Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NIR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Near-infrared downconversion luminescence of SrMoO{sub 4}:Tm{sup 3+},Yb{sup 3+} phosphors

Graphical abstract: The calculated band structure of SrMoO{sub 4} and the visible and infrared emission spectra of SrMoO{sub 4}:1%Tm{sup 3+},10%Yb{sup 3+} phosphors under 283 nm excitation.▪ - Highlights: • Near-infrared downconversion luminescence of SrMoO{sub 4}:Tm{sup 3+},Yb{sup 3+} phosphors were systematically investigated. • The electronic structure of SrMoO{sub 4} was estimated by density functional theory. • The quenching concentration of Yb{sup 3+} ions approaches 10 mol%. • The energy transfer mechanism was discussed in detail. - Abstract: Tm{sup 3+} and Yb{sup 3+} codoped SrMoO{sub 4} phosphors were synthesized by the high-temperature solid-state reaction method. The structure, ultraviolet-visible diffuse reflectance spectra, photoluminescence, decay properties and theoretical energy transfer efficiency of the phosphors were investigated in detail. The electronic structure and band gap of SrMoO{sub 4} were estimated by density functional theory (DFT) calculation. The XRD results show that all the prepared phosphors can be readily indexed to scheelite-type structure. The strong visible emission around 473 nm from Tm{sup 3+} ({sup 1}G{sub 4} → {sup 3}H{sub 6}) and near-infrared (NIR) emission around 998 nm from Yb{sup 3+} ({sup 2}F{sub 5/2} → {sup 2}F{sub 7/2}) of the SrMoO{sub 4}:Tm{sup 3+},Yb{sup 3+} phosphors were observed under 283 nm excitation. The dependence of the visible and NIR emissions on Yb{sup 3+} concentration have also been investigated. The quenching concentration of Yb{sup 3+} ions approaches 10 mol%. In addition, the energy transfer processes and possible transfer routes were proposed.

36 MATERIALS SCIENCE↗

Preservation of higher Fe[II] content in borosilicate glass by microwave irradiation in air

Highlights: • Higher Fe[II] absorption within 1000–1200 nm in UV-vis-NIR spectra in microwave (MW) melted glass. • Spectrophotometric methods confirm higher Fe-redox ratio in MW melted glass. • Thermogravimetric analysis (TGA) recorded more weight gain signifying higher stabilisation of Fe[II] in MW melted glass. • Fe 2p{sub 3/2} peak in XPS demonstrates presence of higher FeO concentration in MW glass. • Slow conversation of Fe[II] to Fe[III] in MW heating influencing retention of higher Fe[II]. - Abstract: Existence of high Fe[II] content in glass is a perquisite for achieving high heat absorption property in glass. Present study investigates the capability of microwave (MW) irradiation in retention of higher Fe[II] in glass eliminating the stringent reducing atmosphere requirements in conventional heating. Stabilisation of higher Fe[II] in glass under influence of MW irradiation has been demonstrated, measuring absorbance at >1000 nm in UV–vis-NIR spectra, maintaining identical conditions in MW and in conventional heating. Spectrophotometric methods developing color complex of Fe{sup 2+} with ferrozine and 1, 10 ortho-phenanthroline are used to confirm higher content of Fe[II]. Further, more weight gain in thermo gravimetric analysis, higher isomer shift (>0.89 mm/s) with more relative absorption (% area) for Fe[II] in Mössbauer spectroscopy, and shifting of Fe 2p{sub 3/2} peak in X-ray photoelectron spectroscopy towards lower binding energy further confirm retention of higher FeO under MW irradiation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photostable and efficient upconverting nanocrystal-based chemical sensors

