Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGMA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Very high potassium (VHK) basalt - Complications in mare basalt petrogenesis

The first comprehensive report on the petrology and geochemistry of Apollo 14 VHK (Very High Potassium) basalts and their implications for lunar evolution is presented. The reported data are most consistent with the hypothesis that VHK basalts formed through the partial assimilation of granite by a normal low-Ti, high-Al mare basalt magma. Assimilation was preceded by the diffusion-controlled exchange of alkalis and Ba between basalt magma and the low-temperature melt fraction of the granite. Hypotheses involving volatile/nonvolatile fractionations or long-term enrichment of the source regions in K are inconsistent with the suprachondritic Ba/La ratios and low initial Sr-87/Sr-86 ratios of VHK basalt. An important implication of this conclusion is that granite should be a significant component of the lunar crust at the Apollo 14 site.

Shervais, J. W.↗

Pristine lunar glasses - Criteria, data, and implications

The examination of glasses from all of the Apollo landing sites has led to the identification of 25 groups of pristine glass. The nickel found in these glasses is shown to be indigenous, not meteoritic contamination, and to be correlated with Mg. Chemical data indicate that these glasses are more suitable for primary magma than most crystalline mare basalts. In addition, these pristine glasses support the view that assimilative processes involving two cumulative systems in the differentiated mantle operated during mare petrogenesis. Two linear arrays found among the chemistries of the glasses attest to the existence of these interactions. Data suggest that these cumulate components in the mantle continue for 1000 km (laterally) and therefore are likely to be products of a magma ocean that existed early in lunar history.

Delano, J. W.↗

Abundances of cobalt, nickel, and volatiles in the silicate portion of the moon

The trace abundances of Ni have been determined in 20 high-Mg magmas produced by partial melting of the lunar mantle. Associated with the eruption of the high-Mg magmas was the release of indigenous volatile elements. Data suggest that these volatiles were derived from primordial blocks of debris from the outer solar system that became entrained in the circumterrestrial accretion disk. The survival of these reservoirs within the lunar interior places constraints on the moon's thermal history.

Delano, John W.↗

Petrology of gabbroic rocks from the Mid-Cayman rise spreading center

Mineral analyses of oxide and silicate phases from a suite (collected with the DSRV Alvin in January 1976 and July 1977) of 48 gabbroic rocks collected from the vicinity of the Mid-Cayman Rise spreading center are reported. Mineral compositions of these anorthosites, leuco-troctolite, leuco-olivine gabbros, olivine gabbros, leuco-gabbros, and gabbros indicate the cumulate rocks have been produced by the crystal fractionation of basaltic liquids. Certain features of these rocks are inconsistent with the occurrence of this fractionation at low pressures (1 atm to 2 kbar). Although the experimental data are not available to conclusively demonstrate that the effects seen were produced at moderate pressures (5-10 kbar), the effects are similar to those predicted thermodynamically and to those observed in limited experimental studies within this pressure range. It is therefore suggested that the most likely scenario for the production of these gabbroic rocks is the moderate-pressure crystallization of basaltic magmas within deep-seated magma chambers underneath this slow-spreading center.

Elthon, Don↗

A vaporization model for iron/silicate fractionation in the Mercury protoplanet

A study has been carried out on the vaporization of a totally molten silicate magma of chondritic composition heated into the range 2500-3500 K. The motivation for this was to determine the changes in the composition of the mantle that would occur in the Mercury protoplanet should that body have been subjected to the high-temperature phase in the evolution of the primitive solar nebula, but the results are of more general interest. An empirical model based on ideal mixing of complex components was used to describe the nonideal magma. It is found that vaporization of about 70-80 percent of the original amount of silicate from a chondritic planet is required to produce an iron-rich body with a mean uncompressed density equal to that deduced for Mercury. At this point the silicate is depleted in the alkalis, FeO, and SiO2, and enriched in CaO, MgO, Al2O3, and TiO2 relative to chondritic material.

