Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Energy levels”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Excitation-Dependent Recombination and Diffusion Near an Isolated Dislocation in GaAs

In low-magnification, plan-view photoluminescence images of a nominally lattice-matched, undoped GaAs/GaInP heterostructure, we observe a random distribution of isolated dark spots. We attribute the dark spots to crystal dislocations, where nonradiative recombination is augmented by transitions utilizing defect-related energy levels between the conduction and valence bands. We note that, when the laser excitation intensity is reduced, the darkened regions expand. At lower excitation, the density of photogenerated electrons and holes is reduced, and they are more likely to reach the defective region before encountering a partner for radiative recombination. When we model the behavior with a simulation that allows for Laplacian diffusion and defect-related recombination only through mid-bandgap energy levels, we do not obtain good agreement between experimental and simulated images. But if we allow for an arbitrary distribution of defect levels, such that the occupation of the levels and bands can change independently, we have more flexibility for fitting the density-dependent recombination rates. The more sophisticated model produces results that are more consistent with experimental images.

14 SOLAR ENERGY↗

Ultrafast carriers dynamics in filled-skutterudites

Carrier dynamics of filled-skutterudites, an important class of thermoelectric materials, is investigated using ultrafast optical spectroscopy. By tuning the wavelength of the probe laser, charge transfers at different electronic energy levels are interrogated. Analysis based on the Kramers-Kronig relation explains the complex spectroscopy data, which is mainly due to band filling caused by photo-excited carriers and free carrier absorption. The relaxation time of hot carriers is found to be about 0.4–0.6 ps, depending on the electronic energy level, and the characteristic time for carrier-phonon equilibrium is about 0.95 ps. These studies of carrier dynamics, which fundamentally determines the transport properties of thermoelectric material, can provide guidance for the design of materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Elementary framework for cold field emission from quantum-confined, non-planar emitters

For suitably small field emitters, the effects of quantum confinement at the emitter tip may have a significant impact on the emitter performance and total emitted current density (ECD). Since the geometry of a quantum system uniquely determines the magnitude and distribution of its energy levels, a framework for deriving ECD equations from cold field electron emitters of arbitrary geometry and dimensionality is developed. In the interest of obtaining semi-analytical ECD equations, the framework is recast in terms of plane wave solutions to the Schrödinger equation via the use of the Jeffreys-Wentzel-Kramers-Brillouin approximation. To demonstrate the framework's consistency with our previous work and its capabilities in treating emitters with non-planar geometries, ECD equations were derived for the normally unconfined cylindrical nanowire (CNW) and normally confined (NC) CNW emitter geometries. As a function of the emitter radius, the NC CNW emitter ECD profile displayed a strong dependence on the Fermi energy and had an average ECD that exceeded the Fowler-Nordheim equation for typical values of the Fermi energy due to closely spaced, singly degenerate energy levels (excluding electron spin), comparatively large electron supply values, and the lack of a transverse, zero-point energy. Such characteristics suggest that emitters with non-planar geometries may be ideal for emission from both an electron supply and electrostatics perspective.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Improving ChemCam LIBS long-distance elemental compositions using empirical abundance trends

The ChemCam instrument on the Curiosity rover provides chemical compositions of Martian rocks and soils using remote laser-induced breakdown spectroscopy (LIBS). The elemental calibration is stable as a function of distance for Ti, Fe, Mg, and Ca. The calibration shows small, systematically increasing abundance trends as a function of distance for Al, Na, K, and to some extent, Si. The distance effect is known to be due to a dependence with distance on the relative strengths of atomic transition lines. Emission lines representing transitions from relatively low energy levels remain intense at longer distances while emission lines representing transitions from higher energy levels decrease in intensity more rapidly as a function of distance. The multivariate algorithms used to determine elemental compositions rely on a large number of emission lines in many cases, so rather than trying to correct all emission lines, a study was made of the predicted compositions as a function of distance, in order to determine an empirical correction. Abundance trends can be well approximated by a linear trend with distance within the ranges of abundances and distances observed up to ~6 m. Data from 11 distinct geological members and data groups of the Murray formation in Gale crater, Mars, were used to form the model, selecting the members and data groups yielding the best statistics. The model was tested using data from several targets observed from two different distances, and using data from the Kimberley formation, the composition of which is significantly different from the Murray formation, showing that the model works on other compositions beyond those used to build the model. For long-distance observations up to ~6 m, corrections can be made back to an equivalent composition at the median distance of ChemCam observations (2.6 m). Finally, the model has been validated up to 6.2 m, although ChemCam is able to observe bedrock targets to >7 m, and iron meteorites to distances of >9 m.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Length-scale dependent mechanical properties of Al-Cu eutectic alloy: Molecular dynamics based model and its experimental verification

