Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Embedded computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

High-Energy X-ray Tomographic Analysis of Precursor Metal Powders (Ti-6Al-4V) Used for Additive Manufacturing

We utilized high-energy x-ray tomography to characterize Ti-6Al-4V metal powders (both as-received and recycled) used in powder-bed additive manufacturing process. The image processing workflow was developed to process and analyze large amount of data objectively by computer program. The distribution of size and shape of the metal particles as well as defect (mainly porosity) inside the particles was analyzed with the statistical representation and resolution in micrometer. The result revealed that circular-shaped porosity with various sizes could be embedded in the powder particles. These porosities could potentially be transferred to the 3D printed part and critically affect the mechanical performance of the component. The present study shows the effectiveness of characterizing metal powders using x-ray imaging techniques where sufficient number of particles can be sampled within tens of minutes with a minimum sample preparation and high accuracy. Clear structural differences in the as-received and recycled powders were delineated that helps in determining the feasibility of using the recycled powders.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Direct numerical simulations of turbulent reacting flows with shock waves and stiff chemistry using many-core/GPU acceleration

Compressible reacting flows may display sharp spatial variation related to shocks, contact discontinuities or reactive zones embedded within relatively smooth regions. The presence of such phenomena emphasizes the relevance of shock-capturing schemes such as the weighted essentially non-oscillatory (WENO) scheme as an essential ingredient of the numerical solver. However, these schemes are complex and have more computational cost than the simple high-order compact or non-compact schemes. In this paper, we present the implementation of a seventh-order, minimally-dissipative mapped WENO (WENO7M) scheme in a newly developed direct numerical simulation (DNS) code called KAUST Adaptive Reactive Flows Solver (KARFS). In order to make efficient use of the computer resources and reduce the solution time, without compromising the resolution requirement, the WENO routines are accelerated via graphics processing unit (GPU) computation. The performance characteristics and scalability of the code are studied using different grid sizes and block decomposition. Furthermore, the performance portability of KARFS is demonstrated on a variety of architectures including NVIDIA Tesla P100 GPUs and NVIDIA Kepler K20X GPUs. In addition, the capability and potential of the newly implemented WENO7M scheme in KARFS to perform DNS of compressible flows is also demonstrated with model problems involving shocks, isotropic turbulence, detonations and flame propagation into a stratified mixture with complex chemical kinetics.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

Structural evolution in Au- and Pd-based metallic glass forming liquids and the case for improved molecular dynamics force fields

The results of a combined experimental and computational investigation of the structural evolution of Au 81 Si 19 , Pd 82 Si 18 , and Pd 77 Cu 6 Si 17 metallic glass forming liquids are presented. Electrostatically levitated metallic liquids are prepared, and synchrotron x-ray scattering studies are combined with embedded atom method molecular dynamics simulations to probe the distribution of relevant structural units. Metal–metalloid based metallic glass forming systems are an extremely important class of materials with varied glass forming ability and mechanical processibility. High quality experimental x-ray scattering data are in poor agreement with the data from the molecular dynamics simulations, demonstrating the need for improved interatomic potentials. The first peak in the x-ray static structure factor in Pd 77 Cu 6 Si 17 displays evidence for a Curie–Weiss type behavior but also a peak in the effective Curie temperature. In conclusion, a proposed order parameter distinguishing glass forming ability, 1/(S(T,q 1 )−1, shows a peak in the effective Curie temperature near a crossover temperature established by the behavior of the viscosity, T A .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Processing MCNP Elemental Edit Outputs

The Monte Carlo N-Particle (MCNP) transport code version 6 (also known as MCNP6) has the capability for tracking particles on unstructured mesh (UM) geometry models embedded into constructive solid geometry (CSG) cells. A UM geometry is a collection of elements representing a solid geometry. The first step of MCNP UM modeling is using other software packages to create a finite element mesh representation of a solid 3D geometry. Computer-aided design (CAD) or computer-aided manufacturing (CAM) software is typically used to create a solid geometry model, which is later imported into mesh generation software to create a UM model. The MCNP UM feature was originally designed for models generated by the Abaqus/CAE software. The MCNP code version 6.0 and later can process UM models formatted as Abaqus input files. MCNP can process a UM model consisting of several different element types including linear tetrahedral or hexahedral elements and calculate quantities of interest such as flux and energy deposition at elements. An MCNP UM simulation provides high-fidelity elemental edit (i.e., tally) outputs, which can be further used in multiphysics calculations. The MCNP UM feature was used for multiphysics simulations where quantities of interest calculated by MCNP are used as inputs for heat transfer calculations in Abaqus. MCNP6.3 can produce two types of elemental edit output (EEOUT) file formats: ASCII and HDF5. An EEOUT file type must be requested on an EMBED card while output type (flux or energy deposition) must be requested on an EMBEE card. We wrote Python3 scripts to extract energy deposition values in an ASCII or HDF5 EEOUT file and compute a heat flux profile for an Abaqus heat transfer calculation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2019

