Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fiber”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Research plan for the development of optical fiber pressure sensors for nuclear applications

Fiber optic pressure sensors are desirable for nuclear applications because they are low mass/small size, immune to electromagnetic interference, high sensitivity, and have multiplexing and multimodal measurement capabilities. Much research and development has been conducted on developing fiber optic based sensors and they are now considered a class of standard instrumentation in many industries. Specifically, for pressure sensing, a wide range of fiber based sensors have been developed for various pressure ranges and environments. This vast body of research will be leveraged for the development of pressure sensors for nuclear applications. Four pressure measurement scenarios were considered which would benefit from a fiber optic based pressure sensor. These scenarios include pressure measurement in the fuel rod plenum, coolant pressure during LOCA testing, advanced coolant (helium, sodium, molten salt) pressure for flow loop operation, and high pressures resulting for direct fuel-coolant interaction. Each scenario has unique pressure, temperature, and material requirements for the sensor. From a survey of commercially available sensors and a literature review; it has been determined that an extrinsic Fabry-Perot interferometer approach is the most appropriate for the various measurement requirements. The experience and knowledge base for Fabry-Perot interferometers can be leveraged since they are the most common fiber optic based pressure sensors available commercially and found in literature. These pressure sensors rely on the interference of light in a gas filled cavity, which minimizes the impact of radiation induced attenuation and compaction on the measurement, compared to intrinsic sensing techniques. The measurement range of these sensors is based on the stiffness of the diaphragm that deflects under pressure. This allows for a suite of fiber based sensors to be developed by interchanging this diaphragm for the requirements of each application. Key material and design considerations have been identified for the development of a Fabry-Perot interferometry pressure measurement for nuclear applications. These include high temperature bonding between the glass fiber optic and metal housing, identifying diaphragm materials & geometry, and minimizing cross sensitivity to temperature or implementing compensation techniques found in literature. Overcoming these challenges will develop a pathway for a fiber optic based pressure sensor for nuclear applications, and additionally can be leveraged for other sensing application based on Fabry-Perot interferometers, such as temperature, strain (creep & deformation), vibration, and index of refraction.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Preparation of Mesophase Pitch Feedstock for Carbon Fiber

A filtration process of the low cost mesophase pitch developed by Advanced Carbon Products, LLC (ACP) was developed. The mesophase pitch was melt spun into fiber at the University of Kentucky Center for Applied Energy Research (UKY), and converted to carbon fiber. The melt spinning process was moderately stable, but resulted in some void structure in the green fibers. The tensile properties of the resulting carbon fibers, after graphitization heat treatment, were tested yielding a modulus value of approximately 560 GPa or 81 MSI. This demonstrated that a high modulus graphitic carbon fiber is certainly possible from the ACP 20 mesophase pitch. For future work, a better balance between the softening point temperature, the spinning temperature, and filtering must be met to reduce the volatiles generated in the pitch during spinning. This would reduce voids in the fiber, facilitate spinning, and generate finer, higher performance graphitic fiber.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Direct dual layer spinning of aminosilica/ T orlon ® hollow fiber sorbents with a lumen layer for CO 2 separation by rapid temperature swing adsorption

ABSTRACT The direct dual layer spinning of Torlon ® /silica hollow fibers with a neat Torlon ® lumen layer is reported here for the first time. The dual layer fibers containing a porous Torlon ® /silica main structure and a dense, pure Torlon ® polymer bore‐side coating provide a simplified, scalable platform from which to construct hollow fiber amine sorbents for postcombustion CO 2 capture. After fiber spinning, an amine infusion process is applied to incorporate PEI into the silica pores. After combining dilute Neoprene treatment followed by poly(aramid)/PDMS treatment, a helium permeance of the fiber sorbents of 2 GPU with a He/N 2 selectivity of 7.4 is achieved. Ten of the optimized amine‐containing hollow fibers are incorporated into a 22‐inch long, 1/2 inch OD shell‐and‐tube module and the module is then exposed on the shell side to simulated flue gas with an inert tracer (14 mol % CO 2 , 72 mol % N 2 , 14 mol % He [at 100% R.H.]) at 1 atm and 35°C in a RTSA system for preliminary CO 2 sorption experiments. The fibers are found to have a breakthrough and equilibrium CO 2 capacity of 0.8 and 1.2 mmol/g‐ dry fiber sorbent, respectively. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132 , 41845.

