Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MHD Instability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

NONLINEAR DYNAMICS OF MAGNETOHYDRODYNAMIC ROSSBY WAVES AND THE CYCLIC NATURE OF SOLAR MAGNETIC ACTIVITY

The solar dynamo is known to be associated with several periodicities, with the nearly 11/22 yr cycle being the most pronounced one. Even though these quasiperiodic variations of solar activity have been attributed to the underlying dynamo action in the Sun's interior, a fundamental theoretical description of these cycles is still elusive. Here, we present a new possible direction in understanding the Sun's cycles based on resonant nonlinear interactions among magnetohydrodynamic (MHD) Rossby waves. The WKB theory for dispersive waves is applied to magnetohydrodynamic shallow-water equations describing the dynamics of the solar tachocline, and the reduced dynamics of a resonant triad composed of MHD Rossby waves embedded in constant toroidal magnetic field is analyzed. In the conservative case, the wave amplitudes evolve periodically in time, with periods on the order of the dominant solar activity timescale (∼11 yr). In addition, the presence of linear forcings representative of either convection or instabilities of meridionally varying background states appears to be crucial in balancing dissipation and thus sustaining the periodic oscillations of wave amplitudes associated with resonant triad interactions. Examination of the linear theory of MHD Rossby waves embedded in a latitudinally varying mean flow demonstrates that MHD Rossby waves propagate toward the equator in a waveguide from –35° to 35° in latitude, showing a remarkable resemblance to the structure of the butterfly diagram of the solar activity. Therefore, we argue that resonant nonlinear magnetohydrodynamic Rossby wave interactions might significantly contribute to the observed cycles of magnetic solar activity.

79 ASTRONOMY AND ASTROPHYSICS↗

Dynamical evolution of twisted magnetic flux tubes. I - Equilibrium and linear stability

The three-dimensional dynamical evolution of twisted magnetic flux tubes is studied using a time-dependent magnetohydrodynamic (MHD) model. The flux tubes are intended to model solar coronal loops, and include the stabilizing effect of photospheric line tying. The model permits the complete evolution of flux tubes to be followed self-consistently, including the formation, equilibrium, linear instability, and nonlinear behavior. Starting from an initial uniform background magnetic field, a twisted flux tube is created by the application of slow, localized photospheric vortex flows. The flux tube evolves quasi-statically through sequences of equilibria with increasing twist, until it becomes linearly unstable to an ideal MHD kink mode. In this paper, the equilibrium properties and the linear stability behavior are discussed. The application of the method to the uniform-twist, Gold-Hoyle field confirms the previous stability threshold for kink instability and provides estimates of the resulting growth rate.

Mikic, Zoran↗

TURBULENCE AND STEADY FLOWS IN THREE-DIMENSIONAL GLOBAL STRATIFIED MAGNETOHYDRODYNAMIC SIMULATIONS OF ACCRETION DISKS

We present full 2{pi} global three-dimensional stratified magnetohydrodynamic (MHD) simulations of accretion disks. We interpret our results in the context of protoplanetary disks. We investigate the turbulence driven by the magnetorotational instability (MRI) using the PLUTO Godunov code in spherical coordinates with the accurate and robust HLLD Riemann solver. We follow the turbulence for more than 1500 orbits at the innermost radius of the domain to measure the overall strength of turbulent motions and the detailed accretion flow pattern. We find that regions within two scale heights of the midplane have a turbulent Mach number of about 0.1 and a magnetic pressure two to three orders of magnitude less than the gas pressure, while in those outside three scale heights the magnetic pressure equals or exceeds the gas pressure and the turbulence is transonic, leading to large density fluctuations. The strongest large-scale density disturbances are spiral density waves, and the strongest of these waves has m = 5. No clear meridional circulation appears in the calculations because fluctuating radial pressure gradients lead to changes in the orbital frequency, comparable in importance to the stress gradients that drive the meridional flows in viscous models. The net mass flow rate is well reproduced by a viscous model using the mean stress distribution taken from the MHD calculation. The strength of the mean turbulent magnetic field is inversely proportional to the radius, so the fields are approximately force-free on the largest scales. Consequently, the accretion stress falls off as the inverse square of the radius.

