Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MULTIPLICATION FACTORS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Chest Wall Radiotherapy: Middle Ground for Treatment of Patients With One to Three Positive Lymph Nodes After Mastectomy

Purpose: To evaluate the outcomes for patients with Stage II breast cancer and one to three positive lymph nodes after mastectomy who were treated with observation or adjuvant radiotherapy to the chest wall (CW) with or without the regional lymphatics. Methods and Materials: We retrospectively analyzed 238 patients with Stage II breast cancer (one to three positive lymph nodes) treated with mastectomy at the Massachusetts General Hospital between 1990 and 2004. The estimates of locoregional recurrence (LRR), disease-free survival (DFS), and overall survival were analyzed according to the delivery of radiotherapy and multiple prognostic factors. Results: LRR and DFS were significantly improved by postmastectomy radiotherapy (PMRT), with a 5- and 10-year LRR rate without PMRT of 6% and 11%, respectively and, with PMRT, of 0% at both 5 and 10 years (p = .02). The 5- and 10-year DFS rate without PMRT was 85% and 75%, respectively, and, with PMRT, was 93% at both 5 and 10 years (p = .03). A similar benefit was found for patients treated with RT to the CW alone. The LRR, DFS, and overall survival rate for patients treated to the CW only was 0%, 96%, and 95% at 10 years, respectively. Conclusion: Our data suggest that adjuvant PMRT to the CW alone provides excellent disease control for patients with breast cancer <5 cm with one to three positive lymph nodes.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Outcomes After Accelerated Partial Breast Irradiation in Patients With ASTRO Consensus Statement Cautionary Features

Purpose: To evaluate outcomes among women with American Society for Radiation Oncology (ASTRO) consensus statement cautionary features treated with brachytherapy-based accelerated partial breast irradiation (APBI). Methods and Materials: Between March 2001 and June 2006, 322 consecutive patients were treated with high-dose-rate (HDR) APBI at the University of Wisconsin. A total of 136 patients were identified who met the ASTRO cautionary criteria. Thirty-eight (27.9%) patients possessed multiple cautionary factors. All patients received 32 to 34 Gy in 8 to 10 twice-daily fractions using multicatheter (93.4%) or Mammosite balloon (6.6%) brachytherapy. Results: With a median follow-up of 60 months, there were 5 ipsilateral breast tumor recurrences (IBTR), three local, and two loco-regional. The 5-year actuarial rate of IBTR was 4.8% {+-} 4.1%. The 5-year disease-free survival was 89.6%, with a cause-specific survival and overall survival of 97.6% and 95.3%, respectively. There were no IBTRs among 32 patients with ductal carcinoma in situ (DCIS) vs. 6.1% for patients with invasive carcinoma (p = 0.24). Among 104 patients with Stage I or II invasive carcinoma, the IBTR rate for patients considered cautionary because of age alone was 0% vs. 12.7% in those deemed cautionary due to histopathologic factors (p = 0.018). Conclusions: Overall, we observed few local recurrences among patients with cautionary features. Women with DCIS and patients 50 to 59 years of age with Stage I/II disease who otherwise meet the criteria for suitability appear to be at a low risk of IBTR. Patients with tumor-related cautionary features will benefit from careful patient selection.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Evaluating the effects of heatwave events on hydrological processes in the contiguous United States (2003–2022)

