Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Field stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Molecular-resolution imaging of ice crystallized from liquid water by cryogenic liquid-cell TEM

Despite the ubiquity of ice, a molecular-resolution image of nanoscopic defects or microstructures in ice crystallized from liquid water has never been obtained. This is mainly due to the difficulties in preparing and preserving crystalline ice samples that can survive under high-resolution imaging conditions. Here, we report the stabilization and Å-resolution electron imaging of ice Ih crystallized from liquid water by developing cryogenic liquid-cell transmission electron microscopy (CRYOLIC-TEM). We combine lattice mapping with molecular dynamics simulations to reveal that ice formation is highly tolerant to nanoscale defects such as misoriented subdomains and trapped gas bubbles, which are stabilized by molecular-scale structural motifs. Importantly, bubble surfaces adopt low-energy nanofacets and create negligible strain fields in the surrounding crystal. These bubbles can dynamically nucleate, grow, migrate, dissolve, and coalesce under electron irradiation and be monitored in situ near a steady state. This work improves our understanding of water crystallization behaviors at a molecular spatial resolution.

Materials science↗
DOE OSTI2026

Non-equilibrium reducing flame aerosol process to create supported high-entropy alloy nanoparticles

High-entropy alloy (HEA) nanomaterials provide opportunities and property combinations for energy and electronic applications, but their practical synthesis faces challenges of elemental immiscibility, metal reducibility, and particle aggregation during their synthesis. Herein, we report a broadly applicable non-equilibrium, scalable, and in-situ reducing flame aerosol process for synthesis of supported HEA nanoparticles. This versatile process can directly load a high concentration of 2 ~ 4 nm HEA nanoparticles on various 1- to 3-dimensional supports. Notably, simultaneous formation of HEA nanoparticles and a mesoporous silica support was successfully realized in a single step. Exploration of this process demonstrates the role of kinetics and entropy on decreasing alloy particle size and altering the reducibility of elements. We propose an entropy-induced reduction mechanism to incorporate oxidizable elements into HEAs, which extends the compositional space of HEA nanoparticles. As a representative catalytic application, we present a RuPdOsIrPt/graphene electrocatalyst with high activity and stability for hydrogen oxidation reaction. Our findings open horizons for high-performance HEA design and applications in diverse fields such as catalysis, electrochemistry, and sensing.

organic↗
DOE OSTI2023

Inter-Area Oscillation Damping with Type-5 Wind Power Plant

This paper investigates the potential of using brushless excitation (BLE) for not only riding through the fault but also to damp inter-area power oscillation with the help of a synchronous generator (SG) used in Type 5 Wind Power Plant (WPP). In BLE, an auxiliary synchronous generator (ASG) behaving like an exciter is coupled and driven by the rotor of the main SG. The BLE's field current's ASG is fed by two separate loops of the automatic voltage regulator (AVR) and power system stabilizer (PSS). The AVR system implements a control loop to regulate the generator terminal voltage, VT. For the PSS, the kinetic energy of the wind turbine is utilized according to the estimated rotational speed of the synchronous generator shaft of the SG. It may mitigate the necessity of any curtailment of active power for damping. The effectiveness of the proposed control scheme is verified with a three-phase short circuit fault in a two-area power system.

brushless↗
DOE OSTI2026

Thermodynamics of grain-boundary phases

The past decade has seen a significant increase in research efforts aimed at understanding the thermodynamics of low-dimensional phases existing in many materials systems, ranging from two-dimensional materials to core regions of extended defects in crystalline solids. We review the current status of theoretical, computational, and experimental research on the “defect phases,” focusing on grain boundaries (GBs) in elemental and multicomponent polycrystalline materials. After reviewing the generalized concept of a phase of any dimensionality, we discuss recent progress in atomistic computer simulations of GB phase transformations and phase coexistences, including the observation of one-dimensional defects separating GB phases (defects in defects). Computational predictions compare well with experimental observations of multiple GB phases and segregation-induced phase transformations. An intriguing open question of GB thermodynamics is whether the GB free energy can be driven to a zero value by increasing solute segregation. We review recent efforts to understand this ultimate thermodynamic stabilization of GB phases and the possible polycrystalline microstructures that may arise. An outlook for future research in the field is discussed.