Labreche, Ying↗
DOE OSTI2021

Qualitative and quantitative profiles of jejunal oligosaccharides and cecal short–chain fatty acids in broiler chickens receiving different dietary levels of fiber, protein and exogenous enzymes

Dietary supplemental carbohydrases are able to degrade non-starch polysaccharides and generate oligosaccharides in the gastrointestinal tract. This study was conducted to investigate the influence of dietary fiber and protein levels on growth performance, nutrient utilization, digesta oligosaccharides profile and cecal short-chain fatty acid (SCFA) profile in broilers receiving diets supplemented with xylanase or protease individually or in combination. Enzyme supplementation had no effect on growth performance. There was significant (P < 0.05) fiber × protein × xylanase interaction for ileal nitrogen digestibility and significant (P < 0.01) protein × xylanase × protease interaction for nitrogen-corrected apparent metabolizable energy. Birds fed high-fiber diets had higher (P < 0.05) jejunal oligosaccharides and cecal SCFA concentrations. Xylanase and protease combination produced the greatest pentose (Pent) levels in low fiber–adequate protein diets but lowest levels in highfiber–low protein diets. There was significant (P < 0.05) fiber × xylanase × protease interaction explained by the digesta concentrations of (Pent) 3 , (Pent) 4 and (Pent) 5 being greatest (P < 0.5) in protease-only supplemented high-fiber diets but lowest in protease-only supplemented low-fiber diets. Furthermore, these results suggest that, of all the factors investigated, dietary fiber level had the greatest effect on modulating digesta concentration of oligosaccharides and cecal SCFA. Evidence points to the fact that there is considerable capacity for generating pentose oligosaccharides in the digestive tract of broilers receiving diets rich in fibrous feedstuffs, and that this may have a beneficial effect on microbial profile in the digestive tract.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2018

Isolation and characterization of cellulosic fibers from kenaf bast using steam explosion and Fenton oxidation treatment

Degumming is the dominant method to isolate cellulosic fibers in the textile industry. High content of lignin is the principle obstacle in bast-fibers degumming. In this study, in order to remove lignin efficiently, the treatment using steam explosion coupled with Fenton oxidation was conducted on kenaf bast. The influence and mechanism of the combined treatment of steam explosion and Fenton oxidation were studied. Fiber microstructure, composition proportion and distribution, cellulose Segal crystallinity and polymerization as well as residual lignin structure were analyzed. The results showed that the pretreatment of steam explosion could sufficiently extract most of the hemicellulose from kenaf bast. Also, the Fenton oxidation followed by alkaline boiling could effectively remove the lignin from the fiber, especially from the fiber surface. The refined dry fibers produced only remained 8.82% of hemicellulose and 9.36% of lignin. And the whole treatment process didn’t change the cellulose crystalline structure but could gradually degrade hemicellulose, lignin and other amorphous gummy matter as well as disordered areas in cellulose, leading to the increase of fiber Segal crystallinity from 62.02 to 70.12%. Part of cellulose was damaged with the increase of degumming intensity, resulting in the decrease of the polymerization degree of cellulose. Meanwhile, the structure of residual lignin changed during the degumming stages of steam explosion, Fenton oxidation and alkaline boiling. In conclusion, all the results revealed that the treatment of combined steam explosion and Fenton oxidation is significantly effectual for isolating bast-fibers.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Integrating helicoid channels for passive control of fiber alignment in direct-write 3D printing

