Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HOLE MOBILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Copper Vacancies and Heavy Holes in the Two-Dimensional Semiconductor KCu 3– x Se 2

The two-dimensional material KCu 3–x Se 2 was synthesized using both a K 2 Se 3 flux and directly from the elements. It crystallizes in the CsAg 3 S 2 structure (monoclinic space group C2/m with a = 15.417(3) Å, b = 4.0742(8) Å, c = 8.3190(17) Å, and β = 112.94(3)°), and single-crystal refinement revealed infinite copper-deficient [Cu 3–x Se 2 ]– layers separated by K + ions. Thermal analysis indicated that KCu 3–x Se 2 melts congruently at ~755 °C. UV–vis spectroscopy showed an optical band gap of ~1.35 eV that is direct in nature, as confirmed by electronic structure calculations. Electronic transport measurements on single crystals yielded an in-plane resistivity of ~6 × 10 –1 Ω cm at 300 K that has a complex temperature dependence. The results of Seebeck coefficient measurements were consistent with a doped p-type semiconductor (S = +214 μV K –1 at 300 K), with doping being attributed to copper vacancies. Transport is dominated by low-mobility (on the order of 1 cm 2 V –1 s –1 ) holes caused by relatively flat valence bands with substantial Cu 3d character and a significant concentration of Cu ion vacancy defects (p ~ 10 19 cm –3 ) in this material. In conclusion, electronic band structure calculations showed that electrons should be significantly more mobile in this structure type.

36 MATERIALS SCIENCE↗

Improved thermoelectric performance of α- and β- Cu 2 Se through suppression of hole density using extrinsic copper vacancies

Modulating Cu + ion disorder in Cu 2 Se can enable control over the polymorphism and the carrier density leading to enhanced thermoelectric properties for both α- and β-Cu 2 Se. Here we report that the incorporation of Cr 3+ into the Cu 2 Se crystal lattice facilitates the stabilization of α-Cu 2 Se at 300 K leading to a large (~140%) reduction in the carrier density both below and above the phase transition. This is attributed to the reduction in the density of intrinsic copper interstitials (Cu$^{•}_{i}$) within the Cu (2-δ-λ) (Cr$^{··}_{Cu}$)λ(V$^{'}_{Cu}$)δ(Cu$^{π}_{i}$) δ-2λ (h • ) δ-2λ Se crystal lattice. Such optimization of the carrier density led to a large (63%) increase in the thermopower and a drastic (46%) reduction in the total thermal conductivity for both α- and β-Cu 2 Se matrices. Consequently, a significant enhancement of the thermoelectric performance is observed in the entire temperature range from 300 K to 773 K. This results in high average ZT values for both α-Cu 2 Se (ZT ave = 0.60) and β-Cu 2 Se (ZT ave = 0.97), which paves the way for both near room temperature and high temperatures applications. Furthermore, this work provides a new approach to optimize the thermoelectric performance of Cu 2 Se-based materials by leveraging the interaction between mobile intrinsic Cu$^{·}_{i}$ and extrinsic V$^{'}_{Cu}$ to suppress the hole density.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mg dopant in Cu{sub 2}SnSe{sub 3}: An n-type former and a promoter of electrical mobility up to 387 cm{sup 2} V{sup −1} s{sup −1}

