Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HOMOGENIZATION METHODS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Autoregressive harmonic analysis of the earth's polar motion using homogeneous International Latitude Service data

The homogeneous set of 80-year-long (1900-1979) International Latitude Service (ILS) polar motion data is analyzed using the autoregressive method (Chao and Gilbert, 1980), which resolves and produces estimates for the complex frequency (or frequency and Q) and complex amplitude (or amplitude and phase) of each harmonic component in the data. The ILS data support the multiple-component hypothesis of the Chandler wobble. It is found that the Chandler wobble can be adequately modeled as a linear combination of four (coherent) harmonic components, each of which represents a steady, nearly circular, prograde motion. The four-component Chandler wobble model 'explains' the apparent phase reversal during 1920-1940 and the pre-1950 empirical period-amplitude relation. The annual wobble is shown to be rather stationary over the years both in amplitude and in phase, and no evidence is found to support the large variations reported by earlier investigations. The Markowitz wobble is found to be marginally retrograde and appears to have a complicated behavior which cannot be resolved because of the shortness of the data set.

Chao, B. F.↗
NASA NTRS1984

A numerical method for interface problems in elastodynamics

The numerical implementation of a formulation for a class of interface problems in elastodynamics is discussed. This formulation combines the use of the finite element and boundary integral methods to represent the interior and the exteriro regions, respectively. In particular, the response of a semicylindrical alluvial valley in a homogeneous halfspace to incident antiplane SH waves is considered to determine the accuracy and convergence of the numerical procedure. Numerical results are obtained from several combinations of the incidence angle, frequency of excitation, and relative stiffness between the inclusion and the surrounding halfspace. The results tend to confirm the theoretical estimates that the convergence is of the order H(2) for the piecewise linear elements used. It was also observed that the accuracy descreases as the frequency of excitation increases or as the relative stiffness of the inclusion decreases.

Mcghee, D. S.↗
NASA NTRS2011

Effect of Boundary Conditions on the Axial Compression Buckling of Homogeneous Orthotropic Composite Cylinders in the Long Column Range

Buckling loads for long isotropic and laminated cylinders are calculated based on Euler, Fluegge and Donnell's equations. Results from these methods are presented using simple parameters useful for fundamental design work. Buckling loads for two types of simply supported boundary conditions are calculated using finite element methods for comparison to select cases of the closed form solution. Results indicate that relying on Donnell theory can result in an over-prediction of buckling loads by as much as 40% in isotropic materials.

Mikulas, Martin M., Jr.↗
NASA NTRS2010

Comprehensive T-Matrix Reference Database: A 2007-2009 Update

The T-matrix method is among the most versatile, efficient, and widely used theoretical techniques for the numerically exact computation of electromagnetic scattering by homogeneous and composite particles, clusters of particles, discrete random media, and particles in the vicinity of an interface separating two half-spaces with different refractive indices. This paper presents an update to the comprehensive database of T-matrix publications compiled by us previously and includes the publications that appeared since 2007. It also lists several earlier publications not included in the original database.

