Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HYPERVELOCITY IMPACT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Method of Characteristics Calculations and Computer Code for Materials with Arbitrary Equations of State and Using Orthogonal Polynomial Least Square Surface Fits

A numerical scheme using the method of characteristics to calculate the flow properties and pressures behind decaying shock waves for materials under hypervelocity impact is developed. Time-consuming double interpolation subroutines are replaced by a technique based on orthogonal polynomial least square surface fits. Typical calculated results are given and compared with the double interpolation results. The complete computer program is included.

Chang, T. S.↗

Micrometeorites and solar flare particles in and out of the ecliptic

Using crystals grown into vugs from oriented lunar rocks as directional detectors of cosmic dust particles and solar flare nuclei, I have measured the angular distribution of the flux of micrometeoroids of mass 30 attograms to 80 femtograms. Hypervelocity impact craters of diameter 500 A to 10 microns and tracks from solar flare nuclei of energy 100 keV/amu to 20 MeV/amu were observed in crystals from rock 71055 facing lunar south and in crystals from rock 74255 facing lunar east. I have found that dust grains both in ecliptic orbits and in orbits inclined to the ecliptic have virtually identical mass-frequency distributions and similar shapes. I have evaluated the micrometeoroid fluxes after determining the exposure ages of the individual vug crystals by measuring the solar flare track density gradients in each crystal. The flux of particles of mass greater than 4 femtograms confined to the ecliptic is in good agreement with satellite measurements, suggesting that the micrometeoroid flux has been relatively constant over the past 35,000 yr. The flux of particles producing microcraters on a lunar surface facing south is lower than the ecliptic flux by a factor of about 7.

Hutcheon, I. D.↗

Magnetic effects of shock and their implications for lunar magnetism. II

Synthetic breccias were produced by hypervelocity impact of projectiles on basalt powders in order to study the magnetization acquired during shock lithification of soil. It was found that some of the lithified products record the field at the point where they land, while others carry the original primary remanence. Even those rocks recording the direction of the ambient field did not always faithfully record the intensity of the field. When rocks were exposed to shock, it was found that the magnetic hardness of a rock has a profound effect on its magnetic response. Shock effects are seen at shock levels of less than 10 kbar, which suggests that lunar samples may have been shock-demagnetized.

Cisowski, S. M.↗

A corundum-rich inclusion in the Murchison carbonaceous chondrite

Although thermodynamic calculations predict corundum to be the first condensate from a cooling gas of solar composition, a corundum-hibonite inclusion, BB-5, has for the first time been found in the Murchison carbonaceous chondrite. Ion microprobe measurements of Mg isotopic compositions yield the result, unexpected in such an early condensate, that Mg-26 excesses are small despite large Al-27/Mg-24 ratios. The extreme temperature required to melt this inclusion makes a liquid origin unlikely, except by the hypervelocity impact of refractory bodies. Alternatively, B-5 is a direct gas-solid condensate, and its uniform Mg-26 enrichment must be a characteristic of the reservoir from which it condensed. Nebular heterogeneity in magnesium isotopic composition is the preferred explanation for the formation of such a reservoir.

Bar-Matthews, M.↗

Computer code simulations of the formation of Meteor Crater, Arizona - Calculations MC-1 and MC-2

It has been widely accepted that hypervelocity impact processes play a major role in the evolution of the terrestrial planets and satellites. In connection with the development of quantitative methods for the description of impact cratering, it was found that the results provided by two-dimensional finite difference, computer codes is greatly improved when initial impact conditions can be defined and when the numerical results can be tested against field and laboratory data. In order to address this problem, a numerical code study of the formation of Meteor (Barringer) Crater, Arizona, has been undertaken. A description is presented of the major results from the first two code calculations, MC-1 and MC-2, that have been completed for Meteor Crater. Both calculations used an iron meteorite with a kinetic energy of 3.8 Megatons. Calculation MC-1 had an impact velocity of 25 km/sec and MC-2 had an impact velocity of 15 km/sec.

Roddy, D. J.↗

Accretionary dark rims in unequilibrated chondrites

Textural and qualitative EDX investigations of dark-rimmed particles in six low petrologic type chondrites indicate that the rims accreted on host particles over a wide range of temperatures prior to initial accumulation and lithification of the meteorites in which the rimmed particles are now contained. Many dark rims are enriched in moderately volatile trace elements such as Na, Cl, P, and K, relative to the host particles and matrix. The range of physical/chemical environments associated with hypervelocity impacts may have offered the setting for the formation of dark-rimmed particles early in solar system history.

