Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “JET MODEL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Search for W' $\to$ tb in proton-proton collisions at $\sqrt{s} = $ 8 TeV

A search is performed for the production of a massive W' boson decaying to a top and a bottom quark. The data analysed correspond to an integrated luminosity of 19.7 fb$^{–1}$ collected with the CMS detector at the LHC in proton-proton collisions at $ \sqrt{s}=8 $ TeV. The hadronic decay products of the top quark with high Lorentz boost from the W' boson decay are detected as a single top flavoured jet. The use of jet substructure algorithms allows the top quark jet to be distinguished from standard model QCD background. Limits on the production cross section of a right-handed W' boson are obtained, together with constraints on the left-handed and right-handed couplings of the W' boson to quarks. The production of a right-handed W' boson with a mass below 2.02 TeV decaying to a hadronic final state is excluded at 95% confidence level. Furthermore, this mass limit increases to 2.15 TeV when both hadronic and leptonic decays are considered, and is the most stringent lower mass limit to date in the tb decay mode.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

First Search for Multijet Resonances in $\sqrt{s} = 1.96$ TeV $ p\bar{p}$ Collisions

We present the first model independent search for three-jet hadronic resonances within multijet events in $\sqrt{s} = 1.96$ TeV $ p\bar{p}$ collisions at the Fermilab Tevatron using the CDF II detector. Pair production of supersymmetric gluinos and squarks with hadronic R-parity violating decays is employed as an example of a new physics benchmark for this signature. Selection criteria based on the kinetmatic properties of an ensemble of jet combinations within each event help to extract signal from copious QCD background. Our background estimates include all-hadronic t{anti t} decays that have a signature similar to the signal. No significant excess outside the top quark mass window is observed in data with an integrated luminosity of 3.2 fb{sup -1}. We place 95% confidence level limits on the production cross section {sigma}(p{anti p} {yields} X X') x BR ((tilde gg) {yields} 3 jet + 3 jet) where X, X' = {tilde g}, {tilde q}, or {tilde {anti q}}, with {tilde q}, {tilde {anti q}} {yields} {tilde g} + jet, as a function of gluino mass, in the range of 77 GeV/c{sup 2} to 240 GeV/c{sup 2}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Electron-Proton Scattering Event Generation using Structured Tokenization

Recent work such as Omnijet-$\alpha$ has demonstrated that effective tokenization combined with transformer-based architectures can produce effective foundation models for jet physics. While tokenization may help models capture generalizable event characteristics, it also introduces discretization errors that may compromise the precision required for downstream physics analyses. As the number and complexity of the particle features grow, these errors are likely to grow proportionally. In this study, we investigate new tokenization strategies to improve the application of generative transformer models to \textsc{Pythia8} simulations of electron-proton scattering at the Electron-Ion Collider. Specifically, we propose a feature-based structured tokenization approach that utilizes multiple tokens per particle, improving expressivity, while reducing the total number of unique tokens needed. We evaluate this method against grid-based binning, K-means clustering, and vector-quantized variational auto-encoders on the event simulations. Our results show that feature-based structured tokenization reduces discretization error, leading to more accurate generative modeling of particle-level events.

Goldenberg, Steven [Thomas Jefferson National Acce↗

High current hollow cathode phenomena

Experimental results show that the energies of ions produced near a hollow cathode orifice can be several times the anode-to-cathode potential difference generally considered available to accelerate them. These energies (of order 50 eV) are sufficient to induce substantial sputter erosion rates. Increases in discharge current (to 60 A) cause the energies and current densities of these jet ions to increase substantially. A model describing jet ion generation is proposed. The effects of discharge current on cathode internal pressure are also examined experimentally and described phenomenologically.

Friedly, Verlin J.↗

Search for New Physics with a Single Top Quark Signature in the Boosted All Hadronic Final State.