Mishchenko, Michael I.↗
NASA NTRSDate not supplied

Harnessing CPF Hyperspectral Radiances to Homogenize Earth Observing Systems

Homogenization across Earth observing systems is essential for ensuring consistency in geophysical retrievals over time and enabling the construction of long-term climate records. As the first SI Traceable Satellite (SITSat) for the reflected solar, the CLARREO Pathfinder (CPF) will provide high-accuracy spectrally resolved benchmark measurements of Earth-reflected solar radiation, serving as a standardized in-orbit reference for other reflected solar (RS) instruments. The CPF intercalibration team has developed a state-of-the-art method to intercalibrate the RS channels of the VIIRS instrument onboard the NOAA-20 satellite using CPF benchmark measurements, aiming for a methodology uncertainty of 0.3-0.6% (1-sigma). To achieve this stringent accuracy, the CPF team has devised strategies to mitigate the effects of spatial, spectral, polarization, and angular disparities between the intercalibration footprints of CPF and VIIRS. Despite nearly identical instrument designs, the three VIIRS instruments currently in operation onboard SNPP, NOAA-20, and NOAA-21 platforms exhibit systematic radiometric biases up to 8%. Although each VIIRS sensor’s calibration is independent and traceable to standards maintained by NIST, there is significant concern within the community about which VIIRS sensor most accurately represents the absolute radiometric scale. The precise intercalibration between CPF and NOAA-20 VIIRS will reveal the absolute radiometric accuracy of VIIRS. This accuracy can then be extended to other RS sensors, including MODIS and other VIIRS sensors, via vicarious methods. The 3-nm spectral sampling of CPF measurements will enable users to quantify scene-dependent spectral biases between sensors, thereby aiding in establishing both spectral and radiometric homogenization across these platforms. The CPF mission overview, along with details of its intercalibration capabilities and homogenization approaches, will be discussed at the meeting.

Raj Bhatt↗
DOE OSTI2025

Polarization rotation in a ferroelectric BaTiO 3 film through low-energy He-implantation

Domain engineering in ferroelectric thin films is crucial for next-generation microelectronic and photonic technologies. Here, a method is demonstrated to precisely control domain configurations in BaTiO 3 thin films through low-energy He ion implantation. The approach transforms a mixed ferroelectric domain state with significant in-plane polarization into a uniform out-of-plane tetragonal phase by selectively modifying the strain state in the film’s top region. This structural transition significantly improves domain homogeneity and reduces polarization imprint, leading to symmetric ferroelectric switching characteristics. The demonstrated ability to manipulate ferroelectric domains post-growth enables tailored functional properties without compromising the coherently strained bottom interface. The method’s compatibility with semiconductor processing and ability to selectively modify specific regions make it particularly promising for practical implementation in integrated devices. This work establishes a versatile approach for strain-mediated domain engineering that could be extended to a wide range of ferroelectric systems, providing new opportunities for memory, sensing, and photonic applications where precise control of polarization states is essential.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Polarization rotation in a ferroelectric BaTiO$_3$ film through low-energy He-implantation

Domain engineering in ferroelectric thin films is crucial for next-generation microelectronic and photonic technologies. Here, a method is demonstrated to precisely control domain configurations in BaTiO$_3$ thin films through low-energy He ion implantation. The approach transforms a mixed ferroelectric domain state with significant in-plane polarization into a uniform out-of-plane tetragonal phase by selectively modifying the strain state in the film's top region. This structural transition significantly improves domain homogeneity and reduces polarization imprint, leading to symmetric ferroelectric switching characteristics. The demonstrated ability to manipulate ferroelectric domains post-growth enables tailored functional properties without compromising the coherently strained bottom interface. The method's compatibility with semiconductor processing and ability to selectively modify specific regions make it particularly promising for practical implementation in integrated devices. This work establishes a versatile approach for strain-mediated domain engineering that could be extended to a wide range of ferroelectric systems, providing new opportunities for memory, sensing, and photonic applications where precise control of polarization states is essential.

Luo, Liang [Ames Laboratory (AMES), Ames, IA (Unit↗
DOE OSTI2020

DFT Plus DMFT Study of Spin-Charge-Lattice Coupling in Covalnt LaCoO{siub 3}.

