Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Enthalpy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Physical aging and solvent effects on the fracture of LaRC-TPI adhesives

When amorphous materials are quenched below their glass transition temperature, excess enthalpy is trapped in the glassy material because the viscosity is too great to allow the material to remain in volumetric equilibrium. Over time, this excess free volume is reduced as the material slowly approaches its equilibrium configuration. This process, known as physical aging, leads to substantial changes in the constitutive behavior of polymers, as has been widely discussed in the literature. Less is known about the effects of this physical aging process on fracture and fatigue properties of aged materials. The original goal of the summer was to investigate the effects of physical aging on the fracture and fatigue behavior of LaRC-TPI, a thermoplastic polyimide developed at NASA-Langley. Preliminary results are reported, although a lack of equipment availability prevented completion of this task. In the process of making specimens, the current LaRC-TPI was observed to be extremely susceptible to environmental stress cracking. A study of the unique failure patterns resulting from this degradation process in bonded joints was conducted and is also reported herein.

Dillard, David A.↗
NASA NTRS1993

A critical analysis of the accuracy of several numerical techniques for combustion kinetic rate equations

A detailed analysis of the accuracy of several techniques recently developed for integrating stiff ordinary differential equations is presented. The techniques include two general-purpose codes EPISODE and LSODE developed for an arbitrary system of ordinary differential equations, and three specialized codes CHEMEQ, CREK1D, and GCKP4 developed specifically to solve chemical kinetic rate equations. The accuracy study is made by application of these codes to two practical combustion kinetics problems. Both problems describe adiabatic, homogeneous, gas-phase chemical reactions at constant pressure, and include all three combustion regimes: induction, heat release, and equilibration. To illustrate the error variation in the different combustion regimes the species are divided into three types (reactants, intermediates, and products), and error versus time plots are presented for each species type and the temperature. These plots show that CHEMEQ is the most accurate code during induction and early heat release. During late heat release and equilibration, however, the other codes are more accurate. A single global quantity, a mean integrated root-mean-square error, that measures the average error incurred in solving the complete problem is used to compare the accuracy of the codes. Among the codes examined, LSODE is the most accurate for solving chemical kinetics problems. It is also the most efficient code, in the sense that it requires the least computational work to attain a specified accuracy level. An important finding is that use of the algebraic enthalpy conservation equation to compute the temperature can be more accurate and efficient than integrating the temperature differential equation.

Radhadrishnan, Krishnan↗
NASA NTRS1992

Issues and approach to develop validated analysis tools for hypersonic flows: One perspective

Critical issues concerning the modeling of low-density hypervelocity flows where thermochemical nonequilibrium effects are pronounced are discussed. Emphasis is on the development of validated analysis tools. A description of the activity in the Ames Research Center's Aerothermodynamics Branch is also given. Inherent in the process is a strong synergism between ground test and real-gas computational fluid dynamics (CFD). Approaches to develop and/or enhance phenomenological models and incorporate them into computational flow-field simulation codes are discussed. These models have been partially validated with experimental data for flows where the gas temperature is raised (compressive flows). Expanding flows, where temperatures drop, however, exhibit somewhat different behavior. Experimental data for these expanding flow conditions are sparse; reliance must be made on intuition and guidance from computational chemistry to model transport processes under these conditions. Ground-based experimental studies used to provide necessary data for model development and validation are described. Included are the performance characteristics of high-enthalpy flow facilities, such as shock tubes and ballistic ranges.

