Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Glasses”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Collapse of the waiting time effect in a spin glass

Waiting time measurements are reported here for a bulk polycrystalline sample of the spin glass Cu 0.95 Mn 0.05 . We observe a suppression of aging as the glass temperature is approached from below. These results are interpreted in terms of a spin-glass correlation length approaching and reaching crystallite sizes. They provide a direct experimental connection between the correlation length scale and relaxation times in the spin-glass state. In particular, these measurements track the value of the dynamic critical exponent as the system transitions from the critical temperature regime to its low-temperature, quasistatic nonequilibrium phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Emergence of unconventional spin glass-like state in κ–(ET) 2 Cu[N(CN) 2 ]Cl by introducing weak randomness

Recently, Urai et al. reported that an antiferromagnetic long-range-ordered state in κ-(ET) 2 Cu[N(CN) 2 ]Cl changes into a quantum spin liquid via an unconventional spin glass-like state as randomness is introduced by x-ray irradiation. In this work, we focused on the spin glass-like state and conducted a detailed investigation into it using 13 C-NMR measurements on 150-h x-ray-irradiated κ-(ET) 2 Cu[N(CN) 2 ]Cl. We found that the spin glass-like state is composed of two components: the major component inherits the spin structure of nonirradiated κ-(ET) 2 Cu[N(CN) 2 ]Cl, whereas the minor component differs from that of nonirradiated κ-(ET) 2 Cu[N(CN) 2 ]Cl. We also found that in the spin glass-like state, spin moments fluctuate very slowly around stable directions even at low temperatures, which is very likely related to the Griffiths physics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Superposition principle and nonlinear response in spin glasses

The extended principle of superposition has been a touchstone of spin-glass dynamics for almost 30 years. Here the Uppsala group has demonstrated its validity for the metallic spin glass, CuMn, for magnetic fields H up to 10 Oe at the reduced temperature T r = T/T g = 0.95, where T g is the spin-glass condensation temperature. For H > 10 Oe, they observe a departure from linear response which they ascribe to the development of nonlinear dynamics. The thrust of this paper is to develop a microscopic origin for this behavior by focusing on the time development of the spin-glass correlation length, ξ(t, t w ; H). Here, t is the time after H changes, and t w is the time from the quench for T > T g to the working temperature T until H changes. We connect the growth of ξ(t, t w ; H) to the barrier heights Δ(t w ) that set the dynamics. The effect of H on the magnitude of Δ (t w ) is responsible for affecting differently the two dynamical protocols associated with turning H off (TRM, or thermoremanent magnetization) or on (ZFC, or zero-field-cooled magnetization). This difference is a consequence of nonlinearity based on the effect of H on Δ (t w ). Superposition is preserved if Δ(t w ) is linear in the Hamming distance Hd (proportional to the difference between the self-overlap q EA and the overlap q[Δ(t w )]). However, superposition is violated if Δ(t w ) increases faster than linear in Hd. We have previously shown, through experiment and simulation, that the barriers Δ(t w ) do increase more rapidly than linearly with Hd through the observation that the growth of ξ(t,t w ;H) slows down as ξ(t,t w ; H) increases. In this paper, we display the difference between the zero-field-cooled ξ ZFC (t, t w ; H) and the thermoremanent magnetization ξ TRM (t, t w ; H) correlation lengths as H increases, both experimentally and through numerical simulations, corresponding to the violation of the extended principle of superposition in line with the finding of the Uppsala Group.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Deformations, relaxation, and broken symmetries in liquids, solids, and glasses: A unified topological field theory