Chemical sensing in living systems demands optical sensors that are bright, stable, and sensitive to the rapid dynamics of chemical signaling. Lanthanide-doped upconverting nanoparticles (UCNPs) efficiently convert near infrared (NIR) light to higher energy emission and allow biological systems to be imaged with no measurable background or photobleaching, and with reduced scatter for subsurface experiments. Despite their advantages as imaging probes, UCNPs have little innate chemical sensing ability and require pairing with organic fluorophores to act as biosensors, although the design of stable UCNP-fluorophore hybrids with efficient upconverted energy transfer (UET) has remained a challenge. Here, we report Yb 3+ - and Er 3+ -doped UCNP-fluorophore conjugates with UET efficiencies up to 88%, and photostabilities 100-fold greater by UET excitation than those of the free fluorophores under direct excitation. Despite adding distance between Er 3+ donors and organic acceptors, thin inert shells significantly enhance overall emission without compromising UET efficiency. This can be explained by the large increase in quantum yield of Er 3+ donors at the core/shell interface and the large number of fluorophore acceptors at the surface. Sensors excited by UET show increases in photostability well beyond those reported for other methods for increasing the longevity of organic fluorophores, and those covalently attached to UCNP surface polymers show greater chemical stability than those directly coordinated to the nanocrystal surface. Furthermore by conjugating other fluorescent chemosensors to UCNPs, these hybrids may be extended to a series of NIR-responsive biosensors for quantifying the dynamic chemical populations critical for cell signaling.

36 MATERIALS SCIENCE↗

Ab initio evaluation of the electronic and optical properties of V B C B defect in wurtzite boron nitride as promising single-photon emitter

Single-photon emitters (SPEs) in the near-infrared (NIR) range with sharp and intense zero-phonon lines (ZPLs) of emission are critical for quantum communications. Certain local defects in wide-bandgap semiconductors create isolated occupied and unoccupied states within the bandgap of the host semiconductor and thus exhibit sharp ZPLs of emission. We designed and studied a defect in the wurtzite boron nitride as a potential SPE. It consists of a boron vacancy and a carbon atom substituting another boron atom (V B C B defect). The density of states is obtained within the GW method to identify favorable local defect states that may dominate optical transitions. The dielectric function and oscillator strength of the V B C B defect are obtained using the Bethe-Salpeter equation method to identify the optical excitations of the V B C B defect, from which we conclude that the defect could be a source of NIR emission with a narrow bright ZPL peak, thus an efficient SPE.

36 MATERIALS SCIENCE↗

Installation of a reactive site for covalent wiring onto an intrinsically conductive poly(ionic liquid)

Post-polymerization radical bromination of a nanostructured poly(ionic liquid) that selectively introduces a reactive bromo-group onto the polyalkylthiophene backbone is described. Raman and FTIR spectroscopy proves that the bromine is successfully introduced at the 3-methyl position of the thiophene and that the molecular structure of the polymer remains largely intact with only minimal chain scission detected. FT-IR and Vis-NIR spectroscopy indicates that incorporation of the bromine induces twisting (loss of co-planarity) of the polythiophene backbone. WAXS confirms retention of an ordered lamellar structure with minor lattice spacing contraction. Cyclic voltammetry confirms spectroscopic findings that the bromination reaction yields a stable p-doped polymer. The installed bromine is susceptible to nucleophilic displacement permitting the covalent attachment of other functional molecules, such as a dialkylphosphonate. Elemental analysis of such a transformation established that 100% functionalization can be achieved. These results collectively demonstrate that post-modification of a pconjugated polymer can be used to both tune electronic and photonic properties, as well as install a chemoselective attachment point for the covalent wiring of other molecules.

Brombosz, Scott M.↗

Quantifying the influences of spectral resolution on uncertainty in leaf trait estimates through a Bayesian approach to RTM inversion

