Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GROUND WATER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Lidar measurements of tropospheric gases

Measurements of pollutants and water vapor in the troposphere using the differential absorption lidar (DIAL) technique are described. Measurements are made of sulfur dioxide in power plant plumes with a mobile DIAL system operated near 300 nm. Comparisons of sulfur dioxide concentrations determined with the DIAL system and in-stack monitors are found to be in agreement to within 18%. Vertical water vapor profiles with a ground-based lidar system are measured using the water vapor absorption line at 724.3 nm. Rawinsonde and DIAL water vapor profile data are shown to agree within 10% to an altitude of 2.5 km. Simulations are discussed for airborne DIAL measurements of sulfur dioxide, water vapor, and nitrogen dioxide.

Browell, E. V.↗
NASA NTRS1997

Ground-Based GPS Sensing of Azimuthal Variations in Precipitable Water Vapor

Current models for troposphere delay employed by GPS software packages map the total zenith delay to the line-of-sight delay of the individual satellite-receiver link under the assumption of azimuthal homogeneity. This could be a poor approximation for many sites, in particular, those located at an ocean front or next to a mountain range. We have modified the GIPSY-OASIS II software package to include a simple non-symmetric mapping function (MacMillan, 1995) which introduces two new parameters.

azimuthal homogeneity zenith troposphere delay↗
NASA NTRS1975

The vertical distribution of soluble gases in the troposphere

The thermodynamic properties of several water-soluble gases are reviewed to determine the likely effect of the atmospheric water cycle on their vertical profiles. It is found that gaseous HCl, HNO3, and HBr are sufficiently soluble in water to suggest that their vertical profiles in the troposphere have a similar shape to that of water vapor. It is predicted that HCl, HNO3, and HBr exhibit a steep negative gradient with altitude roughly equal to the altitude gradient of water vapor. Therefore, ground-based sources of inorganic chlorine, odd nitrogen, and inorganic bromine compounds are not likely to affect the stratosphere directly in the mean. Calculations also show that while SO2 and NH3 are significantly affected by the atmospheric water cycle, their abundances may not decrease with altitude as rapidly as does that of water vapor.

Stedman, D. H.↗
NASA NTRS1999

The Meteorological Experiment on the Mars Surveyor '98 Polar Lander

When it lands on Mars on December 3, 1999, the Mars Surveyor '98 Mars Polar Lander (MPL) will provide the first opportunity to make in-situ measurements of the near-surface weather climate, and volatile inventory in the Martian south polar region. To make the most of this opportunity, the MPL's Mars Volatiles and Climate Surveyor (MVACS) payload includes the most comprehensive complement of meteorological instruments ever sent to Mars. Like the Viking and the Mars Pathfinder Lander, the MVACS Meteorological (Met) package includes sensors for measuring atmospheric pressures, temperatures, and wind velocities. This payload also includes a 2-channel tunable diode laser spectrometer for in-situ measurements of the atmospheric water vapor abundance near the ground, and improved instruments for measuring the relative abundances of oxygen isotopes (in water vapor and CO2) and a surface temperature probe for measuring the surface and sub-surface temperatures. This presentation will provide a brief overview of the environmental conditions anticipated at the surface in the Martian regions. We will then provide an over-view of the MVACS Met instrument and describe the MET sensors in detail, including their principle of operation, range, resolution, accuracy, sampling strategy, heritage, accommodation on the Lander, and their control and data handling system. Finally, we will describe the operational sequences, resource requirements, and the anticipated data volumes for each of the Met instruments.

Crisp, D.↗
DOE OSTI2020

Hydrologic Model Files (PRMS) for Historical Conditions in the East River Watershed, Colorado between 1987-2019

The data package contains model input and output file for the East River watershed (85 km2) located in the headwaters of the Colorado River. The model is the U.S. Geological Survey (USGS) Precipitation-Modeling Runoff System (PRMS) for the historical, or baseline, condition (1987-2019) to assess the efficiency of summer monsoon rains to generate streamflow. The finite difference grid resolution is 100 m with elevations resampled from the USGS National Elevation Dataset. LANDFIRE raster data is used to derive parameters of dominant cover type, summer and winter cover density, canopy interception characteristics for snow and rain and transmission coefficient for shortwave radiation. Climate forcing uses minimum and maximum daily temperature lapse rates defined by the two Snow Telemetry (SNOTEL) stations located in the vicinity of the East River adjusted for aspect. Schofield SNOTEL snowfall is spatially distributed using LiDAR derived snow depth observations from the Airborne Snow Observatory (ASO) flown 4 April 2016. Snow depths are converted to snow water equivalent based on ground surveys and density modeling. Rainfall is spatially distributed using the monthly Parameter-elevation Relationships on Independent Slopes Model 30-year monthly averages. Simulated solar radiation is calibrated to match weather station observations. Model verification of snow water equivalent (SWE) accumulation and ablation relies on the 2018 and 2019 ASO maps and weather station snow depth. The data package contains model input files in text format, model documentation in pfd and a readme.txt file to help users understand the file structure to run the program.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1988