Here, we combine hydrodynamic and field theoretic methods to develop a general theory of phonons as Goldstone bosons in crystals, glasses, and liquids based on nonaffine displacements and the consequent Goldstone phase relaxation. We relate the conservation, or lack thereof, of specific higher-form currents with properties of the underlying deformation field—nonaffinity—which dictates how molecules move under an applied stress or deformation. In particular, the single-valuedness of the deformation field is associated with conservation of higher-form charges that count the number of topological defects. Our formalism predicts, from first principles, the presence of propagating shear waves above a critical wave vector in liquids, thus giving a formal derivation of the phenomenon in terms of fundamental symmetries. The same picture provides also a theoretical explanation of the corresponding “positive sound dispersion” phenomenon for longitudinal sound. Importantly, accordingly to our theory, the main collective relaxation timescale of a liquid or a glass (known as the α relaxation for the latter) is given by the phase relaxation time, which is not necessarily related to the Maxwell time. Finally, we build a nonequilibrium effective action using the in-in formalism defined on the Schwinger-Keldysh contour, that further supports the emerging picture. In summary, our work suggests that the fundamental difference between solids, fluids, and glasses has to be identified with the associated generalized higher-form global symmetries and their topological structure, and that the Burgers vector for the displacement fields serves as a suitable topological order parameter distinguishing the solid (ordered) phase and the amorphous ones (fluids, glasses).

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Electronic bonding transitions in oxide glass above two megabar pressures

Inelastic x-ray scattering (IXS) of B 2 O 3 glass up to ∼2.2 Mbar reveals electronic bonding transitions in oxide glasses. B -edge IXS identifies the high-energy feature above ∼1.4 Mbar and a gradual increase in its intensity toward ∼2.2 Mbar, indicating the formation of hypervalent boron via electron polarization to oxygen atoms. The pressure-driven high energy shifts in O -edge IXS indicate pronounced electronic dispersion that increases upon densification of amorphous oxides above ∼2 Mbar. The extent of the energy shifts and enhanced polarization correlate with increasing atomic radius of cation in oxide glass, establishing the role of cation radius in electronic structures of amorphous oxides under compression. The results elucidate the electronic mechanisms behind the structural transformation in low- oxide glasses, where transitions to highly coordinated cations are hindered well above 1 Mbar, providing the origin of incompressibility of low- amorphous oxide under multi-Mbar compression. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Equilibrium Dynamics of Infinite-Range Quantum Spin Glasses in a Field

We determine the low-energy spectrum and Parisi replica-symmetry-breaking function for the spin-glass phase of the quantum Ising model with infinite-range random exchange interactions and transverse and longitudinal ( h ) fields. We show that, for all h , the spin-glass state has full replica symmetry breaking and the local spin spectrum is gapless, with a spectral density that vanishes linearly with frequency. These results are obtained using an action functional—argued to yield exact results at low frequencies—that expands in powers of a spin-glass order parameter, which is bilocal in time, and a matrix in replica space. We also present the exact solution of the infinite-range spherical quantum p -rotor model at nonzero h : here, the spin-glass state has one-step replica symmetry breaking and gaplessness only appears after imposition of an additional marginal stability condition. Possible connections to experiments on random arrays of trapped Rydberg atoms are noted. Published by the American Physical Society 2024

Tikhanovskaya, Maria↗
DOE OSTI2022

Impact of non‐framework cation mixing on the structure and crystallization behavior of model high‐level waste glasses

Abstract Spinel crystallization is known to be detrimental to the operation of Joule heated ceramic melters during the vitrification of iron‐rich high‐level nuclear wastes (HLW) into borosilicate glasses. The literature on this subject focuses on tackling the problem by developing empirical constraints to design compositions, which limit the fraction of spinels formed in the melter or by developing empirical models to predict the settling behavior of spinels in the melter as a function of the glass composition. While these empirical models can predict the behavior of most of the compositions, they are not failsafe as there are always some compositions, whose behavior is beyond the predictive ability of these models. This can lead to undesirable situations during the vitrification of the nuclear waste, and therefore an in‐depth investigation of the chemo‐structural descriptors controlling the crystallization behavior in these glasses is warranted. Accordingly, the present study aims to understand the impact of non‐framework cation mixing (i.e., Li + /Na + and Ca 2+ /Na + ) on the structure (through Raman spectroscopy and Mössbauer spectroscopy) and crystallization behavior (through XRD, SEM‐EDS, and vibrating sample magnetometry) of iron‐rich model HLW glasses in the system: (mol.%) x M y O–(25− x ) Na 2 O–9.12 B 2 O 3 –6.4 Al 2 O 3 –51.25 SiO 2 –7.22 Fe 2 O 3 –0.38 MnO–0.08 Cr 2 O 3 –0.55NiO (M y O = Li 2 O or CaO).