King, T. V. V.↗

A review of micrometeoroid flux measurements and models for low orbital altitudes of the Space Station

A review of meteoroid flux measurements and models for low orbital altitudes of the Space Station has been made in order to provide information that may be useful in design studies and laboratory hypervelocity impact tests which simulate micrometeoroids in space for design of the main wall of the Space Station. This report deals with the meteoroid flux mass model, the defocusing and shielding factors that affect the model, the probability of meteoroid penetration of the main wall of a Space Station. Whipple (1947) suggested a meteoroid bumper, a thin shield around the spacecraft at some distance from the wall, as an effective device for reducing penetration, which has been discussed in this report. The equations of the probability of meteoroid penetration, the average annual cumulative total flux, and the equations for the thickness of the main wall and the bumper are presented in this report.

Susko, M.↗

Comet flyby sample return experiment

Dust from several comets can be returned to earth with minimum propulsion effort after a high-speed encounter. The collection concept involves the capture of individual dust particles by condensation in a cell after vaporization by a thin diaphragm. This collection concept has been validated in laboratory tests. To compensate for the slower laboratory velocities in a two-stage light-gas gun, higher-density metals (Zn and Cd) have been used for particles and diaphragms to simulate hypervelocity vaporization. Teflon has proved to be a suitable material for the collection cell; more than 50 percent of the vaporized projectile material has been recovered by chemical etching from such cells. Hypervelocity-impact parameters (such as diaphragm-to-projectile ratio, hole size, and plume angles) determined by tests permit the modification of existing analytical models. These new findings are necessary for flyby cometary experiments.

Tsou, P.↗

Manmade orbital debris studies at NASA Langley

In the past, flight experiments to define the meteoroid environment near the Earth and in interplanetary space were undertaken. The effectiveness of meteoroid bumpers was investigated. These flight experiments were aboard Pioneer 10, Pioneer 11, and Explorer 46. Hypervelocity impact tests were conducted in the laboratory to study protective structures and the composition of meteoroids from the hundreds of meteor spectra obtained. It was also found that manmade debris presented a similar hazard to spacecraft near the Earth. An assessment of that hazard is made in this paper. An analysis of the collision probability problem with much attention given to the population of small untrackable fragments created during explosions is presented.

Humes, D. H.↗

Modeling

A prediction of the future population of satellites, satellite fragments, and assorted spacecraft debris in Earth orbit can be reliably made only after three conditions are satisfied: (1) the size and spatial distributions of these Earth-orbiting objects are established at some present-day time; (2) the processes of orbital evolution, explosions, hypervelocity impact fragmentation, and atmospheric drag are understood; and (3) a reasonable traffic model for the future launch rate of Earth-orbiting objects is assumed. The theoretician will then take these three quantities as input data and will carry through the necessary mathematica and numerical analyses to project the present-day orbital population into the future.

Zook, H. A.↗

Particle erosion mechanisms and mass redistribution in Saturn's rings

A variety of physical processes can erode the surfaces of planetary ring particles. According to current estimates, the most efficient of these over the bulk of Saturn's rings is hypervelocity impact by 100 microns to one centimeter radius meteoroids. The atoms, molecules, and fragments ejected from ring particles by erosion arc across the rings along elliptical orbits to produce a tenuous halo of solid ejecta and an extensive gaseous atmosphere. Continuous exchange of ejecta between different ring regions can lead to net radial transport of mass and angular momentum. The equations governing this ballistic transport process are presented and discussed. Both numerical and analytic studies of idealized ring systems illustrate that ballistic transport can cause significant mass redistribution in the rings, especially near regions of high density contrast, such as the inner edges of the A and B rings. Ejecta exchanges can also alter local particle sizes and compositions and may produce pulverized regoliths at least several centimeters deep. The meteoroid erosion rate is so high that significant global torques and mass loss are possible on times shorter than a solar system life time.

