SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Presentation to be given at the FY 2020 SDRD Annual Meeting, to be held Sept. 23-24, on WebEx. UAS Sensors in Difficult Locations, STL-016-20, Year 1
In New Mexico, Mexican spotted owls (Strix occidentalis lucida) are typically found in rocky canyons consisting of mixed-conifer forests that have experienced minimal human disturbance. At Los Alamos National Laboratory (LANL), Mexican spotted owls have been found breeding and foraging in habitats consistent with their known biology, but face the impact of human encroachment in the surrounding upland habitat. Little is known about the prey base present within the Laboratory’s vast forests. In anticipation of expanding human development in proximity to known occupied owl habitat, the goal of our study was to evaluate the small mammal prey base available to Mexican spotted owls at the Laboratory and to assess prey availability, diversity and composition. We sampled two study plots within the Laboratory’s forests for small mammals in 2021. Study plots were situated in conifer, deciduous, mixed conifer-deciduous and mixed oak. Our small mammal trapping efforts and SCR modeling revealed site-specific differences in prey base diversity, abundance and density between the unoccupied Pajarito Canyon and nearby occupied Mortandad Canyon site. These results highlight how managing tracts of land for small mammal prey base may overlap with goals set forth by researchers for Mexican spotted owl habitat needs. We recommend further trapping efforts to better understand prey availability in occupied and unoccupied sites at LANL as well as further investigation of prey selection through the dissection of pellets found in the areas surrounding known nesting locations.
This document presents the facility-recommended characterization of the neutron, prompt gamma-ray, and delayed gamma-ray radiation fields for the White Sands Missile Range (WSMR) Fast Burst Reactor, also known as molybdenum-alloy Godiva (Molly-G), at the 6-inch and the 24-inch irradiation locations. The neutron, prompt gamma-ray, and delayed gamma-ray energy spectra, uncertainties, and covariance matrices are presented. Code dependent recommended constants are given to facilitate the conversion of various dosimetry readings into radiation metrics desired by experimenters. Representative pulse operations are presented with conversion examples.
With the growing interest in converting carbon dioxide (CO 2 ) to fuels and products to reduce overall greenhouse gas emissions and extend carbon from biogenic and other sources, the development of carbon capture and utilization (CO2U) technologies and industry is crucial. The Markets, Resources, and Environmental and Energy Justice of CO 2 -to-Fuels Technologies (short title: MarkeRs & EEJ) project supports this goal by assessing the resource and market potential and infrastructure requirements for mid-term (-2030) and long-term (-2050) deployment of CO2U technologies. The overall project analyzes CO2U economic and resource requirements as well as sustainability and environmental and energy justice (EEJ) metrics. This report focuses on short-term (-2030) aspects of the project. It identifies three CO2U locations in the Midwestern United States and quantifies the costs for potential electricity resources and marginal emissions for each site in the near term (e.g., 2030). We focus on four electricity purchase options, including retail rate, physical power purchase agreement (PPA), financial PPA, and real-time pricing (RTP), for each of the three sites and consider potential policies such as production tax credits (PTCs). We also assess time-dependent hourly marginal electricity costs and the marginal emission rates using modeled scenarios from Cambium (Gagnon et al. 2021).The results of the analysis are expected to inform other projects within the U.S. Department of Energy's CO 2 -to-Fuels Consortium, especially the Economics and Sustainability of CO 2 Utilization Technologies with Techno-Economic Analysis and Life Cycle Analysis (TEA/LCA) project, led by Michael Wang of Argonne National Laboratory and Ling Tao of the National Renewable Energy Laboratory. The project results are also expected to inform the investment and technology communities and policymakers at the U.S. Department of Energy, state, and regional levels and guide investment by government and industry in research and development portfolios.