This paper attempts to gain an understanding of the effect of lamellar length scale on the mechanical properties of two-phase metal-intermetallic eutectic structure. We first develop a molecular dynamics model for the in-situ grown eutectic interface followed by a model of deformation of Al-Al{sub 2}Cu lamellar eutectic. Leveraging the insights obtained from the simulation on the behaviour of dislocations at different length scales of the eutectic, we present and explain the experimental results on Al-Al{sub 2}Cu eutectic with various different lamellar spacing. The physics behind the mechanism is further quantified with help of atomic level energy model for different length scale as well as different strain. An atomic level energy partitioning of the lamellae and the interface regions reveals that the energy of the lamellae core are accumulated more due to dislocations irrespective of the length-scale. Whereas the energy of the interface is accumulated more due to dislocations when the length-scale is smaller, but the trend is reversed when the length-scale is large beyond a critical size of about 80 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determination of the mass spectrum of the bound state in the framework of the relativistic hamiltonian approach

We propose one a variant of calculation of the energy spectrum of bound state systems with relativistic corrections. In the framework of quantum field theory, an expression that takes into account relativistic corrections to the mass of the bound state with a known nonrelativistic pair interaction potential is proposed on the basis of calculating the asymptotic behavior of correlation functions of the corresponding field currents with the necessary quantum numbers. Excluding the time variables allows one to determine nonperturbative corrections to the interaction potential. The following results have been obtained in the framework of this approach. The nonperturbative corrections arising due to the relativistic nature of a system to the interaction Hamiltonian are determined. The dependence of the constituent mass of bound-state forming particles on the free state mass and on the orbital and radial quantum numbers is analytically derived. The energy level shift of muonic hydrogen taking into account relativistic corrections is calculated. The energy spectrum of a wide class of potentials that describe the Coulomb bound state is analytically derived with relativistic corrections. The mass spectrum of the glueballs and the constituent masses of the gluons are analytically calculated taking into account spin-orbit, spin—spin, and tensor interactions. Our numerical results have shown very good agreement with the lattice data. Taking into account nonperturbative and nonlocality characters of interactions, the mass spectrum of the mesons consisting of light-light and light-heavy quarks with orbital and radial excitations is determined. Our results show that good agreement with the experimental data for the slope and the intercept of the Regge trajectory can be obtained only taking into account the nonperturbative and the nonlocal characters of interactions. The dependences of the constituent masses of constituent particles on the masses of a free state are certain. When quarks are light, then the difference between current and valent masses of quarks is greater than valent masses of quarks, and when quarks are heavy, then the difference between these masses is insignificant. One of the alternative variants of taking nonlocality into account has been suggested for the definition of properties of hadrons at large distances. The dependence of the constituent masses of constituent particles on the radius of confinement is determined.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The effect of Low Earth Orbit space environment on polymeric spacecraft materials

The Advanced Composite Materials Exposure to Space Experiment flown on shuttle mission STS-41G was designed to investigate the effect of low Earth orbit space environment on polymeric spacecraft materials. The effect of the phenomenon attributed to atomic oxygen on Kapton and advanced composite materials of carbon-epoxy and kevlar epoxy is described. The results of true space exposure are compared to duplicate specimens subjected to a simulated environment in an Earth-based nozzle beam test facility utilizing microwave discharge to form atomic oxygen. Although the energy level for atomic oxygen in the beam facility did not achieve the orbital energy level of 5 eV, similar effects of surface erosion and degradation are observed after equivalent exposure times.