Fegley, Bruce, Jr.↗

Volcanology

Studies conducted in the period between 1983 and 1986 on the physical aspects of volcanology, including investigations of physical processes involved in magma transport, are reviewed. Eruptions that occurred during this quadrennium are discussed together with the studies of the methods of volcanic hazard assessment and prediction around active volcanoes. Consideration is given to advances made in the understanding of magma systems, including volatile components, as well as to studies on the atmospheric impact of volcanism. Tectonic controls of volcanism and the volcanic aspects of mineralization are also discussed.

Self, Stephen↗

Ice-covered water volcanism on Ganymede

Eruption of liquid H2O magmas along extensional fractures and graben-bounding normal faults may have played a critical role in the development of Ganymede's grooved terrain. The resurfacing potential of a water magma is dependent on a variety of factors, including the areal extent of the source region, the rate of discharge, the thickness of the flow, and the time that it takes the flow to completely freeze to its base. In this paper the thermal evolution of such a flow is considered in detail. The minimum unfrozen lifetime of a 5-m flow is approximately 12.5 days while a 10-m flow would survive for at least 50 days. Heating resulting from frictional head loss could reasonably extend these lifetimes by 50 percent or more. With a discharge rate of the order of 1-10 cu km/d, an individual volcanic water flow could flood an area of about 10,000 sq km before freezing. As the flow solidifies, its volume will increase, thus lifting and arching its protective ice cover. Extensional fractures may then develop in the ice subparallel to the graben walls. These fractures could result in grooves directly, given a sufficiently thick (1 km) flow, or they may simply act to concentrate various tectonic forces that could initiate groove-producing faults.

Allison, M. Lee↗

Mutual interactions of redox couples via electron exchange in silicate melts - Models for geochemical melt systems

The mutual interactions via electron exchange of redox couples in glass-forming melts were investigated both theoretically and experimentally. A thermodynamic approach for considering the mutual interactions leads to conclusion that the degree of mutual interaction in the melt should be proportional in part to the difference in relative reduction potentials of the interacting redox couples. Experimental studies verify this conclusion for numerous redox couples in several composition/temperature/oxygen fugacity regimes. Geochemical systems simultaneously possess many potentially multivalent elements; the stabilized redox states in the resulting magmas can be explained in part by mutual interactions and by redox buffering through the central Fe(III)- Fe(II) couples in the melts. The significance of these results for basaltic magmas of the earth, moon, and meteorites is addressed.

Schreiber, Henry D.↗

Origin of SNC kaersutitic amphibole: Experimental data

The SNC meteorites, a group of cumulus textured, fine grained diabases, pyroxenites, and dunites, appear to have crystallized at relatively shallow depths on the same SNC parent body. Hydrous minerals generally are not present among the cumulus and intercumulus minerals in these meteorites except for some iddingsite alteration of olivine. The presence of hydrous magmatic amphibole in the SNC melt inclusions indicates that crystallization of the melt inclusions had to take place at significant pressure, probably greater than 1 kb based on previous amphibole stability data. If experimental data for kaersutite amphibole were to be obtained, it should be possible to estimate this pressure more precisely then previously, and to estimate the volatile (H2O) content of the parent magma. At this point, the factors controlling the chemistry and stability of high TiO2, kaersutitic amphiboles are not known. In an attempt to determine the factors which control the stability and chemistry of TiO2-rich amphibole, data was refined and extrapolated from four experimental studies of amphibole-melt equilibria recently completed. At the same time, hypothermal experiments were performed on a composition considered to be an early melt in the Shergotty magma liquid line of descent. The latter experiments were an attempt to reproduce crystallization of the amphibole-bearing melt inclusions.

Rutherford, M. J.↗

Recycling of lower continental crust through foundering of cumulates from contaminated mafic intrusions

A mechanism is presented for recycling of lower continental material back into the mantle. Picritic magmas, possible parental to volumious continental volcanics such as the Karoo and Deccan, became trapped at the Moho, where they interacted with and become contaminated by lower crustal materials. Upon crystallization, the magmas differentiated into lower ultramafic cumulate zones and upper gabbroic-anorthositic zones. The ultramafic cumulates are denser than underlying mantle and sink, carrying lower crustal components as trapped liquid, as xenoliths or rafts, and as constituents of cumulate minerals. This model provides a potentially significant crust-mantle differentiation mechanism, and may also represent a contributing factor in crustal recycling, possibly important in producing some OIB reservoirs.