79 ASTRONOMY AND ASTROPHYSICS↗

TURBULENCE IN THE OUTER REGIONS OF PROTOPLANETARY DISKS. I. WEAK ACCRETION WITH NO VERTICAL MAGNETIC FLUX

We use local numerical simulations to investigate the strength and nature of magnetohydrodynamic (MHD) turbulence in the outer regions of protoplanetary disks, where ambipolar diffusion is the dominant non-ideal MHD effect. The simulations include vertical stratification and assume zero net vertical magnetic flux. We employ a super time-stepping technique to ameliorate the Courant restriction on the diffusive time step. We find that in idealized stratified simulations, with a spatially constant ambipolar Elsasser number Am, turbulence driven by the magnetorotational instability (MRI) behaves in a similar manner as in prior unstratified calculations. Turbulence dies away for Am {<=} 1, and becomes progressively more vigorous as ambipolar diffusion is decreased. Near-ideal MHD behavior is recovered for Am {>=} 10{sup 3}. In the intermediate regime (10 {<=} Am {<=} 10{sup 3}) ambipolar diffusion leads to substantial increases in both the period of the MRI dynamo cycle and the characteristic scales of magnetic field structures. To quantify the impact of ambipolar physics on disk accretion, we run simulations at 30 AU and 100 AU that include a vertical Am profile based upon far-ultraviolet (FUV) ionized disk models. These models develop a vertically layered structure analogous to the Ohmic dead zone that is present at smaller radii. We find that, although the levels of surface turbulence can be strong (and consistent with constraints on turbulent line widths at these radii), the inferred accretion rates are at least an order of magnitude smaller than those observed in T Tauri stars. This discrepancy is very likely due to the assumption of zero vertical magnetic field in our simulations and suggests that vertical magnetic fields are essential for MRI-driven accretion in the outer regions of protoplanetary disks.

79 ASTRONOMY AND ASTROPHYSICS↗

Magnetized and collimated millimeter scale plasma jets with astrophysical relevance

Magnetized collimated plasma jets are created in the laboratory to extend our understanding of plasma jet acceleration and collimation mechanisms with particular connection to astrophysical jets. In this study, plasma collimated jets are formed from supersonic unmagnetized flows, mimicking a stellar wind, subject to currents and magnetohydrodynamic forces. It is found that an external poloidal magnetic field, like the ones found anchored to accretion disks, is essential to stabilize the jets against current-driven instabilities. The maximum jet length before instabilities develop is proportional to the field strength and the length threshold agrees well with Kruskal-Shafranov theory. The plasma evolution is modeled qualitatively using MHD theory of current-carrying flux tubes showing that jet acceleration and collimation arise as a result of electromagnetic forces.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An adjoint-based method for optimising MHD equilibria against the infinite- n , ideal ballooning mode

We demonstrate a fast adjoint-based method to optimise tokamak and stellarator equilibria against a pressure-driven instability known as the infinite-n ideal ballooning mode. We present three finite-β (the ratio of thermal to magnetic pressure) equilibria: one tokamak equilibrium and two stellarator equilibria that are unstable against the ballooning mode. Using the self-adjoint property of ideal magnetohydrodynamics, we construct a technique to rapidly calculate the change in the eigenvalue, a measure of ideal ballooning instability. Using the SIMSOPT optimisation framework, we then implement our fast adjoint gradient-based optimiser to minimise the eigenvalue and find stable equilibria for each of the three originally unstable equilibria.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Edge-localized mode avoidance and pedestal structure in I-mode plasmas

I-mode is a high-performance tokamak regime characterized by the formation of a temperature pedestal and enhanced energy confinement, without an accompanying density pedestal or drop in particle and impurity transport. I-mode operation appears to have naturally occurring suppression of large Edge-Localized Modes (ELMs) in addition to its highly favorable scalings of pedestal structure and overall performance. Extensive study of the ELMy H-mode has led to the development of the EPED model, which utilizes calculations of coupled peeling-ballooning MHD modes and kinetic-ballooning mode (KBM) stability limits to predict the pedestal structure preceding an ELM crash. We apply similar tools to the structure and ELM stability of I-mode pedestals. Analysis of I-mode discharges prepared with high-resolution pedestal data from the most recent C-Mod campaign reveals favorable pedestal scalings for extrapolation to large machines—pedestal temperature scales strongly with power per particle P{sub net}/n{sup ¯}{sub e}, and likewise pedestal pressure scales as the net heating power (consistent with weak degradation of confinement with heating power). Matched discharges in current, field, and shaping demonstrate the decoupling of energy and particle transport in I-mode, increasing fueling to span nearly a factor of two in density while maintaining matched temperature pedestals with consistent levels of P{sub net}/n{sup ¯}{sub e}. This is consistent with targets for increased performance in I-mode, elevating pedestal β{sub p} and global performance with matched increases in density and heating power. MHD calculations using the ELITE code indicate that I-mode pedestals are strongly stable to edge peeling-ballooning instabilities. Likewise, numerical modeling of the KBM turbulence onset, as well as scalings of the pedestal width with poloidal beta, indicates that I-mode pedestals are not limited by KBM turbulence—both features identified with the trigger for large ELMs, consistent with the observed suppression of large ELMs in I-mode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Axisymmetric simulations of vertical displacement events in tokamaks: A benchmark of M3D-C 1 , NIMROD, and JOREK