Durisen, R. H.↗

Radar investigation of asteroids

The number of radar detected asteroids has climbed from 6 to 40 (27 mainbelt plus 13 near-Earth). The dual-circular-polarization radar sample now comprises more than 1% of the numbered asteroids. Radar results for mainbelt asteroids furnish the first available information on the nature of these objects at macroscopic scales. At least one object (2 Pallas) and probably many others are extraordinarily smooth at centimeter-to-meter scales but are extremely rough at some scale between several meters and many kilometers. Pallas has essentially no small-scale structure within the uppermost several meters of the regolith, but the rms slope of this regolith exceeds 20 deg., much larger than typical lunar values (approx. 7 deg.). The origin of these slopes could be the hypervelocity impact cratering process, whose manifestations are likely to be different on low-gravity, low-radius-of-curvature objects from those on the terrestrial planets. The range of mainbelt asteroid radar albedoes is very broad and implies big variations in regolith porosity or metal concentration, or both. The highest albedo estimate, for 16 Psyche, is consistent with a surface having porosities typical of lunar soil and a composition nearly completely metallic. Therefore, Psyche might be the collisionally stripped core of a differentiated small plant, and might resemble mineralogically the parent bodies of iron meteorites.

Ostro, S. J.↗

Size-velocity distribution of large ejecta fragments

The characteristics of three primary extraterrestrial craters and the associated craters were examined to generate a size-velocity distribution for large ejecta fragments. The lunar craters Copernicus and Aristillus and the Martian crater Dv on Olympus Mons were used. Attention was focused on the radial distances between the primary and secondary crater centers and the diameters of the secondaries. The primary craters selected are all relatively young, which avoided contamination of the data from secondaries from other primaries. Attempts were made to account for the speed of the hypervelocity impacts and the elemental compositions of the impactors. An apparent velocity cutoff of about 1 km/sec was observed for the secondaries, which implies that no meteoroid impacts can accelerate ejecta to escape velocities from the moon or Mars.

Vickery, A. M.↗

Space Station pressure wall repair techniques

Space Station components are susceptible to hypervelocity impact damage from orbital debris and meteoroids. An especially vulnerable and critical space station component is the module pressure wall. Even with shielding, sufficiently large impacting particles can create penetrations ranging from pinholes to large jagged holes. This paper describes pressure wall damage repair patches along with procedures and tools for performing the repair. One patch incorporates an aluminum foil protected from the jagged hole edge with a Kevlar or foam pad. An adhesive holds the patch in place. Another patch uses a stiff plate held away from the damaged area by a low durrometer rubber ring which also seals the plate edge. An adhesive will also secure this patch in place. Procedures were developed to prepare the punctured wall surface and apply the patch under weightless and unpressurized conditions. The procedures were tested in a laboratory and in the MSFC Neutral Buoyancy Simulator with models of the patches and tools.

Gibbins, Martin N.↗

Micrometeoroids and debris

The materials with vulnerability to micrometeoroids and space debris are discussed. It is concluded that all materials are vulnerable to hypervelocity impacts and that the importance of these impacts depends on the function of material. It is also concluded that low earth orbits are the most significant region relative to orbital debris. The consequences of aerospace environment effects are discussed.

Potter, Andrew↗

Orbital debris research at NASA Johnson Space Center, 1986-1988

Research on orbital debris has intensified in recent years as the number of debris objects in orbit has grown. The population of small debris has now reached the level that orbital debris has become an important design factor for the Space Station. The most active center of research in this field has been the NASA Lyndon B. Johnson Space Center. Work is being done on the measurement of orbital debris, development of models of the debris population, and development of improved shielding against hypervelocity impacts. Significant advances have been made in these areas. The purpose of this document is to summarize these results and provide references for further study.

Reynolds, Robert C.↗

Orbital debris from upper-stage breakup

The present conference on the effects of launch vehicle upper-stage breakup on the orbital debris scenario discusses an analysis of the SPOT 1 Ariane third stage, the explosive fragmentation of orbiting propellant tanks, albedo estimates for debris, Ariane-related debris in deep-space orbit, and the relationship of hypervelocity impacts to upper-stage breakups. Also discussed are the prospects for and the economics of the future removal of orbital debris, collision probabilities in GEO, current operational practices for Delta second stage breakup prevention, breakup-precluding modifications to the Ariane third stage, and the safing of the H-1 second stage after spacecraft separation.

Loftus, Joseph P., Jr.↗

Current orbital debris environment

NASA has instituted a plan for the definition of activities and resources required over the coming decade for the deepening of current understanding of anthropogenic orbital debris, and its effects on future mission operations. This understanding will be the basis of policy definition and policy implementation efforts. The most immediate requirement is the definition of the debris environment, with emphasis on data for debris sizes smaller than 4 cm. Systems-damage criteria and hypervelocity-impact theory will then be used to define the hazard to specific spacecraft.

Kessler, Donald J.↗