The remote monitoring of plant canopies is critically needed for understanding of terrestrial ecosystem mechanics and biodiversity as well as capturing the short- to long-term responses of vegetation to disturbance and climate change. A variety of orbital, sub-orbital, and field instruments have been used to retrieve optical spectral signals and to study different vegetation properties such as plant biochemistry, nutrient cycling, physiology, water status, and stress. Radiative transfer models (RTMs) provide a mechanistic link between vegetation properties and observed spectral features, and RTM spectral inversion is a useful framework for estimating these properties from spectral data. However, existing approaches to RTM spectral inversion are typically limited by the inability to characterize uncertainty in parameter estimates. Here, we introduce a Bayesian algorithm for the spectral inversion of the PROSPECT 5 leaf RTM that is distinct from past approaches in two important ways: First, the algorithm only uses reflectance and does not require transmittance observations, which have been plagued by a variety of measurement and equipment challenges. Second, the output is not a point estimate for each parameter but rather the joint probability distribution that includes estimates of parameter uncertainties and covariance structure. We validated our inversion approach using a database of leaf spectra together with measurements of equivalent water thickness (EWT) and leaf dry mass per unit area (LMA). The parameters estimated by our inversion were able to accurately reproduce the observed reflectance (RMSE VIS = 0.0063, RMSE NIR-SWIR = 0.0098) and transmittance (RMSE VIS = 0.0404, RMSE NIR-SWIR = 0.0551) for both broadleaved and conifer species. Inversion estimates of EWT and LMA for broadleaved species agreed well with direct measurements (CV EWT = 18.8%, CV LMA = 24.5%), while estimates for conifer species were less accurate (CV EWT = 53.2%, CV LMA = 63.3%). To examine the influence of spectral resolution on parameter uncertainty, we simulated leaf reflectance as observed by ten common remote sensing platforms with varying spectral configurations and performed a Bayesian inversion on the resulting spectra. We found that full-range hyperspectral platforms were able to retrieve all parameters accurately and precisely, while the parameter estimates of multispectral platforms were much less precise and prone to bias at high and low values. We also observed that variations in the width and location of spectral bands influenced the shape of the covariance structure of parameter estimates. Lastly, our Bayesian spectral inversion provides a powerful and versatile framework for future RTM development and single- and multi-instrumental remote sensing of vegetation.

54 ENVIRONMENTAL SCIENCES↗

Effect of tellurium doping on the structural, optical, and electrical properties of CdO

Te-doped CdO thin-films (1%, 3%, and 5%) have been prepared by a vacuum evaporation method on glass and silicon-wafer substrates. The prepared films were characterised by X-ray fluorescence, X-ray diffraction, UV-VIS-NIR absorption spectroscopy, and dc-electrical measurements. Experimental data indicate that Te ions doping slightly stresses the host CdO crystalline structure and changes the optical and electrical properties. The bandgap of the host CdO was suddenly narrowed by about 23% due to a little (1%) doping with Te ions. This bandgap shrinkage was explained by effects of trap levels overlapping with conduction band. The electrical behaviours of the Te-doped CdO films show that they are degenerate semiconductors with a bandgap of 1.7-2.2 eV. The 1% Te-doped CdO film shows increase its mobility by about 5 times, conductivity by {proportional_to}140 times, and carrier concentration by {proportional_to}27 times, relative to undoped CdO film. From transparent-conducting-oxide point of view, Te is sufficiently effective for CdO doping. Finally, the absorption in the NIR spectral region was studied in the framework of the classical Drude theory. (author)

36 MATERIALS SCIENCE↗

Chemometrics and visible diffuse reflectance spectroscopy to classify plutonium dioxide

Diffuse reflectance (DR) spectra in the Vis-NIR (∼380–1050 nm) region were acquired for a series of PuO 2 samples with a spot size of about 10 × 10 μm. Two batches of six PuO 2 samples, synthesized approximately 7.5 months apart, were prepared using both Pu(III) and Pu(IV) oxalate precursors at three distinct calcination temperatures (450, 650, and 950 °C). This yielded a total of 12 PuO 2 samples and 433 DR spectra. The DR spectrum of PuO 2 contained numerous peaks in the visible region, and characteristic features were identified with respect to calcination temperature and chemistry. A distinct peak multiplet near 615 nm was observed for samples prepared at low calcination temperatures, and a peak near 660 nm was observed for higher calcination temperatures. A multivariate classification strategy based on principal component analysis (PCA) was developed to distinguish PuO 2 calcination temperatures of 450, 650, and 950 °C with 100 % accuracy. Classification results also indicate the potential to distinguish chemical processing history (i.e., Pu(III) or Pu(IV)) based on the spectra with 72 % accuracy based on k-nearest neighbors applied to the PCA scores. Partial least squares discriminant analysis was used to identify variation among batches with 88 % accuracy and found that peaks near 669, 681, 811, and 970 nm were the most useful for predicting the batch identity. Here, this work demonstrates how micro-diffuse reflectance spectroscopy and chemometrics can be used to classify PuO 2 processing history based on Vis-NIR spectral features. Combining the chemometric approach with mapping sequences could provide a rapid, nondestructive approach to classify Pu oxide materials for environmental, forensics, and nonproliferation applications.