Ground vortex flow field investigation

Flow field investigations were conducted at the NASA Ames-Dryden Flow Visualization Facility (water tunnel) to investigate the ground effect produced by the impingement of jets from aircraft nozzles on a ground board in a STOL operation. Effects on the overall flow field with both a stationary and a moving ground board were photographed and compared with similar data found in other references. Nozzle jet impingement angles, nozzle and inlet interaction, side-by-side nozzles, nozzles in tandem, and nozzles and inlets mounted on a flat plate model were investigated. Results show that the wall jet that generates the ground effect is unsteady and the boundary between the ground vortex flow field and the free-stream flow is unsteady. Additionally, the forward projection of the ground vortex flow field with a moving ground board is one-third less than that measured over a fixed ground board. Results also showed that inlets did not alter the ground vortex flow field.

Kuhn, Richard E.↗
NASA NTRS2005

Analysis of Raman Lidar and radiosonde measurements from the AWEX-G field campaign and its relation to Aqua validation

Early work within the Aqua validation activity revealed there to be large differences in water vapor measurement accuracy among the various technologies in use for providing validation data. The validation measurements were made at globally distributed sites making it difficult to isolate the sources of the apparent measurement differences among the various sensors, which included both Raman lidar and radiosonde. Because of this, the AIRS Water Vapor Experiment-Ground (AWEX-G) was held in October - November, 2003 with the goal of bringing validation technologies to a common site for intercomparison and resolution of the measurement discrepancies. Using the University of Colorado Cryogenic Frostpoint Hygrometer (CFH) as the water vapor reference, the AWEX-G field campaign resulted in new correction techniques for both Raman lidar, Vaisala RS80-H and RS90/92 measurements that significantly improve the absolute accuracy of those measurement systems particularly in the upper troposphere. Mean comparisons of radiosondes and lidar are performed demonstrating agreement between corrected sensors and the CFH to generally within 5% thereby providing data of sufficient accuracy for Aqua validation purposes. Examples of the use of the correction techniques in radiance and retrieval comparisons are provided and discussed.

Whiteman, D. N.↗
NASA NTRS2006

Analysis of Raman Lidar and Radiosonde Measurements from the AWEX-G Field Campaign and Its Relation to Aqua Validation

Early work within the Aqua validation activity revealed there to be large differences in water vapor measurement accuracy among the various technologies in use for providing validation data. The validation measurements were made at globally distributed sites making it difficult to isolate the sources of the apparent measurement differences among the various sensors, which included both Raman lidar and radiosonde. Because of this, the AIRS Water Vapor Experiment-Ground (AWEX-G) was held in October-November 2003 with the goal of bringing validation technologies to a common site for intercomparison and resolving the measurement discrepancies. Using the University of Colorado Cryogenic Frostpoint Hygrometer (CFH) as the water vapor reference, the AWEX-G field campaign permitted correction techniques to be validated for Raman lidar, Vaisala RS80-H and RS90/92 that significantly improve the absolute accuracy of water vapor measurements from these systems particularly in the upper troposphere. Mean comparisons of radiosondes and lidar are performed demonstrating agreement between corrected sensors and the CFH to generally within 5% thereby providing data of sufficient accuracy for Aqua validation purposes. Examples of the use of the correction techniques in radiance and retrieval comparisons are provided and discussed.