Zimcik, D. G.↗

Electron tunneling spectroscopy study of electrically active traps in AlGaN/GaN high electron mobility transistors

We investigate the energy levels of electron traps in AlGaN/GaN high electron mobility transistors by the use of electron tunneling spectroscopy. Detailed analysis of a typical spectrum, obtained in a wide gate bias range and with both bias polarities, suggests the existence of electron traps both in the bulk of AlGaN and at the AlGaN/GaN interface. The energy levels of the electron traps have been determined to lie within a 0.5 eV band below the conduction band minimum of AlGaN, and there is strong evidence suggesting that these traps contribute to Frenkel-Poole conduction through the AlGaN barrier.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Line Identification of Atomic and Ionic Spectra of Holmium in the Near-UV. II. Spectra of Ho ii and Ho iii

Fourier Transform spectra of holmium (Ho) in the UV spectral range from 31,530 to 25,000 cm{sup −1} (317 to 400 nm) have been investigated, particularly focusing on the ionic lines. The distinction between the different degrees of ionization (I, II, and III) is based on differences in signal-to-noise ratios from two Ho spectra, which have been measured with different buffer gases, i.e., neon and argon. Based on 106 known Ho ii and 126 known Ho iii energy levels, 97 lines could be classified as transitions of singly ionized Ho and 9 lines could be classified as transitions of doubly ionized Ho. Of the 97 Ho ii lines, 6 have not been listed in the extant literature. Another 215 lines have been assigned to Ho ii, though they could not be classified on the basis of the known energy levels.

74 ATOMIC AND MOLECULAR PHYSICS↗

High-precision (p,t) reaction to determine {sup 25}Al(p,{gamma}){sup 26}Si reaction rates

Since the identification of ongoing {sup 26}Al production in the universe, the reaction sequence {sup 24}Mg(p,{gamma}){sup 25}Al({beta}{sup +{nu}}){sup 25}Mg(p,{gamma}){sup 26}Al has been studied intensively. At temperatures where the radiative capture on {sup 25}Al (t{sub 1/2}=7.2 s) becomes faster than the {beta}{sup +} decay, the production of {sup 26}Al can be reduced due to the depletion of {sup 25}Al. To determine the resonances relevant for the {sup 25}Al(p,{gamma}){sup 26}Si bypass reaction, we measured the {sup 28}Si(p,t){sup 26}Si reaction with high-energy precision using the Grand Raiden spectrometer at the Research Center for Nuclear Physics, Osaka. Several new energy levels were found above the p threshold and for known states excitation energies were determined with smaller uncertainties. The calculated stellar rates of the bypass reaction agree well with previous results, suggesting that these rates are well established.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The down-conversion and up-conversion photoluminescence properties of Na{sub 0.5}Bi{sub 0.5}TiO{sub 3}:Yb{sup 3+}/Pr{sup 3+} ceramics

Na{sub 0.5}Bi{sub 0.5−x−y}Yb{sub x}Pr{sub y}TiO{sub 3} (NBT:xYb/yPr) ceramics with different Yb and Pr contents are prepared. Both the down-conversion (DC) and up-conversion (UC) photoluminescence (PL) of the ceramics via 453 and 980 nm excitation, respectively, are investigated. The effect of Yb{sup 3+} and Pr{sup 3+} doping contents on the DC and UC PL is significantly different from each other. Furthermore, the UC PL of the ceramics as a function of temperatures is measured to investigate the UC process in detail. Based on energy level diagram of Pr{sup 3+} and Yb{sup 3+} ions and the DC and UC PL spectra, the DC and UC PL mechanisms of Pr{sup 3+} and Yb{sup 3+} ions are discussed. Especially, the UC PL mechanism is clarified, which is different from the previously reported literature. Also, the temperature sensing properties of the ceramics are studied based on the photoluminescence ratio technique, using the thermal coupling energy levels of Pr{sup 3+}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The problem of the structure (state of helium) in small He{sub N}-CO clusters