Materials science↗
DOE OSTI2020

A Virtual Element Method for the Full MHD system

In this manuscript we present a novel discretization for the incompressible MHD system. Our approach follows the framework of the Virtual Element Method and offers two main advantages. The method can be implemented in unstructured meshes making it highly versatile and capable of handling a wide array of problems involving interfaces, free-boundaries or adaptive refinements on the mesh. The second advantage involves the divergence of the magnetic field, our approach guarantees that it remains solenoidal. We include a theoretical proof of the condition on the magnetic field as well as energy estimates and a well-posedness study. The latter sheds light as to the stability properties of the method.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Coastal Wetland Carbon Processes in a Warmer Climate (Final Report)

Coastal wetlands are global hotspots of carbon storage. Marshes, mangroves, and seagrass meadows account for about half of the total marine soil carbon budget and bury carbon at rates roughly equivalent to terrestrial forests despite occupying just 2.5% of Earth’s land area. Coastal wetlands have recently been recognized as important for storing carbon, but the future sink strength and carbon stock stability of these systems is uncertain because global change drivers such as temperature and elevated CO 2 disturb the complex ecology that drives high rates of soil carbon sequestration. The dynamics of coastal wetland carbon pools are not presently represented in earth system models. Our goals are to understand the influence of warming and elevated CO 2 on C cycling and to forecast the stability of tidal wetland soil carbon pools at the terrestrial-aquatic interface. We designed and implemented a novel field manipulation of elevated CO 2 and temperature and operated it from 2016 to 2020. We learned that plant communities and microbial communities respond differently to rising temperature, and that the net effects of these responses means that a modest amount of warming will increase tidal marsh carbon sequestration, while warming above that level will diminish the potential for additional carbon sequestration. In mathematical terms the system showed non-linear responses which are important for building forecast models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Inter-Area Oscillation Damping with Type-5 Wind Power Plant: Preprint

This paper investigates the potential of using brushless excitation (BLE) for not only riding through the fault but also to damp inter-area power oscillation with the help of a synchronous generator (SG) used in Type 5 Wind Power Plant (WPP). In BLE, an auxiliary synchronous generator (ASG) behaving like an exciter is coupled and driven by the rotor of the main SG. The BLE's field current's ASG is fed by two separate loops of the automatic voltage regulator (AVR) and Power System Stabilizer (PSS). The AVR system implements a control loop to regulate the generator terminal voltage, VT. For the PSS, the kinetic energy of the wind turbine is utilized according to the estimated rotational speed of the synchronous generator shaft of the SG. It mitigates the necessity of any curtailment of active power for damping. The effectiveness of the proposed control scheme is verified with a three-phase short circuit fault in a two-area power system.

brushless↗
DOE OSTI2025

Report on the Assessment of Ion Irradiations on High Entropy Alloys

Idaho National Laboratory (INL) initiated a joint international effort with the Czech Republic to explore the feasibility of manufacturing High Entropy Alloys for high-temperature nuclear applications using Additive Manufacturing. This effort was funded at INL by the United States Department of Energy’s Office of Nuclear Energy under the Advanced Reactor Technologies and Advanced Materials and Manufacturing Technologies (AMMT) Program. The High Entropy Alloys were specifically designed for the corrosive and irradiation environments as experienced in gas fast reactors, molten salt reactors, and fusion power. These alloys were manufactured by multiple processes to determine the impact of manufacturing processes on the performance of the alloys in corrosive and irradiation environments. Preliminary results show that MoNbTiV and MoNbTi alloys exhibit no degradation after multiple corrosion tests. These MoNbTiV and MoNbTi alloys were also evaluated after irradiation experiments were conducted at the Michigan Ion Beam Laboratory at the University of Michigan, which is the focus of this milestone report. For these irradiation experiments, the MoNbTiV and MoNbTi alloys manufactured by arc melting and Electric Field Assisted Sintering (EFAS) were tested at 500 C at a dose of 30 dpa to evaluate the microstructural stability and decomposition.