3D printing of fiber-reinforced composites has been receiving increasing attention as an efficient additive approach enabling lightweight, functional, and high-performance components required for industrial applications. The properties of fiber composites significantly depend on internal microstructures, including fiber orientation, distribution, and degree of alignment. Although multiple strategies have been introduced for controlling the fiber composites microstructures, these strategies are mostly active approaches relying on additional control of mechatronics parts, external forces, or intentionally introduced unstable flows inside narrow nozzles. These methods suffer from higher risk of nozzle clogging and requiring extra parts in 3D printing. Here, we introduce helicoid channels into extrusion system as a passive approach to control the fiber alignment without any additional moving parts in direct-write 3D printing. The helicoid channels automatically guide the composite inks and align fibers before flowing into narrow nozzle space, avoiding clogging and improving printability. The analyses indicate that both helicoid surface to volume ratio and helix angle affect the pre-alignment of fibers, leading to tunable mechanical properties of printed fiber-reinforced composites with increased stiffness and strength up to 77.6% and 47.8%, respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Soluble dietary fiber improves energy homeostasis in obese mice by remodeling the gut microbiota

Intervention with dietary fibers is an important strategy to combat the global epidemic of obesity which is a consequence of energy imbalance. However, a possible role of the gut microbiota in effects of dietary fibers on energy homeostasis remains unclear. Here, we treated a high fat diet-induced obese (DIO) mouse model with soluble dietary fiber. Our results showed that soluble dietary fiber reduced body weight gain and the excessive accumulation of white fat tissue in DIO mice. Notably, soluble dietary fiber increased energy expenditure, but not change energy intake in DIO mice. In accordance, 16S rRNA sequencing revealed that the diversity of the gut microbiota was restored by soluble dietary fiber. Moreover, compared with controls, soluble dietary fiber resulted in a decreased ratio of Firmicutes/Bacteroidetes at the phylum level, and an increased relative abundance of the genera Roseburia at the genus level. Taken together, these findings indicate that soluble dietary fiber improves energy homeostasis and prevents obesity by increasing the diversity of the gut microbiota and the colonization of beneficial bacteria.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2018

The chemorepellent draxin is involved in hippocampal mossy fiber projection

Highlights: • Draxin deficiency led to abnormal projection of hippocampal mossy fibers. • Draxin receptors were expressed on granule cells dissociated from the dentate gyrus. • Draxin inhibited the growth of hippocampal mossy fibers in vitro. Lamina-specific afferent innervation of the mammalian hippocampus is critical for its function. We investigated the relevance of the chemorepellent draxin to the laminar projections of three principal hippocampal afferents: mossy fibers, entorhinal, and associational/commissural fibers. We observed that draxin deficiency led to abnormal projection of mossy fibers but not other afferents. Immunohistochemical analysis indicated that draxin is expressed in the dentate gyrus and cornu ammonis (CA) 3 at postnatal day 0, when dentate granule cells begin to extend mossy fibers towards CA3. Furthermore, a neurite growth assay using dissociated cells of the neonatal dentate gyrus revealed that draxin inhibited the growth of calbindin-D28k-expressing mossy fibers in vitro. Taken together, we conclude that draxin is a key molecule in the regulation of mossy fiber projections.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Recent advancements of plant-based natural fiber–reinforced composites and their applications

Demands for reducing energy consumption and environmental impacts are the major driving factors for the development of natural fiber–reinforced composites (NFRCs) in many sectors. Compared with synthesized fiber, natural fiber provides several advantages in terms of biodegradability, light weight, low price, life-cycle superiority, and satisfactory mechanical properties. However, the inherent features of plant-based natural fibers have presented challenges to the development and application of NFRCs, such as variable fiber quality, limited mechanical properties, water absorption, low thermal stability, incompatibility with hydrophobic matrices, and propensity to agglomeration. Substantial research has recently been conducted to address these challenges for improved performance of NFRCs and their applications. This article reviews the recent advancements of plant-based NFRCs, focusing on strategies and breakthroughs in enhancing the NFRCs’ performance, including fiber modification, fiber hybridization, lignocellulosic fillers incorporation, conventional processing techniques, additive manufacturing (3D printing), and new fiber source exploration. In conclusion, the sustainability of plant-based NFRCs using life-cycle assessment and the burgeoning applications of NFRCs with emphasis on the automotive industry are also discussed.

