Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERMETALLIC COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Postirradiation examination of recently irradiated metallic fuel concepts

In fast neutron spectrum nuclear reactors, metallic uranium alloys have often been chosen because of their high uranium density, high thermal conductivity, and several reactor kinetic safety benefits. Metallic uranium is often alloyed to raise the melting temperature or to modify the microstructure which improves irradiation performance. Recent irradiations have explored additional alloys and geometric forms beyond what has historically been irradiated (U-10 weight % Zr, 75% smeared density, sodium bonded fuel). Postirradiation examination results and how these results can be incorporated into modelling and simulation will be presented. The evaluated fuels fall into four categories alternative alloying metals, additives, sodium bond removal, and alternative smear densities. For alternative alloys, Zr has been substituted for 10% Mo or 5% Mo, 4.3%Ti, 0.7%Zr to stabilize the cubic phase of U and prevent constituent redistribution seen in U-Zr alloys. Unfortunately these alloys have significant, undesirable interactions with cladding during irradiation. Additives, such as Pd, have been suggested to bind lanthanide fission products, which interact with cladding limiting fuel performance, into high temperature intermetallic compounds. Irradiation results indicate there may be targeted applications such as high burnup fuel or recycled fuel with lanthanide carry-over where additives are useful. Sodium bonding is considered undesirable at the back end of the fuel cycle where sodium bonded fuel must be treated to remove sodium prior to geological disposition. Helium bonded metallic fuel of several alloys has been irradiated to better understand the implications of removing sodium bonding. Current results show that with proper dimensional tolerances on the final fuel slug, helium bonding is feasible. Low smear density fuel is necessary to enable high (30 atom %) burnup. Both solid and annular low smear density fuels have also been examined, and their performance is also discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Status Report on the Development of a Thermodynamic Database for Use with Metallic Fuel Design

The scope of this FY18 milestone involves the development of a high fidelity thermodynamic database for the U-Mo-Ti-Zr system to support the accelerated design of new pseudo binary U-xM metallic fuel, where M is a ternary metallic additive composed of Mo, Ti and Zr and x is the additive amount. Based on the previous assessment of the Mo-Ti-Zr ternary system performed in FY17, a complete set of thermodynamic model parameters describing the U-Mo-Ti-Zr quaternary system over the entire composition and temperature range have been developed in this work using the CALPHAD (CALculation of PHAse Diagrams) approach with inputs from both experimental measurements and density functional theory (DFT) total energy calculations. The two ternary intermetallic compounds, the delta phase in the U-Ti-Zr system and the cubic C15 Laves phase in the Mo-Ti-Zr system, are modeled using physically-based two-sublattice compound energy formalism. The liquid, bcc and hcp phases are described using the random solution model. Using the present database, the melting temperatures and bcc onset temperatures of U-xM metallic fuels are predicted as a function of both additive composition and amount. An optimal metallic additive composition has been identified in this work.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Process Robustness of Friction Stir Dovetailing of AA7099 to Steel with In Situ AA6061 Interlayer Linking

Rolled homogeneous armor (RHA) steel was joined to aluminum alloy AA7099-T7451 with an interlayer of AA6061-T651 by single-pass friction stir dovetailing (FSD). The evolution of the AA7099/AA6061 and AA6061/steel interfacial microstructures and mechanical properties of the joints were examined. The AA6061 interlayer prevented Zn migration from the AA7099 to the steel during FSD and inhibited formation of brittle, Zn-rich, Fe-Al intermetallic compounds within the joint. The flow of the dissimilar aluminum alloys at the interface was controlled with a partially threaded friction stir welding pin and a dovetail geometric configuration optimized in previous work. The process robustness was explored to establish parameter windows by elucidating parametric effects on the relationship between process conditions and the joint’s microstructure and mechanical properties. Ranges of process forge force (50–70 kN) and interface temperature (475°C–515°C) consistently yielded joints with adequate performance. The load-carrying capacity in lap shear tensile tests was 2025 ? 100 N/mm.

Friction Stir Dovetailing, FSW, AA7099, AA6061, Ro↗

Dissimilar joining of ZEK100 and AA6022 for automotive application

Mg and Al joining is problematic due to different high temperature flow characteristics that often results in weld defects and brittle intermetallic compounds (IMC). We present process development on lap joining of 1.27 mm 6022 (top sheet) and 1.5mm ZEK100 (bottom sheet) for an automotive door application. We conducted process development in linear welding using power control mode (modulating torque and spindle speed) with multiple tool designs, and welding parameters. Process variables were correlated to joint micro-structure and mechanical properties. A 2D computational model was created to understand the failure mechanism and contribution of mechanical interlocking towards joint strength. For a thin (< 2 mm) automotive sheet with softer material as a bottom sheet, adequate control of process variables is critical to maintain weld stability and avoid excessive IMC layer at the interface. A combination of mechanical anchoring and metallurgical reaction is likely responsible for bonding.