Actinide↗

p -Azaquinodimethane: A Versatile Quinoidal Moiety for Functional Materials Discovery

The past 50 years of discovery in organic electronics have been driven in large part by the donor–acceptor design principle, wherein electron-rich and electron-poor units are assembled in conjugation with each other to produce small band gap materials. While the utility of this design strategy is undoubtable, it has been largely exhausted as a frontier of new avenues to produce and tune novel functional materials to meet the needs of the ever-increasing world of organic electronics applications. Its sister strategy of joining quinoidal and aromatic groups in conjugation has, by comparison, received much less attention, to a great extent due to the categorically poor stability of quinoidal conjugated motifs. In 2017 though, the p-azaquinodimethane (AQM) motif was first unveiled, which showed a remarkable level of stability despite being a close structural analogue to p-quinodimethane, a notably reactive compound. In contrast, dialkoxy AQM small molecules and polymers are stable even under harsh conditions and could thus be incorporated into conjugated polymers. When polymerized with aromatic subunits, these AQM-based polymers show notably reduced band gaps that follow reversed structure–property trends to some of their donor–acceptor polymer counterparts and yield organic field-effect transistor (OFET) hole mobilities above 5 cm 2 V –1 s –1 . Additionally, in an ongoing study, these AQM-based compounds are also showing promise as singlet fission (SF) active materials due to their mild diradicaloid character. An expanded world of AQMs was accessed through their ditriflate derivatives, which were first used to produce ionic AQMs (iAQMs) sporting two directly attached cationic groups that significantly affect the AQM motif’s electronics, producing strongly electron-withdrawing quinoidal building blocks. Conjugated polyelectrolytes (CPEs) created with these iAQM building blocks exhibit optical band gaps stretching into the near-infrared I (NIR-I) region and showed exemplary behavior as photothermal therapy agents. In contrast to these stable AQM examples, the synthetic exploration of AQMs also produced examples of more typical diradicaloid reactivity but in forms that were controllable and produced intriguing and high-value products. With certain substitution patterns, AQMs were found to dimerize to form highly substituted [2.2]paracyclophanes in distinctly more appreciable yields than typical cyclophane formation reactions. Certain AQM ditriflates, when crystallized, undergo light-induced topochemical polymerization to form ultrahigh molecular weight (>10 6 Da) polymers that showed excellent performances as dielectric energy storage materials. These same AQM ditriflates could be used to produce the strongly electron-donating redox-active pentacyclic structure: pyrazino[2,3-b:5,6-b']diindolizine (PDIz). Importantly, the PDIz motif allowed for the synthesis of exceedingly small band gap (0.7 eV) polymers with absorbances reaching all the way into the NIR-II region that were also found to produce strong photothermal effects. Both as stable quinoidal building blocks and through their controllable diradicaloid reactivity, AQMs have already proven to be versatile and effective as functional organic electronics materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dirhodium(II,II) Complexes as Panchromatic Single-Molecule Photocatalysts for Hydrogen Evolution

The growing global energy demand and climate change have prompted a shift from carbon-based fuels to sustainable energy sources. Hydrogen production by harnessing solar energy and using abundant proton sources represents an attractive approach to addressing this crisis. Single-molecule single-chromophore photocatalysts, capable of both absorbing the incident photon and catalyzing the chemical transformation, are able to circumvent energy losses present in multicomponent systems that require a photosensitizer and a catalyst, often employing additional redox relay molecules. Here, the series of complexes derived from cis-[Rh 2 (μ-DPhF) 2 (μ-bncn) 2 ] 2+ (1; DPhF = N,N′-diphenylformamidinate, bncn = benzo[c]cinnoline) discussed in this Account presents robust and air-stable single-molecule photocatalysts with panchromatic absorption from the ultraviolet spectral region to the near-infrared (NIR), with high turnover frequencies of ∼20 to 30 h –1 under red light irradiation. For comparison, other single-molecule hydrogen-evolving photocatalysts reported to date exhibit low photocatalytic efficiency, are not operable in the visible or NIR regions, and are unstable under an ambient atmosphere.