Extreme heat and drought conditions are affecting water availability in many regions worldwide, leading to negative impacts on human societies, agriculture, and ecosystems. However, current research lacks comprehensive spatiotemporal analysis examining the interplay between multiple hydrological factors and heatwave events, especially in the context of climate change. This research broadly pertains to understanding the dynamics of hydrological factors and their potential responses to heatwave during warm seasons across the contiguous United States for the period from 2003 to 2022. Utilizing data from the Global Land Data Assimilation System (GLDAS), we analyzed surface runoff, evapotranspiration (ET), precipitation, Groundwater Storage (GWS), Root Zone Soil Moisture (RZSM), and Total Water Storage (TWS) to discern annual patterns and the impacts of heatwave. Further, the spatial patterns of heatwave highlighted a higher occurrence in the western, central, and northeastern U.S., with longer average durations in the western and south-central regions. These events are predominantly dry, characterized by low Relative Humidity (RH), except in the southeastern U.S., where heatwave coincide with high RH levels. Post-heatwave analysis indicated a reduction in GWS, TWS, RZSM, and ET, alongside an increase in surface runoff, RH, and precipitation. An in-depth examination of rainfall and temperature dynamics during heatwave revealed weak correlations between rainfall and temperature, as well as between rainfall and heatwave duration, highlighting the complex nature of these interactions. The study also found an enhanced probability of rainfall following heatwave, particularly in the eastern regions, drawing attention to the potential for increased flood risks post-heatwave. Our findings contribute to the growing body of knowledge on the impacts of heatwave on hydrological factors, providing valuable insights for climate change adaptation and water resource management strategies.

54 ENVIRONMENTAL SCIENCES↗

Corrosion of Al-Fe self-pierce riveting joints with multiphysics-based modeling and experiments

Self-piercing riveting (SPR) is an extensively used joining technique to assemble dissimilar materials. However, this joining of the dissimilar materials can generate galvanic/crevice corrosion, which can drastically impact the mechanical properties and the service life of the joint. In this study, a multiphysics-based hybrid modeling approach is developed for the galvanic corrosion of the Al-Fe SPR joints, which can consider the corrosion initiation and corrosion evaluation jointly. Experimental studies are first performed to extract information regarding the corrosion initiation sites, corrosion evolution and overall corrosion induced material loss in SPR joints. The initiation information is then passed onto the multiphysics FE model thus making it a hybrid model. This model can help understand the influences of metal microstructure on the corrosion propagation while the morphology changes can also be analyzed. Using the developed hybrid modeling approach, thorough parametric studies can be performed to explore the coupled impacts of multiple corrosion factors on the corrosion behavior of the joints. The developed hybrid model is validated on the prediction of galvanic corrosion for the SPR joints by comparing with experimental observations.

36 MATERIALS SCIENCE↗

Model predictive control of heating, ventilation, and air conditioning (HVAC) systems: A state-of-the-art review

Due to the fast advancement of communication and information technology, intelligent buildings have garnered great interest. These buildings can forecast weather, ambient temperature, and sun irradiation and can modify heating, ventilation, and air conditioning (HVAC) operations appropriately, based on current and previous data. This change is intended to reduce HVAC system energy usage while maintaining an appropriate degree of thermal comfort and indoor air quality. Since its inception, model predictive control (MPC) has been one of the prospective solutions for HVAC management systems to reduce both costs and energy usage. Additionally, MPC is becoming increasingly practical as the processing capacity of building automation systems increases and a large quantity of monitored building data becomes available. MPC also provides the potential to improve the energy efficiency of HVAC systems via its capacity to consider limitations, to predict disruptions, and to factor in multiple competing goals such as interior thermal comfort and building energy consumption. Although substantial research has been conducted on MPC in building HVAC systems, there is a shortage of critical reviews and a lack of a comprehensive framework that formulates and defines the applications. Here, this article provides a comprehensive state-of-the-art overview of MPC in HVAC systems. Detailed discussions of modeling approaches and optimization algorithms are included. Numerous design aspects such as prediction horizon, occupancy behavior, building type, and cost function, that impact MPC performance are discussed in detail. The technical characteristics, advantages, and disadvantages of various types of modeling software are discussed. The primary objective of this work is to highlight critical design characteristics for the MPC control scheme and to give improved suggestions for future research. Moreover, numerous prospective scenarios have been suggested that might provide future research direction.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Modeling the microplastic distribution along the Delaware River Estuary: Accumulation patterns and hydrodynamic influences

