Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Lighting control.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

The Electron Spectro-Microscopy (ESM) Beamline at NSLS-II

Photoelectron spectroscopy is a primary tool for the study of the electronic structure of materials and the chemical composition of surfaces. High-resolution angle-resolved photoemission spectroscopy (ARPES) has the unique ability to map the energy bands in momentum space. Furthermore, going beyond the single particle picture, the self-energy corrections caused by correlations in solids can be extracted from the analysis of the emission line shape. The current level of refinement, in terms of energy and angular resolution (ΔE < 1 meV, Δθ < 0.1°), makes the technique sensitive to the lowest energy excitations and the dynamics of electrons, which in turn virtually determine all the macroscopic properties of any system and govern the chemical, electrical, magnetic, and physical processes. Similarly important, X-ray photoelectron microscopy (XPEEM), combined with the low-energy electron microscopy (LEEM), is indispensable in probing the complexity of chemical, structural, electronic and magnetic properties of surfaces and shallow interfaces, with the spatial resolution of few tens of nanometer (nm). The Electron-Spectro-Microscopy beamline (ESM) has been recently commissioned at NSLS-II and is now in operation. The primary spectroscopic technique is photoemission, performed over a wide energy range with control of light polarization and in a variety of flux/resolution conditions. The beamline has two experimental end stations that allow to perform ARPES and XPEEM/LEEM, separately. The ARPES end station focuses on high energy-resolution work, with spot-size of a few microns. The XPEEM/LEEM end station is a full-field microscope (XPEEM) operating either with the synchrotron generated X-rays (XPEEM), or with an internal electron gun (LEEM). Spatial resolution is crucial in studies of newly synthesized complex materials since they are often initially available only as small specimens (typically micron size). Furthermore, chemical inhomogeneities on surfaces are often an integral part of surface chemical processes. Finally, the ESM beamline with X-ray spots of few microns is optimized to study the electronic structure of novel materials with microscopy capabilities.

47 OTHER INSTRUMENTATION↗

Spin-orbit optical cross-phase-modulation

We show experimentally that optical phase singularities (PSs) can be written and erased, locally and in a controllable manner, into a light beam using the giant Kerr optical nonlinearities of liquid crystals. The method relies on the nonlinear optical spin-orbit coupling experienced by a collimated probe beam when a collinear focused pump beam imprints a radial birefringent pattern into a nematic film. In addition, experimental data are quantitatively described, accounting for the elastic anisotropy of the material and its nonlocal spatial response to the pump light field. Since we show that the optical intensity of a light beam (the 'pump') controls the phase of another beam (the 'probe') in a singular fashion (i.e., with the generation of a screw PS) via their interaction in a nonlinear medium that involves spin-orbit coupling, we dubbed such a nonlinear optical process as spin-orbit optical cross-phase-modulation.

74 ATOMIC AND MOLECULAR PHYSICS↗

Polarization-dependent photocurrents in polar stacks of van der Waals solids

Monolayers of semiconducting van der Waals solids, such as transition metal dichalcogenides, acquire significant electric polarization normal to the layers when placed on a substrate or in a heterogeneous stack. This causes a linear coupling of electrons to electric fields normal to the layers. Irradiation at oblique incidence at frequencies above the gap causes interband transitions due to coupling to both normal and in-plane ac electric fields. The interference between the two processes leads to sizable in-plane photocurrents and valley currents. The direction and magnitude of the currents are controlled by light polarization and are determined by their helical or nonhelical components. The helicity-dependent ballistic current arises due to asymmetric photogeneration. The nonhelical current has a ballistic contribution (dominant in sufficiently clean samples) caused by asymmetric scattering of photoexcited carriers, and a side-jump contribution. Here, a magneto-induced photocurrent is due to the Lorentz force or due to an intrinsic magnetic moment related to Berry curvature.

Lyanda-Geller, Y. B.↗

Controlling Interactions between Quantum Emitters Using Atom Arrays

We investigate the potential for two-dimensional atom arrays to modify the radiation and interaction of individual quantum emitters. Specifically, we demonstrate that control over the emission linewidths, resonant frequency shifts, and local driving field enhancement in impurity atoms is possible due to strong dipole-dipole interactions within ordered, subwavelength atom array configurations. We demonstrate that these effects can be used to dramatically enhance coherent dipole-dipole interactions between distant impurity atoms within an atom array. Possible experimental realizations and potential applications are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Optical imprinting of superlattices in two-dimensional materials

We propose a novel optical method to imprint superlattice structures in two-dimensional electronic systems. By changing the shape of the optical field, we synthesize various lattice structures with different spatial symmetry, periodicity, and strength. We find that the wide optical tunability allows one to tune different properties of the effective band structure, including Chern number, energy bandwidths, and band gaps. We consider the high-frequency regime where the electronic system can remain in the quasi-equilibrium phase for an extended amount of time. The spatiotemporal reconfigurablity of our approach opens up new possibilities to control light-matter interaction to generate novel electronic states and optoelectronic devices.