Arndt, Nicholas T.↗

Rifts of deeply eroded Hawaiian basaltic shields: A structural analog for large Martian volcanoes

Recently derived morphologic evidence suggests that intrusive events have not only influenced the growth of young shield volcanoes on Mars but also the distribution of volatiles surrounding these volcanoes: in addition to rift zones and flank eruptions on Arsia Mons and Pavonis Mons, melt water channels were identified to the northwest of Hecates Tholus, to the south of Hadriaca Patera, and to the SE of Olympus Mons. Melt water release could be the surface expression of tectonic deformation of the region or, potentially, intrusive events associated with dike emplacement from each of these volcanoes. In this study the structural properties of Hawaiian shield volcanoes were studied where subaerial erosion has removed a sufficient amount of the surface to enable a direct investigation of the internal structure of the volcanoes. The field investigation of dike morphology and magma flow characteristics for several volcanoes in Hawaii is reported. A comprehensive investigation was made of the Koolau dike complex that passes through the summit caldera. A study of two other dissected Hawaiian volcanoes, namely Waianae and East Molokai, was commenced. The goal is not only to understand the emplacement process and magma flow within these terrestrial dikes, but also to explore the possible role that intrusive events may have played in volcano growth and the distribution of melt water release on Mars.

Knight, Michael D.↗

Mineral compositions of plutonic rocks from the Lewis Hills massif, Bay of Islands ophiolite

Mineral compositions of residual and cumulate rocks from the Lewis Hills massif of the Bay of Islands ophiolite complex are reported and interpreted in the context of magnetic processes involved in the geochemical evolution of spatially associated diabase dikes. The mineral compositions reflect greater degrees of partial melting than most abyssal peridotites do and appear to represent the most depleted end of abyssal peridotite compositions. Subsolidus equilibration between Cr-Al spinal and olivine generally has occurred at temperatures of 700 to 900 C. The spinel variations agree with the overall fractionation of basaltic magmas producing spinels with progressively lower Cr numbers. The compositions of clinopyroxenes suggest that the fractionation of two different magma series produced the various cumulate rocks.

Smith, Susan E.↗

Phase relations of a high-Mg basalt from the Aleutian Island arc - Implications for primary island arc basalts and high-Al basalts

An experimental investigation of a primitive high-Mg basalt, MK-15, collected from lava flows of the Unalaska Island in the Aleutian Island arc has been conducted in order to study primary and parental island arc basalts and the development of island arc magmas. The results suggest a model in which high-Al basalts are generated by moderate amounts of crystal fractionation from more primitive (high Mg/Mg + Fe, lower Al2O3) basaltic magmas near the arc crust-mantle boundary. Somewhere between 20-30 depth, significant amounts of clinopyroxene and olivine, with lesser amounts of spinel and possibly amphibole, fractionate, forming layer of olivine-clinopyroxenite at the base of the arc crust.

Gust, D. A.↗

Igneous proceses and closed system evolution of the Tharsis region of Mars

A quantitative petrologic model for the evolution of the Tharsis region on Mars is presented, which is consistent with global gravity and topography data. It is demonstrated that it is possible to form and support the topographic relief of the Tharsis plateau by a closed-system mass-conservative nearly isostatic process involving generation of magmas from a mantle source region. Extrusion and/or intrusion (or underplating) of such magmas allows low-pressure solidification, with a consequent increase in volume relative to that which would be possible in the high-pressure source region, leading to elevated topology. The distribution of densities with depth obtained by the model is quantitatively consistent with the isostatic models of Sleep and Phillips (1979, 1985).