Microplastic pollution is an escalating environmental concern, particularly in densely populated estuary regions, where it poses significant threats to aquatic life and human health. The dispersion patterns of microplastic particles along estuaries are influenced and complicated by multiple environmental factors such as river flow, tidal mixing, salt intrusion, and estuarine circulation. This study examines the accumulation and dispersion patterns by modeling three typical classes of microplastics in the Delaware River Estuary: synthetic fibers, sinking plastic films, and rising plastic pellets. Our findings reveal specific areas with high microplastic accumulation for each type. Notably, the upper estuary regions exhibit significant retention of rising microplastics, associated with a region with reduced along-thalweg velocities downstream of Trenton, NJ and upstream of Philadelphia, PA. Conversely, synthetic fibers and sinking plastic films accumulate in the flow convergence zone near the bottom salinity front, typically downstream of Philadelphia. All of the microplastic accumulation hot spot locations are controlled by the balance of river discharge and salinity intrusions. During the dry season, microplastic accumulation hot spots shift upstream in the estuary, whereas in the wet season, the strong river discharge pushes them downstream. Furthermore, on the other hand, tidal mixing, settling, and resuspension processes strongly impact the spreading of microplastics along the river.

Delaware River Estuary↗

Functionalized Fullerenes for Highly Efficient Lithium Ion Storage: Structure-Property-Performance Correlation with Energy Implications

Here, we report that spherical C 60 derivatives with well-defined molecular structures hold great promise to be advanced anode materials for lithium-ion batteries (LIBs). We studied four C 60 molecules with various functional groups, including pristine C 60 , carboxyl C 60 , ester C 60 , and piperazine C 60 . The comparison of these C 60 s elucidated a strong correlation between functional group, overall packing (crystallinity), and the performance of C 60 -based LIBs. Specifically, carboxyl C 60 and neutral ester C 60 showed higher charge capacities than pristine C 60 , whereas positively-charged piperazine C 60 exhibited lower capacity. The highest charge capacity was achieved on the carboxyl C 60 0 (861 mAh g -1 at 100th cycle), which is five times higher than that of pristine C 60 (170 mAh g -1 ), more than double the theoretical capacity of commercial graphite (372 mAh g -1 ), and even higher than the theoretical capacity of graphene (744 mAh g -1 ). Carboxyl C 60 also showed a high capacity at a fast discharge-charge rate (370 mAh g -1 at 5 C). The exceptional performance of carboxyl C 60 can be attributed to multiple key factors. They include the complex formation between lithium ions and oxygen atoms on the carboxyl group, the improved lithium-binding capability of C 60 cage due to electron donating from carboxylate groups, the electrostatic attraction between carboxylate groups and lithium ions, and the large lattice void space and high specific area due to carboxyl functionalization. In conclusion, this study indicates that, while maintaining the basic C 60 electronic properties, functionalization with desired groups can achieve remarkably enhanced capacity and rate performance for lithium storage, thus holding great promise for future LIBs.

25 ENERGY STORAGE↗

Comparison of Integral Parameter Estimated Uncertainties in Fast Neutron Systems with COMMARA-2.1 and COMMARA-2.0 Covariance Data

This paper shows the main differences between the COMMARA-2.0 and COMMARA-2.1 evaluated covariance data in the uncertainty estimation of integral parameters of interest for a large number of typical innovative fast neutron systems. The study provides some guidelines to the nuclear data evaluators on which materials and which reaction types need to be evaluated most accurately to achieve reliable results in computational analyses of similar systems. The assessment of the quality and reliability of the covariance data is outside the scope of the study.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Predicting the counter-intuitive stress relaxation behavior of glass forming materials