36 MATERIALS SCIENCE↗

Floquet engineering of polaritonic amplification in dispersive photonic time crystals

In this study, we investigate the dynamics of dispersive photonic time crystals (PTCs) and their potential applications for controlling light-matter interaction. Using the Lorentz-Drude as dispersive material model, we analyze the effects of periodic modulation of dispersion parameters through both theoretical and numerical analysis, revealing the emergence of hybrid bandgaps from the interaction of polaritonic branches with distinctive characteristics. Our study demonstrates that dispersive PTCs offer novel excitation channels and amplification possibilities, that require lower modulation frequencies compared to nondispersive systems thus alleviating experimental challenges for the realization of PTCs in the optical regime. These findings pave the way for advancements in polaritonic lasing and resonant Raman scattering.

Classical optics↗

Development of a scalar-based geometric parameterization approach for the crystal structure landscape of dithienylethene-based crystalline solids

Dithienylethenes (DTEs) are a promising class of organic photoswitches that can be used to create crystalline solids with properties controlled by light. However, the ability of DTEs to adopt multiple conformations, only one of which is photoactive, complicates the rational design of these materials. Herein, the synthesis and structural characterization of 19 crystalline solids containing a single DTE molecule are described. A novel D – D analysis of the molecular geometries obtained from rotational potential energy surface calculations and the ensemble of experimental structures were used to construct a crystal landscape for DTE. Of the 19 crystal structures, 17 contained photoinactive DTE rotamers and only 2 were photoactive. These results highlight the challenges associated with the design of these materials. Overall, the D – D analysis described herein provides rapid, effective and intuitive means of linking the molecular structure to photoactivity that could be applied more broadly to afford a general strategy for producing photoactive diarylethene-based crystalline solids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Building superlattices from individual nanoparticles via template-confined DNA-mediated assembly

DNA programmable assembly has been combined with top-down lithography to construct superlattices of discrete, reconfigurable nanoparticle architectures on a gold surface over large areas. Specifically, the assembly of individual colloidal plasmonic nanoparticles with different shapes and sizes is controlled by oligonucleotides containing “locked” nucleic acids and confined environments provided by polymer pores to yield oriented architectures that feature tunable arrangements and independently controllable distances at both nanometer- and micrometer-length scales. These structures, which would be difficult to construct by other common assembly methods, provide a platform to systematically study and control light-matter interactions in nanoparticle-based optical materials. The generality and potential of this approach are explored by identifying a broadband absorber with a solvent polarity response that allows dynamic tuning of visible light absorption.

36 MATERIALS SCIENCE↗

Arbitrary electro-optic bandwidth and frequency control in lithium niobate optical resonators

In situ tunable photonic filters and memories are important for emerging quantum and classical optics technologies. However, most photonic devices have fixed resonances and bandwidths determined at the time of fabrication. Here we present an in situ tunable optical resonator on thin-film lithium niobate. By leveraging the linear electro-optic effect, we demonstrate widely tunable control over resonator frequency and bandwidth on two different devices. We observe up to ∼50 × tuning in the bandwidth over ∼50 V with linear frequency control of ∼230 MHz/V. We also develop a closed-form model predicting the tuning behavior of the device. This paves the way for rapid phase and amplitude control over light transmitted through our device.

42 ENGINEERING↗

Redefining precision interferometry and spectroscopy with high-performance optical interference coatings

High-performance optical interference coatings have transformed precision interferometry and spectroscopy by enabling unparalleled control over light–matter interactions. This review explores recent innovations in ion-beam sputtered amorphous dielectric, as well as substrate-transferred crystalline coatings, and their impact on systems at the forefront of precision metrology. These state-of-the-art coating techniques generate multilayers with ultralow optical losses, yielding mirrors with exceptional reflectivity. Refinements in their noise performance push the ultimate limits of sensitivity, resolution, and stability in demanding laser-based metrology applications. These technologies underpin the most advanced timekeeping and spatial measurement tools, enabling high-finesse reference cavities for the world’s most precise optical atomic clocks and low-noise reflective test masses for km-baseline gravitational-wave detectors. Emerging hybrid designs combining these techniques expand access to the mid-infrared spectral region, enabling the first ultralow-optical-loss coatings in the 3000–5000 nm wavelength range for enhanced spectroscopy and trace-gas detection. We highlight how these technologies redefine coating performance metrics and set new benchmarks in quantum science, fundamental physics, and precision optical sensing.

Cole, Garrett D. [University of Arizona, Tucson, A↗

The road to atomically thin metasurface optics

Abstract The development of flat optics has taken the world by storm. The initial mission was to try and replace conventional optical elements by thinner, lightweight equivalents. However, while developing this technology and learning about its strengths and limitations, researchers have identified a myriad of exciting new opportunities. It is therefore a great moment to explore where flat optics can really make a difference and what materials and building blocks are needed to make further progress. Building on its strengths, flat optics is bound to impact computational imaging, active wavefront manipulation, ultrafast spatiotemporal control of light, quantum communications, thermal emission management, novel display technologies, and sensing. In parallel with the development of flat optics, we have witnessed an incredible progress in the large-area synthesis and physical understanding of atomically thin, two-dimensional (2D) quantum materials. Given that these materials bring a wealth of unique physical properties and feature the same dimensionality as planar optical elements, they appear to have exactly what it takes to develop the next generation of high-performance flat optics.

