enough water partial pressure these Au/C3N4 catalysts are inactive for the gas phase and liquid phase oxidation of carbon monoxide. The reason for the lack of activity is attributed to the lack of surface OH groups on the C3N4. These OH groups are argued to be responsible for the activation of CO in the oxidation of CO. The importance of basic OH groups explains the well document dependence of support isoelectric point versus catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correlation of magnetoelectric coupling in multiferroic BaTiO{sub 3}-BiFeO{sub 3} superlattices with oxygen vacancies and antiphase octahedral rotations

Multiferroic (BaTiO{sub 3}-BiFeO{sub 3}) × 15 multilayer heterostructures show high magnetoelectric (ME) coefficients α{sub ME} up to 24 V/cm·Oe at 300 K. This value is much higher than that of a single-phase BiFeO{sub 3} reference film (α{sub ME} = 4.2 V/cm·Oe). We found clear correlation of ME coefficients with increasing oxygen partial pressure during growth. ME coupling is highest for lower density of oxygen vacancy-related defects. Detailed scanning transmission electron microscopy and selected area electron diffraction microstructural investigations at 300 K revealed antiphase rotations of the oxygen octahedra in the BaTiO{sub 3} single layers, which are an additional correlated defect structure of the multilayers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structure analysis of BaCe{sub 0.8}Y{sub 0.2}O{sub 3−δ} in dry and wet atmospheres by high-temperature X-ray diffraction measurement

High temperature X-ray diffraction measurements were performed under dry and wet atmospheres to investigate phase behavior of BaCe{sub 0.8}Y{sub 0.2}O{sub 3−δ} (BCY20). In the temperature range of 30–400 °C, BCY20 was identified to be rhombohedral and monoclinic structures in dry and wet atmospheres, respectively. Larger lattice volumes were obtained in a wet atmosphere due to a chemical expansion induced by water incorporation. A gradual change in diffraction peak shape due to a phase transformation from rhombohedral to monoclinic was observed at 300 °C when moisture was introduced into the atmosphere. These results indicated clearly the dependence of phase behavior of BCY20 on partial pressure of water vapor in atmosphere. - Graphical abstract: A BaCe{sub 0.8}Y{sub 0.2}O{sub 3−δ} rhombohedral phase transited to a monoclinic phase at 300 °C when moisture was introduced into the atmosphere. Display Omitted - Highlights: • Different structures for hydrated and dehydrated BaCe{sub 0.8}Y{sub 0.2}O{sub 3−δ} (BCY20). • Slow phase transition from rhombohedral to monoclinic at 300 °C in wet atmosphere. • Chemical expansion of BCY20 in wet atmosphere. • Importance of considering moisture when discussing phase behavior of BCY20.

36 MATERIALS SCIENCE↗

Kinetics of SiC Formation on Graphite Using N{sub 2}-CO-SiO and N{sub 2}-CO-H{sub 2}-SiO Gas Mixtures

The formation of SiC on a graphite surface through the reaction between SiO gas and C was investigated. Experiments were conducted at 1843 K, 1873 K, and 1903 K (1570 °C, 1600 °C, and 1630 °C) under N{sub 2}-CO-SiO or N{sub 2}-CO-H{sub 2}-SiO gas mixture atmospheres. The formation rate of SiC on the graphite increased with the increasing temperature and with the decreasing partial pressure of CO gas. The forward (k{sub f}) and backward (k{sub b}) reaction rate constants of SiC formation with SiO gas were obtained as follows: lnk{sub f}(mol/cm{sup 2}⋅s⋅atm)=29.175−76,083/Tlnk{sub b}(mol/cm{sup 2}⋅s⋅atm)=53.518−129,072/TUnder the N{sub 2}-CO-H{sub 2}-SiO gas mixture atmosphere, the formation rate of SiC on the graphite increased. It was observed that the formation of SiC whiskers was enhanced by the catalytic reaction in liquid Fe-based nanodroplets.

36 MATERIALS SCIENCE↗

Phase transitions, electrical conductivity and chemical stability of BiFeO{sub 3} at high temperatures

The multiferroic perovskite BiFeO{sub 3} is reported to display two first order structural phase transitions. The structural phase transition at 925+-5 deg. C is demonstrated to be first order by calorimetry and dilatometry. Electrical conductivity measurements revealed that the high temperature phase above 925+-5 deg. C is semiconducting, in disagreement with recent reports. The sign and magnitude of the volumes of transition reflect the sign and magnitude of the discontinuities in electrical conductivity across the two first order phase transitions. A high partial pressure of oxygen was demonstrated to stabilise BiFeO{sub 3} towards peritectic decomposition. Finally, the origins of the commonly observed decomposition of BiFeO{sub 3} at high temperatures are discussed. - Graphical abstract: The structural phase transitions of multiferroic BiFeO{sub 3} are shown to first order, with discontinuous volume and electrical conductivity. Semiconductivity was found for all three polymorphs of BiFeO{sub 3}.