The Source Physics Experiments (SPE) were designed to improve our physics-based understanding of explosion sources for the purposes of nuclear test monitoring. Phase I consisted of 6 chemical explosions in the Climax Stock Granite of the Nevada National Security Site (NNSS), while Phase II consisted of 4 explosions in a contrasting dry alluvium geology (DAG) in Yucca Flat, providing essential data in various media and emplacement conditions to further modeling efforts. For Phase III, the Rock Valley Direct Comparison (RVDC) seeks to directly compare earthquake and explosion source types. An unusually shallow series of events in 1993 along the Rock Valley Fault Zone in the southeastern portion of the NNSS has been targeted for this direct comparison. Depth ranges for the events, previously estimated to be less than 3 km, is achievable by modern drilling techniques and accessibility to the epicentral locations would require minimal improvements to the infrastructure. The events providing this unique opportunity for direct comparison are the focus of this report.
This report presents the results of lattice optimization studies performed to find optimum locations for gadolinia burnable absorber (BA) rods in pressurized water reactor (PWR) lattice fuel designs. Initial excess reactivity suppression allows core designers to further improve operational economics by extending cycle length. Gadolinia BAs are commonly used in boiling water reactor assembly designs for this purpose. In recent years, gadolinia absorbers have been used in PWR designs owing to their longer effectiveness for reactivity suppression compared with common BAs used in PWR assemblies. This report examines the optimum gadolinia pin placement in 17 × 17 PWR lattices at different fuel and gadolinia concentrations for optimized lattice performance, using the SCALE/Polaris lattice physics code. The completed work is continuation of the Light Water Reactor LEU+ Lattice Optimization (ORNL/TM-2021/2366) project. An optimization driver called the metaheuristic optimization tool (MOT) is used to automate domain space exploration and optimization of the lattice designs. Heuristics from previous light-water reactor (LWR) lattice optimization studies were used to construct the objective function and define the domain space for optimization. This work successfully demonstrated that the optimization algorithms of MOT can generate feasible, nonproprietary PWR lattice designs with gadolinia.
Poster on Co2-Locate and Consortium Advancing Technology for Assessment of Lost Oil & Gas Wells (CATALOG) databases presented at the American Geophysical Union (AGU) Fall Meeting 2023.
Poster presentation at the 2024 FECM/NETL Spring R&D Project Review Meeting on Location-specific microstructures and properties of Haynes 282 with laser-wire DED processing.
The Long-Baseline Neutrino Facility (LBNF) will deliver the world's most powerful muon neutrino beam to the Deep Underground Neutrino Experiment (DUNE), initially operating at 1.2 MW and upgradeable to 2.4 MW. Ensuring the accurate direction of this beam is critical for DUNE's precision goals. This talk introduces the Horn Location Sensors (HLS) system, designed to provide precise, relative measurements of the focusing horns, targets, and beam position monitors in the neutrino beamline. The HLS system employs high-precision FSI-based hydrostatic leveling sensors to track vertical motion and tilt, achieving precision on the order of 0.1 mm. Built for minimal maintenance in radioactive environments, the HLS system ensures precise alignment of beamline components during high-power operations. This system is essential for maintaining beam accuracy and enhancing DUNE's scientific performance.
Hydrogen has been identified as a flexible energy carrier with zero or negative emissions across multiple energy systems. It is possible to utilize hydrogen by storing Hyblend, or hydrogen gas blended with methane, in existing natural gas infrastructure. However, the compatibility of adapting the current CH4 storage strategies to include H2 injection has not been fully demonstrated. It is essential that we understand the impact of H2 gas on the naturally occurring microbial community of subsurface storage reservoirs before deploying large-scale H2-CH4 storage. We designed a series of experiments that allowed us to identify potential geochemical and microbial challenges of HyBlend Storage in existing methane reservoirs. First, we collected and characterized field fluid samples from a methane reservoir located in southwestern United States. Next, we used these field fluid samples to complete a series of short-term reactor experiments at reservoir conditions (80 °C and ~1,000 psi) for a natural gas (100% CH4) and HyBlend(80% CH4/20% H2) storage environment to measure the transformation of gas content. We conducted both biotic and abiotic (sterilized) measurements to accurately understand and decouple abiotic and microbially driven processes. Overall, we found that our field sample was characterized by a diverse microbial community with the metabolic capacity for sulfur reduction, iron reduction, and acetogenesis. Across our reactors, there was minimal change in geochemistry.