Mg-doped Cu{sub 2}SnSe{sub 3} bulk materials with the (Cu{sub 2−x}Mg{sub x})SnSe{sub 3} (Mg-x-CTSe) formula at x=0, 0.05, 0.1, 0.15, and 0.2 were prepared at 550 °C for 2 h with soluble sintering aids of Sb{sub 2}S{sub 3} and Te. Defect chemistry was studied by measuring structural and electrical properties of Mg-doped Cu{sub 2}SnSe{sub 3} as a function of dopant concentration. Mg-x-CTSe pellets show p-type at x=0, 0.05 and 0.1 and n-type at x=0.15 and 0.2. The low hole concentration of 3.2×10{sup 17} cm{sup −3} and high mobility of 387 cm{sup 2} V{sup −1} s{sup −1} were obtained for (Cu{sub 2−x}Mg{sub x})SnSe{sub 3} bulks at x=0.1 (5% Mg) as compared to 2.2×10{sup 18} cm{sup −3} and 91 cm{sup 2} V{sup −1} s{sup −1} for the undoped one. The explanation based upon the Mg-to-Cu antisite donor defect for the changes in electrical property was declared. A high Mg content for Mg-x-CTSe at x≥0.1 can lead to the formation of second phases. The study in bulk Mg-x-CTSe has been based upon defect states and is consistent and supported by the data of structural and electrical properties. - Graphical abstract: The effects of extrinsic doping of Mg{sup 2+} on the electrical properties of Cu{sub 2}SnSe{sub 3} bulks. - Highlights: • p-Type Mg-CTSe with n{sub p} of 3.2×10{sup 17} cm{sup −3} and μ{sub p} of 387 cm{sup 2} V{sup −1} s{sup −1} was obtained. • This p-type occurred for 5%Mg-doped CTSe with the (Cu{sub 1.9}Mg{sub 0.1})SnSe{sub 3} formula. • Mg dopant acts as a donor to lower n{sub p} and an accelerator to increase mobility. • High Mg content leads to the p-to-n transitions. • Defect was explored by measuring electrical property and lattice parameter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the electrically detected cyclotron resonance of holes in silicon nanostructures

The cyclotron resonance in semiconductor nanostructures is electrically detected for the first time without an external cavity, a source, and a detector of microwave radiation. An ultranarrow p-Si quantum well on an n-Si (100) surface confined by superconducting heavily boron-doped {delta}-shaped barriers is used as the object of investigation and provides microwave generation within the framework of the nonstationary Josephson effect. The cyclotron resonance is detected upon the presence of a microcavity, which is incorporated into the quantum-well plane, by measuring the longitudinal magnetoresistance under conditions of stabilization of the source-drain current. The cyclotron-resonance spectra and their angular dependences measured in a low magnetic field identify small values of the effective mass of light and heavy holes in various 2D subbands due to the presence of edge channels with a high mobility of carriers.

36 MATERIALS SCIENCE↗

Many-Body Exciton and Intervalley Correlations in Heavily Electron-Doped WSe 2 Monolayers

We shoe that in monolayer transition-metal dichalcogenide semiconductors, many-body correlations can manifest in optical spectra when electron-hole pairs (excitons) are photoexcited into a 2D Fermi sea of mobile carriers. At low carrier densities, the formation of charged excitons (X ± ) is well documented. However, in WSe 2 monolayers, an additional absorption resonance, often called X -' , emerges at high electron density. Its origin is not understood. Here, we investigate the X -' state via polarized absorption spectroscopy of gated WSe 2 monolayers in magnetic fields to 60T. Field-induced filling and emptying of the lowest optically active Landau level in the K ' valley causes repeated quenching of the corresponding optical absorption. Surprisingly, these quenchings are accompanied by absorption changes to higher Landau levels in both K ' and K valleys, which are unoccupied. These results cannot be reconciled within a single-particle picture, and demonstrate the many-body nature and intervalley correlations of the X -' quasiparticle state.

2D materials↗

Packing Structure of Poly(3-hexylthiophene) Crystal: Ab Initio and Molecular Dynamics Studies

We present a theoretical study of the stacking properties of poly(3-hexylthiophene) (P3HT) and its effect on the electronic and transport properties. Our study is based on ab initio density functional calculations including van der Waals interactions and molecular dynamics simulations. Our calculations provide detailed information of the atomic structures and the formation mechanisms of the particular stacking structures. We found the most stable stacking structure produces a relatively small hole effective mass in the stacking direction, which allows large interchain mobility.