A benchmark exercise for the modeling of vertical displacement events (VDEs) is presented and applied to the 3D nonlinear magnetohydrodynamic codes M3D-C 1 , JOREK, and NIMROD. The simulations are based on a vertically unstable NSTX equilibrium enclosed by an axisymmetric resistive wall with a rectangular cross section. A linear dependence of the linear VDE growth rates on the resistivity of the wall is recovered for sufficiently large wall conductivity and small temperatures in the open field line region. We report the benchmark results show good agreement between the VDE growth rates obtained from linear NIMROD and M3D-C 1 simulations and from the linear phase of axisymmetric nonlinear JOREK, NIMROD, and M3D-C 1 simulations. Axisymmetric nonlinear simulations of a full VDE performed with the three codes are compared, and an excellent agreement is found regarding the plasma location and plasma currents, as well as eddy and halo currents in the wall.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical study of coronal plasma jet formation

A new scenario for solar flare eruption in the coronal holes is analyzed by using MHD stability concepts for a spheromak configuration. The stability properties of a spheromak partially embedded into a conducting surface are studied using three dimensional MHD simulations. In agreement with the analytical theory, a large degree of line-tying stabilizes the spheromak's tilt instability, while the elongation has a destabilizing effect. High-resolution nonlinear simulations also demonstrate current sheet formation at the upper surface of the spheromak, where the tilted magnetic field of the spheromak reconnects with the background magnetic field. The calculated stability threshold and the observed magnetic reconnection support a model of coronal jet eruptions where a dome-like magnetic structure grows through flux emergence on the solar surface, tilts, reconnects, and erupts. Countering the effect from elongation, line-tying strongly stabilizes a spheromak growing from a flux-emergence process, suggesting that to accelerate the onset of eruptive coronal jets, there must be magnetic reconnection at the bottom of the spheromak to detach the structure from the solar surface.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

STABILITY OF THE MAGNETOPAUSE OF DISK-ACCRETING ROTATING STARS

We discuss three modes of oscillation of accretion disks around rotating magnetized neutron stars which may explain the separations of the kilohertz quasi-periodic oscillations (QPOs) seen in low-mass X-ray binaries. The existence of these compressible, nonbarotropic magnetohydrodynamic (MHD) modes requires that there be a maximum in the angular velocity {omega}{sub {phi}}(r) of the accreting material larger than the angular velocity of the star {omega}{sub *}, and that the fluid be in approximately circular motion near this maximum rather than moving rapidly toward the star or out of the disk plane into funnel flows. Such a maximum in {omega}{sub {phi}} occurs naturally in disk accretion to a slowly rotating magnetized star due the magnetic braking of the disk rotation by the stellar field. Our MHD simulations show this type of flow and {omega}{sub {phi}}(r) profile. The first mode is a Rossby wave instability (RWI) mode which is radially trapped in the vicinity of the maximum of a key function g(r)F(r) at r{sub R} . The real part of the angular frequency of the mode is {omega} {sub r} = m{omega}{sub {phi}}(r{sub R} ), where m = 1, 2, ... is the azimuthal mode number. We argue that the nonlinear saturation of the RWI occurs when the trapping frequency of fluid particles in the Rossby vortex equals the RWI growth rate. The second mode is a mode driven by the rotating, nonaxisymmetric component of the star's magnetic field. It has an angular frequency equal to the star's angular rotation rate {omega}{sub *}. This mode is strongly excited near the radius of the Lindblad resonance which is slightly outside of r{sub R} . The third mode arises naturally from the interaction of a flow perturbation with the rotating nonaxisymmetric component of the star's magnetic field. It has an angular frequency {omega}{sub *}/2. We suggest that the first mode with m = 1 is associated with the upper QPO frequency, {nu} {sub u}; that the nonlinear interaction of the first and second modes gives the lower QPO frequency, {nu}{sub l} = {nu} {sub u} - {nu}{sub *}; and that the nonlinear interaction of the first and third modes gives the lower QPO frequency {nu}{sub l} = {nu} {sub u} - {nu}{sub *}/2, where {nu}{sub *} = {omega}{sub *}/2{pi}.

