Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Graphite/Epoxy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Factors influencing elastic stresses in double cantilever beam specimens

An elastic stress analysis was conducted for a double cantilever beam (DCB) specimen using finite-element methods. The purpose of this study was to identify the important parameters that influence stresses ahead of the delamination front. The study focused on an aluminum DCB specimen, typical of adhesively-bonded joints, and on a graphite/epoxy specimen representing a cocured composite. Opening mode sigma sub y stresses ahead of the crack tip were calculated and compared with those for a monolithic reference specimen. Beyond the singularity-dominated region very near the crack tip, the sigma sub y distribution was elevated compared to the monolithic case. Both the adhesive thickness and the adherend transverse (thickness-direction) stiffness were found to influence the elevation of sigma sub y. In contrast, adherend thickness and longitudinal stiffness has very little effect on this stress distribution. Estimates for adhesive yielding beyond the aluminum DCB crack tip showed that both the area and height of the plastic zone increased to a peak value for increasing adhesive thicknesses. Results from this study would provide insight for comparing data from different DCB specimens and for designing new DCB specimens.

Crews, J. H., Jr.↗

Pulse shaping and extraction of information from ultrasonic reflections in composite materials

The application of ultrasonic inspection to the nondestructive testing of composite materials is examined with reference to specific examples including monitoring of epoxy curing, evaluation of impact damage in a graphite/epoxy laminate, and monitoring of a repaired area in a composite wing plate. Signal processing methods are described which improve time resolution, facilitating identification of discrete echoes corresponding to events in the material.

Kishoni, Doron↗

A cumulative damage model for continuous fiber composite laminates with matrix cracking and interply delaminations

The present cumulative damage model for the prediction of stiffness loss in graphite/epoxy laminates applies a thermomechanical constitutive theory for elastic composites with distributed damage. The model proceeds from a continuum mechanics and thermodynamics approach in which the distributed damage is characterized by a set of second-order tensor-valued internal state variables. A set of damage-dependent laminated plate equations is obtained; this is developed by modifying classical Kirchhoff plate theory.

Allen, David H.↗

Height-tapered double cantilever beam specimen for study of rate effects on fracture toughness of composites

Loading rate effects on the mode I delamination fracture toughness of AS4/3501-6 graphite/epoxy are presently studied by means of a height-tapered double-cantilever beam specimen whose height contour is designed to furnish a slightly decreasing compliance with increasing crack length, in order to yield a stable and smooth crack propagation at high loading rates. This specimen geometry also allows much higher crack propagation velocities to be obtained with either uniform or width-tapered double cantilever beam specimens.

Yaniv, Gershon↗

Analytical and experimental investigation of the notched strength of thick laminates with surface notches

Experimental and analytical investigations of the fracture of a graphite/epoxy laminate with part-through semielliptic surface notches have been conducted. Experimental values of notched strength were determined for a variety of notch aspect ratios and notch depths. Analytical predictions of laminate failure were obtained from three different models. The three models were equally successful in predicting the fracture of laminates with deep notches. The experimental results of laminates with shallow notches indicated more notch sensitivity (that is greater strength reduction) than did the analytical models.

Harris, Charles E.↗

An experimental investigation of the fracture behavior of thick, notched laminated composites

The fracture of high-modulus fiber-reinforced graphite/epoxy laminates with machined crack-like notches is discussed. An experimental program was conducted, in which stacking sequence,laminate thickness, notch size, and specimen configuration have been investigated. This research has led to the fundamental observation that heterogeneity significantly effects the fracture of thin laminates but has a relatively insignificant effect on the fracture of thick laminates. The results of this program are reviewed with the emphasis on the notch sensitivity and design of thick laminates.