Chemistry↗

Carrier properties of Bi(111) grown on mica and Si(111)

A comparison is presented between properties of Bi(111) films grown by Stranski-Krastanov epitaxy on Si(111) 7 × 7 and by van der Waals epitaxy on mica substrates. Thin film morphologies and electronic transport properties of Bi(111) films of variable thickness are investigated for each growth method. Atomic force micrographs for Bi(111) films on mica reveal clearly defined triangular regions consisting of layered steps with height 0.4 nm, corresponding to the Bi(111) bilayer height. Variable-temperature electronic transport measurements show the existence of a quantum confinement-induced energy gap in the film interiors, resulting in a semimetal-to-semiconductor transition. Magnetotransport analysis in a three-carrier model including metallic electrons in surface states and electrons and holes in the films' interiors provides a detailed study of densities, mobilities, and mean-free paths of the three carrier types. Further, improved electronic transport properties are found in Bi(111) films of higher thickness on mica compared to on Si(111), a likely result of the largely strain-free van der Waals epitaxial growth.

36 MATERIALS SCIENCE↗

Ab initio prediction of fast non-equilibrium transport of nascent polarons in SrI 2 : a key to high-performance scintillation [First-principles study of hole polaron formation and migration in strontium iodide]

The excellent light yield proportionality of europium-doped strontium iodide (SrI 2 :Eu) has resulted in state-of-the-art γ-ray detectors with remarkably high-energy resolution, far exceeding that of most halide compounds. In this class of materials, the formation of self-trapped hole polarons is very common. However, polaron formation is usually expected to limit carrier mobilities and has been associated with poor scintillator light-yield proportionality and resolution. Here using a recently developed first-principles method, we perform an unprecedented study of polaron transport in SrI 2 , both for equilibrium polarons, as well as nascent polarons immediately following a self-trapping event. We propose a rationale for the unexpected high-energy resolution of SrI 2 . We identify nine stable hole polaron configurations, which consist of dimerised iodine pairs with polaron-binding energies of up to 0.5 eV. They are connected by a complex potential energy landscape that comprises 66 unique nearest-neighbour migration paths. Ab initio molecular dynamics simulations reveal that a large fraction of polarons is born into configurations that migrate practically barrier free at room temperature. Consequently, carriers created during γ-irradiation can quickly diffuse away reducing the chance for nonlinear recombination, the primary culprit for non-proportionality and resolution reduction. We conclude that the flat, albeit complex, landscape for polaron migration in SrI 2 is a key for understanding its outstanding performance. This insight provides important guidance not only for the future development of high-performance scintillators but also of other materials, for which large polaron mobilities are crucial such as batteries and solid-state ionic conductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Halide Ion Migration in Perovskite Nanocrystals and Nanostructures

The optical and electronic properties of metal halide perovskites provide insight into the operation of solar cells as well as their long-term operational stability. Halide mobility in perovskite films is an important factor influencing solar cell performance. One can visualize halide ion migration through halide exchange between two nanocrystal suspensions or between physically paired films of two different metal halide perovskites. The ability to tune band gap by varying halide ratios (Cl:Br or Br:I) allows the synthesis of mixed halide perovskites with tailored absorption and emission across the entire visible spectrum. Interestingly, mixed halide (e.g., MAPb(Br 0.5 I 0.5 ) 3 ) films undergo phase segregation to form Br-rich and I-rich sites under steady state illumination. Upon halting illumination, segregated phases mix to restore original mixed halide compositions. Introducing multiple cations (Cs, formamidinium) at the A site or alloying with Cl greatly suppresses halide mobilities. Long-term irradiation of MAPb(Br 0.5 I 0.5 ) 3 films also cause expulsion of iodide leaving behind Br-rich phases. Hole trapping at I-rich sites in MAPb(Br 0.5 I 0.5 ) 3 is considered to be an important step in inducing halide mobility in photoirradiated films. Finally, this Account focuses on halide ion migration in nanocrystals and nanostructured films driven by entropy of mixing in dark and phase segregation under light irradiation.