We study energetics and the nature of both homogeneous and mixed spin (MS) states in LaCoO3 incorporating structural changes of the crystal volume expansion and the Co-O bond disproportionation (BD) during the spin-state transition using the density functional theory plus dynamical mean field theory (DFT + DMFT) method. DFT + DMFT predicts that energetics of both excited spin states are almost the same while DFT + U calculations of the same structures energetically favor the MS states and produce various metastable solutions whose energetics depend sensitively on final spin states. Within DFT + DMFT, the homogeneous spin state in the expanded crystal volume shows the multiconfigurational nature with non-negligible occupancy probabilities of both high spin (HS) and low spin (LS) states along with d(6) and d(7) charge configurations indicating the dynamically fluctuating nature of spin and charge states due to the Co-O covalency. The nature of the MS state under the BD structure reveals that Co sites with the long Co-O bonds develop a Mott insulating state and favor HS with a d(6) configuration, while more covalent Co sites with the short Co-O bonds occupy more LS states with a d(7) configuration and behave as a band insulator, as a result, charge ordering is induced in the BD structure from the spin-state ordering. We also find that both energetics and electronic structure sensitively depend on the Co-O covalency effect, which can be tuned by changing the double counting potential and the resulting d occupancy (N-d), and N-d close to 6.7 is consistent with the nature of the spin-state transition. Our results show that structural changes during the spin-state transition can play an important role in understanding energetics and electronic structure of LaCoO3.

Park, Hyowon↗
NASA NTRS1994

Radiative Heat Transfer in Finite Cylindrical Enclosures with Nonhomogeneous Participating Media

Results of a numerical solution for radiative heat transfer in homogeneous and nonhomogeneous participating media are presented. The geometry of interest is a finite axisymmetric cylindrical enclosure. The integral formulation for radiative transport is solved by the YIX method. A three-dimensional solution scheme is applied to two-dimensional axisymmetric geometry to simplify kernel calculations and to avoid difficulties associated with treating boundary conditions. As part of the effort to improve modeling capabilities for turbulent jet diffusion flames, predicted distributions for flame temperature and soot volume fraction are used to calculate radiative heat transfer from soot particles in such flames. It is shown that the nonhomogeneity of radiative property has very significant effects. The peak value of the divergence of radiative heat flux could be underestimated by 2 factor of 7 if a mean homogeneous radiative property is used. Since recent studies have shown that scattering by soot agglomerates is significant in flames, the effect of magnitude of scattering is also investigated and found to be nonnegligible.

Hsu, Pei-Feng↗
DOE OSTI2023

Heterogenization of Homogeneous Ruthenium(II) Catalysts for Carbon-Neutral Dehydrogenation of Polyalcohols

Liquid organic hydrogen carrier (LOHC) systems are an excellent alternative to pressurized gas and liquid hydrogen storage technologies due to their high volumetric storage capacities and straightforward adaptation to existing infrastructure. Homogeneous catalysts are promising for the selective and reversible release of hydrogen from LOHC. However, separation from product mixtures and recycling inhibit their use, particularly when comprised of costly low-abundance elements, motivating the development of heterogeneous versions that are more easily recovered and reused. Here, we describe two methods for the heterogenization of molecular Ru catalysts that efficiently dehydrogenate the polyalcohol LOHCs ethylene glycol (EG) and 1,2-propanediol (1,2-PDO). The heterogeneous versions of these catalysts maintain catalytic activity for hydrogen production comparable to the homogeneous complexes, with up to 81% conversion and 99% selectivity. Further, DFT modeling indicates mechanistic similarities for the dehydrogenations of EG and 1,2-PDO, with the rate-limiting steps associated with protonation of the Ru–H bond to form H 2 and the alkoxide species coordinated to Ru(II), followed by β-hydride elimination to regenerate the Ru–H bond. Overall, the data suggest these heterogenized molecular catalysts have potential for practical use in polyalcohol-based LOHC systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Utilization of Novel (KNbO 3 ) 1− x (Ba 2 FeNbO 6 ) x ( x = 0.1, 0.2, 0.3) Solid Solutions for Efficient Photo‐Assisted Fenton Degradation of Methylene Blue Dye