A second-order perturbation theory, developed for calculating the energy levels of the He-CO binary complex, is applied to small He{sub N}-CO clusters with N = 2-4, the helium atoms being considered as a single bound object. The interaction potential between the CO molecule and HeN is represented as a linear expansion in Legendre polynomials, in which the free rotation limit is chosen as the zero approximation and the angular dependence of the interaction is considered as a small perturbation. By fitting calculated rotational transitions to experimental values it was possible to determine the optimal parameters of the potential and to achieve good agreement (to within less than 1%) between calculated and experimental energy levels. As a result, the shape of the angular anisotropy of the interaction potential is obtained for various clusters. It turns out that the minimum of the potential energy is smoothly shifted from an angle between the axes of the CO molecule and the cluster of {theta} = 100{sup o} in He-CO to {theta} = 180{sup o} (the oxygen end) in He{sub 3}-CO and He{sub 4}-CO clusters. Under the assumption that the distribution of helium atoms with respect to the cluster axis is cylindrically symmetric, the structure of the cluster can be represented as a pyramid with the CO molecule at the vertex.

74 ATOMIC AND MOLECULAR PHYSICS↗

Orange Fluorescent Ru(III) Complexes Based on 4′-Aryl Substituted 2,2′:6′,2″-Terpyridine for OLEDs Application

A series of ruthenium (III) complexes of the formulae [Ru(4-Mephtpy){sub 2}]Cl{sub 3}(1) [Ru(L{sub 1})], [Ru(3,4,5-tmphtpy){sub 2}]Cl{sub 3}(2) [Ru(L{sub 2})], and [Ru(4-thptpy){sub 2}]Cl{sub 3}(3) [Ru(L{sub 3})], (where L = terpy = 2.2′:6′2″ terpyridine ligands) are synthesized. The complexes were characterized by elemental analyses, spectroscopic and electrochemical data. The density functional theory (DFT) outlines the geometric optimisation and electronic charge transition of these complexes. Photophysical studies describe that the luminescence of Ru(III) complexes is due to electronic transition between the energy levels of singly unoccupied molecular orbitals (SUMO) and singly occupied molecular orbitals (SOMO). It also exhibits the potential charge transfer to π–π* and n–π* states due to MLCT and ILCT processes of the complexes. The observed bands centered at 591 and 620 nm demonstrate that these emissions originated from the transition of SUMO to SOMO energy levels, that is, from the radiative decay from the doublet exciton. Due to the heavy metal effect of Ru(III) ions the photophysical behaviour depends on the MLCT process. In conclusion, that the all three Ru(L{sub 1}-L{sub 3}) complexes are fallen orange emission.

74 ATOMIC AND MOLECULAR PHYSICS↗

Understanding the conductance switching of permethyloligosilanes: A theoretical approach

On the basis of ab initio density functional theory coupled with non-equilibrium Green’s function technique, we have presented a molecular level understanding on the stereoelectronic switching of conducting properties of oligosilane molecules. Su et al. [Nat. Chem. 7, 215–220 (2015)] demonstrated that these types of oligosilane molecules exhibit three stereoconformers which show two distinct conducting profiles. On the basis of break-junction technique, the authors show that manipulating a specific dihedral angle and thereby controlling the length of the molecular contact, it is possible to switch the conducting states minutely. However, their discussions scarce the proper energy level alignment upon which the molecule-lead tunneling amplitude depends. On the basis of electronic structure and non-equilibrium electron transport calculations, we interpret such switching behavior and thus quantify the switching parameter demonstrating how the metal-molecule contact geometry along with the electronic energy level alignment is responsible for such kind of junction process. We also provide the variation of switching parameter and the type of majority carrier with the conjugation length of the oligosilanes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Localization or tunneling in asymmetric double-well potentials

An asymmetric double-well potential is considered, assuming that the wells are parabolic around the minima. The WKB wave function of a given energy is constructed inside the barrier between the wells. By matching the WKB function to the exact wave functions of the parabolic wells on both sides of the barrier, for two almost degenerate states, we find a quantization condition for the energy levels which reproduces the known energy splitting formula between the two states. For the other low-lying non-degenerate states, we show that the eigenfunction should be primarily localized in one of the wells with negligible magnitude in the other. Using Dekker’s method (Dekker, 1987), the present analysis generalizes earlier results for weakly biased double-well potentials to systems with arbitrary asymmetry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Adsorption geometry, molecular interaction, and charge transfer of triphenylamine-based dye on rutile TiO{sub 2}(110)