The ability to relax a macroscopically applied stress is often associated with molecular mobility, or the possibility for a molecule to move outside the confines of its current position, within the material of which the stress is applied. In this paper, a viscoelastic constitutive analysis is used to investigate the counter-intuitive experimental observation of “mobility decrease with increased deformation through yield” for a glass forming polymer during stress relaxation while under compressive and tensile loading conditions. The behavior of an epoxy thermoset is examined using an extensively validated, thermorheologically simple, material “clock” model, the Simplified Potential Energy Clock (SPEC) model. This methodology allows for a comparison between the linear viscoelastic (LVE) limit and the true non-linear viscoelastic (NLVE) representation and enables exploration of a wide range of conditions that are not practical to investigate experimentally. The model predicts the behavior previously described as “mobility decrease with increased deformation” in the LVE limit and at low strain rates for NLVE. Only when loading rates are sufficient to decrease the material shift factor by multiple orders of magnitude is the anticipated deformation induced mobility or “mobility increase with increased deformation” observed. While the model has not been “trained” for these behaviors, it also predicts that the normalized stress relaxation response is indistinguishable amongst strain levels in the “post-yield” region, as has been experimentally reported. At long time, which has not been examined experimentally, the model predicts that even the normalized relaxation curves that exhibit “mobility increase with increased deformation” “cross back over” and return to the LVE ordering. Finally, these findings demonstrate the ability of rheologically simple models to represent the counter-intuitive experimentally measured material response and present predictions at long time scales that could be tested experimentally.

36 MATERIALS SCIENCE↗

Simulated aging processes of black carbon and its impact during a severe winter haze event in the Beijing-Tianjin- Hebei region

Black carbon (BC) can mitigate or worsen air pollution through perturbing meteorological conditions. BC aging processes are important for the evolution of particle size, concentration, and optical properties of BC that determines its influence on the meteorology. Here we use the online coupled Weather Research and Forecasting-Chemistry (WRF-Chem) model to quantify the role of BC aging processes, including physical processes (PP) and absorption enhancements (AE), in exerting BC-induced meteorological changes and the associated feedback to PM2.5 (particulate matter less than 2.5 µm in diameter) and O3 concentrations during a severe haze event in Beijing-Tianjin-Hebei (BTH) region during 21-27 February 2014. Our results show that, compared to the simulation without the PP treatment, the simulated near-surface BC concentration and BC mass loading in BTH region is lowered by 6.6 % and 12.1 %, respectively, during the haze event with the PP included. PP increases the proportion of large-size BC (particle diameter greater than 0.312 µm) from 28 %-33 % to 59 %-64 % below 1000 m in BTH region. Both PP and AE enhance the “dome effect” of BC. With both PP and AE considered, a reduction in PBL height due to BC-PBL interaction is 116.3 m (20.7 %), compared to 75.7 m (13.5 %) without AE and 66.6 m (11.9 %) without both PP and AE. However, during this haze event, anomalous northeasterly winds are produced by the direct radiative effect of BC, which further affects the mixing and transport of aerosols. When PBL height is decreased (from 10:00 to 21:00), combining all the impacts on multiple meteorological factors, BC effect without PP and AE, without AE, and with PP and AE, respectively, increases surface concentrations of PM2.5 by 8.3 µg m-3 (6.1 % relative to the mean value), 6.1 µg m-3 (4.5 %) and 9.6 µg m-3 (7.0 %) but decreases surface O3 concentrations by 2.8 ppbv (7.4 %), 4.0 ppbv (9.0 %) and 5.0 ppbv (10.8 %) in BTH region averaged over 21-27 February 2014. Our results highlight the importance of the aging processes and absorption enhancements of BC in simulating weather and air quality.