Balasubramanya, Nikhila↗
DOE OSTI2022

Mass Transport in Binary TiO 2 :SiO 2 and GeO 2 :SiO 2 Direct Ink Write Glasses

The mass transport mechanisms of Ti in TiO 2 :SiO 2 and Ge in GeO 2 :SiO 2 direct ink write, additively manufactured glasses were studied. Due to the low solubility of Ti in SiO2 and high melting point of TiO 2 relative to SiO 2 , Ti transport was found to occur via solid state interdiffusion between adjoining SiO 2 and TiO 2 precursor particles. The diffusivity of titanium in SiO 2 measured over typical sintering temperatures (1000-1300 °C) using Rutherford backscattering spectrometry was D = 9.1 × 10 -7 [m2/sec] exp ($\frac{378[\frac{kJ}{mol}]}{RT}$. This provides an estimate of ~30 nm for the diffusion length under typical sintering conditions (2 hrs. at 1200 °C). Although Ti and Ge have similar diffusivities in SiO 2 glass at low concentrations, GeO 2 was found to be much more mobile during the sintering of printed GeO 2 :SiO 2 green bodies. This was evident in glasses with phase separated GeO 2 regions over length scales of ~10 μm and in experiments involving binary xerogels in which GeO 2 migrated over ~10 μm through cracked, porous SiO 2 layers. Large phase separated regions and long transport lengths in GeO 2 :SiO 2 suggest that the transport of GeO 2 occurs prior to the densification of the SiO 2 matrix via an alternative mechanism such as capillary flow. These results inform important considerations in the design of index modifying inks for the direct ink write process, namely initial precursor phase, mutual solubility with the base SiO 2 glass, and mass transport throughout the sintering process.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Impact of aqueous solution pH on network structure of corrosion–induced surface layers of boroaluminosilicate glass

Understanding of the long-term stability of vitrified nuclear waste glass is critical to its safe storage, but knowledge gaps remain regarding the corrosion mechanism, especially with respect to surface alteration layers whose presence changes the observed corrosion rates. Here, we report the aqueous corrosion of a model boroaluminosilicate glass at ground water relevant pHs as investigated by vibrational spectroscopy to understand the network structure of the alteration layer that we hypothesize controls the corrosion rates. Both specular reflection infrared spectroscopy and infrared variable angle spectroscopic ellipsometry were used to elucidate details of the structure of the alteration layers formed at pH 7 and pH 9. After 2312 days, the thickness of the alteration layer is found to be ~2000 nm for corrosion at pH 7 and ~300 nm for corrosion at pH 9. Here, the interpretation of the vibrational spectra suggests that alteration layers formed at pH 7 and pH 9 both exhibit a porous network with "silica-like" structures, but with differences in the bond lengths and bond angles in the glass network. Moreover, the relative abundance of the hydrous species within the porous network appears to be dependent on pH. Additionally, the spectroscopic data suggest that the B and Ca trapped in the alteration layer during the secondary corrosion of the pH 9 pre-corroded sample in pH 3 solution are hydrated within the nano-porous layer and not bound to the silicate network. However, the precise chemical form remains to be determined. Based on these findings, we propose that the combination of the network structure of the alteration layer and the relative abundance of hydrous species within the alteration layer act to control the transport of ionic species dissolved from the reaction front to the aqueous solution outside the glass.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Atomistic Simulation of Glasses and Amorphous Materials: Challenges and Opportunities for the Next Decade