The fast development of new organic sensitizers leads to the need for a better understanding of the complexity and significance of their adsorption processes on TiO{sub 2} surfaces. We have investigated a prototype of the triphenylamine-cyanoacrylic acid (donor-acceptor) on rutile TiO{sub 2} (110) surface with special attention on the monolayer region. This molecule belongs to the type of dye, some of which so far has delivered the record efficiency of 10%-10.3% for pure organic sensitizers [W. Zeng, Y. Cao, Y. Bai, Y. Wang, Y. Shi, M. Zhang, F. Wang, C. Pan, and P. Wang, Chem. Mater. 22, 1915 (2010)]. The molecular configuration of this dye on the TiO{sub 2} surface was found to vary with coverage and adopt gradually an upright geometry, as determined from near edge x-ray absorption fine structure spectroscopy. Due to the molecular interaction within the increasingly dense packed layer, the molecular electronic structure changes systematically: all energy levels shift to higher binding energies, as shown by photoelectron spectroscopy. Furthermore, the investigation of charge delocalization within the molecule was carried out by means of resonant photoelectron spectroscopy. A fast delocalization ({approx}1.8 fs) occurs at the donor part while a competing process between delocalization and localization takes place at the acceptor part. This depicts the ''push-pull'' concept in donor-acceptor molecular system in time scale.

36 MATERIALS SCIENCE↗

Electrical and photovoltaic characteristics of MoS{sub 2}/Si p-n junctions

Bulk-like molybdenum disulfide (MoS{sub 2}) thin films were deposited on the surface of p-type Si substrates using dc magnetron sputtering technique and MoS{sub 2}/Si p-n junctions were formed. The vibrating modes of E{sup 1}{sub 2g} and A{sub 1g} were observed from the Raman spectrum of the MoS{sub 2} films. The current density versus voltage (J-V) characteristics of the junction were investigated. A typical J-V rectifying effect with a turn-on voltage of 0.2 V was shown. In different voltage range, the electrical transporting of the junction was dominated by diffusion current and recombination current, respectively. Under the light illumination of 15 mW cm{sup −2}, the p-n junction exhibited obvious photovoltaic characteristics with a short-circuit current density of 3.2 mA cm{sup −2} and open-circuit voltage of 0.14 V. The fill factor and energy conversion efficiency were 42.4% and 1.3%, respectively. According to the determination of the Fermi-energy level (∼4.65 eV) and energy-band gap (∼1.45 eV) of the MoS{sub 2} films by capacitance-voltage curve and ultraviolet-visible transmission spectra, the mechanisms of the electrical and photovoltaic characteristics were discussed in terms of the energy-band structure of the MoS{sub 2}/Si p-n junctions. The results hold the promise for the integration of MoS{sub 2} thin films with commercially available Si-based electronics in high-efficient photovoltaic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

16.52% Efficiency All-Polymer Solar Cells with High Tolerance of the Photoactive Layer Thickness

All-polymer solar cells (all-PSCs) have drawn growing attention and achieved tremendous progress recently, but their power conversion efficiency (PCE) still lags behind small-molecule-acceptor (SMA)-based PSCs due to the relative difficulty on morphology control of polymer photoactive blends. Here, in this work, low-cost PTQ10 is introduced as a second polymer donor (a third component) into the PM6:PY-IT blend to finely tune the energy-level matching and microscopic morphology of the polymer blend photoactive layer. The addition of PTQ10 decreases the π–π stacking distance, and increases the π–π stacking coherence length and the ordered face-on molecular packing orientation, which improves the charge separation and transport in the photoactive layer. Moreover, the deeper highest occupied molecular orbital energy level of the PTQ10 polymer donor than PM6 leads to higher open-circuit voltage of the ternary all-PSCs. As a result, a PCE of 16.52% is achieved for ternary all-PSCs, which is one of the highest PCEs for all-PSCs. In addition, the ternary devices exhibit a high tolerance of the photoactive layer thickness with high PCEs of 15.27% and 13.91% at photoactive layer thickness of ≈205 and ≈306 nm, respectively, which are the highest PCEs so far for all-PSCs with a thick photoactive layer.

14 SOLAR ENERGY↗