Harris, Charles E.↗

Characterization of debond growth mechanism in adhesively bonded composites under mode II static and fatigue loadings

An experimental investigation of adhesively bonded composite joint was conducted to characterize the debond growth mechanism under mode II static and fatigue loadings. For this purpose, end-notched flexure specimens of graphite/epoxy (T300/5208) adherends bonded with EC 3445 adhesive were tested. In all specimen tested, the fatigue failure occurred in the form of cyclic debonding. The present study confirmed the result of previous studies that total strain-energy-release rate is the driving parameter for cyclic debonding. Further, the debond growth resistance under cyclic loading with full shear reversal (i.e., stress ratio, R = -1) is drastically reduced in comparison to the case when subjected to cyclic shear loading with no shear reversal (i.e., R = 0.1).

Mall, S.↗

Effect of bond thickness on fracture and fatigue strength of adhesively bonded composite joints

An experimental investigation of composite to composite bonded joints was undertaken to study the effect of bond thickness on debond growth rate under cyclic loading and critical strain energy release rate under static loading. Double cantilever beam specimens of graphite/epoxy adherends bonded with EC 3445 were tested under mode I loading. A different behavior of fracture and fatigue strength was observed with variation of bondline thickness.

Mall, S.↗

Scaling effects in the static large deflection response of graphite-epoxy composite beams

In the present investigation of scaling effects in the large-deflection response of graphite/epoxy composite beams, eight model beams ranging from 1/6 to full scale in size were subjected to an eccentric axial compressive load promoting large bending deformations and failures; the beams encompassed unidirectional, angle-ply, cross-ply, and quasi-isotropic types. The data obtained pertains to loads, end-displacements, strain measurememts, and qualitative failure measurements. Test results indicate that beam responses scale in the small-deflection region, but deviate as the response becomes nonlinear.

Jackson, Karen E.↗

Stress analysis method for clearance-fit joints with bearing-bypass loads

A simple direct stress analysis method is proposed for a laminate with a clearance-fit fastener subjected to combined bearing and bypass loads in tension or compression, including bearing and bypass loads on bolt-hole contact and local stresses. The approach uses a linear-elastic finite element analysis with an inverse formulation; conditions along the bolt-hole interface are specified by constraint equations that limit nodal displacements to a circular arc corresponding to the bolt diameter. The application of the method to the analysis of the effects of bearing-bypass loading on bolt-hole contact angles and local stresses, with the plate material properties representing a quasi-isotropic T300/5208 graphite/epoxy laminate, is discussed.

Naik, R. A.↗

An experimental study of the initiation and progression of damage in compressively loaded composite laminates in the presence of a circular cutout

Experiments have been carried out on T300/BP907 and IM7/8551-7 graphite/epoxy laminates in an attempt to understand the mechanisms for the initiation and spread of damage in compressively loaded composite laminates containing a circular jutout. Based on the results of holographic interferometry, in-situ photomicrography, and strain measurements, it is found that the failure is initiated by fiber microbuckling in the 0-deg plies. This failure gradually develops as the hole surface in the form of a fiber jutout failure. Subsequent to the 0-deg ply failure, extensive delamination cracking is observed with increasing load, eventually leading to the catastrophic failure of the plate.

Waas, A. M.↗

Vibration testing of impact-damaged composite laminates

A new test is described that can be used to measure changes in vibration properties of impact-damaged composite materials. Impact-induced delamination was observed to significantly affect natural frequencies of vibration and damping properties in cross-ply graphite/epoxy laminates. Natural frequencies are shown to drop by as much as half of their original value and modal damping ratios can increase by a factor of up to eight when large amounts of damage are present. A simple finite element model of the damaged impact specimens was used to predict the effect of delamination on certain vibration properties. Comparison of the finite element calculations with the experimental measurements suggests that delamination was the dominant mechanism of flexural stiffness loss resulting from the transverse impact.