36 MATERIALS SCIENCE↗

Influence of Oxidation Treatments and Surface Finishing on the Electrochemical Behavior of Ni-20Cr HVOF Coatings

The low-temperature electrochemical behavior of HVOF Ni-20Cr coatings was assessed. The coatings were evaluated in different conditions including as-sprayed, as-ground, and heat-treated in air and argon atmospheres. A detailed analysis of the coatings was carried out by means of XRD, SEM, and EPMA, prior and after the corrosion test. The corrosion rate was analyzed in a NaCl solution saturated with CO{sub 2}. Results demonstrate that the use of a low-oxygen partial pressure favors the formation of a Cr{sub 2}O{sub 3} layer on the surface of the coatings. According to the electrochemical results, the lower corrosion rates were obtained for the heat-treated coatings irrespective of the surface finishing, being the ground and argon heat-treated condition that shows the best corrosion performance. This behavior is due to the synergistic effect of the low-pressure heat treatment and the grinding processes. The grinding promotes a more homogeneous reaction area without surface heterogeneities such as voids, and the pre-oxidation treatment decreases the porosity content of the coating and also allows the growing of a Cr-rich oxide scale which acts as a barrier against the ions of the aqueous solution.

36 MATERIALS SCIENCE↗

Synthesis of oxidation resistant lead nanoparticle films by modified pulsed laser ablation

Thin layers of lead nanoparticles have been produced by a modified pulsed laser ablation (PLA) process in which smaller nanoparticles were swept out of the ablation chamber by a stream of flowing Ar. Large ({mu}m-sized) particles, which are usually deposited during the standard PLA process, were successfully eliminated from the deposit. The nanoparticles deposited on room temperature substrates were well distributed, and the most probable particle diameter was in the order of 30 nm. Since lead is highly reactive, the nanoparticles formed in Ar were quickly oxidized upon exposure to air. A small partial pressure of H{sub 2}S gas was subsequently added to the effluent, downstream from the ablation chamber, and this resulted in the formation of nanoparticle deposits that were surprisingly oxidation resistant. The properties of the nanoparticle films (as determined by transmission electron microscopy, scanning electron microscopy, x-ray diffraction, x-ray photoelectron spectroscopy, and conductivity measurements) are reported, and the mechanism of the oxidation retardation process is discussed.

36 MATERIALS SCIENCE↗

Electrical conduction mechanism in La{sub 3}Ta{sub 0.5}Ga{sub 5.3}Al{sub 0.2}O{sub 14} single crystals

The electrical conduction mechanism in La{sub 3}Ta{sub 0.5}Ga{sub 5.3}Al{sub 0.2}O{sub 14} (LTGA) single crystals was studied by nonstoichiometric defect formation during crystal growth. Since stoichiometric LTGA is not congruent, the single crystal grown from the stoichiometric melt was Ta-poor and Al-rich, where Al atoms were substituted not only in Ga sites but also in Ta sites. The population of the substitutional Al in Ta sites increased with increasing oxygen partial pressure during growth (growth-pO{sub 2}) in the range from 0.01 to 1 atm. Below 600 °C, substitutional Al atoms in Ta sites were ionized to yield holes, and thus the electrical conductivity of the LTGA crystal depended on temperature and the growth-pO{sub 2}. The dependence of the electrical conductivity on the growth-pO{sub 2} decreased as temperature increased. The temperature rise increases ionic conductivity, for which the dominant carriers are oxygen defects formed by the anion Frenkel reaction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

THE OXYGEN PERMEATION PROPERTIES OF NANO CRYSTALLINE CEO2 THIN FILMS

The measurement of oxygen flux across nanocrystalline CeO{sub 2} cerium oxide thin films at intermediate temperature (650 to 800 C) is presented. Porous ceria support substrates were fabricated by sintering with carbon additions. The final dense film was deposited from an optimized sol-gel solution resulting in a mean grain size of 50 nm which displayed oxygen flux values of up to 0.014 {micro}mol/cm{sup 2}s over the oxygen partial pressure range from air to helium gas used in the measurement at 800 C. The oxygen flux characteristics confirm mixed ionic and electronic conductivity in nanocrystalline ceria films and demonstrate the role of size dependent materials properties as a design parameter in functional membranes for oxygen separation.

36 MATERIALS SCIENCE↗