14 SOLAR ENERGY↗

Electronic Structure and Electronic Properties of PtSn{sub 4} Single Crystal

A topological semimetal PtSn{sub 4} single crystal is grown and the following properties are studied: its electrical resistivity in the temperature range from 4.2 to 300 K, galvanomagnetic properties at temperatures from 4.2 to 80 K and in magnetic fields of up to 100 kOe, and optical properties at room temperature. Theoretical calculations of the electronic structure are performed. It is shown that the residual resistivity is rather small: ρ{sub 0} = 0.47 μΩ cm, which is characteristic of a “good” metal. The ρ(T) dependence is of the metallic type, increasing monotonically with temperature. Analysis of the temperature dependences of the magnetoresistivity suggests that the Fermi surface of the PtSn{sub 4} compound may contain closed sheets. Studies of the Hall effect and the estimates made in the single-band model allowed us to conclude that the predominant type of current carriers are holes with concentration n = 6.8 × 10{sup 21} cm{sup –3} and mobility μ ≈ 1950 cm{sup 2}/(V s) at T = 4.2 K. It is shown that the optical properties of PtSn{sub 4} have features characteristic of “bad” metals. The calculation of the electronic structure of PtSn{sub 4} showed that, in general, this compound has a structure characteristic of metallic systems with a sufficiently large number of electronic states at the Fermi level, which is consistent with the experimental results on the electronic transport and optical properties of the PtSn{sub 4} single crystal.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural control over conductivity and conduction type in thin films of polyphenylquinones

Carrier transport in newly synthesized 2,6-polyphenylquinolines containing an oxygen or phenylamine bridge group between phenylquinoline moieties and alkylated derivatives of carbazole or indolo[3,2-b]carbazole as an arylene radical has been studied. Both electron and hole transport is observed in films of all the polymers studied, with mobility on the order of 10{sup -16} cm{sup 2} V{sup -1} s{sup -1}, which increases on passing from an oxygen-to a phenylamine-type bridging group and from carbazole-to indolocarbazole-based derivatives. It is demonstrated that the conductivity and conduction type can be controlled by varying the type (oxygen or phenylamine) of bridging group between the phenylquinoline moieties or by the selection of an arylene radical.

36 MATERIALS SCIENCE↗

Electrical Conductivity of Rocks and Dominant Charge Carriers: Thermally Activated Positive Holes - Part 1

The prevailing view in the geophysics community is that the electrical conductivity structure of the Earth's continental crust over the 5-35 km depth range can best be understood by assuming the presence of intergranular fluids and/or of intragranular carbon films. Based on single crystal studies of melt-grown MgO, magma-derived sanidine and anorthosite feldspars and upper mantle olivine, we present evidence for the presence of electronic charge carriers, which derive from peroxy defects that are introduced during cooling, under non-equilibrium conditions, through a redox conversion of pairs of solute hydroxyl arising from dissolution of H2O.The peroxy defects become thermally activated in a 2-step process, leading to the release of defect electrons in the oxygen anion sublattice. Known as positive holes and symbolized by h(dot), these electronic charge carriers are highly mobile. Chemically equivalent to O(-) in a matrix of O(2-) they are highly oxidizing. Being metastable they can exist in the matrix of minerals, which crystallized in highly reduced environments. The h(dot) are highly mobile. They appear to control the electrical conductivity of crustal rocks in much of the 5-35 km depth range.

Freund, Friedemann T.↗

Stress-Activated Positive Holes (O− in a Matrix of O2–) Cause DNA Damage in Surface-Dwelling Organisms: Unveiling Mutation-Induced Secrets of Nature