Grady, J. E.↗

Test methods and design allowables for fibrous composites. Volume 2

Topics discussed include extreme/hostile environment testing, establishing design allowables, and property/behavior specific testing. Papers are presented on environmental effects on the high strain rate properties of graphite/epoxy composite, the low-temperature performance of short-fiber reinforced thermoplastics, the abrasive wear behavior of unidirectional and woven graphite fiber/PEEK, test methods for determining design allowables for fiber reinforced composites, and statistical methods for calculating material allowables for MIL-HDBK-17. Attention is also given to a test method to measure the response of composite materials under reversed cyclic loads, a through-the-thickness strength specimen for composites, the use of torsion tubes to measure in-plane shear properties of filament-wound composites, the influlence of test fixture design on the Iosipescu shear test for fiber composite materials, and a method for monitoring in-plane shear modulus in fatigue testing of composites.

Chamis, Christos C.↗

A test method to measure the response of composite materials under reversed cyclic loads

A test method to measure the response of composite materials under reversed cyclic loads is described. The method approximates the long-term response of a component by permitting the composite specimen to respond to the imposed loads and fail in an unconstrained mode rather than in a constrained mode. The method has been successfully used for the reversed cyclic loading of unnotched and notched graphite/epoxy and graphite/PEEK laminates of various stacking sequences. Included in the paper are monotonic tensile and compressive stiffness and strength data at several points in the fatigue lifetime, and damage development information obtained via X-ray radiography for quasi-isotropic T300/5208 and AS4/PEEK laminates with unloaded circular holes.

Bakis, Charles E.↗

Transient dynamic analysis of laminated composite plates subjected to transverse impact

The dynamic response of a composite laminate plate to transverse impact loading is simulated numerically. An FEM scheme based on an eight-point brick element and three-dimensional linear elasticity theory is employed, assuming that the laminate layers are homogeneous and orthotropic. The derivation of the model is given in detail; the numerical implementation is briefly outlined; and results for the impact of 0.5-inch-diameter Al spheres at 500, 1000, and 1500 inch/sec on clamped or simply supported 3 x 3-inch plates made of T300/934 graphite/epoxy prepreg with ply orientation (0/-45/45/90)2S are presented in extensive graphs. The model is shown to provide accurate information on the histories of impactor-plate contact force; impactor displacement and velocity; and displacement, velocity, strain, and stress throughout the plate.

Wu, Hsi-Yung T.↗

Application of fracture mechanics to predict the strength of filament-wound composite specimens with surface damage

The strength of a thick surface notched filament wound graphite/epoxy tensile specimen was predicted using fracture mechanics analysis. The prediction model depended upon the depth of the surface notch and upon the type of failure. Specimens failed in two stages: first a sublaminate with thickness equal to the depth of the surface cut, and second, for increasing load, a sublaminate with thickness equal to the initial thickness minus the cut depth. Analytical predictions and experimental data were in good agreement.

Morris, D. H.↗

Closure of the cubic tensor polynomial failure surface

An analytical method has been developed to ensure closure of the cubic form of the tensor polynomial strength criterion. The intrinsic complexity of the cubic function is such that special conditions must be met to close the failure surface in three-dimensional stress space. These requirements are derived in terms of non-intersecting conditions for asymptotes and an asymptotic plane. To demonstrate the validity of this approach, closed failure surfaces were derived for two graphite/epoxy material systems (3M SP288-T300 and IM7 8551-7). The agreement of test data with this model clearly shows that it is possible to use a higher order cubic failure theory with confidence.

Jiang, Zhiqing↗

Predictions of Poisson's ratio in cross-ply laminates containing matrix cracks and delaminations

A damage-dependent constitutive model for laminated composites has been developed for the combined damage modes of matrix cracks and delaminations. The model is based on the concept of continuum damage mechanics and uses second-order tensor valued internal state variables to represent each mode of damage. The internal state variables are defined as the local volume average of the relative crack face displacements. Since the local volume for delaminations is specified at the laminate level, the constitutive model takes the form of laminate analysis equations modified by the internal state variables. Model implementation is demonstrated for the laminate engineering modulus E(x) and Poisson's ratio nu(xy) of quasi-isotropic and cross-ply laminates. The model predictions are in close agreement to experimental results obtained for graphite/epoxy laminates.

Harris, Charles E.↗