We present two searches for massive resonances decaying with a single top-quark signature. First, we present a search for the W’ boson decaying to a top and bottom quark, then a search for the singly produced b∗ quark decaying to a top quark and W boson. The data analysed for these searches corresponds to an integrated luminosity of 19.7 fb−1 collected by the CMS detector in proton-proton collisions at √ s = 8 TeV. The use of cutting edge jet substructure algorithms allows the top quark jet to be distinguished from standard model hadronic jet backgrounds and is the central feature of these analyses. We set 95% C.L. limits on the production cross section of a right-handed W’ boson, together with constraints on the left and right-handed couplings of the W’ boson to quarks. The production of a right-handed W’ boson with a mass below 2.02 TeV decaying to an all-hadronic final state is excluded. This mass limit increases to 2.15 TeV when both all-hadronic and semileptonic decays are considered. Additionally, limits on the production cross section of the right-handed, left-handed, and vectorlike b∗ quark boson are obtained. The masses of the left-handed, ii ABSTRACT right-handed and vectorlike b∗ -quark states are excluded in the range of 880-1390 GeV, 820-1430 GeV, and 800-1530 GeV respectively when considering the all-hadronic channel only. The masses of the left-handed, right-handed and vectorlike b∗ -quark states are excluded below 1390, 1420 and 1520 GeV when considering the combined all-hadronic, semileptonic, and dileptonic channels.

Nash, Kevin↗

Electron-Proton Scattering Event Generation using Structured Tokenization

Recent work such as Omnijet-$\alpha$ has demonstrated that effective tokenization combined with transformer-based architectures can produce effective foundation models for jet physics. While tokenization may help models capture generalizable event characteristics, it also introduces discretization errors that may compromise the precision required for downstream physics analyses. As the number and complexity of the particle features grow, these errors are likely to grow proportionally. In this study, we investigate new tokenization strategies to improve the application of generative transformer models to \textsc{Pythia8} simulations of electron-proton scattering at the Electron-Ion Collider. Specifically, we propose a feature-based structured tokenization approach that utilizes multiple tokens per particle, improving expressivity, while reducing the total number of unique tokens needed. We evaluate this method against grid-based binning, K-means clustering, and vector-quantized variational auto-encoders on the event simulations. Our results show that feature-based structured tokenization reduces discretization error, leading to more accurate generative modeling of particle-level events.

Goldenberg, Steven [Thomas Jefferson National Acce↗

Effect of Temperature on Jet Velocity Spectra

Statistical jet noise prediction codes that accurately predict spectral directivity for both cold and hot jets are highly sought both in industry and academia. Their formulation, whether based upon manipulations of the Navier-Stokes equations or upon heuristic arguments, require substantial experimental observation of jet turbulence statistics. Unfortunately, the statistics of most interest involve the space-time correlation of flow quantities, especially velocity. Until the last 10 years, all turbulence statistics were made with single-point probes, such as hotwires or laser Doppler anemometry. Particle image velocimetry (PIV) brought many new insights with its ability to measure velocity fields over large regions of jets simultaneously; however, it could not measure velocity at rates higher than a few fields per second, making it unsuitable for obtaining temporal spectra and correlations. The development of time-resolved PIV, herein called TR-PIV, has removed this limitation, enabling measurement of velocity fields at high resolution in both space and time. In this paper, ground-breaking results from the application of TR-PIV to single-flow hot jets are used to explore the impact of heat on turbulent statistics of interest to jet noise models. First, a brief summary of validation studies is reported, undertaken to show that the new technique produces the same trusted results as hotwire at cold, low-speed jets. Second, velocity spectra from cold and hot jets are compared to see the effect of heat on the spectra. It is seen that heated jets possess 10 percent more turbulence intensity compared to the unheated jets with the same velocity. The spectral shapes, when normalized using Strouhal scaling, are insensitive to temperature if the stream-wise location is normalized relative to the potential core length. Similarly, second order velocity correlations, of interest in modeling of jet noise sources, are also insensitive to temperature as well.