Peroxy defects consist of pairs of tightly bonded oxygen anions in the –1 valence state such as in O3X/OO\YO3 with X, Y = Si4+, Al3+ etc. They commonly occur in igneous, metamorphic and many sedimentary rocks. When such rocks are stressed by tectonic forces, peroxy defects break up, releasing highly mobile electronic charge carriers: defect electrons in the O2– sublattice, i.e. unbound O–, known as “positive holes”, h•. The h• can flow out of stressed rock volumes, spreading far and wide, causing electric currents and electrochemical reactions. This study explores how the h• impact the electron flow in the electron transport chain (ETC) of organisms on the surface of rocks such as gabbro and granite. We found that, by forming hydroxyl radicals and superoxide anions, the h• disrupt the in vivo coordination of reduction-oxidation reactions that are essential for the timing of the redox cycle. Our observations show that stress activation of h• delays the sprouting of certain plant seeds and impedes the growth of yeast cultures, Saccharomyces cerevisiae. The h• induce mutations and affect plant development as evidenced by reduced stem length and leaf size. At the same time, the h• serve as a source of abiotic oxidation, capable of forming various organic compounds in situ. Through the generation of radical species that create new carbon-carbon bonds the h• facilitate the abiotic synthesis of hydrocarbons and other organic molecules essential to life, including porphyrins. Our findings highlight the intricate interplay between positive holes, redox timing, and biological processes, revealing their significant role in influencing the growth and development of organisms in tectonically stressed crustal environments. Understanding these effects enhances our broader comprehension of redox biology and the influence of environmental factors on cellular development in natural settings.

astrobiology↗

Radiation Test Results for a MEMS Microshutter Operating at 60 K

The James Webb Space Telescope (JWST), the successor to the Hubble Space Telescope, is due to be launched in 2013 with the goal of searching the very distant Universe for stars that formed shortly after the Big Bang. Because this occurred so far back in time, the available light is strongly red-shifted, requiring the use of detectors sensitive to the infrared portion of the electromagnetic spectrum. HgCdTe infrared focal plane arrays, cooled to below 30 K to minimize noise, will be used to detect the faint signals. One of the instruments on JWST is the Near Infrared Spectrometer (NIRSPEC) designed to measure the infrared spectra of up to 100 separate galaxies simultaneously. A key component in NIRSPEC is a Micro-Electromechanical System (MEMS), a two-dimensional micro-shutter array (MSA) developed by NASA/GSFC. The MSA is inserted in front of the detector to allow only the light from the galaxies of interest to reach the detector and to block the light from all other sources. The MSA will have to operate at 30 K to minimize the amount of thermal radiation emitted by the optical components from reaching the detector array. It will also have to operate in the space radiation environment that is dominated by the MSA will be exposed to a large total ionizing dose of approximately 200 krad(Si). Following exposure to ionizing radiation, a variety of MEMS have exhibited performance degradation. MEMS contain moving parts that are either controlled or sensed by changes in electric fields. Radiation degradation can be expected for those devices where there is an electric field applied across an insulating layer that is part of the sensing or controlling structure. Ionizing radiation will liberate charge (electrons and holes) in the insulating layers, some of which may be trapped within the insulating layer. Trapped charge will partially cancel the externally applied electric field and lead to changes in the operation of the MEMS. This appears to be a general principle for MEMS. Knowledge of the above principle has raised the concern at NASA that the MSA might also exhibit degraded performance because, i) each shutter flap is a multilayer structure consisting of metallic and insulating layers and ii) the movement of the shutter flaps is partially controlled by the application of an electric field between the shutter flap and the substrate (vertical support grid). The whole mission would be compromised if radiation exposure were to prevent the shutters from opening and closing properly. energetic ionizing particles. Because it is located A unique feature of the MSA is that, as outside the spacecraft and has very little shielding, previously mentioned, it will have to operate at temperatures near 30 K. To date, there are no published reports on how very low temperatures (- 30K) affect the response of MEMS devices to total ionizing dose. Experiments on SiO2 structures at low temperatures (80 K) indicate that the electrons generated by the ionizing radiation are mobile and will move rapidly under the application of an external electric field. Holes, on the other hand, that would normally move in the opposite direction through the SiO2 via a "thermal hopping" process, are effectively immobile at low electric fields as they are trapped close to their generation sites. However, for sufficiently large electric fields (greater than 3 MV/cm) holes are able to move through the SiO2. The larger the field, the more rapidly the holes move. The separation of the electrons and holes leads to a reduced electric field within the insulating layer. To overcome this reduction in electric field, a greater external voltage will have to be applied that alters the normal operation of the device. This report presents the results of radiation testing of the MSA at 60 K. The temperature was higher than the targeted temperature because of a faulty electrical interconnect on the test board. Specifically, our goal was to determine whether the MSA would function propey after a TID of 200 krad(Si).