Novel (KNbO 3 ) 1− x (Ba 2 FeNbO 6 ) x ( x = 0.1, 0.2, 0.3) solid solutions corresponding to K 0.82 Ba 0.18 Fe 0.09 Nb 0.91 O 3 , K 0.64 Ba 0.36 Fe 0.18 Nb 0.82 O 3 , and K 0.46 Ba 0.54 Fe 0.27 Nb 0.73 O 3 compounds have been synthesized via molten salt method. X‐ray diffraction confirms the formation of solid solutions, while transmission electron microscopy combined with energy‐dispersive spectroscopy results demonstrates a homogeneous distribution of elements. The obtained solid solutions crystallized in a cubic crystal structure, whereas the parent KNbO 3 possesses an orthorhombic structure. The wide bandgap semiconductor KNbO 3 transformed into a visible‐light‐active material, with its bandgap energy reduced from 3.56 eV to ≈2.4 eV. The substitution of K in KNbO 3 with Ba is responsible for structural modification from orthorhombic to cubic symmetry, whereas both structural modification and the substitution of Nb with Fe correlated with optical properties. The photocatalytic activities of all obtained solid solutions are improved compared with the parent KNbO 3 and Ba 2 FeNbO 6 compounds for photocatalytic degradation of methylene blue (MB) dye. Among the series of solid solutions, K 0.82 Ba 0.18 Fe 0.09 Nb 0.91 O 3 photocatalysts show the highest MB removal efficiency owing to its relatively higher surface area, suppressed charge carrier recombination, and more negative conduction band edge. Moreover, K 0.82 Ba 0.18 Fe 0.09 Nb 0.91 O 3 photocatalyst (0.1 g) combined with hydrogen peroxide (H 2 O 2 ) to form a novel photo‐Fenton system, achieving almost complete degradation of 100 mL of 10 mg L −1 MB dye in 30 min.

Avcıoğlu, Celal [Technische Universität Berlin, Fa↗
DOE OSTI2026

Quantum dynamics of cosmological particle production: interacting quantum field theories with matrix product states

Understanding real-time dynamics of interacting quantum fields in curved space-time remains a major theoretical challenge. We employ tensor network methods to study such dynamics using interacting scalar and gauge theories in 1+1 spacetime dimensions, subject to a quench modeling a homogeneously expanding gravitational background. The models considered are the scalar λϕ 4 theory and the Schwinger model, i.e. a Dirac fermion coupled to a U(1) gauge field which is equivalent via bosonization to a scalar field with a cosine self-interaction. In the free scalar limit, both theories reproduce known analytical results, providing a nontrivial numerical validation of bosonization in curved spacetime for the Schwinger model. Our central finding is that self-interactions lead to a suppression of gravitational particle production compared to the free-field case, as evidenced by two-point functions and the spectra of produced particles. We further examine the behavior of entanglement generation and find that interactions suppress entanglement growth in the λϕ 4 theory, while in the Schwinger model, the interplay between suppressed particle production and enhanced inter-particle correlations leads to more complex entanglement behavior. Our results pave the way for further explorations of nonperturbative quantum real-time dynamics of interacting scalar and gauge theories in arbitrary gravitational backgrounds.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1975

Propagation of transients in a random medium

The propagation of transient scalar waves in a three-dimensional random medium is considered. The analysis is based on the smoothing method. An integro-differential equation for the coherent (or average) wave is derived and solved for the case of a statistically homogeneous and isotropic medium and a delta-function source. This yields the coherent Green's function of the medium. It is found that the waveform of the coherent wave depends generally on the distance from the source measured in terms of a certain dimensionless parameter. Based on the magnitude of this parameter, three propagation zones, called the near zone, the far zone, and the intermediate zone, are defined.

Wenzel, A. R.↗
NASA NTRS1984

Fines in fluidized bed silane pyrolysis

Silicon deposition on silicon seed particles by silane pyrolysis in a fluidized-bed reactor is investigated as a low-cost, high-throughput method to produce high-purity polysilicon for solar-cell applications. Studies of fines, particles 0.1-10 microns diam, initiated from homogeneous decomposition in the reactor were conducted using 2 and 6-in-diam fluidized beds. The studies show functional dependences of fines elutriation on silane feed concentration, temperature, gas velocity, and bubble size. The observation that the fines elutriation is generally below 10 percent of the silicon-in-silane feed is attributed to scavenging by large particles in an environment of less free space for homogeneous nucleation. Preliminary results suggest that, with proper conditions and distributor design, high-silane-concentration (over 50 percent SiH4 in H2) feed may be used.

