Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Effect of indium concentration on electrochemical properties of electrode-electrolyte interface of CuIn{sub 1-x}Ga{sub x}Se{sub 2} prepared by electrodeposition

Highlights: • CIGS thin film was electrodeposited on a molybdenum (Mo) electrode from a non-pH buffered chloride-based electrolyte. • The electrodeposited time and the concentration of In{sup 3+} control the growth of CIGS thin film prepared in this electrodeposition system. • The kinetic of electrodeposition system was gradually dominated by the diffusion process with the electrodeposition time. - Abstract: In this study, the electrochemical impedance spectroscopy (EIS) technique was used to investigate the electrochemical behavior of the interface between the Mo electrode and the Cu-In-Ga-Se electrolyte. In this electrodeposition system, the main parameters include (1) various deposition times, and (2) the effect of In{sup 3+} concentration on the diffusion processes, electrical double layer, charge transfer resistance, and Warburg impedance. Experimental results revealed that the electrochemical kinetic behavior of CIGS thin film is strongly influenced by (1) the electrical double layer existing between the substrate, and (2) the electrolyte with different concentrations of In{sup 3+}. With an increase in the electrodeposition time, the kinetic behavior of this electrodeposition system was gradually dominated by the diffusion process rather than charge transfer process.

36 MATERIALS SCIENCE↗

Computational Study of Indium Oxide Photoelectrodes

Using a combination of first-principles molecular dynamics simulations and electronic structure calculations, we characterize the atomistic structure and vibrational properties of a photocatalytic surface of In 2 O 3 , a promising photoelectrode for the production of hydrogen peroxide. We then investigate the surface in contact with water and show that the electronic states of In 2 O 3 are appropriately positioned in energy to facilitate the two-electron water oxidation reaction (WOR) over the competing four-electron oxygen evolution reaction. In conclusion, we further propose that the use of strained thin films interfaced with water is beneficial in decreasing the optical gap of In 2 O 3 and thus in utilizing a wider portion of the solar spectrum for the WOR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of structural anisotropy on electronic conduction in delafossite tin doped copper indium oxide thin films

Sn doped CuInO{sub 2} thin films having a single delafossite phase have been synthesized by magnetron sputtering technique. A gradual decrease in the activation energy from 0.43 to about 0.10 eV and a large increase in conductivity are observed in Sn doped samples with increasing fraction of crystallites having (006) orientation due to an increase in substrate temperature. Due to thermally activated carrier transport along O-A-O layers and activated carrier generation along BO{sub 6} layers, crystallite orientation becomes a crucial factor in controlling the conduction in delafossite thin films.

36 MATERIALS SCIENCE↗

Compensation and carrier trapping in indium-doped CdTe: Contributions from an important near-mid-gap donor

We report on the recharging of the neutral state of a deep-donor layer that increases the efficiency of charge collection in detector-grade CdTe:In. Measurements with photoinduced current transient spectroscopy and thermoelectric effect spectroscopy revealed positively charged energy level at E{sub c}-0.65 eV. Photoluminescence measurements identified this level being responsible for the 0.68 eV emission band. Its positive charge is converted into a neutral one by the upward displacement of Fermi level. We discuss the nature of this deep defect based on the latest ab initio calculations.

47 OTHER INSTRUMENTATION↗

Comment on ''Generation of cold low divergent atomic beam of indium by laser ablation'' [Rev. Sci. Instrum. 76, 113302 (2005)]

We present measurements of the velocity distribution of calcium atoms in an atomic beam generated using a dual-stage laser back-ablation apparatus. Distributions are measured using a velocity selective Doppler time-of-flight technique. They are Boltzmann-like with rms velocities corresponding to temperatures above the melting point for calcium. Contrary to a recent report in the literature, this method does not generate a subthermal atomic beam.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Robust room temperature persistent photoconductivity in polycrystalline indium oxide films

We have investigated the effects of UV irradiation on the electrical and optical properties of polycrystalline In{sub 2}O{sub 3} films. We found that UV illumination at a peak wavelength of 365 nm leads to a sharp drop in resistance and increase in carrier concentration. This highly conductive state persists for a timescale of hours in air at room temperature after illumination. We observe distinct changes in the optical absorption spectra and the associated change in carrier concentration, which is consistent with a Burstein-Moss shift of {approx}0.1 eV. The relaxation rate of this persistent conducting state depends strongly on temperature. We find that the conductance relaxation in an oxygen-free environment can be described by a stretched exponential while the behavior of the samples in air is better described by a logarithmic relaxation, both of which may be associated with glassy behavior.