Atomistic simulations have become indispensable tools for understanding glass structure, dynamics, and properties, yet persistent challenges limit their predictive power. This perspective examines three interconnected issues, namely glass formation procedures, interatomic potential development, and machine learning applications, which emerged from the 5th International Workshop on Challenges of Atomistic Simulations of Glasses and Amorphous Materials. We identify convergent community priorities for (i) standardized validation protocols, (ii) curated benchmark datasets with complete metadata, and (iii) open repositories for glasses. A systematic was forward is provided by a hierarchical validation framework for assessing the structural fidelity, property prediction, and behavioral realism of simulation techniques. Looking ahead, transformative advances are promised by the fusion of classical techniques with machine learning based approaches, for instance, by integrating swap Monte Carlo with machine-learning (ML) potentials, leveraging foundation models through transfer learning, and finetuning ML potentials with experimental data. Progress depends on the community committing to validated models, reproducible protocols, and sustained data sharing.

Krishnan, N. M. Anoop↗
DOE OSTI2023

Heat transfer enhancement due to cold cap motion from bubbling in a waste glass melter

In this study, a computational fluid dynamics (CFD) model was developed to model the motion of a solid cold cap in a waste glass melter. Forced convection bubblers at the base of the melter release air into the molten glass, which forms large bubbles that travel upwards to the cold cap and augment heat transfer from the glass to the cold cap. The CFD model employs the Navier- Stokes equations to solve for the fluctuating flowfield using a rigid body motion dynamic fluid body interaction module. This allows for movement of the floating body in response to the bubbling forces calculated at each time step. Further, the heat flux delivered to the cold cap by the convective bubbling is studied as a function of the bubbling rate. Results for the moving cold cap are compared with the computed heat flux trends for a stationary cold cap. The heat flux delivered to the cold cap from the glass is 25% higher for the case with the moving cold cap. The heat flux was found to be proportional to v0.6 as opposed to v0.9 (where v is the normalized bubbling rate) for the stationary cold cap.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

Arrays of glass wedges for multi-dimensional optical diagnostics

There is a common need in the advancement of optical diagnostic techniques to increase the dimensionality of measurements. For example, point measurements could be improved to multi-point, line, planar, volumetric, or time-resolved volumetric measurements. In this work, a unique optical element is presented to enable multi-dimensional measurements, namely, an array of glass wedges. A light source is passed through the wedges, and different portions of the illumination are refracted by different amounts depending on the glass wedge angle. Subsequent optics can be used to focus the light to multiple points, lines, or planes. Basic characterization of a glass wedge array is presented. Additional wedge-array configurations are discussed, including the use of a periodic intensity mask for multi-planar measurements via structured illumination. The utility of this optical element is briefly demonstrated in (a) multi-planar flame particulate measurements, (b) multi-point femtosecond-laser electronic excitation tagging for flow velocimetry, and (c) multi-line nitric oxide molecular tagging velocimetry in a hypersonic shock-tunnel. One significant advantage of this optical component is its compatibility with high-energy laser sources, which may be a limiting factor with other beam-splitting or beam-forming elements such as some diffractive optics. Additionally, an array of glass wedges is simple and easily customizable compared to other methods for forming multiple closely spaced illumination patterns. In conclusion, suggestions for further development and applications are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Impact of raw material surface oxide removal on dual band infrared optical properties of As 2 Se 3 chalcogenide glass

The manufacturing of low loss chalcogenide glasses (ChGs) for optoelectronic applications is ultimately defined by the concentration of impurities present in starting materials or imparted via processing. We describe a rapid method for purifying metallic starting materials in As 2 Se 3 glass where oxide reduction is correlated to optical and physical properties. Specifically, As-O reduction enhances the glass’ dual-band optical transparency proportional to the extent (13-fold reduction) of oxide reduction, and is accompanied by a change in density and hardness associated with changes in matrix bonding. A significant modification of the glass’ index and LWIR Abbe number is reported highlighting the significant impact purification has on material dispersion control required in optical designs.