Hsu, G.↗
NASA NTRS2016

Improving Human/Autonomous System Teaming Through Linguistic Analysis

An area of increasing interest for the next generation of aircraft is autonomy and the integration of increasingly autonomous systems into the national airspace. Such integration requires humans to work closely with autonomous systems, forming human and autonomous agent teams. The intention behind such teaming is that a team composed of both humans and autonomous agents will operate better than homogenous teams. Procedures exist for licensing pilots to operate in the national airspace system and current work is being done to define methods for validating the function of autonomous systems, however there is no method in place for assessing the interaction of these two disparate systems. Moreover, currently these systems are operated primarily by subject matter experts, limiting their use and the benefits of such teams. Providing additional information about the ongoing mission to the operator can lead to increased usability and allow for operation by non-experts. Linguistic analysis of the context of verbal communication provides insight into the intended meaning of commonly heard phrases such as "What's it doing now?" Analyzing the semantic sphere surrounding these common phrases enables the prediction of the operator's intent and allows the interface to supply the operator's desired information.

Meszaros, Erica L.↗
DOE OSTI2022

Topology optimization for the design of porous electrodes

Porous electrodes are an integral part of many electrochemical devices since they have high porosity to maximize electrochemical transport and high surface area to maximize activity. Traditional porous electrode materials are typically homogeneous, stochastic collections of small-scale particles and offer few opportunities to engineer higher performance. Fortunately, recent breakthroughs in advanced and additive manufacturing are yielding new methods to structure and pattern porous electrodes across length scales. These architected electrodes are emerging as a promising new technology to continue to drive improvement; however, it is still unclear which structures to employ and few tools are available to guide their design. Here we address this gap by applying topology optimization to the design of porous electrodes. We demonstrate our framework on two applications: a porous electrode driving a steady Faradaic reaction and a transiently operated electrode in a supercapacitor. We present computationally designed electrodes that minimize energy losses in a half-cell. For low-conductivity materials, the optimization algorithm creates electrode designs with a hierarchy of length scales. Further, the designed electrodes are found to outperform undesigned, homogeneous electrodes. Finally, we present three-dimensional porous electrode designs. We thus establish a topology optimization framework for designing porous electrodes.

25 ENERGY STORAGE↗
DOE OSTI2020

Adaptive Multirate Mass Transfer (aMMT) Model: A New Approach to Upscale Regional‐Scale Transport Under Transient Flow Conditions

Abstract The long‐term evaluation of regional‐scale groundwater quality needs efficient upscaling methods for transient flow. Upscaling techniques, such as the Multirate Mass Transfer (MRMT) method with constant upscaling parameters, have been used for transport with steady‐state flow, yet the upscaling parameters (i.e., rate coefficients) may be time dependent. This study proposed and validated an adaptive MRMT (aMMT) method by allowing the mass transfer coefficients in MRMT to change with the flow field. Advective‐dispersive contaminant transport simulated in a 3‐D heterogeneous medium was used as a reference solution. Equivalent transport under homogeneous flow conditions was evaluated by applying the MRMT and aMMT models for upscaling. The relationship between mass transfer coefficients and flow rates was fitted under steady‐state flow driven by various hydraulic gradients. A power law relationship was obtained, which was then used to update the mass transfer coefficients in each stress period under transient flow conditions in the aMMT method. Results indicated that for advection‐dominated transport, both the MRMT and aMMT methods can upscale the anomalous transport dynamics affected by subgrid heterogeneity under transient flow conditions. Whereas for diffusion‐dominated systems, the MRMT model failed to capture the tails of tracer breakthrough curves after the boundary condition changed, but the results from the aMMT model were significantly improved. However, if the overall flow direction changed, both MRMT and aMMT failed to represent the breakthrough curve tail generated by the heterogeneous system. The results point toward a promising path for upscaling transport in complex aquifers with transient flow.

Guo, Zhilin↗