Finnerty, A. A.↗

Noble metals in mid-ocean ridge volcanism: A significant fractionation of gold with respect to platinum group metals

Hydrothermal precipitates, black smoker particulate, and massive sulphide dredge samples from the Explorer Ridge on the Juan de Fuca Plate and the TAG hydrothermal area on the Mid-Atlantic Ridge were analyzed for selected noble metals including Au, Ir and Pd by radiochemical neutron activation analysis. The preliminary results indicate that gold contents may reach the ppm range although values in the neighborhood of 100 to 200 ppb are more typical. The platinum group elements (PGE) represented by Ir and Pd are typically less than 0.02 ppb and less than 2 ppb respectively. These abundances represent a significant enrichment of gold relative to the PGE in comparison with average noble metal abundances in mid-ocean ridge basalts (MORB). A partial explanation of this distinctive fractionation can be found in the concepts of sulfur-saturation of basic magma in mid-ocean ridge (MOR) settings, and the origin of MOR hydrothermal fluids. Experimental and petrological data suggest that MORBs are sulfur-saturated at the time of magma generation and that an immiscible sulfide component remains in the mantle residue. Hence, MORBs are noble metal-poor, particularly with respect to PGE. Consequently, black smoker fluids can be expected to reflect the low Ir and Pd contents of the rock column. The average Au content of MORB is 1.3 ppb, and so the rock column is not significantly enriched in Au. The generation of fluids which precipitate solids with 200 ppb Au is apparently dependent on highly efficient fluid chemistry to mobilize Au from the rock column, high Au solubility in seawater hydrothermal fluids and efficient precipitation mechanisms to coprecipitate Au on Fe, Zn and Cu sulfides. Significant differences in these parameters appear to be the ultimate cause of the strong Au-PGE fractionation in the MOR setting. It does not appear from the current data base that MOR hydrothermal fluids are significant contributors to the Ir enrichment seen in Cretaceous-Tertiary boundary sediments.

Crocket, James H.↗

Highland materials at Apollo 17 - Contributions from 72275

A set of Apollo 17 feldspathic highland clasts from polymict breccia 72275 have been studied. The clasts include six granulites and a rare Apollo 17 ferroan anorthosite (FAN). The composition of these clasts is discussed in detail. It is suggested that there are three possibilities regarding the petrogenesis of Apollo 17 FAN: (1) the rocks are products of late-stage crystallization from their parent magma, (2) the rocks solidified with a high amount of trapped liquid relative to FANs from other sites, or (3) the highlands rocks that formed at this site crystallized from a parent magma with a composition distinct from that of other lunar highland sites.

Salpas, Peter A.↗

The age of ferroan anorthosite 60025 - Oldest crust on a young moon?

Sm-Nd isotopic data for mineral separates from the ferroan anorthosite 60025, which define a precise isochron of 4.44 + or - 0.02 Ga age, are discussed. This age is about 110 Myr younger than the formation of the first large solid objects in the solar nebula. If the moon is as old as the oldest meteorite, the relatively young age determined for 60025 implies that the magma ocean did not form synchronously with lunar formation or that the magma ocean required over 100 Myr to reach the stage of ferroan anorthosite crystallization. It is proposed that the accumulated body of radiogenic isotope data for lunar rocks permit the moon to be as young as 4.44-4.51 Ga. This is consistent with the idea that the materials that make up the moon were derived from the earth.

Carlson, Richard W.↗

A three-component model for the bulk composition of the moon

A three-component model for the moon's bulk composition was developed on the basis of the results of Delano (1986) on lunar pristine glasses. This suite of models is based on the following two assumptions: (1) that the early moon differentiated into two primary reservoirs, a FeO-rich magma ocean and an olivine-rich residuum of about Fo(90); and (2) that this magma ocean then differentiated into an olivine-dominated cumulate, about equal to or greater than Fo(80), and a primitive liquid composition. Because serious uncertainties remain concerning the moon's complex differentiation history, this three-component model does not yield a single unique composition for the bulk silicate moon; instead, it yields a range of restricted compositions that are permitted within the conceptual framework of the model.

Jones, John H.↗