Bridges, James E.↗

Offset Stream Technology Test-Summary of Results

Statistical jet noise prediction codes that accurately predict spectral directivity for both cold and hot jets are highly sought both in industry and academia. Their formulation, whether based upon manipulations of the Navier-Stokes equations or upon heuristic arguments, require substantial experimental observation of jet turbulence statistics. Unfortunately, the statistics of most interest involve the space-time correlation of flow quantities, especially velocity. Until the last 10 years, all turbulence statistics were made with single-point probes, such as hotwires or laser Doppler anemometry. Particle image velocimetry (PIV) brought many new insights with its ability to measure velocity fields over large regions of jets simultaneously; however, it could not measure velocity at rates higher than a few fields per second, making it unsuitable for obtaining temporal spectra and correlations. The development of time-resolved PIV, herein called TR-PIV, has removed this limitation, enabling measurement of velocity fields at high resolution in both space and time. In this paper, ground-breaking results from the application of TR-PIV to single-flow hot jets are used to explore the impact of heat on turbulent statistics of interest to jet noise models. First, a brief summary of validation studies is reported, undertaken to show that the new technique produces the same trusted results as hotwire at cold, low-speed jets. Second, velocity spectra from cold and hot jets are compared to see the effect of heat on the spectra. It is seen that heated jets possess 10 percent more turbulence intensity compared to the unheated jets with the same velocity. The spectral shapes, when normalized using Strouhal scaling, are insensitive to temperature if the stream-wise location is normalized relative to the potential core length. Similarly, second order velocity correlations, of interest in modeling of jet noise sources, are also insensitive to temperature as well.

Brown, Clifford A.↗

Multiaxis thrust vectoring using axisymmetric nozzles and postexit vanes on an F/A-18 configuration vehicle

A ground-based investigation was conducted on an operational system of multiaxis thrust vectoring using postexit vanes around an axisymmetric nozzle. This thrust vectoring system will be tested on the NASA F/A-18 High Alpha Research Vehicle (HARV) aircraft. The system provides thrust vectoring capability in both pitch and yaw. Ground based data were gathered from two separate tests at NASA Langley Research Center. The first was a static test in the 16-foot Transonic Tunnel Cold-Jet Facility with a 14.25 percent scale model of the axisymmetric nozzle and the postexit vanes. The second test was conducted in the 30 by 60 foot wind tunnel with a 16 percent F/A-18 complete configuration model. Data from the two sets are being used to develop models of jet plume deflection and thrust loss as a function of vane deflection. In addition, an aerodynamic interaction model based on plume deflection angles will be developed. Results from the scale model nozzle test showed that increased vane deflection caused exhaust plume turning. Aerodynamic interaction effects consisted primarily of favorable interaction of moments and unfavorable interaction of forces caused by the vectored jet plume.

Bowers, Albion H.↗

Multistage Monte Carlo simulation of jet modification in a static medium

In this work, the modification of hard jets in an extended static medium held at a fixed temperature is studied using three different Monte Carlo event generators: linear Boltzmann transport (LBT), modular all twist transverse-scattering elastic-drag and radiation (MATTER), and modular algorithm for relativistic treatment of heavy-ion interactions (MARTINI). Each event generator contains a different set of assumptions regarding the energy and virtuality of the partons within a jet versus the energy scale of the medium and, hence, applies to a different epoch in the space-time history of the jet evolution. Here modeling is developed where a jet may sequentially transition from one generator to the next, on a parton-by-parton level, providing a detailed simulation of the space-time evolution of medium modified jets over a much broader dynamic range than has been attempted previously in a single calculation. Comparisons are carried out for different observables sensitive to jet quenching, including the parton fragmentation function and the azimuthal distribution of jet energy around the jet axis. The effect of varying the boundary between different generators is studied and a theoretically motivated criterion for the location of this boundary is proposed. Lastly, the importance of such an approach with coupled generators to the modeling of jet quenching is discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Forward and Diffractive Physics with Early ATLAS data