Trenches 31 and 34 located in the 200 West Area Low-Level Burial Ground (LLBG) are authorized for disposal of low-level and mixed low-level radioactive waste under DOE Order 435.1, Radioactive Waste Management. A revised Disposal Authorization Statement was issued in October 2023 following approval of the performance assessment (PA) and supporting technical basis documents. To be consistent with approved PA calculations, the waste acceptance criteria (WAC) needs to be updated to include concentration limits for Category 1 (CAT1) and Category 3 (CAT3) waste along with the inventory limits. This environmental calculation file (ECF) provides the inventory limits for Category 1 and Category 3 waste disposal of radionuclides at Trench 31 and 34 based on the PA calculations. The concentration limits are not calculated as they are provided in the PA itself. The inventory thresholds (or limits) are calculated for only those radionuclides that are identified in the PA as the primary dose contributors. The primary dose contributors for the groundwater pathway are technetium-99, iodine-129, niobium-94, chlorine-36, molybdenum-93, and niobium-93m while those for the air pathway are tritium and carbon-14.
Large-scale (1MW+) co-located solar and battery storage projects are expanding rapidly in the United States, but their realized contribution to the bulk power system remains poorly understood because public project-level operating data are limited. The Lawrence Berkeley National Laboratory estimates the wholesale market value of 280 operational photovoltaic-plus-storage (PV+S) projects across the seven ISOs/RTOs and 19 additional balancing authorities, representing roughly 95% of the U.S. PV+S fleet in 2024. We model optimized hourly dispatch under energy, capacity, and ancillary-service market opportunities and compare the resulting value with standalone PV value, project-specific levelized cost estimates, and empirical operating or revenue data where available.
Prefabrication promises to industrialize the construction industry. By constructing elements within a manufacturing environment, producers can better control quality and maximize production efficiency. Since the major adoption of prefabrication, a wide variety of prefabricated components have been produced for varying applications such as new construction and exterior wall retrofits. While the production processes of these prefabricated components have seen much innovation, the installation process has remained relatively unchanged for decades. To innovate the installation process with modern technologies, a real-time evaluator (RTE) has been developed to reduce the installation cost of prefabricated components by reducing installation time, decreasing rework, and improving accuracy. The RTE uses developed software solutions with off-the-shelf hardware to assist erectors in completing an installation by measuring the real-time positions of connections and prefabricated components, providing installation guidance through a graphical user interface, and monitoring the accumulated installation errors. An overview of the RTE and proposed workflow is presented. A connection locating system that guides users in expediting the installation of connections is introduced. Laboratory experiments were conducted to determine the accuracy improvement and time savings of the RTE in installing connections for prefabricated components. RTE enabled a time saving of up to 37% compared to traditional connection installation methods using handheld measurement tools.
This data release provides estimates of hydrogens economic potential for possible hydrogen applications and production technologies by geographic location for various scenarios, as described in "The Technical and Economic Potential of the H2@Scale Concept within the United States". We define the economic potential as the quantity of hydrogen at an equilibrium price at which suppliers are willing to sell and consumers are willing to buy the same quantity of hydrogen.
We investigate the feasibility of electromagnetic (EM) geophysics methods to detect the dissociation of gas hydrate specifically from a gas hydrate deposit located in the Ulleung Basin, East Sea, Korea via an integrated flow-geomechanics-EM geophysics simulation. To this end, coupled flow and geomechanics simulation is first performed with the multiple porosity model employed, where a mixed formulation with the finite volume (FV) and finite element (FE) methods are taken for the flow and geomechanics, respectively. From the saturation and porosity fields obtained from the coupled flow and geomechanics, the electrical conductivity model is established for the EM simulation. Solving the partial differential equation of electrical diffusion which is linearized using the 3D finite element method (FEM), the EM fields are then computed. For numerical experiments, particularly two approaches in the configuration for the EM methods are compared in this contribution: the surface-to-surface and the surface-to-borehole methods. When the surface-to-surface EM method is employed, the EM is found to be less sensitive, implying low detectability. Especially for the short term of production, the low detectability is attributed to the similarity of electrical resistivity between the dissociated gas (CH4) and hydrate as well as the specific dissociation pattern within the intercalated composites of the field. On the other hand, when the surface-to-borehole EM method is employed, its sensitivity to capture the produced gas flow is improved, confirming its detectability in monitoring gas flow. Hence, the EM geophysics simulation integrated with coupled flow and geomechanics can be a potential tool for monitoring gas hydrate deposits.