Das, Hrishikesh↗

Entanglement between a muon spin and $I>\frac{1}{2}$ nuclear spins

We report on the first example of quantum coherence between the spins of muons and quadrupolar nuclei. We observe this effect in vanadium intermetallic compounds which adopt the A15 crystal structure, and whose members include all technologically dominant superconductors. The entangled states are extremely sensitive to the local structural and electronic environments through the electric field gradient at the quadrupolar nuclei. This case-study demonstrates that positive muons can be used as a quantum sensing tool to probe also structural and charge related phenomena in materials, even in the absence of magnetic order.

Bonfà, Pietro↗

Calcium-metal alloy anode materials for reversible calcium-ion batteries

Calcium ion batteries are provided. The calcium ion batteries include a cathode, an alloying anode composed of one or more intermetallic calcium compounds in electrical communication with the cathode; and an electrolyte disposed between the anode and the cathode. The intermetallic calcium compounds are intermetallic compounds of calcium and transition metals and metalloids.

Yao, Zhenpeng↗

R 5 T 4 compounds - unique multifunctional intermetallics for basic research and applications

The unique properties of the rare-earth elements and their alloys have brought them from relative obscurity to high profile use in common high-tech applications. The broad technological impact of these remarkable materials may have never been known by the general public if not for the supply concerns that placed the rare-earth materials on the front page of newspapers and magazines. Neodymium and dysprosium, two essential components of Nd 2 Fe 14 B-based high-performance permanent magnets, have drawn much attention and have been deemed critical materials for many energy-related applications. Ironically, the notoriety of rare-earth elements and their alloys is the result of a global movement to reduce their use in industrial applications and, thus, ease concerns about their supply and ultimately to reduce their position in high-tech supply chains. Research into the applications of lanthanide alloys has been de-emphasized recently due to the perception that industry is moving away from the use of rare-earth elements in new products. While lanthanide supply challenges justify efforts to diversify the supply chain, a strategy to completely replace the materials overlooks the reasons rare earths became important in the first place -- their unique properties are too beneficial to ignore. Rare-earth alloys and compounds possess truly exciting potential for basic science exploration and application development such as solid-state caloric cooling. In this brief review, we touch upon several promising systems containing lanthanide elements that show important and interesting magnetism-related phenomena.

36 MATERIALS SCIENCE↗

Gold Polar Intermetallics: Structural Versatility through Exclusive Bonding Motifs

The design of new materials with desired chemical and physical characteristics requires thorough understanding of the underlying composition–structure–property relationships and the experimental possibility of their modification through the controlled involvement of new components. From this point of view, intermetallic phases, a class of compounds formed by two or more metals, present an endless field of combinations that produce several chemical compound classes ranging from simple alloys to true ionic compounds. Polar intermetallics (PICs) belong to the class that is electronically situated in the middle, between Hume–Rothery phases and Zintl compounds and possessing e/a (valence electron per atom) values around 2. In contrast to the latter, where logical rules of formation and classification systems were developed decades ago, polar intermetallics remain a dark horse with a huge diversity of crystal structures but unclear mechanisms of their formation. Partial incorporation of structural and bonding features from both nonpolar and Zintl compounds is commonly observed here. A decent number of PICs can be described in terms of complex metallic alloys (CMAs) following the Hume–Rothery electron-counting schemes but exhibit electronic structure changes that cannot be explained by the latter. Our research is aimed at the discovery and synthesis of new polar intermetallic compounds, their structural characterization, and investigation of their properties in line with the analysis of the principles connecting all of these components. Understanding of the basic structural tendencies is one of the most anticipated outcomes of this analysis, and systematization of the available knowledge is the initial and most important step. Here in this Account, we focus on a well-represented but rather small section of PICs: ternary intermetallic compounds of gold with electropositive and post-transition metals of groups 12 to 15. The strong influence of relativistic effects in its chemical bonding results in special, frequently unique structural motifs, while at the same time gold participates in common structure types as an ordinary transition element. Enhanced bonding strength leads to the formation and stabilization of complex homo- and heteroatomic clusters and networks that are compositionally restricted to just a few options throughout the periodic table. Because it has the highest absolute electronegativity among metals, comparable to those of some halogens, gold usually plays the role of an anion, even being able to form true salts with the most electropositive metals. We discuss the occurrence of the structure types and show the place of gold intermetallics in the general picture. Among the structures considered are ones as common as AlB 2 or BaAl 4 types, in line with the recently discovered diamond-like homoatomic metal networks, formation of local fivefold symmetry, different types of tunneled structures, and more complex intergrown multicomponent structures.