Proton-proton collisions at the Large Hadron Collider will soon commence and measurements of diffractive processes may be some of the first results produced. These proceedings outline some of the planned early measurements of diffractive physics and forward jets by the ATLAS collaboration.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A simultaneous understanding of jet and hadron suppression

In the context of the hybrid strong/weak coupling model for jet quenching, we perform a global fit to hadron and jet data in the most central bins both at RHIC and LHC. The qualitative and quantitative success of the analysis is attributed to the fact that the model correctly captures the fact that wider jets lose, on average, more energy than the narrower ones, to which high energy hadrons belong. We show how one can understand the relative jet and hadron suppression by analyzing the jet fragmentation functions, and also discuss the role of plasma finite resolution effects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A computational model for the prediction of jet entrainment in the vicinity of nozzle boattails (the BOAT code)

The development of a computational model (BOAT) for calculating nearfield jet entrainment, and its incorporation in an existing methodology for the prediction of nozzle boattail pressures, is discussed. The model accounts for the detailed turbulence and thermochemical processes occurring in the mixing layer formed between a jet exhaust and surrounding external stream while interfacing with the inviscid exhaust and external flowfield regions in an overlaid, interactive manner. The ability of the BOAT model to analyze simple free shear flows is assessed by comparisons with fundamental laboratory data. The overlaid procedure for incorporating variable pressures into BOAT and the entrainment correction employed to yield an effective plume boundary for the inviscid external flow are demonstrated. This is accomplished via application of BOAT in conjunction with the codes comprising the NASA/LRC patched viscous/inviscid methodology for determining nozzle boattail drag for subsonic/transonic external flows.

Dash, S. M.↗

Physics and evolution of constant opening angle jets using a quasi-one-dimensional magnetohydrodynamic model

We discuss the significance of the assumptions of infinite conductivity and time independence in the context of an ideal MHD model for constant opening angle jets. The model is developed by projecting the MHD equations onto the jet axis. We find that for initially sub-Alfvenic flows (i.e., flows emanating from active galactic nuclei and neutron stars) wind-type solutions exist only when the field lines at the origin are wound up in a direction opposite to the direction of rotation of the compact source. We discuss the possibility that the time evolution of these outflows may be a cycle between breeze- and wind-type solutions as a result of continuous changes in the boundary conditions at the origin due to accretion. We propose that such cycles may explain the apparent one-sideness of some jets, especially the ones for which we cannot use arguments of relativistic beaming. We examine the dependence of the wind-type solutions on the following parameters describing the outflow at the origin: the degree of winding of the field lines, the value of the gas pressure, the polytropic index, the strength of the magnetic field, the value of the rotational velocity, the gravitational potential of the compact object, and the injection velocity. We compare results with results obtained previously, and discuss briefly the qualitative features and physical interpretation of the solutions for outflows emanating from neutron stars and protostars.

Koupelis, Theodoros↗

Analysis of turbulent underexpanded jets. I - Parabolized Navier-Stokes model, SCIPVIS

A new computational model (SCIPVIS) is described which predicts the multiple-cell wave/shock structure in underexpanded or overexpanded turbulent jets. SCIPVIS solves the parabolized Navier-Stokes jet-mixing equations utilizing a shock-capturing approach in supersonic regions of the jet and a pressure-split approach in subsonic regions. Turbulence processes are represented by the solution of compressibility-corrected two-equation turbulence models. SCIPVIS presently analyzes jets exhausting into a quiescent or supersonic external stream for which a single-pass spatial-marching solution can be obtained. The features of SCIPVIS are reviewed, and calculations are described exhibiting the influence of turbulence modelling, jet temperature, and flight velocity on the jet shock structure.