36 - MATERIALS SCIENCE↗
DOE OSTI2024

Stability of the first-order character of phase transition in HoCo 2

HoCo 2 exhibits a giant magnetocaloric (MC) effect at its first-order magnetostructural phase transition around 77 K, and understanding the thermodynamic nature of this transition in response to external magnetic fields is crucial for its MC applications. In this study, we present a comprehensive investigation of specific heat and magnetization measurements of HoCo 2 under varying magnetic fields. The specific heat measurements qualitatively indicate a transformation from first- to second-order behavior of this phase transition at higher magnetic fields. However, analysis of the power-law dependence of the magnetic entropy change (Δ S M ∝H n ) and the breakdown of universal behavior in the temperature dependence of Δ S M suggest that the first-order nature remains intact, even up to 7 T. This stability of the first-order nature is further manifested through the distinctive non-linear behavior of modified Arrott plots, with a negative slope in the 6–7 T range.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Critical current and stability tests of Nb 3 Sn for LBNL CCT magnet project

The Nb 3 Sn wires received from LBNL include the original round wires as well as the extracted wires from Rutherford cables. Total of 12 samples were prepared and heat treated. Five of them were tested for electric field versus current (E-I), among them 4 samples were further tested for electric field versus magnetic field (E-H). E-I traces were measured in magnetic field between 5 T and 8 T at 4.2 K. The critical currents of these sample are between 924 A and 993 A at 5 T. E-H measurements were performed at currents between 900 and 1500 A at 4.2 K. The stability currents, which is defined as the maximum current without quench during the E-H test, are determined to be between 1100 A and 1400 A. A separate Excel file presenting all the critical current and E-H curves is attached.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Strain effects on stability of topological ferroelectric polar configurations in (PbTiO3) n /(SrTiO3) n superlattices

The (PbTiO3)n/(SrTiO3)n (PTO/STO) superlattice system has been shown to exhibit interesting topological phases (e.g., vortices and skyrmions) in addition to normal ferroelectric domain states. Existing studies are mostly focused on the dependence of topological polar distributions and properties of PTO/STO superlattice on its periodicity. Here, we study the strain effect on the topological phase transitions and ferroelectric domain structures employing phase-field simulations. We summarized in an isotropic strain (in-plane misfit strain along the x direction is equal to that along the y direction) periodicity phase diagram displaying the stability regions of different polar topological states, including normal ferroelectric twins, vortices, skyrmions, and mixtures of vortices and twins. We also analyzed the polarization configurations under anisotropic in-plane strains (in-plane misfit strain along the x direction is not equal to that along the y direction) and demonstrated that the strain anisotropy can be used to tune the directions of vortex arrays along either the [100] pc or [010] pc directions or labyrinth vortex arrays. This work offers guidance to manipulating polar structures in the PTO/STO superlattices via strain engineering.

Physics↗
DOE OSTI2025

Stabilization of magnetic bubbles in [Ni/Co]n multilayers on an oxygen-reconstructed Nb(110) surface via an ultra-thin Cu interlayer

Magnetic thin films hosting topological spin textures, such as magnetic skyrmions, hold high potential for breakthroughs in the field of spintronics, due to good scalability and energy efficiency. Novel computational architectures such as memory-in-logic devices rely on material platforms able to host those topological spin textures. Furthermore, recently proposed designs of novel quantum information technologies are based on heterostructures where topological spin textures are in direct proximity to a superconducting layer. Here, we demonstrate the stabilization of out-of-plane magnetic bubbles in highly ordered [Ni/Co]n multilayers on a Nb(110) single crystal. This is achieved without the need for the removal of the well-known Nb(110)-oxide surface reconstruction, due to the introduction of an ultra-thin Cu interlayer in between the Nb substrate and the magnetic multilayer. The Cu interlayer generates a well-ordered hexagonal surface, which is key for the epitaxial growth of the [Ni/Co]n multilayers hosting the desired out-of-plane anisotropy. The magnetic ground state of the prepared material stacks is directly imaged via spin-polarized low-energy electron microscopy, revealing the presence of magnetic bubble domains with lateral sizes as small as 450 nm.