Absorption↗

Quantifying Temperature Dependence of Pu(IV) Absorbance Spectra for Advanced Online Monitoring of Nuclear Processes

This article presents a systematic study of Pu(IV) absorbance spectral features as a function of temperature to develop an understanding of this parameter’s effect on chemometric models that can be used as online monitoring tools to support nuclear processing. The descriptive and predictive models that provide real-time feedback of these processes are usually constructed with data collected in conditions typical of a laboratory environment, which can differ drastically from a processing environment. To assess the impact of temperature on Pu(IV) absorbance spectra, 11 samples of Pu(IV) were synthesized with varying HNO 3 concentrations ranging from 0.6 to 9.5 M and heated between 15 and 45 °C. Ultraviolet (UV)–visible (vis)–near-infrared (NIR) absorption spectra collected at different HNO 3 concentrations and temperatures revealed that features associated with Pu(IV) are sensitive to temperature at all HNO 3 concentrations and that changes in features depend on HNO 3 concentration. The contributions of temperature and HNO 3 concentration to variation in Pu(IV) spectral features were evaluated using the principal component analysis of spectra that were baseline-corrected with an asymmetric least-squares method. Furthermore, predictive modeling for HNO 3 concentration with partial least-squares regression of UV–vis–NIR spectra highlighted the importance of accounting for temperature in the calibration set to optimize model performance. This methodology constitutes a new, systematic approach to account for the effect of temperature on the absorption spectra of metal ions and is useful for process monitoring applications in many industries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Consistency-Enhanced Evolution for Variable Selection Can Identify Key Chemical Information from Spectroscopic Data

In the last few decades, spectroscopic techniques such as near-infrared (NIR) spectroscopy have gained wide applications in several industries, such as the pharmaceutical, agricultural, oil, and gas industries. As a result, various soft sensors have been developed to predict sample properties from spectroscopic readings. Because the spectroscopic readings at different wavelengths, especially at the adjacent wavelengths, are highly correlated, it has been shown that variable selection could significantly improve a soft sensor’s prediction performance while reducing the model complexity. To improve the prediction performance, most variable selection methods focus on identifying the variables (i.e., wavelengths or wavelength segments) that are strongly correlated with the dependent variable. Although many successful applications have been reported, these variable selection methods do have their limitations. Specifically, the selected wavelengths sometimes show little connection to the chemical bounds or functional groups presenting in the sample. In addition, the selected variables can be quite sensitive to the choice of the training samples. In this work, we address these limitations from a different perspective: if a variable selection algorithm can identify the truly relevant input variables, it should consistently identify the same subset of variables regardless of the choice of the training samples. Therefore, we propose a variable selection method that aims to improve the consistency of variable selection resulting from different training samples. Furthermore, the new algorithm is termed consistency-enhanced evolution for variable selection (CEEVS). To demonstrate the performance and robustness of CEEVS, we compare the proposed method with three representative variable selection methods using five published NIR data sets. These case studies clearly demonstrate that by improving the variable selection consistency, we can not only achieve improved prediction performance, but also identify key chemical information from spectroscopic data.

