Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GaN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Computationally predicted energies and properties of defects in GaN

Recent developments in theoretical techniques have significantly improved the predictive power of density-functional-based calculations. In this article, we discuss how such advancements have enabled improved understanding of native point defects in GaN. We review the methodologies for the calculation of point defects, and discuss how techniques for overcoming the band-gap problem of density functional theory affect native defect calculations. In particular, we examine to what extent calculations performed with semilocal functionals (such as the generalized gradient approximation), combined with correction schemes, can produce accurate results. The properties of vacancy, interstitial, and antisite defects in GaN are described, as well as their interaction with common impurities. We also connect the first-principles results to experimental observations, and discuss how native defects and their complexes impact the performance of nitride devices. Overall, we find that lower-cost functionals, such as the generalized gradient approximation, combined with band-edge correction schemes can produce results that are qualitatively correct. However, important physics may be missed in some important cases, particularly for optical transitions and when carrier localization occurs.

36 MATERIALS SCIENCE↗

Optimizing performance and yield of vertical GaN diodes using wafer scale optical techniques

Abstract To improve the manufacturing of vertical GaN devices for power electronics applications, the effects of defects in GaN substrates need to be better understood. Many non-destructive techniques including photoluminescence, Raman spectroscopy and optical profilometry, can be used to detect defects in the substrate and epitaxial layers. Raman spectroscopy was used to identify points of high crystal stress and non-uniform conductivity in a substrate, while optical profilometry was used to identify bumps and pits in a substrate which could cause catastrophic device failures. The effect of the defects was studied using vertical P-i-N diodes with a single zone junction termination extention (JTE) edge termination and isolation, which were formed via nitrogen implantation. Diodes were fabricated on and off of sample abnormalities to study their effects. From electrical measurements, it was discovered that the devices could consistently block voltages over 1000 V (near the theoretical value of the epitaxial layer design), and the forward bias behavior could consistently produce on-resistance below 2 mΩ cm 2 , which is an excellent value considering DC biasing was used and no substrate thinning was performed. It was found that high crystal stress increased the probability of device failure from 6 to 20%, while an inhomogeneous carrier concentration had little effect on reverse bias behavior, and slightly (~ 3%) increased the on-resistance (R on ). Optical profilometry was able to detect regions of high surface roughness, bumps, and pits; in which, the majority of the defects detected were benign. However a large bump in the termination region of the JTE or a deep pit can induce a low voltage catastrophic failure, and increased crystal stress detected by the Raman correlated to the optical profilometry with associated surface topography.

42 ENGINEERING↗

Using machine learning with optical profilometry for GaN wafer screening

Abstract To improve the manufacturing process of GaN wafers, inexpensive wafer screening techniques are required to both provide feedback to the manufacturing process and prevent fabrication on low quality or defective wafers, thus reducing costs resulting from wasted processing effort. Many of the wafer scale characterization techniques—including optical profilometry—produce difficult to interpret results, while models using classical programming techniques require laborious translation of the human-generated data interpretation methodology. Alternatively, machine learning techniques are effective at producing such models if sufficient data is available. For this research project, we fabricated over 6000 vertical PiN GaN diodes across 10 wafers. Using low resolution wafer scale optical profilometry data taken before fabrication, we successfully trained four different machine learning models. All models predict device pass and fail with 70–75% accuracy, and the wafer yield can be predicted within 15% error on the majority of wafers.

36 MATERIALS SCIENCE↗

Potential for neutron and proton transmutation doping of GaN and Ga 2 O 3

As the potential applications of GaN and Ga 2 O 3 are limited by the inadequacy of conventional doping techniques, specifically when uniform selective area p-type doping is required, the potential for transmutation doping of these materials is analyzed. All transmuted element concentrations are reported as a function of time for several common proton and neutron radiation sources, showing that previously published results considered a small subset of the dopants produced. A 40 MeV proton accelerator is identified as the most effective transmutation doping source considered, with a 2.25 × 10 17 protons per cm 2 fluence yielding net concentrations of uncompensated p-type dopants of 7.7 × 10 15 and 8.1 × 1015 cm -3 for GaN and Ga 2 O 3 , respectively. Furthermore, it is shown that high energy proton accelerator spectra are capable of producing dopants required for magnetic and neutron detection applications, although not of the concentrations required for current applications using available irradiation methods.

36 MATERIALS SCIENCE↗

High voltage and high current density vertical GaN power diodes

We report on the realization of a GaN high voltage vertical p-n diode operating at > 3.9 kV breakdown with a specific on-resistance < 0.9 mΩ.cm 2 . Diodes achieved a forward current of 1 A for on-wafer, DC measurements, corresponding to a current density > 1.4 kA/cm 2 . An effective critical electric field of 3.9 MV/cm was estimated for the devices from analysis of the forward and reverse current-voltage characteristics. Furthermore this suggests that the fundamental limit to the GaN critical electric field is significantly greater than previously believed.