36 MATERIALS SCIENCE↗

High Density of Strong yet Deformable Intermetallic Nanorods Leads to an Excellent Room Temperature Strength-Ductility Combination in a High Entropy Alloy

This paper introduces a new microstructural template for high entropy alloys (HEAs), where the face centered cubic (FCC) complex concentrated solid solution is reinforced with a high density of strong, yet deformable, nanorods of an ordered multi-component intermetallic L12 compound. Thermodynamic modeling has been employed to design this HEA with a large L12 volume fraction. Thermo-mechanical processing by isothermal annealing of the conventionally processed bulk cold-rolled alloy directly at precipitation temperatures, has been applied to produce a high density of uniformly distributed L12 nanorods within refined FCC grains, resulting from concomitant recrystallization and discontinuous precipitation processes. The nanorod morphology of the discontinuous L12 product has been established from three-dimensional atom probe tomography. The refined grains result in a complete coverage of the microstructure with discontinuously precipitated intermetallic nanorods. This nanorod strengthened HEA exhibits an exceptionally high room temperature yield strength of ~1630 MPa, good tensile ductility of ~15%, and an ultimate tensile strength of ~1720 MPa. Furthermore, a single L12 phase alloy, melted based on the precipitate composition in the two-phase FCC + L12 HEA, exhibits very high compressive deformability and strain hardenability, unusual for ordered intermetallic compounds. These results open a new strategy for design of fine-grained microstructures strengthened via ordered intermetallic phases, exploiting the beneficial effects of discontinuous precipitation, for achieving very high room temperature tensile strengths while maintaining good ductility.

Gwalani, Bharat↗

Experimental formation enthalpies for intermetallic phases and other inorganic compounds

The standard enthalpy of formation of a compound is the energy associated with the reaction to form the compound from its component elements. The standard enthalpy of formation is a fundamental thermodynamic property that determines its phase stability, which can be coupled with other thermodynamic data to calculate phase diagrams. Calorimetry provides the only direct method by which the standard enthalpy of formation is experimentally measured. However, the measurement is often a time and energy intensive process. We present a dataset of enthalpies of formation measured by high-temperature calorimetry. The phases measured in this dataset include intermetallic compounds with transition metal and rare-earth elements, metal borides, metal carbides, and metallic silicides. These measurements were collected from over 50 years of calorimetric experiments. The dataset contains 1,276 entries on experimental enthalpy of formation values and structural information. Most of the entries are for binary compounds but ternary and quaternary compounds are being added as they become available. In conclusion, the dataset also contains predictions of enthalpy of formation from first-principles calculations for comparison.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Revealing the Chemical State of Palladium in Operating In 2 O 3 Gas Sensors: Metallic Pd Enhances Sensing Response and Intermetallic In x Pd y Compound Blocks It

The sensing response of metal oxides activated with noble metal nanoparticles is significantly influenced by changes to the chemical state of corresponding elements under operating conditions. Here, a PdO/rh-In 2 O3 consisting of PdO nanoparticles loaded onto rhombohedral In 2 O 3 was studied as a gas sensor for H 2 gas (100–40000 ppm in an oxygen-free atmosphere) in the temperature range of 25–450 °C. The phase composition and chemical state of elements were examined by resistance measurements combined with synchrotron-based in situ X-ray diffraction and ex situ X-ray photoelectron spectroscopy. As found, PdO/rh-In 2 O 3 undergoes a series of structural and chemical transformations during operation: from PdO to Pd/PdH x and finally to the intermetallic In x Pd y phase. The maximal sensing response (R N2 /R H2 ) of ~5 · 10 7 towards 40000 ppm (4 vol %) H 2 at 70 °C is correlated with the formation of PdH 0.706 /Pd. The In x Pd y intermetallic compounds formed around 250 °C significantly decrease the sensing response.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Intermetallic electrodes for lithium batteries

This invention relates to intermetallic negative electrode compounds for non-aqueous, electrochemical lithium cells and batteries. More specifically, the invention relates to one or more electrode components or compositions, one of which contains the basic structural unit of a MM′3 intermetallic compound, in which M and M′ are comprised of one or more metals. The MM′3 intermetallic electrode compounds can be mixed, blended or integrated with one or more other intermetallic compounds, such as isostructural M3M′ compounds. The electrodes are of particular use in rechargeable lithium-ion cells and batteries in numerous applications such as portable electronic devices, medical devices, space, aeronautical and defense-related devices and in transportation applications such as electric and hybrid-electric vehicles.