Whiteman, D. N.↗
DOE OSTI2021

Modeling Liquid Water by Climbing up Jacob’s Ladder in Density Functional Theory Facilitated by Using Deep Neural Network Potentials

Within the framework of Kohn–Sham density functional theory (DFT), the ability to provide good predictions of water properties by employing a strongly constrained and appropriately normed (SCAN) functional has been extensively demonstrated in recent years. Here, we further advance the modeling of water by building a more accurate model on the fourth rung of Jacob’s ladder with the hybrid functional, SCAN0. In particular, we carry out both classical and Feynman path-integral molecular dynamics calculations of water with the SCAN0 functional and the isobaric–isothermal ensemble. To generate the equilibrated structure of water, a deep neural network potential is trained from the atomic potential energy surface based on ab initio data obtained from SCAN0 DFT calculations. For the electronic properties of water, a separate deep neural network potential is trained by using the Deep Wannier method based on the maximally localized Wannier functions of the equilibrated trajectory at the SCAN0 level. The structural, dynamic, and electric properties of water were analyzed. The hydrogen-bond structures, density, infrared spectra, diffusion coefficients, and dielectric constants of water, in the electronic ground state, are computed by using a large simulation box and long simulation time. For the properties involving electronic excitations, we apply the GW approximation within many-body perturbation theory to calculate the quasiparticle density of states and bandgap of water. Compared to the SCAN functional, mixing exact exchange mitigates the self-interaction error in the meta-generalized-gradient approximation and further softens liquid water toward the experimental direction. For most of the water properties, the SCAN0 functional shows a systematic improvement over the SCAN functional. However, some important discrepancies remain. The H-bond network predicted by the SCAN0 functional is still slightly overstructured compared to the experimental results.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2020

Direct Numerical Simulation of Fog Formation Within the Surface Layer

We investigate the effects of shear-driven turbulence on fog formation in the stably stratified surface layer, using recent direct numerical simulations (DNS) of dry and moist open-channel flows. A constant cooling rate applied at the ground mimics longwave radiative cooling, leading to either turbulent (weakly stable) or laminar (very stable) flows. The transition of the Obukhov, Ozmidov and buoyancy length scales are investigated for different cooling rates and Reynolds numbers. Compared to the dry case, the condensation of liquid water in the moist case supports slightly higher cooling rates before leading to turbulence collapse. In the very stable moist cases, runaway cooling leads to substantial condensation of liquid water close to the ground and fog (visibility less than 1 km) results over much of the domain. In the weakly stable cases, turbulent mixing narrowly yields visibilities of 1 km close to the ground over a similar time period. Despite the idealised nature of the system, the present results suggest that turbulence impedes, although will not necessarily inhibit, fog formation.

Teixeira, Joao↗
NASA NTRS2024

Jefferson County Ecological Conservation: Quantifying the Effects of Hydrologic Restoration in the Camas National Wildlife Refuge and Mud Lake Wildlife Management Area

Wetlands in the Camas National Wildlife Refuge and Mud Lake Wildlife Management Area, a rare landscape feature in the Intermountain West, are crucial for migratory birds along the Pacific Flyway, yet these wetlands have experienced a noticeable decline in extent and inundation over the last 40+ years. Partners at the U.S. Fish and Wildlife Service and Idaho Department of Fish and Game have ongoing restoration efforts that are yet to be quantified. To assist these partners, we used NASA Earth observations to quantify change in wetland extent and determine if the restoration projects met the intended impact. The QA_PIXEL band from Landsat 5 Thematic Mapper (TM) and Landsat 8 Operational Land Imager (OLI) was used to identify water. Landsat 8 OLI imagery was also used for classifying landcover in ArcGIS Pro for 2016 and 2020 and to forecast landcover in 2060 using TerrSet’s Land Change Modeler. We also compared lidar data from 2011 and 2019 to detect changes in vegetation height, ground elevation, and surface water levels, and Sentinel-2 Multispectral Instrument (MSI) imagery to detect changes in vegetation health. Classification results indicated overall accuracies over 84% and Kappa indices above 0.80, well surpassing random classification performance. From 2016 to 2020 our classifications showed an 825 acre increase in wetland extent, and our forecasted 2060 model showed a 2795 acre decrease. Combining our partners’ knowledge of the area with our analyses, we created a remote sensing workflow to enhance future monitoring and decision-making. This study demonstrated the feasibility of NASA Earth observations in quantifying wetlands, informing restoration projects, and supporting avian conservation.