3D reinforcement↗
DOE OSTI2016

LiCoO 2 -Based Fiber Cathodes for Electrospun Full Cell Li-ion Batteries

Here, particle/polymer electrospinning was used to prepare fiber mat cathodes containing LiCoO 2 nanoparticles, carbon powder, and poly(vinylidene fluoride) for Li-ion batteries. The fibers had a high LiCoO 2 particle content (70 wt%) which allowed for a high gravimetric capacity of 90 mAh g -1 (corresponding to 128 mAh g$-1\atop{LiCoO2}$) at 0.1C (1C = 274 mAh g$-1\atop{LiCoO2}$). Cathode performance was stable in a half cell with 78% capacity retention over 200 cycles at 0.5C. Unlike previous work on electrospun LiCoO 2 nanofibers prepared using sol-gel chemistry and high temperature processing, the particle/polymer fiber mat cathodes reported here were made thick with a high fiber volume fraction for high areal and volumetric capacities at fast charge/discharge rates (e.g., 0.81 mAh cm -2 and 62 mAh cm -3 at 2C) which were much greater than that of a slurry cast cathode of the same composition (0.004 mAh cm -2 and 0.30 mAh cm -3 at 2C). Full cells containing a LiCoO 2 /C/PVDF fiber mat cathode and C/PVDF fiber mat anode were also prepared and characterized. These electrospun batteries exhibited a high energy density of 144 Wh kg -1 at 0.1C and an areal capacity of 1.03 mAh cm -2 at 1C. The excellent performance of the electrospun particle/polymer cathodes and anodes is attributed to electrolyte penetration throughout the 3D fiber electrode mats, a large electrode/electrolyte interfacial area, and short Li + transport pathways between the electrolyte and active material nanoparticles in the radial fiber direction.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2014

Preparation and properties of hexagonal boron nitride fibers used as high temperature membrane filter

Graphical abstract: - Highlights: • h-BN fibers were successfully fabricated using H{sub 3}BO{sub 3} and C{sub 3}H{sub 6}N{sub 6} as raw materials. • The obtained BN fibers were polycrystalline and uniform in morphology. • It exhibited good oxidation resistance and low thermal expansion coefficient. - Abstract: Hexagonal boron nitride fibers were synthesized via polymeric precursor method using boric acid (H{sub 3}BO{sub 3}) and melamine (C{sub 3}H{sub 6}N{sub 6}) as raw materials. The precursor fibers were synthesized by water bath and BN fibers were prepared from the precursor at 1873 K for 3 h in flowing nitrogen atmosphere. The crystalline phase and microstructures of BN fibers were examined by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy and high resolution electron microscopy. The results showed that h-BN fibers with uniform morphology were successfully fabricated. The well-synthesized BN fibers were polycrystalline with 0.4–1.5 μm in diameter and 200–500 μm in length. The as-prepared samples exhibited good oxidation resistance and low thermal expansion coefficient at high temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Distributed optical fiber sensing: Review and perspective

Over the past few decades, optical fibers have been widely deployed to implement various applications in high-speed long-distance telecommunication, optical imaging, ultrafast lasers, and optical sensors. Distributed optical fiber sensors characterized by spatially resolved measurements along a single continuous strand of optical fiber have undergone significant improvements in underlying technologies and application scenarios, representing the highest state of the art in optical sensing. This work is focused on a review of three types of distributed optical fiber sensors which are based on Rayleigh, Brillouin, and Raman scattering, and use various demodulation schemes, including optical time-domain reflectometry, optical frequency-domain reflectometry, and related schemes. Recent developments of various distributed optical fiber sensors to provide simultaneous measurements of multiple parameters are analyzed based on their sensing performance, revealing an inherent trade-off between performance parameters such as sensing range, spatial resolution, and sensing resolution. This review highlights the latest progress in distributed optical fiber sensors with an emphasis on energy applications such as energy infrastructure monitoring, power generation system monitoring, oil and gas pipeline monitoring, and geothermal process monitoring. This review aims to clarify challenges and limitations of distributed optical fiber sensors with the goal of providing a pathway to push the limits in distributed optical fiber sensing for practical applications.