Dibajeh, Ahmad↗
DOE OSTI2020

Orientation-dependent stabilization of MgCr 2 O 4 spinel thin films

AB 2 O 4 normal spinels with a magnetic B site can host a variety of magnetic and orbital frustrations leading to spin-liquid phases and field-induced phase transitions. Here, we report the epitaxial growth of (111)-oriented MgCr 2 O 4 thin films. By characterizing the structural and electronic properties of films grown along the (001) and (111) directions, the influence of growth orientation has been studied. Despite distinctly different growth modes observed during deposition, the comprehensive characterization reveals no measurable disorder in the cation distribution nor multivalency issue for Cr ions in either orientation. Contrary to a naive expectation, the (111) stabilized films exhibit a smoother surface and a higher degree of crystallinity than (001)-oriented films. The preference in growth orientation is explained within the framework of heteroepitaxial stabilization in connection to a significantly lower (111) surface energy. Furthermore, these findings open broad opportunities in the fabrication of two-dimensional kagome-triangular heterostructures with emergent magnetic behavior inaccessible in bulk crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Infrared Signatures for Phase Identification in Hafnium Oxide Thin Films

Phase identification in HfO 2 -based thin films is a prerequisite to understanding the mechanisms stabilizing the ferroelectric phase in these materials, which hold great promise in next-generation non-volatile memory and computing technology. While grazing-incidence X-ray diffraction is commonly employed for this purpose, it has difficulty unambiguously differentiating between the ferroelectric phase and other metastable phases that may exist due to similarities in the d-spacings, their low intensities, and the overlapping of reflections. Infrared signatures provide an alternative route. However, their use in phase identification remains limited because phase control has overwhelmingly been accomplished via substituents, thereby convoluting infrared signatures between the substituent and the phase changes they induce. Herein, we report the infrared optical responses of three undoped hafnium oxide films where annealing conditions have been used to create films consisting primarily of the ferroelectric polar orthorhombic Pca2 1 , antipolar orthorhombic Pbca, and monoclinic P2 1 /c phases, as was confirmed via transmission electron microscopy (TEM), UVvisible optical properties, and electrical property measurements. Vibrational signatures acquired from synchrotron nano-Fourier transform infrared spectroscopy (nano-FTIR) are shown to be capable of differentiating between the phases in a non-destructive, rapid, and nanoscale manner. The utility of nano-FTIR is illustrated for a film exhibiting an antiferroelectric polarization response. In this sample, it is proven that this behavior results from the Pbca phase rather than the often-cited tetragonal phase. Here, by demonstrating that IRspectroscopy can unambiguously distinguish phases in this material, this work establishes a tool needed to isolate the factors dictating ferroelectric phase stability in HfO 2 -based materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

From Structured Solvents to Hybrid Materials (SS2HM) for Chemically Selective Capture and Electromagnetic Release of CO 2 : Mechanisms, Stability and Interfaces (Final Report)

The goal of this research program was to develop high capacity sorbents amenable for alternative regeneration approaches for direct air capture (DAC) of CO 2 . In particular, the research aimed to develop an understanding of CO 2 binding mechanism, thermal and oxidative stability, and regeneration energetics of functionalized ionic liquids (ILs), deep eutectic solvents (DESs), and porous materials. ILs and DESs are high-dielectric solvents with structural tunability that permits the rational-design for energy-efficient regeneration approaches based on electromagnetic (EM) field and moisture-swing. By further incorporating these solvents into polymeric capsules and other structural supports, multi-scale interfaces for targeted CO 2 and energy transfers were achieved. Aspects related to CO 2 capacity, selectivity, stability, dielectric properties, and binding energies were examined through experimental and computational design to identify molecular descriptors to inform future design of structured solvents and hybrid materials for DAC. Enclosed final report details the key findings, science advancements, and workforce development efforts from this project.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Interfacial Engineering of Metal Chalcogenides‐based Heterostructures for Advanced Sodium‐Ion Batteries