99 GENERAL AND MISCELLANEOUS↗

Plasma guns for controlled fusion at megagauss energy-densities

Electron cyclotron current drive (ECCD) at a low power level has been used on Tore Supra to induce local perturbations of the current density profile. Regimes with strong MHD activity have been analysed, and compared with similar stable discharges, in order to investigate the possible causes of their instability and relate the evolution of the discharge to the localization of EC power deposition. Both co- and counter-current drive pulses have been applied to dominantly or fully non-inductive discharges, sustained by a lower hybrid current drive. Detailed reconstructions by current diffusion calculations have been performed and the error bars evaluated. This method has proved valuable for shedding light on the complex interplay between the evolutions of temperature and safety factor profiles in steady-state tokamak plasmas. The crucial role of the dynamic evolution of rational surfaces has been identified. Moreover, we demonstrate that the operational domain in which ECCD can be employed must cope with the overall current profile characteristics, in particular the position where the safety factor has a minimum.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dense Plasma Focus Modeling

Here we report on high-fidelity 2D and 3D numerical magnetohydrodynamic (MHD) simulations using the LA-COMPASS code to study the pinch formation dynamics in a DPF and the associated instabilities and neutron production.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Production of Magnetic Turbulence by Cosmic Rays Drifting Upstream of Supernova Remnant Shocks

I will present results of our recent two- and three-dimensional Particle-In-Cell simulations of magnetic-turbulence production by cosmic-ray ions drifting upstream of supernova remnant shocks. These studies' aim is twofold: test recent predictions of strong amplification in short wavelength, non-resonant wave modes, and study the subsequent evolution of the magnetic turbulence, including its backreaction on cosmic-ray trajectories. We confirm that the drifting cosmic rays give rise to a turbulent magnetic field, but show that an oblique filamentary mode grows more rapidly than the non-resonant parallel modes found in analytical theory. The field perturbations grow more slowly than estimated using a quasi-linear analytical approach for the parallel plane-wave mode, and saturate in amplitude at deltaB/B approximately equal to 1. The backreaction of the magnetic turbulence on the particles leads to an alignment of the bulk-flow velocities of the cosmic rays and the background medium. This is an essential characteristic of cosmic ray-modified shocks: the upstream flow speed is continuously changed by the cosmic rays. The reduction of relative drift between cosmic rays and background medium accounts for the saturation of the instability at only moderate magnetic-field amplitudes. It is possible that the prolonged magnetic field growth observed in recent MHD simulations results from a cosmic-ray current assumed to be constant and thus immune to the backreaction from the turbulent field. We speculate that the parallel plane-wave mode found in analytical treatments very quickly leads co filamentation, which we observe in our PIC modeling and is also apparent in the MHD simulations.

Stroman, Thomas↗

Magneto-hydrodynamically stable axisymmetric mirrors

Making axisymmetric mirrors magnetohydrodynamically (MHD) stable opens up exciting opportunities for using mirror devices as neutron sources, fusion-fission hybrids, and pure-fusion reactors. This is also of interest from a general physics standpoint (as it seemingly contradicts well-established criteria of curvature-driven instabilities). The axial symmetry allows for much simpler and more reliable designs of mirror-based fusion facilities than the well-known quadrupole mirror configurations. In this tutorial, after a summary of classical results, several techniques for achieving MHD stabilization of the axisymmetric mirrors are considered, in particular: (1) employing the favorable field-line curvature in the end tanks; (2) using the line-tying effect; (3) controlling the radial potential distribution; (4) imposing a divertor configuration on the solenoidal magnetic field; and (5) affecting the plasma dynamics by the ponderomotive force. Some illuminative theoretical approaches for understanding axisymmetric mirror stability are described. The applicability of the various stabilization techniques to axisymmetric mirrors as neutron sources, hybrids, and pure-fusion reactors are discussed; and the constraints on the plasma parameters are formulated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Toroidal modeling of thermal particle drift kinetic effects and sub-sonic plasma flow on internal kink mode