30 DIRECT ENERGY CONVERSION↗

High voltage GaN p-n diodes formed by selective area regrowth

GaN p-n diodes were formed by selective area regrowth on freestanding GaN substrates using a dry etch, followed by post-etch surface treatment to reduce etch-induced defects, and subsequent regrowth into wells. Etched-and-regrown diodes with a 150 gm diameter achieved 840 V operation at 0.5 A/cm 2 reverse current leakage and a specific on-resistance of 1.2 mΩ•cm 2 . Etched-and-regrown diodes were compared with planar, regrown diodes without etching on the same wafer. Both types of diodes exhibited similar forward and reverse electrical characteristics, which indicate that etch-induced defectivity of the junction was sufficiently mitigated soas not to be the primary cause for leakage. An area dependence for forward and reverse leakage current density was observed, suggesting that the mesa sidewall provided a leakage path.

42 ENGINEERING↗

Metal modulation epitaxy growth for extremely high hole concentrations above 10{sup 19} cm{sup -3} in GaN

The free hole carriers in GaN have been limited to concentrations in the low 10{sup 18} cm{sup -3} range due to the deep activation energy, lower solubility, and compensation from defects, therefore, limiting doping efficiency to about 1%. Herein, we report an enhanced doping efficiency up to {approx}10% in GaN by a periodic doping, metal modulation epitaxy growth technique. The hole concentrations grown by periodically modulating Ga atoms and Mg dopants were over {approx}1.5x10{sup 19} cm{sup -3}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Polarity inversion of N-face GaN by plasma-assisted molecular beam epitaxy

The polarity of GaN grown by plasma-assisted molecular beam epitaxy was inverted from N-face to Ga-face by simultaneously exposing the surface to Mg and activated N fluxes during a growth interruption at a reduced substrate temperature. Growth studies suggested that a Mg{sub x}N{sub y} compound was responsible for inverting the crystal. The change in polarity was verified in situ by reflection high energy electron diffraction via GaN surface reconstructions, and ex situ by convergent beam electron diffraction and KOH etch studies. The surface of the inverted material showed smooth step flow features. Ga-face high electron mobility transistors with good dc and small signal performance were fabricated on the inverted epilayers. A drain-source current of 0.84 A/mm was measured at a gate-source voltage of +1 V. Current-gain cutoff and maximum oscillation frequencies of 22 and 53 GHz, respectively, were measured in these devices. The device performance is similar to that of Ga-face transistors with comparable dimensions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strain relaxation dependent island nucleation rates during the Stranski-Krastanow growth of GaN on AlN by molecular beam epitaxy

This study reports on the correlation between strain relaxation and nucleation kinetics during the Stranski-Krastanow growth of GaN on (0001)AlN by plasma-assisted molecular beam epitaxy. Using reflection high-energy electron diffraction and real-time desorption mass spectrometry, the strain-related Ga adatom detachment and desorption rates were determined, giving information about the average GaN island nucleation rate. Two different regimes were found: one at low-temperature growth (690<T{sub S}<720 deg. C), where strain relaxation occurred slowly, yielding impeded island nucleation rates and small island sizes (diameter {approx}8-12 nm and height {approx}2.3-2.7 nm). In the other, i.e., high-temperature growth regime (T{sub S}>720 deg. C), islands showed an abrupt relaxation mode, accompanied by a fast nucleation rate toward island sizes twice as large.

36 MATERIALS SCIENCE↗

Self-assembled GaN hexagonal micropyramid and microdisk

The self-assembled GaN hexagonal micropyramid and microdisk were grown on LiAlO{sub 2} by plasma-assisted molecular-beam epitaxy. It was found that the (0001) disk was established with the capture of N atoms by most-outside Ga atoms as the (1x1) surface was constructing, while the pyramid was obtained due to the missing of most-outside N atoms. The intensity of cathode luminescence excited from the microdisk was one order of amplitude greater than that from M-plane GaN.

36 MATERIALS SCIENCE↗

Hydrogen effect on near-atmospheric nitrogen plasma assisted chemical vapor deposition of GaN film growth

The effect of hydrogen on near-atmospheric nitrogen plasma and low temperature growth of GaN thin film was investigated. To investigate nitrogen plasma diluted with hydrogen, optical emission spectroscopy (OES) was employed. OES indicates that hydrogen enhances the generation of the nitrogen first positive system and first negative systems by providing an additional kinetic pathway. The plasma also decomposed triethylgallium and generated Ga ions even at room temperature. Using this plasma, GaN film grew on sapphire substrate epitaxially at growth temperatures of above 170 deg. C and crystallized at 55 deg. C.

