SEARCH · Engineering Papers

Results for “Generators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

All sources NASA NTRS DOE OSTI

NASA NTRS1987

On the generation of magnetohydrodynamic waves in a stratified and magnetized fluid. I - Vertical propagation

The generation of MHD waves by turbulent motions in a stratified medium with an embedded uniform magnetic field, a topic which is relevant to the study of the solar atmosphere, is considered. Both compressible and incompressible MHD waves are treated in a one-dimensional approach; however, the direction of the background magnetic field is permitted to vary in an arbitrary direction. Theoretical expressions for MHD energy fluxes are obtained as a function of wave frequency and multipole coefficients. It is shown that monopole, dipole, and quadrupole emissions are responsible for the generation of the compressible components of the fast and slow modes. However, the incompressible components and the Alfven modes can be generated by the dipole emission only. Specific results obtained for special magnetic field geometries are discussed for the fast and slow modes.

Musielak, Z. E.↗

NASA NTRS1987

Laser-energized MHD generator for hypersonic electric air-turborockets

The analysis and design of an open cycle Faraday MHD generator suitable for use in an electric air-turborocket cycle, the MHD-fanjet, is presented. The working fluid for the generators is unseeded high temperature hydrogen, generated by a standing, laser-supported combustion wave. This study also examines the performance of an advanced combined-cycle engine, powered by beamed energy, proposed for use in future SSTO aerospacecraft. This innovative engine incorporates the MHD-fanjet for the acceleration role within the hypersonic flight regime, from about Mach 11 to above Mach 25. Performance results indicate that specific impulses could fall in the range of 10,000 to 16,000 seconds. This would enable propellant mass fractions as low as 6 percent to 9 percent for such advanced shuttlecraft flying SSTO missions to low earth orbit.

Myrabo, L. N.↗

NASA NTRS1987

Study of Plasma Motor Generator (PMG) tether system for orbit reboost

Detailed designs were produced for a 2 kW plasma motor generator tether system based largely on existing hardware and hardware designs. Specifically, the hollow cathode design and electronics are derived from ion propulsion equipment. A prototype tether was constructed and will be tested for deployment, strength, resistance to breakage and abrasion and electrical properties. In addition, laboratory development models of the electronics will be used to operate two plasma motor generator hollow cathode assemblies with this tether to verify electrical performance parameters for the complete system. Results show that a low cost demonstration of a plasma motor generator tether system appears to be feasible by the middle of the 1990s.

Source record↗

NASA NTRS1987

On the next generation of reliability analysis tools

The current generation of reliability analysis tools concentrates on improving the efficiency of the description and solution of the fault-handling processes and providing a solution algorithm for the full system model. The tools have improved user efficiency in these areas to the extent that the problem of constructing the fault-occurrence model is now the major analysis bottleneck. For the next generation of reliability tools, it is proposed that techniques be developed to improve the efficiency of the fault-occurrence model generation and input. Further, the goal is to provide an environment permitting a user to provide a top-down design description of the system from which a Markov reliability model is automatically constructed. Thus, the user is relieved of the tedious and error-prone process of model construction, permitting an efficient exploration of the design space, and an independent validation of the system's operation is obtained. An additional benefit of automating the model construction process is the opportunity to reduce the specialized knowledge required. Hence, the user need only be an expert in the system he is analyzing; the expertise in reliability analysis techniques is supplied.

Babcock, Philip S., IV↗

NASA NTRS1987

Automatic program generation from specifications using Prolog

An automatic program generator which creates Prolog programs from input/output specifications is presented. The generator takes as input descriptions of the input and output data types, a set of tests, a set of transformations and the input/out relation. Abstract data types are used as models. The tests, the transformations and the input/out relation are also specified by equations. The heuristics used by the automatic propram generator in building Prolog programs are discussed.

Pelin, Alex↗

NASA NTRS1987

Approaches to the automatic generation and control of finite element meshes

The algorithmic approaches being taken to the development of finite element mesh generators capable of automatically discretizing general domains without the need for user intervention are discussed. It is demonstrated that because of the modeling demands placed on a automatic mesh generator, all the approaches taken to date produce unstructured meshes. Consideration is also given to both a priori and a posteriori mesh control devices for automatic mesh generators as well as their integration with geometric modeling and adaptive analysis procedures.