Brongersma, Mark L.↗

Functionalized Nanoparticles and Surfaces for Controlled Chemical Catalysis and Effective Light Harvesting

We have prepared a range of such arrays as key components for biotechnology and photonic applications. These involve self-assembled arrays of increasing complexity with three-dimensionally disposed multilayer interactions. These arrays also include dendrimers as the distinguishing structural building blocks. These photoactive integrated systems have a regular, highly-branched, three-dimensional architecture. Structural modifications of these units include variation of the core, bridging layers, and terminal groups. These modifications result in a large array of dendritic molecules with potential applications for light harvesting.

14 SOLAR ENERGY↗

Long-Term Instrumentation, Information, and Control Systems (II&C) Modernization Future Vision and Strategy

Life extension beyond 60 years for the U.S operating nuclear fleet requires that instrumentation and control (I&C) systems be upgraded to address aging and reliability concerns. It is impractical for the legacy systems based on 1970’s vintage technology operate over this extended time period. Indeed, utilities have successfully engaged in such replacements when dictated by these operational concerns. However, the replacements have been approached in a like-for-like manner, meaning that they do not take advantage of the inherent capabilities of digital technology to improve business functions. And so, the improvement in I&C system performance has not translated to bottom-line performance improvement for the fleet. Therefore, wide-scale modernization of the legacy I&C systems could prove to be cost-prohibitive unless the technology is implemented in a manner to enable significant business innovation as a means of off-setting the cost of upgrades.

99 GENERAL AND MISCELLANEOUS↗

Templating Routes to Supported Oxide Catalysts by Design

The rational design and understanding of supported oxide catalysts requires at least three advancements, in order of increasing complexity: the ability to quantify the number and nature of active sites in a catalytic material, the ability to place external controls on the number and structure of these active sites, and the ability to assemble these active sites so as to carry out more complex functions in tandem. As part of an individual investigator research program that is integrated with the Northwestern University Institute for Catalysis in Energy Processes (ICEP) as of 2015, significant advances were achieved in these three areas. First, phosphonic acids were utilized in the quantitative assessment of the number of active and geometrically-available sites in MO x -SiO 2 catalysts, including nanocrystalline composites, co-condensed materials, and grafted structures, for M=Ti, Zr, Hf, Nb, and Ta. That work built off progress in understanding supported Fe, Cu, and Co oxide catalysts from chelating and/or multinuclear precursors to maximize surface reactivity. Secondly, significant progress was made in the new area of using thin oxide overcoats containing ‘nanocavities’ from organic templates as a method to control the dispersion and thermal stability of subsequently deposited metal nanoparticles or other catalytic domains. Similar methods were used to control surface reactivity in SiO 2 -Al 2 O 3 acid catalysts and to control reactant selectivity in Al 2 O 3 -TiO 2 photocatalysts. Finally, knowledge gained from the first two areas has been combined to synthesize a tandem catalyst for hydrotreating reactions and an orthogonal tandem catalyst system where two subsequent reactions in a reaction network are independently controlled by light and heat. Overall, work carried out under this project significantly advanced the knowledge of synthesis-structure-function relationships in supported oxide catalysts for energy applications.

02 PETROLEUM↗

Advanced Instrumentation, Information, and Control Systems Technologies Pathway: FY 2016 External Review

This report describes an External Review conducted by the LWRS Program Advanced Instrumentation, Information, and Control (II&C) Systems Technologies Pathway to solicit feedback on the topics and results of the ongoing II&C research program. This review was held in conjunction with the Nuclear Energy Institute (NEI) Digital I&C Working Group meeting that was held at Idaho National Laboratory (INL) on August 9-10, 2016. Given the opportunity to visit INL and see the pathway research projects, NEI agreed that the Working Group would serve as the External Review panel for the purpose of obtaining expert input on the value and timing of the research projects. This consisted of demonstrations in the Human Systems Simulation Laboratory followed by presentations on the II&C research program in general as well as the five technology development areas. Following the meeting, the presentations were sent to each of the attendees so they could review them in more detail and refer to them in completing the feedback form. Follow-up activities were conducted with the attendees following the meeting to obtain the completed feedback forms. A total of 13 forms were returned. The feedback forms were reviewed by the pathway to compile the data and comments received, which are documented in the report. In all, the feedback provided by the External Review participants is taken to be a strong endorsement of the types of projects being conducted by the pathway, the value they hold for the nuclear plants, and the general timing of need. The feedback aligns well with the priorities, levels of efforts allocated for the research projects, and project schedules. The feedback also represents realistic observations on the practicality of some aspects of implementing these technologies. In some cases, the participants provided thoughtful challenges to certain assumptions in the formulation of the technologies or in deployment plans. These deserve further review and revision of plans if warranted. The pathway will take all of the feedback and address the open issues that have been identified by the participants. This includes 11 actionable items for follow up by the II&C Pathway.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