Dash, S. M.↗

Diffraction and forward physics results of the ATLAS experiment from the Run I

Various aspects of forward physics have been studied by the ATLAS collaboration using data from Run I at the LHC. In this text, main results of four published analyses are summarized, all based on data from proton-proton collisions at √(s)=7 TeV collected in 2010 or 2011. Two analyses deal with the diffractive signature, one based on single-sided events, the other on large rapidity gaps in soft events. In addition, a recent measurement of the total pp cross section using the ALFA subdetector and a recent study of higher-order QCD effects using a jet veto are discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

GRB and blazar jets shining through their stripes

Black hole-driven relativistic astrophysical jets, such as blazars and gamma-ray bursts (GRBs), are powerful sources of electromagnetic radiation. Their emission is powered by some energy dissipation and particle acceleration mechanism operating in situ at large distances from the black hole. We propose that the formation of the dissipative structures in the jet is controlled by the time variability of the accretion disc. We argue that the open magnetic field lines through the black hole, which drive a strongly magnetized jet, may have their polarity reversing over time-scales related to the growth of the magnetorotational dynamo in the disc. Consequently, the jet is characterized by an alternating toroidal field polarity along its propagation axis, i.e. it is a ‘striped jet’. Magnetic reconnection in the current sheets that form between the stripes dissipates the alternating field energy and thus powers further jet acceleration. Here, we consider a jet with a broad distribution of stripe widths l > l min , above a dominant scale l min . We find that the bulk acceleration of the jet, driven by the annihilation of the stripes, is very gradual. The dissipation rate peaks at a distance $z_{\rm peak}\sim 10^6 R_\mathrm{ g}\, (\Gamma _\infty /30)^2\, (l_{\rm min}/1000R_\mathrm{ g})$| , where R g is the black hole’s gravitational radius and Γ ∞ the jet’s asymptotic Lorentz factor, and exhibits a very broad plateau extending by ~4–5 orders of magnitude in distance. The prolonged energy dissipation accounts for the flat-to-inverted long-wavelength spectra commonly observed in jets. The model can also account for the broad range of flaring time-scales of blazars and the fact that their bulk acceleration appears to continue out to ~100 pc scales. In GRB jets, the model predicts comparable power for the photopsheric and Thomson-thin emission components.

79 ASTRONOMY AND ASTROPHYSICS↗

Modeling of Turbulence Effects on Liquid Jet Atomization and Breakup

Recent experimental investigations and physical modeling studies have indicated that turbulence behaviors within a liquid jet have considerable effects on the atomization process. For certain flow regimes, it has been observed that the liquid jet surface is highly turbulent. This turbulence characteristic plays a key role on the breakup of the liquid jet near to the injector exit. Other experiments also showed that the breakup length of the liquid core is sharply shortened as the liquid jet is changed from the laminar to the turbulent flow conditions. In the numerical and physical modeling arena, most of commonly used atomization models do not include the turbulence effect. Limited attempts have been made in modeling the turbulence phenomena on the liquid jet disintegration. The subject correlation and models treat the turbulence either as an only source or a primary driver in the breakup process. This study aims to model the turbulence effect in the atomization process of a cylindrical liquid jet. In the course of this study, two widely used models, Reitz's primary atomization (blob) and Taylor-Analogy-Break (TAB) secondary droplet breakup by O Rourke et al. are examined. Additional terms are derived and implemented appropriately into these two models to account for the turbulence effect on the atomization process. Since this enhancement effort is based on a framework of the two existing atomization models, it is appropriate to denote the two present models as T-blob and T-TAB for the primary and secondary atomization predictions, respectively. In the primary breakup model, the level of the turbulence effect on the liquid breakup depends on the characteristic time scales and the initial flow conditions. This treatment offers a balance of contributions of individual physical phenomena on the liquid breakup process. For the secondary breakup, an addition turbulence force acted on parent drops is modeled and integrated into the TAB governing equation. The drop size formed from this breakup regime is estimated based on the energy balance before and after the breakup occurrence. The turbulence energy is also considered in this process.

Trinh, Huu↗