Rapchun, David A.↗

A charge carrier transport model for donor-acceptor blend layers

Highly efficient organic solar cells typically comprise donor-acceptor blend layers facilitating effective splitting of excitons. However, the charge carrier mobility in the blends can be substantially smaller than in neat materials, hampering the device performance. Currently, available mobility models do not describe the transport in blend layers entirely. Here, we investigate hole transport in a model blend system consisting of the small molecule donor zinc phthalocyanine (ZnPc) and the acceptor fullerene C{sub 60} in different mixing ratios. The blend layer is sandwiched between p-doped organic injection layers, which prevent minority charge carrier injection and enable exploiting diffusion currents for the characterization of exponential tail states from a thickness variation of the blend layer using numerical drift-diffusion simulations. Trap-assisted recombination must be considered to correctly model the conductivity behavior of the devices, which are influenced by local electron currents in the active layer, even though the active layer is sandwiched in between p-doped contacts. We find that the density of deep tail states is largest in the devices with 1:1 mixing ratio (E{sub t} = 0.14 eV, N{sub t} = 1.2 × 10{sup 18 }cm{sup −3}) directing towards lattice disorder as the transport limiting process. A combined field and charge carrier density dependent mobility model are developed for this blend layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Dominant Role of Hole Transport Pathway in Achieving Record High Photoconductivity in Two‐Dimensional Metal–Organic Frameworks

Abstract Metal–organic frameworks (MOFs) with mobile charges have attracted significant attention due to their potential applications in photoelectric devices, chemical resistance sensors, and catalysis. However, fundamental understanding of the charge transport pathway within the framework and the key properties that determine the performance of conductive MOFs in photoelectric devices remain underexplored. Herein, we report the mechanisms of photoinduced charge transport and electron dynamics in the conductive 2D M−HHTP (M=Cu, Zn or Cu/Zn mixed; HHTP=2,3,6,7,10,11‐hexahydroxytriphenylene) MOFs and their correlation with photoconductivity using the combination of time‐resolved terahertz spectroscopy, optical transient absorption spectroscopy, X‐ray transient absorption spectroscopy, and density functional theory (DFT) calculations. We identify the through‐space hole transport mechanism through the interlayer sheet π–π interaction, where photoinduced hole state resides in HHTP ligand and electronic state is localized at the metal center. Moreover, the photoconductivity of the Cu−HHTP MOF is found to be 65.5 S m −1 , which represents the record high photoconductivity for porous MOF materials based on catecholate ligands.

Wang, Denan↗

Dominant Role of Hole Transport Pathway in Achieving Record High Photoconductivity in Two‐Dimensional Metal–Organic Frameworks

Abstract Metal–organic frameworks (MOFs) with mobile charges have attracted significant attention due to their potential applications in photoelectric devices, chemical resistance sensors, and catalysis. However, fundamental understanding of the charge transport pathway within the framework and the key properties that determine the performance of conductive MOFs in photoelectric devices remain underexplored. Herein, we report the mechanisms of photoinduced charge transport and electron dynamics in the conductive 2D M−HHTP (M=Cu, Zn or Cu/Zn mixed; HHTP=2,3,6,7,10,11‐hexahydroxytriphenylene) MOFs and their correlation with photoconductivity using the combination of time‐resolved terahertz spectroscopy, optical transient absorption spectroscopy, X‐ray transient absorption spectroscopy, and density functional theory (DFT) calculations. We identify the through‐space hole transport mechanism through the interlayer sheet π–π interaction, where photoinduced hole state resides in HHTP ligand and electronic state is localized at the metal center. Moreover, the photoconductivity of the Cu−HHTP MOF is found to be 65.5 S m −1 , which represents the record high photoconductivity for porous MOF materials based on catecholate ligands.

14 SOLAR ENERGY↗