42 ENGINEERING↗

Mechanisms of Plutonium Redox Reactions in Nitric Acid Solutions

Plutonium (Pu) exhibits a complex redox behavior in acidic solutions due to its ability to adapt a wide range of oxidation states typically from +3 to +6 and the tendency for dynamic interconversion between the oxidation states that depends upon electrochemical potential, acid concentration and coordination environments. In particular, the accurate redox speciation of Pu in nitric acid solutions and mapping the interconversion between the various oxidation states mechanistically is challenging due to overlapping chemical and electrochemical reactions leading to significant experimental uncertainties. The last several decades have seen the extensive use of spectroscopic methods to identify and characterize Pu solution species in the various oxidation states. However, dynamic redox mobility of Pu has led to discrepancies among the relevant spectral databases for Pu in nitric acid solutions. This work utilizes a combination of voltammetry and controlled-potential in-situ vis–NIR spectroelectrochemistry to overcome these challenges, and map the interconversion between Pu species in +3, +4, and +6 oxidation states. This allowed elucidation of the mechanisms of the involved redox reactions and an in-depth understanding of the relative stability of the Pu oxidation states through mapping of the Pu redox processes as a function of redox potentials and nitric acid concentrations. The NIR-spectroelectrochemistry studies used to spectroscopically map the redox speciation of Pu as a function of oxidation potentials with varying HNO3 concentrations allows a new perspective into the plutonium redox transformations.

Chatterjee, Sayandev↗

Alkali Counterion-Dependent Crystallization of Uranium(IV)–Chloro Structural Units

The synthesis, structural characterization, and spectroscopic properties of five tetravalent uranium (U) phases including Li 6 [U 4 (μ 3 -O) 2 Cl 18 (H 2 O) 2 ]·10H 2 O (1), [U(H 2 O) 4 Cl 4 ] (2), [U(H 2 O) 4 Cl 4 ]·KCl (3), Rb 2 UCl 6 (4), and Cs 2 UCl 6 (5) are reported. Notably, a change in the U 4+ solid-state structural unit was observed based on the identity of the alkali counterion used in the synthesis. Li 1+ yielded a tetranuclear oxo-bridged cluster, [U 4 (μ 3 -O) 2 Cl 18 (H 2 O) 2 ] 6– , Na 1+ and K 1+ yielded two structurally distinct [U(H 2 O) 4 Cl 4 ] complexes, and Rb 1+ and Cs 1+ resulted in [UCl 6 ] 2– as the dominant phases. The spectroscopic properties of the compounds were analyzed using Raman and UV–vis–NIR absorption spectroscopy. The UV–vis–NIR spectra of compounds 1–5 exhibited transitions consistent with uranium in the +4 oxidation state. Clear differences in the absorption band splitting were observed and are likely attributed to differences in metal ion coordination, crystal field effects, and outer sphere interactions Overall, this work demonstrates the utility of noncovalent interactions in tuning the crystallization of various metal complexes from otherwise identical reaction solutions and provides further evidence that counterions impact the composition and structure of actinide complexes isolated in the solid state. In this way, this work affords important insight into directing and controlling the structure of actinide complexes and clusters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rhenium-Selenido Corroles: Reflections on 5d Metalloporphyrins and Metallocorroles as Triplet Emitters and Photosensitizers

Following the successful synthesis of rhenium-oxido, rhenium-imido, and rhenium-sulfido corroles, a series of para-X-substituted rhenium-selenido triarylcorroles (X = OCH 3 , CH 3 , H, F, CF 3 ) have been prepared in 70–76% yields. A one-pot, two-step procedure was used, analogous to that used for ReS corroles, involving rhenium insertion via high-temperature reaction of Re 2 (CO) 10 and free-base corroles in refluxing decalin, followed by exposure to PCl 3 (which is thought to deoxygenate ReO corroles formed under the reaction) and elemental selenium. An analogous procedure, however, failed to yield rhenium-tellurido corroles, presumably reflecting, according to DFT calculations, the limited stability of these species. Unlike ReO corroles, ReS and ReSe corroles were found not to exhibit phosphorescence in the NIR-I regime (600–1000 nm); nor did they sensitize singlet oxygen formation. In the hope of obtaining a broader perspective of this negative result, we also examined ReN porphyrins and found them not to phosphoresce or to sensitize singlet oxygen formation. These results were explained by DFT and TDDFT calculations in terms of low-energy triplet states, which are not energetic enough to excite molecular oxygen to its lowest singlet state. Whether some of the new Re corroles exhibit phosphorescence in the NIR-II regime remains an interesting question for future investigation.