Sodium-ion batteries (SIBs) have become one of the most promising candidates for large-scale energy storage applications. Metal chalcogenides anode materials based on alloying or conversion reactions are widely studied because of their high theoretical capacities and rich redox reactions. However, their intrinsic limitations such as high voltage hysteresis and large volume expansion hinder their further applications. The construction of heterostructures has become an attractive strategy to alleviate the above issues. Here, the formation of built in electric fields (BIEFs) at the heterointerfaces will accelerate the migration of Na + and electrons. Moreover, heterostructures can also enhance the structural stability, generate more active sites and provide additional capacity. It is worth noting that heterointerfacial properties play a significant role in promoting the overall electrochemical performance of the heterostructures. However, a systematic understanding of their interfacial engineering is currently lacking. This article reviews the research progress of metal chalcogenides-based heterostructure anode materials in the near term. First, the definition, classification and the roles of heterostructures are introduced. Second, the detailed research progress of the metal chalcogenide-based heterostructures anodes in SIBs is discussed. Finally, the future prospects and potential research directions of the heterostructures for batteries are discussed.

anode↗
DOE OSTI2024

Ghost states and surface structures of the charge density wave kagome metal ScV 6 Sn 6

In this work, we investigate the high-temperature phase of the kagome metal ScV 6 Sn 6 using scanning tunneling microscopy/spectroscopy (STM/S) and density functional theory calculations. STM topographic images of the cleaved sample reveal two distinct surface terminations: flat islands with Sn termination and trenches terminated by kagome layers with Sn as the outermost atomic layer. STS measurements on the Sn-terminated and kagome-terminated surfaces show significant differences, in particular the presence of large density of states near the Fermi level in the former case. Our first-principles calculations reveal that the charge density on the kagome-terminated surface gives rise to “ghost states” which show intensity away from surface atoms, arising due to hybridization of orbitals above the surface. These states can obscure the intrinsic properties of the surface, potentially leading to misattribution of the surface termination. This underscores the need for careful interpretation in STM studies, especially when discerning surface states of localized states. Understanding the surface structure of this versatile quantum material provides essential information for interpreting surface-sensitive experiments, tailoring material properties, engineering interfaces, and controlling stability and reactivity. This knowledge paves the way for further exploration and potential applications of kagome lattice materials in various fields, including quantum computing, topological physics, and advanced electronic devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Crystal structure and magnetic properties of CeFe 11 M (M = Mo, W)

Tetragonal CeFe 11 Mo (struct. type ThMn 12 , a = 8.529(1) Å, c = 4.766(1) Å, V = 346.68(1) Å 3 ) and novel isostructural CeFe 11 W (a = 8.539(1) Å, c = 4.754(1) Å, V = 346.62(1) Å 3 ) are obtained in bulk, as homogenized single-phase arc-melted alloys. Here, their crystal structures are evaluated by full profile Rietveld analysis of the powder X-ray diffraction patterns which confirm that Ce occupies the 2a atomic site in both cases, whereas atomic disorder is present in the Fe-sublattice, i.e., predominantly on the dumbbell 8i site and minorly on two other sites 8j and 8f. In CeFe 11 Mo the third element, M, is mixed with Fe on the 8i dumbbell site and 8f atomic position, whereas in CeFe 11 W, M is mixed on the 8i and 8j Fe sites. In these bulk CeFe 12-x M x alloys the tetragonal structure persists at lower M content, x < 1 here, in comparison to known similar alloys, with x > 1. Because of the low M content, comparably higher values of mass magnetization and Curie temperature are achieved i.e., CeFe 11 Mo: ϭ s = 104 emu/g (14.7 µ B /f.u.), T c = 420 K and CeFe 11 W: ϭ s = 99 emu/g (16.5 µ B /f.u.), T c = 450 K. Magnetocrystalline anisotropy is uniaxial with anisotropy fields H a ∼ 14.5 and 16.5 kOe, respectively. Based on Curie temperature and magnetic anisotropy enhancements, using tungsten as the stabilizing dopant is more beneficial than molybdenum.

36 MATERIALS SCIENCE↗