25 ENERGY STORAGE↗

Structure, magnetic and electrical properties of CeIrSb and its hydride CeIrSbH{sub 0.8}

The ternary antimonide CeIrSb absorbs hydrogen under moderate temperature and pressure conditions (4 MPa and 573 K), leading to the hydride CeIrSbH{sub 0.8}. The crystal structures of both compounds have been investigated by X-ray diffraction on powders and single crystals: TiNiSi type, space group Pnma, a=735.07(7), b=456.93(4), c=792.8(1) pm, R1/wR2=0.0206/0.0395, 601 F{sup 2} values for CeIrSb and a=728.16(14), b=460.35(6), c=825.87(2) pm, R1/wR2=0.0322/0.0735, 528 F{sup 2} values for CeIrSbH{sub 0.8} with 20 variables per refinement. Hydrogenation induces both an increase of the cell volume V (+4%) and a strongly anisotropic expansion of the unit cell with a maximum of 4.3% in the c direction, leading to a significant increase of the Ce-Ir and Ce-Ce distances in this direction. The H-insertion into CeIrSb leads to a magnetic transition from intermediate valence to antiferromagnetic behavior (T{sub N}=7.0 K) evidenced by magnetization, electrical resistivity and specific heat measurements. This transition can be explained on the basis of the Doniach diagram considering the J{sub cf} interaction between the 4f(Ce) and conduction electrons. - Graphical Abstract: Cerium coordination in CeIrSb and CeIrSbH{sub 0.8}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mixed valence and metamagnetism in a metal flux grown compound Eu{sub 2}Pt{sub 3}Si{sub 5}

A new compound Eu{sub 2}Pt{sub 3}Si{sub 5} with plate shaped morphology has been grown from excess In flux. The compound crystallizes in the orthorhombic U{sub 2}Co{sub 3}Si{sub 5} structure type, Ibam space group and the lattice parameters are a=10.007(2) Å, b=11.666(2) Å and c=6.0011(12) Å. The crystal structure of this compound can be conceived as inter-twinned chains of [Pt{sub 2}Si{sub 2}] and [PtSi{sub 3}] tetrahedra connected along [100] direction to give rise to a complex three dimensional [Pt{sub 3}Si{sub 5}] network. Temperature dependent magnetic susceptibility data suggests that Eu{sub 2}Pt{sub 3}Si{sub 5} undergoes a strong antiferromagnetic ordering (T{sub N}=19 K) followed by a weak ferromagnetic transition (T{sub C}=5.5 K). The effective magnetic moment/Eu obtained from susceptibility data is 6.78 μ{sub B} accounts mixed valent Eu with almost 85% divalent Eu, which is supported by X-ray absorption near edge spectroscopy. The compound undergoes a metamagnetic transition under applied magnetic field through a probable spin flop mechanism. - Graphical abstract: Eu{sub 2}Pt{sub 3}Si{sub 5}, a new member in the U{sub 2}Co{sub 3}Si{sub 5} (Ibam) family undergoes metamagnetic transition at high magnetic field and Eu is in mixed valence state. - Highlights: • A new compound Eu{sub 2}Pt{sub 3}Si{sub 5} has been synthesized using indium as an inactive metal flux. • The compound undergoes metamagnetic transition at higher field. • Eu in this compound resides in a mixed valence state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influencing mechanism of Al-containing Zn coating on interfacial microstructure and mechanical properties of friction stir spot welded Mg–steel joint

Highlights: • Al-containing Zn coating improved Mg–steel interfacial wettability during friction stir spot welding (FSSW). • Pre-existing Al{sub 5}Fe{sub 2} phase in coating on steel surface promoted Mg–steel metallurgical bonding. • A high tensile-shear load of 4.3 kN was obtained in FSSW AZ31–steel joint. - Abstract: 2.4 mm thick AZ31 Mg alloy sheet and 1.5 mm Q234 steel sheet with a hot-dipped Al-containing Zn coating were friction stir spot welded (FSSW) using a pinless tool. It was shown that the Al-containing Zn coating played a crucial role in joining the Mg alloy and steel during FSSW. The Zn coating observably improved the Mg–steel interfacial wettability during FSSW, and the Al{sub 5}Fe{sub 2} phase in the Zn coating on the steel substrate surface promoted the metallurgical bonding of Mg alloy and steel. It was confirmed that the Al{sub 5}Fe{sub 2} phase on the steel surface resulted from the reaction between the steel substrate and the Al in the Zn coating during hot-dipping, and was not related to the Al-containing Mg alloy substrate. The tensile-shear load of the FSSW Mg–steel joint reached 4.3 kN. The fracture of the joint occurred along the interface on the steel substrate side. The interface between the Al{sub 5}Fe{sub 2} layer and Mg alloy substrate was the weakest region of the Mg–steel joint.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Preparation and characterization of the Al-Cu-Mg-Si-Mn composites reinforced by different surface modified SiCp