36 MATERIALS SCIENCE↗

The structure of the polar Sn-doped indium oxide (001) surface

Epitaxial Sn-doped In{sub 2}O{sub 3} (ITO) thin films were grown using oxygen plasma-assisted molecular beam epitaxy (MBE) on (001) oriented Yttria Stabilized Zirconia. Low-energy-electron-diffraction shows that ITO(001) surface is oxygen terminated and has a c(1x1)-structure with p4g symmetry. Atomically-resolved Scanning Tunneling Microscopy suggests that surface oxygen atoms undergo dimerization; possible adsorption sites are identified. The density of surface oxygen depends on the Sn concentration and it is suggested that both, dimerization and doping stabilize the polar ITO(001) surface.

36 MATERIALS SCIENCE↗

Insights on the influence of surface roughness on photovoltaic properties of state of the art copper indium gallium diselenide thin films solar cells

The influence of Cu(In,Ga)Se{sub 2} (CIGSe) surface roughness on the photovoltaic parameters of state of the art devices is reported, highlighting the importance of the roughness of the as-grown CIGSe absorbers on solar cell efficiencies. As-grown CIGSe surface is progressively smoothed using a chemical etch, and characterized by SEM, AFM, XPS, {mu}-Raman spectroscopy, x-ray diffraction (XRD), and reflectivity. The decrease of roughness has no marked influence on crystal structure and surface composition of the absorber. The main effect is that the total reflectivity of the CIGSe surface increases with decreasing roughness. The samples are processed into solar cells and characterized by current-voltage measurements. While the open circuit voltage (V{sub oc}) and fill factor remain constant, the short circuit current (J{sub sc}) decreases markedly with decreasing roughness, resulting in a reduction of the solar cell efficiency from 14% down to 11%, which exceeds the expected decrease from increased reflectivity. Quantum efficiency and reflectivity measurements on complete cells are performed to analyze those effects. The influence of surface roughness on the theorical effective space charge region and diffusion length is based on a simple theoretical model. This paper discusses the comparison of CIGSe solar cells with n-i-p structures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetron-sputter deposition of high-indium-content n-AlInN thin film on p-Si(001) substrate for photovoltaic applications

Al{sub 0.278}In{sub 0.722}N thin films have been grown on p-type Si(001) and c-plane sapphire substrates by employing radio-frequency magnetron-sputter deposition at elevated temperatures. High-resolution x-ray diffraction, as well as pole-figure measurements, reveals no phase separation of the thin films. The Al{sub 0.278}In{sub 0.722}N film grown on p-Si(001) substrate is a typical fiber-texture with AlInN(0001)//Si(001) while that on the c-sapphire exhibits the onset of epitaxy. Microscopic studies reveal that the growth is dominated by a columnar mechanism and the average columnar grain diameter is about 31.5 and 50.8 nm on p-Si(001) and c-sapphire substrates, respectively. Photoluminescence at room-temperature exhibits a strong emission peak at 1.875 eV, smaller than the optical absorption edge (2.102 eV) but larger than the theoretical bandgap energy (1.70 eV), which is attributable to the band-filling effect, as is supported by the high electron density of 4.5 Multiplication-Sign 10{sup 20} cm{sup -3}. The n-Al{sub 0.278}In{sub 0.722}N/p-Si(001) heterostructure is tested for solar cells and the results are discussed based on the I-V characteristics and their fittings.

36 MATERIALS SCIENCE↗

Auger recombination as the dominant recombination process in indium nitride at low temperatures during steady-state photoluminescence

Auger recombination in InN films grown by metal-organic chemical vapor deposition was studied by steady-state photoluminescence at different laser excitation powers and sample temperatures. It was dominant over radiative recombination and Shockley-Read-Hall recombination at low temperatures, contributing to the sub-linear relationship between the integrated photoluminescence intensity and laser excitation power. Auger recombination rates increased gradually with temperature with an activation energy of 10-17 meV, in good agreement with values from transient photoluminescence reported in literature. As the Auger recombination rates were independent of material quality, they may form an upper limit to the luminous efficiency of InN.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancement of lanthanide evaporation by complexation: Dysprosium tri-iodide mixed with indium iodide and thulium tri-iodide mixed with thallium iodide

The vapors in equilibrium with condensates of DyI{sub 3}, DyI{sub 3}/InI, TmI{sub 3}, and TmI{sub 3}/TlI were observed over the temperature range from 900 K to 1400 K using x-ray induced fluorescence. The total densities of each element (Dy, Tm, In, Tl, and I) in the vapor, summed over all atomic and molecular species, were determined. Dramatic enhancements in the total vapor densities of Dy and Tm were observed in the vapors over DyI{sub 3}/InI and TmI{sub 3}/TlI as compared to the vapors over pure DyI{sub 3} and pure TmI{sub 3}, respectively. An enhancement factor exceeding 10 was observed for Dy at T≈ 1020 K, decreasing to 0 at T≈ 1250 K. An enhancement factor exceeding 20 was observed for Tm at T≈ 1040 K, decreasing to 0 at T≈ 1300 K. Such enhancements are expected from the formation of the vapor-phase hetero-complexes DyInI{sub 4} and TmTlI{sub 4}. Numerical simulations of the thermo-chemical equilibrium suggest the importance of additional complexes in liquid phases. A description of the measurement technique is given. Improvements in the absolute calibration lead to an approximately 40% correction to previously reported preliminary results [J. J. Curry et al., Chem. Phys. Lett. 507, 52 (2011); Appl. Phys. Lett. 100, 083505 (2012)].