Cassidy Bromka↗
DOE OSTI2023

Validation of the Cloud_CCI (Cloud Climate Change Initiative) cloud products in the Arctic

The role of clouds in the Arctic radiation budget is not well understood. Ground-based and airborne measurements provide valuable data to test and improve our understanding. However, the ground-based measurements are intrinsically sparse, and the airborne observations are snapshots in time and space. Passive remote sensing measurements from satellite sensors offer high spatial coverage and an evolving time series, having lengths potentially of decades. However, detecting clouds by passive satellite remote sensing sensors is challenging over the Arctic because of the brightness of snow and ice in the ultraviolet and visible spectral regions and because of the small brightness temperature contrast to the surface. Consequently, the quality of the resulting cloud data products needs to be assessed quantitatively. In this study, we validate the cloud data products retrieved from the Advanced Very High Resolution Radiometer (AVHRR) post meridiem (PM) data from the polar-orbiting NOAA-19 satellite and compare them with those derived from the ground-based instruments during the sunlit months. The AVHRR cloud data products by the European Space Agency (ESA) Cloud Climate Change Initiative (Cloud_CCI) project uses the observations in the visible and IR bands to determine cloud properties. The ground-based measurements from four high-latitude sites have been selected for this investigation: Hyytiälä (61.84°N, 24.29°E), North Slope of Alaska (NSA; 71.32°N, 156.61°W), Ny-Ålesund (Ny-Å; 78.92°N, 11.93°E), and Summit (72.59°N, 38.42°W). The liquid water path (LWP) ground-based data are retrieved from microwave radiometers, while the cloud top height (CTH) has been determined from the integrated lidar–radar measurements. The quality of the satellite products, cloud mask and cloud optical depth (COD), has been assessed using data from NSA, whereas LWP and CTH have been investigated over Hyytiälä, NSA, Ny-Å, and Summit.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1997

Cabauw Experimental Results from the Project for Intercomparison of Land-Surface Parameterization Schemes

In the Project for Intercomparison of Land-Surface Parameterization Schemes phase 2a experiment, meteorological data for the year 1987 from Cabauw, the Netherlands, were used as inputs to 23 land-surface flux schemes designed for use in climate and weather models. Schemes were evaluated by comparing their outputs with long-term measurements of surface sensible heat fluxes into the atmosphere and the ground, and of upward longwave radiation and total net radiative fluxes, and also comparing them with latent heat fluxes derived from a surface energy balance. Tuning of schemes by use of the observed flux data was not permitted. On an annual basis, the predicted surface radiative temperature exhibits a range of 2 K across schemes, consistent with the range of about 10 W/m in predicted surface net radiation. Most modeled values of monthly net radiation differ from the observations by less than the estimated maximum monthly observational error (+/- 10 W/sq m). However, modeled radiative surface temperature appears to have a systematic positive bias in most schemes; this might be explained by an error in assumed emissivity and by models' neglect of canopy thermal heterogeneity. Annual means of sensible and latent heat fluxes, into which net radiation is partitioned, have ranges across schemes of 30 W/sq m and 25 W/sq m, respectively. Annual totals of evapotranspiration and runoff, into which the precipitation is partitioned, both have ranges of 315 mm. These ranges in annual heat and water fluxes were approximately halved upon exclusion of the three schemes that have no stomatal resistance under non-water-stressed conditions. Many schemes tend to underestimate latent heat flux and overestimate sensible heat flux in summer, with a reverse tendency in winter. For six schemes, root-mean-square deviations of predictions from monthly observations are less than the estimated upper bounds on observation errors (5 W/m for sensible beat flux and 10 W/m for latent heat flux). Actual runoff at the site is believed to be dominated by vertical drainage to ground water, but several schemes produced significant amounts of runoff as overland flow or interflow. There is a range across schemes of 184 mm (40% of total pore volume) in the simulated annual mean root-zone soil moisture. Unfortunately, no measurements of soil moisture were available for model evaluation. A theoretical analysis suggested that differences in boundary conditions used in various schemes are not sufficient to explain the large variance in soil moisture. However, many of the extreme values of soil moisture could be explained in terms of the particulars of experimental setup or excessive evapotranspiration.