Highlights: • The Ti-coated SiC{sub p} exhibited more uniformly distribution in composites than that of pre-oxidized SiC{sub p}. • Ti-coated SiC{sub p} obtained better SiC{sub p}-Al interface bonding than that of pre-oxidized SiC{sub p}. • The composites reinforced by Ti-coated SiC{sub p} exhibited better tensile properties than that reinforced by pre-oxidized SiC{sub p}. - Abstract: In this paper, the 4 vol% SiC{sub p}/Al-Cu-Mg-Si-Mn composites were prepared by method of stirring casting. The effects of SiC{sub p} surface modifications (oxidization and Ti-coating) and particle sizes (5 μm, 10 μm and 15 μm) on the microstructure and tensile properties of the composites were analyzed. The effects of SiC{sub p} sizes on the distribution of SiC{sub p} in the pre-oxidized SiC{sub p}/Al-Cu-Mg-Si-Mn composites were larger than those in Ti-coated SiC{sub p}/Al-Cu-Mg-Si-Mn composites. The Al-Cu-Mg-Si-Mn composites reinforced with Ti-coated SiC{sub p} exhibited more uniform SiC{sub p} distributions and higher tensile mechanical properties than those reinforced with the pre-oxidized SiC{sub p}. When the SiC{sub p} size was 15 μm, the Ti-coated SiC{sub p}/Al-Cu-Mg-Si-Mn composite showed the best yield strength (σ{sub 0.2}), ultimate tensile strength (σ{sub UTS}) and fracture strain (ε{sub f}) of 410 MPa, 548 MPa and 7.6% with the increase of 10.2%, 2.6% and 5.6% than that of reinforced by pre-oxidized SiC{sub p}. The more uniformly dispersed particles and better tensile properties of the Ti-coated SiC{sub p}/Al-Cu-Mg-Si-Mn composites could be attributed to the better wetting between Ti-coated SiC{sub p} and molten Al.

36 MATERIALS SCIENCE↗

{sup 75}As NMR study of the oriented pnictide superconducting compound NdFeAsO{sub 0.83}F{sub 0.17}

Magnetization and {sup 75}As nuclear magnetic resonance (NMR) measurements in the superconductor NdFeAsO{sub 0.83}F{sub 0.17} (T{sub C}~46 K) are performed in order to investigate the effect of the Nd 4f electrons in the superconducting property. The magnetization curve displays a Nd 4f moments generated Curie-Weiss signal in the field of 7 T. {sup 75}As NMR spectra in the oriented sample (H{sub 0}‖ab) are recorded at 7 T in the temperature range 10–300 K and temperature dependent {sup 75}As NMR shift, K{sub ab} has been obtained. The K{sub ab} curve shows a Curie-Weiss type contribution. The magnitude of hyperfine field, H{sub hf} (4.4 kOe/μ{sub B}) estimated from the K{sub ab} vs χ plot indicates a non-negligible RKKY-type interaction between localized Nd 4f moments mediated by itinerant Fe 3d electrons.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Intermetallic M--Sn.sub.5 (M=Fe, Cu, Co, Ni) compound and a method of synthesis thereof

Novel intermetallic materials are provided that are composed of tin and one or more additional metal(s) having a formula M.sub.(1-x)-Sn.sub.5, where -0.1.ltoreq.x.ltoreq.0.5, with 0.01.ltoreq.x.ltoreq.0.4 being more preferred and the second metallic element (M) is selected from iron (Fe), copper (Cu), cobalt (Co), nickel (Ni), and a combination of two or more of those metals. Due to low concentration of the second metallic element, the intermetallic compound affords an enhanced capacity applicable for electrochemical cells and may serve as an intermediate phase between Sn and MSn.sub.2. A method of synthesizing these intermetallic materials is also disclosed.

36 MATERIALS SCIENCE↗