Deiwert, George S.↗
NASA NTRS1993

Thermodynamic data for fifty reference elements

This report is a compilation of thermodynamic functions of 50 elements in their standard reference state. The functions are C(sub p)(sup 0), (H(sup 0)(T) - H(sup 0)(0)), S(sup 0)(T), and -(G(sup 0)(T) - H(sup 0)(O)) for the elements Ag, Al, Ar, B, Ba, Be, Br2, C, Ca, Cd, Cl2, Co, Cr, Cs, Cu, F2, Fe, Ge, H2, He, Hg, I2, K, Kr, Li, Mg, Mn, Mo, N2, Na, Nb, Ne, Ni, O2, P, Pb, Rb, S, Si, Sn, Sr, Ta, Th, Ti, U, V, W, Xe, Zn, and Zr. Deuterium D2 and electron gas e(sup -) are also included. The data are tabulated as functions of temperature as well as given in the form of least-squares coefficients for two functional forms for C(sub p)(sup 0) with integration constants for enthalpy and entropy. One functional form for C(sub p)(sup 0) is a fourth-order polynomial and the other has two additional terms, one with T(exp -1) and the other with T(exp -2). The gases Ar, D2, e(sup -), H2, He, Kr, N2, Ne, O2, and Xe are tabulated for temperatures from 100 to 20,000 K. The remaining gases Cl2 and F2 are tabulated from 100 to 6000 K and 1000 to 6000 K. The second functional form for C(sub p)(sup 0) has an additional interval from 6000 to 20,000 K for the gases tabulated to 20,000 K. The fits are constrained so that the match at the common temperature endpoints. The temperature ranges for the condensed species vary with range of the data, phase changes, and shapes of the C(sub p)(sup 0) curves.

Mcbride, Bonnie J.↗
NASA NTRS1992

A k-omega-multivariate beta PDF for supersonic combustion

In an attempt to study the interaction between combustion and turbulence in supersonic flows, an assumed PDF has been employed. This makes it possible to calculate the time average of the chemical source terms that appear in the species conservation equations. In order to determine the averages indicated in an equation, two transport equations, one for the temperature (enthalpy) variance and one for Q, are required. Model equations are formulated for such quantities. The turbulent time scale controls the evolution. An algebraic model similar to that used by Eklund et al was used in an attempt to predict the recent measurements of Cheng et al. Predictions were satisfactory before ignition but were less satisfactory after ignition. One of the reasons for this behavior is the inadequacy of the algebraic turbulence model employed. Because of this, the objective of this work is to develop a k-omega model to remedy the situation.

Alexopoulos, G. A.↗
NASA NTRS1993

Computational fluid dynamics for nuclear thermal propulsion

Viewgraphs on computational fluid dynamics (CFD) for nuclear thermal propulsion are presented. Topics covered include: hydrogen mass fraction as a function of chamber temperature; specific enthalpy of hydrogen and mole fraction of hydrogen as a function of chamber pressure; and specific impulse as a function of chamber pressure. Wall configurations of several nozzles are shown.

Stubbs, Robert M.↗
NASA NTRS1992

Taking the measure of aerodynamic testing

A review is presented of the major challenges for aerodynamic measurement created by advanced aircraft systems that range from turbulence modeling to scramjet engines. Three diverse examples typically challenge current capabilities: modeling of compressible turbulence, validation of complex 3D flow predictions, and thermochemical characterization of chemically active high-enthalpy flows. Various techniques being explored and under development to realize the aerodynamic measurements required are discussed.

Erbland, Peter J.↗
NASA NTRS1992

The effect of entrance radius and film injection on wall heating in scramjet nozzles

An experimental study has been performed with a scramjet combustor and nozzle model to determine the effect of nozzle radii on relaminarization, and the effectiveness of film injection in reducing wall heat flux. The nozzle model was installed downstream of a swept-ramp scramjet combustor model, operated at Mach 2.7 with vitiated air, simulating Mach 6-7 flight enthalpies. Results from tests conducted with three nozzle radii, varying in curvature from a sharp Prandtl-Meyer expansion to a radius of two scramjet combustor exit heights, showed little or no effect on the downstream wall heat flux, which is not in agreement with both subsonic and supersonic relaminarization correlations in the available literature. In contrast, film injection upstream of all three radii produced reductions of 70 percent in the entire nozzle model heating rate, for the nominal film-to-free stream pressure matched condition. Results from film injection, with and without pressure gradient, but without wall curvature, show that the gradients appear to stabilize the film, with the resulting reductions in wall heat transfer rates apparent far downstream of the point of injection.