This work proposes and develops an implementation of a fault location method to provide a fast and resilient protection scheme for power distribution systems. The method analyzes the transient dynamics of traveling waves (TWs) to generate features using the discrete wavelet transform (DWT), which are then used to train several graph convolutional network (GCN) models. Faults are simulated in the IEEE 34-node system, which is divided into three protection zones (PZs). The goal is to identify the PZ in which the fault occurs. The GCN models create a distributed protection scheme, as all nodes are able to retrieve a prediction. Given that message-passing between nodes occurs both during training and in the execution of the model, the resiliency of such schemes to communication losses was analyzed and demonstrated. One of the models, which only uses voltage measurements, was implemented on a Texas Instruments F28379D development board. The execution times were monitored to assess the speed of the protection scheme. It is shown that the proposed method can be executed in approximately a millisecond, which is comparable to existing TW protection in the transmission system. For experimental purposes, a DWT-based detection method is employed. A design of a setup to playback TWs using two development boards is also addressed.
Collagen type I is a major constituent of animal bodies. It is found in large quantities in tendon, bone, skin, cartilage, blood vessels, bronchi, and the lung interstitium. It is also produced and accumulates in large amounts in response to certain inflammations such as lung fibrosis. Our understanding of the molecular organization of fibrillar collagen and cellular interaction motifs, such as those involved with immune-associated molecules, continues to be refined. In this study, antibodies raised against type I collagen were used to label intact D-periodic type I collagen fibrils and observed with atomic force microscopy (AFM), and X-ray diffraction (XRD) and immunolabeling positions were observed with both methods. The antibodies bind close to the C-terminal telopeptide which verifies the location and accessibility of both the major histocompatibility complex (MHC) class I (MHCI) binding domain and C-terminal telopeptide on the outside of the collagen fibril. The close proximity of the C-telopeptide and the MHC1 domain of type I collagen to fibronectin, discoidin domain receptor (DDR), and collagenase cleavage domains likely facilitate the interaction of ligands and receptors related to cellular immunity and the collagen-based Extracellular Matrix.
Accurate infectious disease forecasting can inform efforts to prevent outbreaks and mitigate adverse impacts. This study compares the performance of statistical, machine learning (ML), and deep learning (DL) approaches in forecasting infectious disease incidences across different countries and time intervals. We forecasted three diverse diseases: campylobacteriosis, typhoid, and Q-fever, using a wide variety of features (n = 46) from public datasets, e.g., landscape, climate, and socioeconomic factors. We compared autoregressive statistical models to two tree-based ML models (extreme gradient boosted trees [XGB] and random forest [RF]) and two DL models (multi-layer perceptron and encoder–decoder model). The disease models were trained on data from seven different countries at the region-level between 2009–2017. Forecasting performance of all models was assessed using mean absolute error, root mean square error, and Poisson deviance across Australia, Israel, and the United States for the months of January through August of 2018. The overall model results were compared across diseases as well as various data splits, including country, regions with highest and lowest cases, and the forecasted months out (i.e., nowcasting, short-term, and long-term forecasting). Overall, the XGB models performed the best for all diseases and, in general, tree-based ML models performed the best when looking at data splits. There were a few instances where the statistical or DL models had minutely smaller error metrics for specific subsets of typhoid, which is a disease with very low case counts. Feature importance per disease was measured by using four tree-based ML models (i.e., XGB and RF with and without region name as a feature). The most important feature groups included previous case counts, region name, population counts and density, mortality causes of neonatal to under 5 years of age, sanitation factors, and elevation. This study demonstrates the power of ML approaches to incorporate a wide range of factors to forecast various diseases, regardless of location, more accurately than traditional statistical approaches.