36 MATERIALS SCIENCE↗

Impacts of anisotropic lattice relaxation on crystal mosaicity and luminescence spectra of m-plane Al{sub x}Ga{sub 1-x}N films grown on m-plane freestanding GaN substrates by NH{sub 3} source molecular beam epitaxy

In-plane anisotropic lattice relaxation was correlated with the crystal mosaicity and luminescence spectra for m-plane Al{sub x}Ga{sub 1-x}N films grown on a freestanding GaN substrate by NH{sub 3}-source molecular beam epitaxy. The homoepitaxial GaN film exhibited A- and B-excitonic emissions at 8 K, which obeyed the polarization selection rules. For Al{sub x}Ga{sub 1-x}N overlayers, the m-plane tilt mosaic along c-axis was the same as the substrate as far as coherent growth was maintained (x{<=}0.25). However, it became more severe than along the a-axis for lattice-relaxed films (x{>=}0.52). The results are explained in terms of anisotropic lattice and thermal mismatches between the film and the substrate. Nonetheless, all the Al{sub x}Ga{sub 1-x}N films exhibited a near-band-edge emission peak and considerably weak deep emission at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photoelectrochemical etching of p-type GaN heterostructures

We have developed a method for photoelectrochemical etching of p-type semiconductors, including GaN, that relies on the built-in bandbending already inherent to optical devices. Electron-hole pairs are generated by filtered light in a buried small bandgap layer, and a pn junction separates the charge. Electrons are sent into the n-type layer, where they are extracted, and holes to the surface, where they participate in etching reactions. This technique is rapid and inexpensive, and it requires no applied bias or elevated temperatures. This technique has widespread applications to GaN optical devices where ion-damage-free etching or wide tunability of etch parameters is desired.

36 MATERIALS SCIENCE↗

High responsivity A-plane GaN-based metal-semiconductor-metal photodetectors for polarization-sensitive applications

The fabrication and characterization of metal-semiconductor-metal polarization-sensitive photodetectors based on A-plane GaN grown on R-plane sapphire substrates is reported. These photodetectors take advantage of the in-plane crystal anisotropy, which results in linear dichroism near the band gap energy. The high resistivity of the A-plane GaN material leads to extremely low dark currents. For an optimized finger spacing of 1 {mu}m, dark current density and responsivity at 30 V are 0.3 nA/mm{sup 2} and 2 A/W, respectively. A maximum polarization sensitivity ratio of 1.8 was determined. In a differential configuration, the full width at half maximum of the polarization-sensitive region is 8.5 nm.

36 MATERIALS SCIENCE↗

Polarization and temperature dependence of photoluminescence of m-plane GaN grown on {gamma}-LiAlO{sub 2} (100) substrate

We investigated the polarization and temperature dependence of photoluminescence (PL) of m-plane GaN grown on {gamma}-LiAlO{sub 2} (100) substrate. The calculated electronic band structure with kp Hamiltonian points out the energy splitting as well as polarization selection originate from the m-plane GaN epilayer under anisotropic strain. The polarization-angle dependence PL spectra are found to be selected from in-plane x- and z-polarized emission, corresponding to T{sub 1} and T{sub 2} transition. And the intensity distribution of the fitting peaks satisfies the Malus' law. An S-shape energy evolution of near band edge peak on temperatures is observed, which originates from the transition between the localized holes and electrons in triangular potentials induced by basal stacking faults.

36 MATERIALS SCIENCE↗

Alpha particle detection with GaN Schottky diodes

Ni/GaN Schottky diode radiation detectors were fabricated on 3-mum-thick unintentionally doped n-GaN films grown by molecular beam epitaxy (MBE) and metal organic chemical vapor deposition (MOCVD) and on 12-mum-thick undoped n-GaN layers prepared by epitaxial lateral overgrowth (ELOG). The reverse current of all detector structures was <10{sup -9} A for bias voltages necessary for detector operation, with the level of background donor doping of <10{sup 15} cm{sup -3}. With this doping level the space charge region of the Schottky diode could be extended to the entire thickness of the films. The charge collection efficiency of the detectors was close to 100% for MOCVD and ELOG detectors for alpha-particles with range comparable to the thickness of the layer. Electrical properties and deep trap spectra were also studied. The collection efficiency decreased when the concentra-tion of deep electron traps, particularly E{sub c}-0.6 eV traps, increased in MBE grown films.

36 MATERIALS SCIENCE↗

A growth diagram for plasma-assisted molecular beam epitaxy of GaN nanocolumns on Si(111)

The morphology of GaN samples grown by plasma-assisted molecular beam epitaxy on Si(111) was systematically studied as a function of impinging Ga/N flux ratio and growth temperature (730-850 deg. C). Two different growth regimes were identified: compact and nanocolumnar. A growth diagram was established as a function of growth parameters, exhibiting the transition between growth regimes, and showing under which growth conditions GaN cannot be grown due to thermal decomposition and Ga desorption. Present results indicate that adatoms diffusion length and the actual Ga/N ratio on the growing surface are key factors to achieve nanocolumnar growth.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of V/III flux ratio on luminescence properties and defect formation of Er-doped GaN

Erbium-doped GaN samples grown with different V/III ratios through gas source molecular beam epitaxy were prepared to investigate the influence of the V/III ratio on the defect formation and the optical activity of the Er-related luminescence center. Obvious V/III ratio dependence was observed in photoluminescence measurement. Positron annihilation spectroscopy measurements suggested that V{sub Ga}-V{sub N} vacancy-complexes formed in these samples and that the V{sub N}/V{sub Ga} ratio depended on the V/III ratio. The generation of Er-V{sub N} defect complexes, which act as high optical active luminescence centers, is suggested as the cause of improved optical properties of Er-doped GaN grown with a lower V/III ratio.

36 MATERIALS SCIENCE↗