Shephard, Mark S.↗

NASA NTRS1988

Archetyping: A software generation and management methodology

Many knowledge based software generation methods have been proposed to improve software quality and programmer productivity. Several government and industry initiatives have focused on software reusability as one solution to these problems. DARTS (trademark), a General Dynamics proprietary symbolic processing technology, provides a unique solution to the reuse problem: archtyping. Archtyping is the embedding of high order language statements in text files. An advanced macroprocessor uses the text files to generate new versions of complex software systems. A DARTS program, the Software Generation and Configuration Management (SGCM) System automates the archtyping process and maintenance cycle. The DARTS technology is briefly discussed, archtyping is described, and the SGCM system is presented in detail.

Rothman, Hugh B.↗

NASA NTRS1988

Next-generation space manipulator

In 1977, the Protoflight Manipulator Arm (PFMA) was designed and built. It is one of two space qualified manipulators. A new conceptual design for the next generation manipulator of space applications is presented. The next generation manipulator and the PFMA are described in detail. Their differences could have a major influence on the construction, testing, and performance of a space arm. Assessed in detail are these technologies and their effect on the design. Servicing is an important goal of robotics in space. Parameters such as environment, type of task, time sequence, and dexterity will affect the arm and its ability to accomplish its mission. Requirements such as these are important considerations in the design of the next generation space arm.

Brunson, P.↗

NASA NTRS1986

Elliptic generation of composite three-dimensional grids about realistic aircraft

An elliptic method for generating composite grids about realistic aircraft is presented. A body-conforming grid is first generated about the entire aircraft by the solution of Poisson's differential equation. This grid has relatively coarse spacing, and it covers the entire physical domain. At boundary surfaces, cell size is controlled and cell skewness is nearly eliminated by inhomogeneous terms, which are found automatically by the program. Certain regions of the grid in which high gradients are expected, and which map into rectangular solids in the computational domain, are then designated for zonal refinement. Spacing in the zonal grids is reduced by adding points with a simple, algebraic scheme. Details of the grid-generation method are presented along with results of the present application, a wing/body configuration based on the F-16 fighter aircraft.

Sorenson, Reese L.↗

NASA NTRS1988

Proton beam generation of oblique whistler waves

It is known that ion beams are capable of generating whistler waves that propagate parallel to the mean magnetic field. Such waves may have been observed both upstream of the earth's bow shock and in the vicinity of comets. Previous analyses are extended to include propagation oblique to the mean magnetic field. The instability is generated by the perpendicular component of free energy in the ions, which can arise either via a temperature anisotropy or via a gyrating distribution. In the former case, the generation of whistler waves is confined to a fairly narrow cone of propagation directions centered about parallel propagation; in the latter case, the maximum growth of the instability can occur at fairly large obliquities (theta equal to about 50 deg).

Wong, H. K.↗

NASA NTRS1987

Algebraic grid generation

Algebraic grid generation is the direct expression of a physical coordinate system as a function of a uniform grid in a rectangular computational coordinate system. Algebraic grid generation is based on mathematical interpolation and is presented in general terms of multivariate transfinite interpolation. The multisurface method and the two-boundary technique are described as univariate procedures that can be applied within the context of transfinite interpolation. A technique for grid clustering is described. Problems that are commonly encountered in three-dimensional grid generation are discussed and approaches for dealing with complex physical domains using multiple computational grid blocks are presented.

Smith, Robert E.↗

NASA NTRS1988

Automated generation of reliability models

The abstract semi-Markov specification interface to the SURE (Semi-Markov Range Evaluator) tool (ASSIST) program allows the user to describe the Markov model in a high-level language. Instead of listing the individual states of the model, the user specifies the rules governing the behavior of the system, and these are used to automatically generate the model. A small number of statements in the abstract language can describe a large, complex model. Becuase no assumptions are made about the system being modeled, ASSIST can be used to generate models describing the behavior of any type of system. The abstract model definition and the automatic model generation strategy are described. Analysis of an example fault-tolerant architecture, a triad of processor with cold spare processors, shows how the behavior of a system can be captured by a few general rules. The syntax of the ASSIST input language is then described and demonstrated by creating a model to describe the fault behavior of the example architecture. The flexibility of the abstract language is demonstrated by expanding the example to model multiple triads of processors sharing a pool of cold spare processors.