Chen, Donglin↗

Mercury toxicokinetics-dependency on strain and gender

Mercury (Hg) exposure from dental amalgam fillings and thimerosal in vaccines is not a major health hazard, but adverse health effects cannot be ruled out in a small and more susceptible part of the exposed population. Individual differences in toxicokinetics may explain susceptibility to mercury. Inbred, H-2-congenic A.SW and B10.S mice and their F1- and F2-hybrids were given HgCl{sub 2} with 2.0 mg Hg/L drinking water and traces of {sup 203}Hg. Whole-body retention (WBR) was monitored until steady state after 5 weeks, when the organ Hg content was assessed. Despite similar Hg intake, A.SW males attained a 20-30% significantly higher WBR and 2- to 5-fold higher total renal Hg retention/concentration than A.SW females and B10.S mice. A selective renal Hg accumulation but of lower magnitude was seen also in B10.S males compared with females. Differences in WBR and organ Hg accumulation are therefore regulated by non-H-2 genes and gender. Lymph nodes lacked the strain- and gender-dependent Hg accumulation profile of kidney, liver and spleen. After 15 days without Hg A.SW mice showed a 4-fold higher WBR and liver Hg concentration, but 11-fold higher renal Hg concentration, showing the key role for the kidneys in explaining the slower Hg elimination in A.SW mice. The trait causing higher mercury accumulation was not dominantly inherited in the F1 hybrids. F2 mice showed a large inter-individual variation in Hg accumulation, showing that multiple genetic factors influence the Hg toxicokinetics in the mouse. The genetically heterogeneous human population may therefore show a large variation in mercury toxicokinetics.

60 APPLIED LIFE SCIENCES↗

Replicating centromeric chromatin: Spatial and temporal control of CENP-A assembly

The centromere is the fundamental unit for insuring chromosome inheritance. This complex region has a distinct type of chromatin in which histone H3 is replaced by a structurally different homologue identified in humans as CENP-A. In metazoans, specific DNA sequences are neither required nor sufficient for centromere identity. Rather, an epigenetic mark comprised of CENP-A containing chromatin is thought to be the major determinant of centromere identity. In this view, CENP-A deposition and chromatin assembly are fundamental processes for the maintenance of centromeric identity across mitotic and meiotic divisions. Several lines of evidence support CENP-A deposition in metazoans occurring at only one time in the cell cycle. Such cell cycle-dependent loading of CENP-A is found in divergent species from human to fission yeast, albeit with differences in the cell cycle point at which CENP-A is assembled. Cell cycle dependent CENP-A deposition requires multiple assembly factors for its deposition and maintenance. This review discusses the regulation of new CENP-A deposition and its relevance to centromere identity and inheritance.

60 APPLIED LIFE SCIENCES↗

Exploring Chemistry in Microcompartments Using Guided Droplet Collisions in a Branched Quadrupole Trap Coupled to a Single Droplet, Paper Spray Mass Spectrometer

Recent studies suggest that reactions in aqueous microcompartments can occur at significantly different rates than those in the bulk. Most studies have used electrospray to generate a polydisperse source of highly charged microdroplets, leading to multiple confounding factors potentially influencing reaction rates (e.g., evaporation, charge, and size). Thus, the underlying mechanism for the observed enhancement remains unclear. We present a new type of electrodynamic balance - the branched quadrupole trap (BQT) - which can be used to study reactions in microdroplets in a controlled environment. The BQT allows for condensed phase chemical reactions to be initiated by colliding droplets with different reactants and levitating the merged droplet indefinitely. The performance of the BQT is characterized in several ways. Sub-millisecond mixing times as fast as ~400 μs are measured for low velocity (~0.1 m/s) collisions of droplets with <40 μm diameters. The reaction of o-phthalaldehyde (OPA) with alanine in the presence of dithiolthreitol is measured using both fluorescence spectroscopy and single droplet paper spray mass spectrometry. The bimolecular rate constant for reaction of alanine with OPA is found to be 84 ± 10 and 67 ± 6 M -1 s -1 in a 30 μm radius droplet and bulk solution, respectively, which demonstrates that bimolecular reaction rate coefficients can be quantified using merged microdroplets and that merged droplets can be used to study rate enhancements due to compartmentalization. Products of the reaction of OPA with alanine are detected in single droplets using paper spray mass spectrometry. Finally, we demonstrate that single droplets with <100 pg of analyte can easily be studied using single droplet mass spectrometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

La 3+ Networks and Speciation in the Molten State: Impact of Spacer Salt Selection on Structural Heterogeneity