Baker, N. R.↗
NASA NTRS1993

PDF approach for compressible turbulent reacting flows

The objective of the present work is to develop a probability density function (pdf) turbulence model for compressible reacting flows for use with a CFD flow solver. The probability density function of the species mass fraction and enthalpy are obtained by solving a pdf evolution equation using a Monte Carlo scheme. The pdf solution procedure is coupled with a compressible CFD flow solver which provides the velocity and pressure fields. A modeled pdf equation for compressible flows, capable of capturing shock waves and suitable to the present coupling scheme, is proposed and tested. Convergence of the combined finite-volume Monte Carlo solution procedure is discussed, and an averaging procedure is developed to provide smooth Monte-Carlo solutions to ensure convergence. Two supersonic diffusion flames are studied using the proposed pdf model and the results are compared with experimental data; marked improvements over CFD solutions without pdf are observed. Preliminary applications of pdf to 3D flows are also reported.

Hsu, A. T.↗
NASA NTRS1993

Comparison of Numerical Model Results with Diffusion Flames in Microgravity

The effects of gravity on methane diffusion flames were studied using a finite difference numerical model. Variables under consideration included velocity, pressure, temperature, enthalpy, reactive species, and inert carrier gas. Results obtained showed that flames in zero gravity were wider and taller than those in normal gravity. The use of a six reaction scheme produced similar predictions of flame width and height compared to those of the single reaction case. The numerical models predicted a considerable difference in the flame base region between normal gravity and low gravity. This region is considered to be beyond the boundaries of current analytical models.

Hyer, Paul V.↗
NASA NTRS1993

An experimental parametric study of geometric, Reynolds number, and ratio of specific heats effects in three-dimensional sidewall compression scramjet inlets at Mach 6

The effects of the decrease in the ratio of specific heats have been investigated in generic 3D sidewall compression scramjet inlets with leading-edge sweep angles of 30 and 70 degrees. The effects of a decrease in ratio of specific heats were seen by comparing data from two facilities in two test gases: in the Langley Mach 6 CF4 Tunnel in tetrafluoromethane and in the Langley 15-Inch Mach 6 Air Tunnel in perfect gas air. In addition to the simulated real gas effects, the parametric effects of cowl position, contraction ratio, leading-edge sweep, and Reynolds number were investigated in the 15-Inch Mach 6 Air Tunnel. The models were instrumented with a total of 45 static pressure orifices distributed on the sidewalls and baseplate. Surface streamline patterns were examined via oil flow, and schlieren videos were made of the external flow field. The results of these tests have significant implications to ground based testing of inlets in facilities which do not operate at flight enthalpies.

Holland, Scott D.↗
NASA NTRS1993

Evidence for ion jets in the high-speed solar wind

Results of an investigation of shapes of proton and alpha particle velocity distribution functions in the high-speed solar wind for the time period from 1973 to 1987 are presented. It is suggested that a modest amount of heating results from the damping of waves, whereas additional heating and the bulk of the acceleration is associated with the direct conversion of magnetic energy flux to plasma convection and enthalpy flux through the process of magnetic reconnection. The present two-component model of heating and acceleration predicts that the ambient flow of plasma from coronal holes is characterized by a low-speed and a low-mass flux. The proton flux is insufficient to drag alpha particles out of the solar gravitational potential well.