The stability of the n = 1 ( n is the toroidal mode number) internal kink mode in a tokamak plasma is numerically investigated, utilizing the full toroidal, ideal magnetohydrodynamic (MHD) code MARS-F [Y. Q. Liu et al. , Phys. Plasmas 7, 3681 (2000)] and the nonperturbative MHD-kinetic hybrid code MARS-K [Y. Liu et al. , Phys. Plasmas 15, 112503 (2008)]. This study focuses on two physics effects: the sheared toroidal flow of plasma and the drift kinetic effects from thermal particles (ions and electrons) on the internal kink instability. Within the subsonic flow assumption, the flow and flow shear effects on the internal kink are generally weak, but the kinetic effects can be strong. A significant reduction in the mode growth rate is predicted by the nonperturbative MHD-kinetic hybrid computations, when the precessional drift resonance contributions from both particle species are included and when the mode is not too strongly unstable according to the fluid theory. The stabilization/destabilization of sheared toroidal flow depends on the radial location of the local flow shear. Strong destabilization (stabilization) occurs when a negative (positive) flow shear is located near the q = 1 rational surface.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

SHEAR PHOTOSPHERIC FORCING AND THE ORIGIN OF TURBULENCE IN CORONAL LOOPS

We present a series of numerical simulations aimed at understanding the nature and origin of turbulence in coronal loops in the framework of the Parker model for coronal heating. A coronal loop is studied via reduced magnetohydrodynamic (MHD) simulations in Cartesian geometry. A uniform and strong magnetic field threads the volume between the two photospheric planes, where a velocity field in the form of a one-dimensional shear flow pattern is present. Initially, the magnetic field that develops in the coronal loop is a simple map of the photospheric velocity field. This initial configuration is unstable to a multiple tearing instability that develops islands with X and O points in the plane orthogonal to the axial field. Once the nonlinear stage sets in the system evolution is characterized by a regime of MHD turbulence dominated by magnetic energy. A well-developed power law in energy spectra is observed and the magnetic field never returns to the simple initial state mapping the photospheric flow. The formation of X and O points in the planes orthogonal to the axial field allows the continued and repeated formation and dissipation of small-scale current sheets where the plasma is heated. We conclude that the observed turbulent dynamics are not induced by the complexity of the pattern that the magnetic field-line footpoints follow but they rather stem from the inherent nonlinear nature of the system.

79 ASTRONOMY AND ASTROPHYSICS↗

Magnetized ICF implosions: Ignition at low laser energy using designs with more ablator mass remaining

This paper is the first work to redesign a spherical ICF implosion to best utilize the benefits of applying an external magnetic field. The sub-ignition experiment N170601 is taken as the baseline design, which used 1.57 MJ of laser energy. The optimum magnetized design benefits from increasing the shell thickness by 14 μ m and decreasing the ice thickness by 18 μ m, resulting in a neutron yield of 8.9 × 10 17 . This is 34 × greater than the unmagnetized simulation of the same design, and 18.5 × the greatest unmagnetized simulation across all designs simulated. The resultant implosion velocity for the magnetized design is lower, which would also reduce ablation front instability growth. This design was found by using a simplified 1D magnetization model and then validated against full 2D extended-MHD capsule simulations with radiation asymmetries applied to correct the shape.

Walsh, Christopher A. [Lawrence Livermore National↗

ANGULAR MOMENTUM TRANSPORT BY ACOUSTIC MODES GENERATED IN THE BOUNDARY LAYER. II. MAGNETOHYDRODYNAMIC SIMULATIONS

We perform global unstratified three-dimensional magnetohydrodynamic simulations of an astrophysical boundary layer (BL)-an interface region between an accretion disk and a weakly magnetized accreting object such as a white dwarf-with the goal of understanding the effects of magnetic field on the BL. We use cylindrical coordinates with an isothermal equation of state and investigate a number of initial field geometries including toroidal, vertical, and vertical with zero net flux. Our initial setup consists of a Keplerian disk attached to a non-rotating star. In a previous work, we found that in hydrodynamical simulations, sound waves excited by shear in the BL were able to efficiently transport angular momentum and drive mass accretion onto the star. Here we confirm that in MHD simulations, waves serve as an efficient means of angular momentum transport in the vicinity of the BL, despite the magnetorotational instability (MRI) operating in the disk. In particular, the angular momentum current due to waves is at times larger than the angular momentum current due to MRI. Our results suggest that angular momentum transport in the BL and its vicinity is a global phenomenon occurring through dissipation of waves and shocks. This point of view is quite different from the standard picture of transport by a local anomalous turbulent viscosity. In addition to angular momentum transport, we also study magnetic field amplification within the BL. We find that the field is indeed amplified in the BL, but only by a factor of a few, and remains subthermal.

79 ASTRONOMY AND ASTROPHYSICS↗