36 MATERIALS SCIENCE↗

Direct evidence for self-trapping of excitons by indium nanowires at In/Si(111) surface

We report on the real-space observation of self-trapped excitons using scanning tunneling microscope. Electrons of In nanowires transfer to the Si substrate, yielding charge-transfer excitons at In/Si interface. The strong coupling between excitons and lattice vibrations leads to the exciton localization at low carrier density and 80.0 K. Exciton condensation was observed at the proper carrier density and its microscopic origin is discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Investigation of thermal resistance and power consumption in Ga-doped indium oxide (In{sub 2}O{sub 3}) nanowire phase change random access memory

The resistance stability and thermal resistance of phase change memory devices using ∼40 nm diameter Ga-doped In{sub 2}O{sub 3} nanowires (Ga:In{sub 2}O{sub 3} NW) with different Ga-doping concentrations have been investigated. The estimated resistance stability (R(t)/R{sub 0} ratio) improves with higher Ga concentration and is dependent on annealing temperature. The extracted thermal resistance (R{sub th}) increases with higher Ga-concentration and thus the power consumption can be reduced by ∼90% for the 11.5% Ga:In{sub 2}O{sub 3} NW, compared to the 2.1% Ga:In{sub 2}O{sub 3} NW. The excellent characteristics of Ga-doped In{sub 2}O{sub 3} nanowire devices offer an avenue to develop low power and reliable phase change random access memory applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

In-situ scanning electron microscopy and atomic force microscopy Young's modulus determination of indium oxide microrods for micromechanical resonator applications

Electric field induced mechanical resonances of In{sub 2}O{sub 3} microrods are studied by in-situ measurements in the chamber of a scanning electron microscope. Young's moduli of rods with different cross-sectional shapes are calculated from the resonance frequency, and a range of values between 131 and 152 GPa are obtained. A quality factor of 1180–3780 is measured from the amplitude-frequency curves, revealing the suitability of In{sub 2}O{sub 3} microrods as micromechanical resonators. The Young's modulus, E, of one of the rods is also measured from the elastic response in the force-displacement curve recorded in an atomic force microscope. E values obtained by in-situ scanning electron microscopy and by atomic force microscopy are found to differ in about 8%. The results provide data on Young's modulus of In{sub 2}O{sub 3} and confirm the suitability of in-situ scanning electron microscopy mechanical resonance measurements to investigate the elastic behavior of semiconductor microrods.

36 MATERIALS SCIENCE↗

Fourier spectrum based extraction of an equivalent trap state density in indium gallium zinc oxide transistors

Segregating the dynamics of gate bias induced threshold voltage shift, and in particular, charge trapping in thin film transistors (TFTs) based on time constants provides insight into the different mechanisms underlying TFTs instability. In this Letter we develop a representation of the time constants and model the magnitude of charge trapped in the form of an equivalent density of created trap states. This representation is extracted from the Fourier spectrum of the dynamics of charge trapping. Using amorphous In-Ga-Zn-O TFTs as an example, the charge trapping was modeled within an energy range of ΔE{sub t}≈ 0.3 eV and with a density of state distribution as D{sub t}(E{sub t−j})=D{sub t0}exp(−ΔE{sub t}/kT)with D{sub t0} = 5.02 × 10{sup 11} cm{sup −2} eV{sup −1}. Such a model is useful for developing simulation tools for circuit design.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of quantum-confined Stark effect on optical properties within trench defects in InGaN quantum wells with different indium content

The trench defects in InGaN/GaN multiple quantum well structures are studied using confocal photoluminescence (PL) spectroscopy and atomic force microscopy. A strong blueshift (up to ∼280 meV) and an intensity increase (by up to a factor of 700) of the emission are demonstrated for regions enclosed by trench loops. The influence of the difference in the well width inside and outside the trench loops observed by transmission electron microscopy, the compositional pulling effect, the strain relaxation inside the loop, and corresponding reduction in the built-in field on the PL band peak position and intensity were estimated. The competition of these effects is mainly governed by the width of the quantum wells in the structure. It is shown that the PL band blueshift observed within the trench defect loops in the InGaN structures with wide quantum wells is mainly caused by the reduction in efficiency of the quantum-confined Stark effect due to strain relaxation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