Feldman, W. C.↗
NASA NTRS1993

Ionization effects in three-dimensional solar granulation simulations

These numerical studies show that ionization influences both the transport and dynamical properties of compressible convection near the surface of the Sun. About two-thirds of the enthalpy transported by convective motions in the region of partial hydrogen ionization is carried as latent heat. The role of fast downflow plumes in total convective transport is substantially elevated by this contribution. Instability of the thermal boundary layer is strongly enhanced by temperature sensitive variations in the radiative properties of the fluid, and this provides a mechanism for plume initiation and cell fragmentation in the surface layers. As the plumes descend, temperature fluctuations and associated buoyancy forces are maintained because of the increased specific heat of the partially ionized material. This can result is supersonic vertical flows. At greater depths, ionization effects diminish, and the plumes are decelerated by significant entrainment of surrounding fluid.

Rast, Mark P.↗
NASA NTRS1993

Hypersonic propulsion - Breaking the thermal barrier

The challenges of hypersonic propulsion impose unique features on the hypersonic vehicle - from large volume requirements to contain cryogenic fuel to airframe-integrated propulsion required to process sufficient quantities of air. Additional challenges exist in the design of the propulsion module that must be capable of efficiently processing air at very high enthalpies, adding and mixing fuel at supersonic speeds and expanding the exhaust products to generate thrust greater than drag. The paper explores the unique challenges of the integrated hypersonic propulsion system, addresses propulsion cycle selection to cope with the severe thermal environment and reviews the direction of propulsion research at hypervelocity speeds.

Weidner, J. P.↗
NASA NTRS1992

Fusible heat sink materials - Evaluation of alternate candidates

Fusible heat sinks are a possible source for thermal regulation of space suited astronauts. Materials with greater thermal storage capability than water could enable both an extension of time between recharging and/or a reduction in size and/or mass. An extensive literature search identified 1,215 candidates with a solid-liquid transformation within the temperature range of -13 C to 5 C. Based on data available in the literature, several candidates with a cooling capacity significantly greater than water were identified. Measurements of the transformation temperature and enthalpy of transformation were then undertaken with a differential scanning calorimeter in order to confirm the accuracy of the literature. Laboratory measurements have thus far not been able to corroborate the extremely high values found from the literature. This paper presents the approach for materials selection utilized in this study, the experimental procedure, and the results of the measurements thus far undertaken.

Selvaduray, Guna S.↗
NASA NTRS1991

Intrusive and nonintrusive measurements of flow properties in arc jets

While numerous diagnostic techniques are available for determining the flow properties of arc jets, these have to be used complementarily in order to cover all the requisite information. Although intrusive techniques disturb the flow, they yield much information. The determination of total enthalpy remains a major challenge, and accurate heat-flux measurements entail knowledge of atom recombination and chemical energy recombination coefficients. Such state-specific methods as the spectroscopic and laser techniques are useful in understanding the chemistry and nonequilibrium reaction and excitation rates of the flow.

Scott, Carl D.↗
NASA NTRS1993

Development and operation of new arc heater technology for a large-scale scramjet propulsion test facility

An arc-heater technology development effort conducted at NASA-Ames has led to the creation of a 100 MW Huels arc heater which has been integrated into the hydrogen-fueled Direct Connect Arcjet Facility for long-duration, high Mach-number scramjet performance evaluation. This development effort has significantly advanced the design of vortex-stabilized arc heaters; air enthalpy levels of 2.8-7.5 MJ/kg, at stagnation pressures of up to 45 atm, are produced. The facility furnishes technology-development support that is critical to the definition of NASP-related propulsion systems.

Balboni, John↗
NASA NTRS1993

Thermal response and ablation characteristics of light weight ceramic ablators

An account is given of the thermal performance and ablation characteristics of the NASA-Ames Lightweight Ceramic Ablators (LCAs) in supersonic, high-enthalpy convective environments, which use low density ceramic or carbon fiber matrices as substrates for main structural support, with organic resin fillers. LCA densities are in the 0.224-1.282 g/cu cm range. In-depth temperature data have been obtained to determine thermal penetration depths and conductivity. The addition of SiC and PPMA is noted to significantly improve the ablation performance of LCAs with silica substrates. Carbon-based LCAs are the most mass-efficient at high flux levels.

Tran, Huy K.↗