We recently introduced the concept of a “spacer salt” that creates structural heterogeneity and intermediate range order. Put simply, a fully networked salt melt, such as LaCl 3 or UCl 3 , becomes disrupted by the introduction of ions that do not participate in the network. One of the results of this disruption is the experimental observation of two characteristic distances between the multivalent cations: the shorter “in-network” distance and the longer “across-network” distance spaced by the lowvalency salt. The longer characteristic distance, absent if there is no spacer salt, is the culprit for a new first sharp diffraction peak in scattering experiments. Intuitively, it would appear to follow from this analysis that higher concentrations of the lower-valency salt would further separate multivalent cations, resulting in a shift to lower q values of this first sharp diffraction peak. We will show experimentally and computationally that this is not always the case because multiple other factors enter into play.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anthropogenic Contributions to the 2021 Pacific Northwest Heatwave

Abstract Daily maximum temperatures during the 2021 heatwave in the Pacific Northwest United States and Canada shattered century old records. Multiple causal factors, including anthropogenic climate change, contributed to these high temperatures, challenging traditional methods of attributing human influence. We demonstrate that the observed 2021 daily maximum temperatures are far above the bounds of Generalized Extreme Value distributions fitted from historical data. Hence, confidence in Granger causal inference statements about the human influence on this heatwave is low. Alternatively, we present a more conditional hindcast attribution study using two regional models. We performed ensembles of simulations of the heatwave to investigate how the event would have changed if it had occurred without anthropogenic climate change and with future warming. We found that global warming caused a ∼0.8°C–1°C increase in heatwave temperatures. Future warming would lead to a ∼5°C increase in heatwave temperature by the end of the 21st century.

54 ENVIRONMENTAL SCIENCES↗

RIViT-seq enables systematic identification of regulons of transcriptional machineries

Abstract Transcriptional regulation is a critical process to ensure expression of genes necessary for growth and survival in diverse environments. Transcription is mediated by multiple transcription factors including activators, repressors and sigma factors. Accurate computational prediction of the regulon of target genes for transcription factors is difficult and experimental identification is laborious and not scalable. Here, we demonstrate regulon identification by in vitro transcription-sequencing (RIViT-seq) that enables systematic identification of regulons of transcription factors by combining an in vitro transcription assay and RNA-sequencing. Using this technology, target genes of 11 sigma factors were identified in Streptomyces coelicolor A3(2). The RIViT-seq data expands the transcriptional regulatory network in this bacterium, discovering regulatory cascades and crosstalk between sigma factors. Implementation of RIViT-seq with other transcription factors and in other organisms will improve our understanding of transcriptional regulatory networks across biology.

59 BASIC BIOLOGICAL SCIENCES↗

Mapping the global distribution of C 4 vegetation using observations and optimality theory

Plants with the C 4 photosynthesis pathway typically respond to climate change differently from more common C 3 -type plants, due to their distinct anatomical and biochemical characteristics. These different responses are expected to drive changes in global C 4 and C 3 vegetation distributions. However, current C 4 vegetation distribution models may not predict this response as they do not capture multiple interacting factors and often lack observational constraints. Here, we used global observations of plant photosynthetic pathways, satellite remote sensing, and photosynthetic optimality theory to produce an observation-constrained global map of C 4 vegetation. We find that global C 4 vegetation coverage decreased from 17.7% to 17.1% of the land surface during 2001 to 2019. This was the net result of a reduction in C 4 natural grass cover due to elevated CO 2 favoring C 3 -type photosynthesis, and an increase in C 4 crop cover, mainly from corn (maize) expansion. Using an emergent constraint approach, we estimated that C 4 vegetation contributed 19.5% of global photosynthetic carbon assimilation, a value within the range of previous estimates (18–23%) but higher than the ensemble mean of dynamic global vegetation models (14 ± 13%; mean ± one standard deviation). Our study sheds insight on the critical and underappreciated role of C 4 plants in the contemporary global carbon cycle.

54 ENVIRONMENTAL SCIENCES↗