Johnson, Sally C.↗

NASA NTRS1988

The generation of proton beams in two-ribbon flares

It is shown that, in the current sheet at the top of the arcade of postflare loops in a two-ribbon solar flare, particle beams are generated by direct electric-field acceleration. The acceleration process is completely collisionless and is limited only by the gyromotion along the component of the magnetic field perpendicular to the sheet. This mechanism is similar to the particle acceleration in the geomagnetic tail. Neutral beams emanate from the sheet with almost zero pitch angle, making protons the main carriers of the beam energy. Approximately 10 to the 35th protons/sec are generated with a typical energy of 200 keV. Their energy distribution is a single power law, with an upper and lower energy cut-off. Such a population is capable of simultaneously generating the observed impulsive-phase hard X-rays and the gamma rays.

Martens, P. C. H.↗

NASA NTRS1988

Generating fractal-like surfaces on general purpose mesh-connected computers

Realistic images of natural surfaces are often generated using computationally expensive stochastic modeling techniques. Here a parallel procedure to generate such models is presented. The target machines are general-purpose mesh-connected computers. The complexity of the procedure is similar to that of a proposed special-purpose parallel fractal generator.

Wainer, Michael↗

NASA NTRS1988

Reliability Model Generator for fault-tolerant systems

This paper discusses an analysis tool, the Reliability Model Generator, that reasons from structural and functional system design specifications to generate a reliability model for the system under investigation. The resultant model defines a system state space sufficient to characterize the effects of single and multiple component failures. This model may then be examined by the analyst or used as input to an existing reliability evaluation tool, the Semi-Markov Unreliability Range Evaluator (SURE), to compute numeric bounds for system reliability (i.e., safety, mission success, availability, etc.). In defining the input to the Reliability Model Generator, a separation of the component function from structural specification is proposed to allow easy modification for analysis of alternative architectures. A hierarchical system description paradigm promotes multiple abstractions, thereby enabling analysis at all phases of the design process. The work described in this paper has been supported under NASA contract NAS1-10899, Integrated Airframe/Propulsion Control System Architecture (IAPSA II). IAPSA II promotes a system engineering methodology and supporting analytical tools to evaluate flight control architecture configuration alternatives during early phases of the design cycle when the cost and schedule impact of design revisions is minimal. Emphasis is placed on traceability to ensure that the requirements drive the resulting design.

Catherine M McCann↗

NASA NTRS1989

Microwave Comb Generator

Stable reference tones aid testing and calibration of microwave receivers. Signal generator puts out stable tones in frequency range of 2 to 10 GHz at all multiples of reference input frequency, at any frequency up to 1 MHz. Called "comb generator" because spectral plot resembles comb. DC reverse-bias current switched on and off at 1 MHz to generate sharp pulses in step-recovery diode. Microwave components mounted on back of special connector containing built-in attenuator. Used in testing microwave and spread-spectrum wide-band receivers.

Sigman, E. H.↗

NASA NTRS1989

Improved Flow-Controlling Vortex Generator

Symmetrical tangential streams control flow of radial primary streams. Vortex generator uses small secondary stream of fluid to control normally-larger primary stream. Improved version of vortex generator described in "Variable Control Port for Fluidic Control Device," (NPO-16603). Secondary, or control, flows entering tangentially through diametrically opposite ports set up swirling motion restraining primary flow. Pressure of secondary fluid in relation to primary fluid controlling factor. Like valve, vortex generator varies rate of flow of primary fluid from maximum value down to zero. When properly designed, requires low pressure differential between primary and secondary streams and expends relatively small amount of secondary fluid.

Collins, Earl R., Jr.↗

NASA NTRS1988

Automated knowledge generation

The general objectives of the NASA/UCF Automated Knowledge Generation Project were the development of an intelligent software system that could access CAD design data bases, interpret them, and generate a diagnostic knowledge base in the form of a system model. The initial area of concentration is in the diagnosis of the process control system using the Knowledge-based Autonomous Test Engineer (KATE) diagnostic system. A secondary objective was the study of general problems of automated knowledge generation. A prototype was developed, based on object-oriented language (Flavors).

Myler, Harley R.↗