Aromatic compounds↗

Probing the Dynamics of Rydberg and Valence States of Molecular Nitrogen with Attosecond Transient Absorption Spectroscopy

An attosecond pulse is used to create a wavepacket in molecular nitrogen composed of multiple bound and autoionizing electronic states of Rydberg and valence character between 12 and 16.7 eV. A time-delayed, few-femtosecond, near-infrared (NIR) laser pulse is used to couple individual states in the wavepacket to multiple neighboring states, resulting in time-dependent modification of the absorption spectrum and revealing both individual quantum beats of the wavepacket and the energy shifts of the excited states in the presence of the strong NIR field. The broad bandwidth of the attosecond pulse and high energy resolution of the extreme ultraviolet spectrometer allow the simultaneous observation of time-dependent dynamics for many individual vibrational levels in each electronic state. Quantum beating with periods from 1.3 to 12 fs and transient line shape changes are observed among vibrational levels of a progression of electronically autoionizing Rydberg states leading to the excited A 2 π u N 2 + ion core. Vibrational levels in the valence b 1 π u state exhibit 50 fs oscillation periods, revealing superpositions between individual vibrational levels within this state. Comparisons are made to previous studies of electronic wavepackets in atoms that highlight similarities to atomic behavior yet illustrate unique contributions of the diatomic molecular structure to the wavepacket, including the influence of different electronic potentials and vibrational-level-specific electronic dynamics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoactive Excited States in Explosive Fe(II) Tetrazine Complexes: A Time-Dependent Density Functional Theory Study

Time-dependent density functional theory was used to investigate optical absorption of novel Fe(II) coordination complexes with tetrazine ligands. These octahedral compounds absorb near-infrared (NIR) light and can be applied as secondary explosives with low laser-initiation thresholds compared to pentaerythritol tetranitrate. Here in this paper, numerous ligand architectures are studied to determine relationships between molecular structure and optical absorption in order to tune the low-energy charge transfer (CT) band. Geometrical structures and vertical excitation energies calculated with the TPSSh density functional and 6-311G basis set are in excellent agreement with experiment, with a maximum deviation from UV–vis spectra of 0.10 eV. By altering molecular substituents of the ligand scaffold, the CT band can be tuned between 500 and 1100 nm. Additional conjugation in the ligand scaffold pushes the CT band into the NIR region of the spectrum. Triazolo-tetrazine ligands shift the CT band by approximately 0.70 eV relative to that of Fe(II) coordinated with bipyridine ligands. Oxygenated analogues of several compounds are also studied in order to predict optical response, while improving explosive performance. A natural population analysis suggests that the high nitrogen content of the ligand scaffolds in these energetic compounds lessens their metal-to-ligand charge transfer character compared to that of Fe(II) coordinated with bipyridine ligands. The proposed model quantum chemistry is used to establish structure–property relationships for optical properties in this class of materials in order to make optical initiation with conventional lasers a more feasible approach.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonadiabatic Derivative Couplings through Multiple Franck–Condon Modes Dictate the Energy Gap Law for Near and Short-Wave Infrared Dye Molecules

Near infrared (NIR, 700–1000 nm) and short-wave infrared (SWIR, 1000–2000 nm) dye molecules exhibit significant nonradiative decay rates from the first singlet excited state to the ground state. While these trends can be empirically explained by a simple energy gap law, detailed mechanisms of nearly universal behavior have remained unsettled for many cases. Theoretical and experimental results for two representative NIR/SWIR dye molecules reported here clarify the key mechanism for the observed energy gap law behavior. It is shown that the first derivative nonadiabatic coupling terms serve as major coupling pathways for nonadiabatic decay processes from the first excited singlet state to the ground state for these NIR and SWIR dye molecules and that vibrational modes other than the highest frequency modes also make significant contributions to the rate. Finally, this assessment is corroborated by further theoretical comparison with possible alternative mechanisms of intersystem crossing to triplet states and also by comparison with experimental data for deuterated molecules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