Chen, Tian Hong↗
DOE OSTI2024

Frost Tables, NGEE Areas B, C and D, Utqiagvik (Barrow), Alaska, 2012-2014

This dataset represents spatially intensive thaw depth surveys with individual point measurements spaced ~0.5 m apart. The three ~10x10m grids cover an ice wedge and a portion of its two neighboring polygons. The data contain thaw depth, frost table elevation, ground surface elevation, active layer depth and surface water inundation across three seasons (2012, 2013 and 2014) at Utqiagvik (Barrow) NGEE Areas B, C and D. There are a total of 69 extracted files separated by month, year, and area. The data were originally provided in excel workbooks, these files have been preserved within the zip "Original_Files." The files were transformed for archiving with images pulled out into JPEGs, data preserved as CSV files and some methodological information preserved as TXT files. Some functions, features, and formatting were lost during the transformation. Missing data were defined with blank cells. Additional documentation can be found in files labelled with "information.txt" file endings.The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research.The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska.Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).[2024-07-15] Renamed BEO_Thaw_Depth_Frost_Table_Area_*_*_*.csv, BEO_Thaw_Depth_Frost_Table_Area_*_*_*_Plot_1.JPEG, and BEO_Thaw_Depth_Frost_Table_Area_*_*_*_Plot_2.JPEG names that had E or L to be Early or Late. Renamed BEO_Thaw_Depth_Frost_Table_Area_*_*_*_Plot_1.JPEG, BEO_Thaw_Depth_Frost_Table_Area_*_*_*_Plot_2.JPEG, and BEO_Thaw_Depth_Frost_Table_Area_*_information_Plot_1.JPEG to BEO_Thaw_Depth_Frost_Table_Area_*_*_*_Gridpoints.JPEG, BEO_Thaw_Depth_Frost_Table_Area_*_*_*_3Dgraphic.JPEG, and BEO_Thaw_Depth_Frost_Table_Area_*_information_LiDAR_DEM.JPEG, respectively. Updated BEO_Thaw_Depth_Frost_Table_flmd.csv file to reflect above updates.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1994

Development of practical multiband algorithms for estimating land-surface temperature from EOS/MODIS data

A practical multiband, hierarchical algorithm for estimating land-surface temperature from NASA's future Earth Observing System (EOS) instruments Moderate Resolution Imaging Spectroradiometer (MODIS) and Advance Spaceborne Thermal Emission and Reflection Radiometer (ASTER) is developed through comprehensive, accurate, radiative transfer simulations at moderate spectral steps of 1-5/cm for wide ranges of atmospheric and surface conditions. The algorithm will accept empirical or estimated information about the surface emissivity and reflectivity and the atmospheric temperature and water-vapor profiles. Ground-based and aircraft measurements are necessary to validate and improve the algorithm and to establish its quality. Its accuracy depends on the calibration accuracy of thermal infrared data, uncertainties in surface heterogeneity, and temperature-dependent atmospheric absorption coefficients. Better knowledge of land-surface spectral emissivities and more accurate coefficients for atmospheric molecular band absorption and water vapor continuum absorption are needed to develop global land-surface temperature algorithms accurate to 1-2 K.

Dozier, J.↗
NASA NTRS1980

Solar hot water system installed at Day's Lodge, Atlanta, Georgia

The solar energy hot water system installed in the Days Inns of America, Inc., Atlanta, Georgia is described. This system provides for 81 percent of the total hot water demand. There are two separate systems, each serving one building of the lodge (total of 65 suites). The entire system contains only potable city water. The 1024 square feet of Grumman Sunstream Model 332 liquid flat plate collectors and the outside piping drain whenever the collector plates approach freezing or when power is interrupted. Solar heated water from the two above ground cement lined steel tanks (1000 gallon tank) is drawn into the electric Domestic Hot Water (DHW) tanks as hot water is drawn. Electric resistance units in the DHW tanks top off the solar heated water, if needed, to reach thermostat setting.

Source record↗
NASA NTRS2003

Alumina Volatility in Water Vapor at Elevated Temperatures: Application to Combustion Environments

The volatility of alumina in high temperature water vapor was determined by measuring weight loss of sapphire coupons at temperatures between 1250 and 1500 C, water vapor partial pressures between 0.15 and 0.68 atm in oxygen, at one atmosphere total pressure, and a gas velocity of 4.4 centimeters per second. The variation of the volatility with water vapor partial pressure was consistent with Al(OH)3(g) formation. The enthalpy of reaction to form Al(OH)3(g) from alumina and water vapor was found to be 210 plus or minus 20 kJ/mol. Surface rearrangement of ground sapphire surfaces increased with water vapor partial pressure, temperature and volatility rate. Recession rates of alumina due to volatility were determined as a function of water vapor partial pressure and temperature to evaluate limits for use of alumina in long term applications in combustion environments.

Opila, Elizabeth J.↗