36 MATERIALS SCIENCE↗
DOE OSTI2022

SCHOTT laser glass [Invited]

Laser glass is a highly engineered optical material that enables the amplification of light in laser systems. It is known for being the heart of the largest laser facilities ever built, where thousands of neodymium-doped meter-sized slabs of laser glass create intense beams of near-infrared laser radiation used to study fusion reactions. Or if doped with ytterbium and erbium, laser glass can be made into millimeter-sized components empowering range-finders and dermatological lasers. Decades of development have poised laser glass for the next challenge on the horizon: amplifying light for sustainable inertial fusion energy power plants.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Characterization of the Sulfur-Saturated Melt Versions of the LAW Phase 5 Glasses

This report provides results from the chemical analyses of a series of sulfur-saturated melt versions of the LAW Phase 5 glasses, a series of simulated nuclear waste glasses designed and fabricated at Pacific Northwest National Laboratory. Results from the chemical analyses of the wash solution resulting from the preparation of these glasses are also included. These data will be used in the development of enhanced property/composition models for waste glass vitrification at Hanford.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Composition-Based Density Model for High Level Waste Glasses

In this report, the Savannah River National Laboratory (SRNL) provides a first-principles model capable of predicting the density of high-level waste (HLW) glass based on the glass composition. The model relies on the additivity of the specific volume of bound glass oxides to obtain a quantitative evaluation of the approximate glass density.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Preliminary Enhanced LAW Glass Formulation Algorithm

This report summarizes the Preliminary Enhanced Low-Activity Waste Glass Formulation Algorithm (GFA), its background information, and the calculations it performs. The Preliminary Enhanced Low-Activity Waste GFA is a tool that has been developed in MATLAB to formulate glass for a given waste composition while attempting to maximize waste loading. It is intended for use at the Hanford Tank Waste Treatment and Immobilization Plant, where nuclear waste will be vitrified into glass. The formulated glass is required to satisfy several processing and product quality constraints. In addition, calculations must account for associated uncertainties in constraint prediction and measurement. The GFA adheres to Pacific Northwest National Laboratory nuclear quality assurance procedures and has been validated and verified.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

Physical and Flow Properties of Glass Forming Chemicals (V2O5, SnO, SnO2, Cr2O3, FeCr2O4, and ZrSiO4) and Mixtures

For a sustainable nuclear waste vitrification process at the Hanford Tank Waste Treatment and Immobilization Plant (WTP), proper selection and consistent supply of glass-forming chemicals (GFCs) are crucial. Establishing rigorous acceptance criteria for the characterization of GFCs will be required to operate the vitrification facility and to mitigate any processing issues or failures. Low-activity wastes (LAW) are blended with GFCs to form slurry melter feeds and vitrified in a melter. To enhance properties of waste glasses, new chemicals are being introduced to the current GFC mixture (Vienna et al. 2016; Muller et al. 2017, 2019). In this study, three new GFCs were evaluated for enhanced LAW glass formulations: chromium oxide (Cr 2 O 3 ), vanadium oxide (V 2 O 5 ), and stannic oxide (SnO 2 ). These three oxide components are included in enhanced waste glass (EWG) formulations and GFCs with the appropriate physical and flow properties are needed. As a starting point, single metal oxide GFCs: Cr 2 O 3 , V 2 O 5 , and SnO 2 were sourced and tested. To characterize these new individual GFCs and mixtures of GFCs, the industrial bulk characterization consultant, Jenike and Johanson, was employed to measure physical and flow properties of individual GFCs and their mixtures. Pacific Northwest National Laboratory (PNNL) also measured several selected physical properties for data evaluation as a quality assurance step. In addition, PNNL measured physical and rheological properties of slurry melter feeds containing those GFCs. Subsequent data analyses and verification were conducted. The purpose of this report is to assess the applicability of these GFCs for LAW vitrification based on their properties. This report will help understand measured data and evaluate new GFCs for use. Moreover, this report may give useful insights to help troubleshoot any GFC and melter feed transport and mixing issues that arise during processing, leading to a successful cleanup mission at WTP.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