Lu, Ping (ORCID:0000000292010956)↗
DOE OSTI2019

The DESI Fiber View Camera System

The Dark Energy Spectroscopic Instrument (DESI) is a 5000 fiber multi-object spectrometer now being installed at the prime focus of the 4 m Mayall telescope at Kitt Peak. Using DESI to measure ~35 million galaxy redshifts and using the Baryon Acoustic Oscillation (BAO) technique to measure distances, the results will probe the nature of the recently discovered mysterious component of our universe called dark energy. Computer controlled robotic positioners move the 120 μm diameter fibers to positions of galaxies whose location on the sky have been obtained in a previous target selection imaging survey. To achieve good throughput the fibers should be centered on the target position to within 3 μm. The robotic positioners however are only capable of a 50 μm precision on their first move. To achieve the desired precision, the Fiber View Camera (FVC) system has been implemented. The FVC, located near the hole in the primary mirror of the Mayall telescope, has been designed to take an exposure of the focal plane, located at the prime focus some 12 m above the FVC, after the robotic positioners have completed their first move. The FVC is intended to measure the fiber locations with a precision of 3 μm and issue a set of fiber coordinate corrections for the second move correcting the fiber positions by the robotic positioners. Tests show that after two iterations better than 99% of the fibers will be in their intended location to within the desired precision. This paper describes the design of the FVC system, the R&D program preceding the final design, and the tests that have been carried out to demonstrate that the FVC can achieve the required precision.

(cosmology:) dark energy↗
DOE OSTI2021

Femtosecond laser fabrication of nanograting-based distributed fiber sensors for extreme environmental applications

Abstract The femtosecond laser has emerged as a powerful tool for micro- and nanoscale device fabrication. Through nonlinear ionization processes, nanometer-sized material modifications can be inscribed in transparent materials for device fabrication. This paper describes femtosecond precision inscription of nanograting in silica fiber cores to form both distributed and point fiber sensors for sensing applications in extreme environmental conditions. Through the use of scanning electron microscope imaging and laser processing optimization, high-temperature stable, Type II femtosecond laser modifications were continuously inscribed, point by point, with only an insertion loss at 1 dB m −1 or 0.001 dB per point sensor device. High-temperature performance of fiber sensors was tested at 1000 °C, which showed a temperature fluctuation of ±5.5 °C over 5 days. The low laser-induced insertion loss in optical fibers enabled the fabrication of a 1.4 m, radiation-resilient distributed fiber sensor. The in-pile testing of the distributed fiber sensor further showed that fiber sensors can execute stable and distributed temperature measurements in extreme radiation environments. Overall, this paper demonstrates that femtosecond-laser-fabricated fiber sensors are suitable measurement devices for applications in extreme environments.

Wang, Mohan (ORCID:0000000166784993)↗
DOE OSTI2018

High-temperature effects on the light transmission through sapphire optical fiber

Single crystal sapphire optical fiber was tested at high temperatures (1500°C) to determine its suitability for optical instrumentation in high-temperature environments. Broadband light transmission (450-2300 nm) through sapphire fiber was measured as a function of temperature as a test of the fiber's ability to survive and operate in high-temperature environments. Upon heating sapphire fiber to 1400°C, large amounts of light attenuation were measured across the entire range of light wavelengths that were tested. SEM and TEM images of the heated sapphire fiber indicated that a layer had formed at the surface of the fiber, most likely due to a chemical change at high temperatures. The microscopy results suggest that the surface layer may be in the form of aluminum hydroxide. Subsequent tests of sapphire fiber in an inert atmosphere showed minimal light attenuation at high temperatures along with the elimination of any surface layers on the fiber, indicating that the air atmosphere is indeed responsible for the increased attenuation and surface layer formation at high temperatures.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Enhanced piezoresistive sensing of fiber-reinforced composites via embedded nanoparticles

Carbon fiber composites offer outstanding structural performance with high specific strength and are experiencing significant commercial adoption as the fiber price continues to decrease. Composite research efforts now need to focus on creating multifunctional composites, which can offer sensing capabilities in addition to structural attributes. This work focuses on creating multifunctional carbon fiber composites with structural health monitoring capabilities through the integration of piezoresistive nanoparticles on the surface of carbon fiber. Prior research introduced the development of coating silicon carbide nanoparticles on the surface of carbon fiber in a continuous feed-through process to achieve increased SHM sensitivity with enhanced interlaminar strength and tunable mechanical damping properties. One benefit of that coating process is the compatibility with various nanomaterials. This research capitalizes on that benefit by coating different nanoparticles, such as titanium dioxide, on carbon fiber to further enhance the sensing capabilities. A modification to the prior coating process is made in this research to enable significantly higher nanoparticle loading to be achieved. The resulting composites more accurately measure an applied force by responding with a more profound electrical resistance change. This research lays the foundation for efficiently integrating nanoparticles onto fibers leading to homogenously dispersed nanoparticles throughout a fiber reinforced composite for multifunctional performance.

Bowland, Christopher↗
DOE OSTI2021

Passive sensing of a microparticle modified hybrid, fiber-reinforced composite

The widespread commercial adoption of high-performance, fiber-reinforced composites has pushed research interests toward the next generation of composites. These new composites are tasked with integrating additional functionalities into the structures without causing a trade-off in mechanical performance. One such functionality that has received significant interest is sensing. This is especially important for composites using high-performance fibers (e.g., carbon fiber) because their strain-to-failure is relatively low, resulting in brittle fracture. Besides, fiber damage can be hidden within the composite, potentially leading to premature catastrophic failure if not detected. In prior research, we demonstrated continuous feed-through deposition of ceramic nanoparticles on carbon fiber’s surface that simultaneously enhanced both the piezoresistive response and interlaminar shear strength. In this work, a similar continuous feed-through deposition process was used to demonstrate passive sensing and energy harvesting by integrating ferroelectric microparticles on the surface of electrically nonconductive fibers. The sensing and energy harvesting capabilities were characterized by mechanically straining composite beams and measuring the power generated. The improvements in mechanical properties are shown through interlaminar shear strength tests. Therefore, this research aims to demonstrate a high throughput, commercially scalable approach to coat fibers with ferroelectric microparticles that enable passive sensing as well as improved mechanical performance when fabricated into a fiber-reinforced composite.

Bowland, Christopher↗
DOE OSTI2023

Processing Temperature Effect on Failure Behavior of Unidirectional Thermoplastic Polymer-fiber-reinforced Polymers (PFRPs)

This study aimed to examine the influence of processing temperature on the mechanical and morphological characteristics of unidirectional (UD) thermoplastic polymer-fiber-reinforced polymers (PFRPs), utilizing UHMWPE-polymer-fiber-reinforced HDPE composites as an example. To achieve this objective, UD thermoplastic PFRPs were produced through filament winding and hot pressing techniques, employing five distinct processing temperatures within the range spanning from the melting onset temperature of the polymer matrix to the melting peak temperature of the reinforcing polymer fiber. By conducting the uni-axial tensile tests on the UD UHMWPE-polymer-fiber-reinforced HDPE composites fabricated at different processing temperatures, it was shown that the optimal longitudinal tensile properties of the composites, comparable with glass-fiber-reinforced thermoset or thermoplastic polymers (GFRPs or GFRTPs) can be achieved when the processing temperature does not significantly exceeds the melting onset temperature of the reinforcing polymer fiber. However, when the processing temperature exceeds this threshold, the mechanical properties of the composites are significantly reduced, as evidenced by the transition in the failure morphology from the presence of significant splitting cracks to the occurrence of plastic necking due to the complete melting of the reinforcing polymer fibers in a composite. Particularly, the ductile behavior of the optimal thermoplastic PFRPs investigated in this study is superior than that of carbon-fiber-reinforced thermoset or thermoplastic polymers (CFRPs or CFRTPs) and even GFRPs and GFRTPs. This study not only provides valuable insights into the proper fabrication of high-performance thermoplastic PFRPs but also offers useful experimental data that can aid in the validation and development of computational models, particularly those related to processing modeling.

Qiao, Yao↗