The Buzzard Flock: Dark Energy Survey Synthetic Sky Catalogs

We present a suite of 18 synthetic sky catalogs designed to support science analysis of galaxies in the Dark Energy Survey Year 1 (DES Y1) data. For each catalog, we use a computationally efficient empirical approach, ADDGALS, to embed galaxies within light-cone outputs of three dark matter simulations that resolve halos with masses above ~5x10^12 h^-1 m_sun at z <= 0.32 and 10^13 h^-1 m_sun at z~2. The embedding method is tuned to match the observed evolution of galaxy counts at different luminosities as well as the spatial clustering of the galaxy population. Galaxies are lensed by matter along the line of sight --- including magnification, shear, and multiple images --- using CALCLENS, an algorithm that calculates shear with 0.42 arcmin resolution at galaxy positions in the full catalog. The catalogs presented here, each with the same LCDM cosmology (denoted Buzzard), contain on average 820 million galaxies over an area of 1120 square degrees with positions, magnitudes, shapes, photometric errors, and photometric redshift estimates. We show that the weak-lensing shear catalog, redMaGiC galaxy catalogs and redMaPPer cluster catalogs provide plausible realizations of the same catalogs in the DES Y1 data by comparing their magnitude, color and redshift distributions, angular clustering, and mass-observable relations, making them useful for testing analyses that use these samples. We make public the galaxy samples appropriate for the DES Y1 data, as well as the data vectors used for cosmology analyses on these simulations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Multi-plane moment-of-fluid interface reconstruction in 3D

Moment-of-fluid (MOF) methods for interface reconstruction approximate the region occupied by material in each mesh element only through reference to its geometric moments. Here, we present a 3D MOF method that represents the material (POM) in each cell as the convex intersection of the cell and multiple half-spaces, each selected to minimize the least-squares error between computed moments of the approximated material and provided reference moments. This optimization problem is highly non-linear and non-convex, making the numerical result very sensitive to the initial guess. To create an effective initial guess in each cell, we construct an ellipsoid from 0th–2nd order reference moments such that its shape corresponds with that of the POM. Within this ellipsoid we inscribe a polyhedron, and initialize the minimization problem with the half-spaces defined by each of its faces. The inscribed polyhedron has minimally 4 faces, and using up to 3rd order moments permits optimization over up to 20 unknown values. We therefore define MOF methods that utilize 4, 5, or 6 half-spaces, correspondingly initialized with the faces of a single inscribed tetrahedron, triangular prism, or hexahedron. Stability of the non-linear optimization is further improved with a prepossessing step that normalizes the reference moments according to the axes of the reference ellipsoid. Using this approach, the non-linear least-squares solver reliably converges to a near-global minimum from a single initial guess. We demonstrate accuracy and robustness using single-cell and multi-cell examples over a wide spectrum of geometry. In particular, we demonstrate our ability to exactly reproduce several important and complex features defined by up to four half-spaces, such as corners, filaments, filament tips, and embedded material in the cell.

3D interface reconstruction↗
DOE OSTI2024

Enhancing quantum annealing accuracy through replication-based error mitigation *

Abstract Quantum annealers like those manufactured by D-Wave Systems are designed to find high quality solutions to optimization problems that are typically hard for classical computers. They utilize quantum effects like tunneling to evolve toward low-energy states representing solutions to optimization problems. However, their analog nature and limited control functionalities present challenges to correcting or mitigating hardware errors. As quantum computing advances towards applications, effective error suppression is an important research goal. We propose a new approach called replication based mitigation (RBM) based on parallel quantum annealing (QA). In RBM, physical qubits representing the same logical qubit are dispersed across different copies of the problem embedded in the hardware. This mitigates hardware biases, is compatible with limited qubit connectivity in current annealers, and is well-suited for currently available noisy intermediate-scale quantum annealers. Our experimental analysis shows that RBM provides solution quality on par with previous methods while being more flexible and compatible with a wider range of hardware connectivity patterns. In comparisons against standard QA without error mitigation on larger problem instances that could not be handled by previous methods, RBM consistently gets better energies and ground state probabilities across parameterized problem sets.

Djidjev, Hristo N. (ORCID:0000000192868824)↗
DOE OSTI2020

Reinforcement Learning via Gaussian Processes with Neural Network Dual Kernels

While deep neural networks (DNNs) and Gaussian Processes (GPs) are both popularly utilized to solve problems in reinforcement learning, both approaches feature undesirable drawbacks for challenging problems. DNNs learn complex non-linear embeddings, but do not naturally quantify uncertainty and are often data-inefficient to train. GPs infer posterior distributions over functions, but popular kernels exhibit limited expressivity on complex and high-dimensional data. Fortunately, recently discovered conjugate and neural tangent kernel functions encode the behavior of overparameterized neural networks in the kernel domain. We demonstrate that these kernels can be efficiently applied to regression and reinforcement learning problems by analyzing a baseline case study.We apply GPs with neural network dual kernels to solve reinforcement learning tasks for the first time. We demonstrate, using the well understood mountain-car problem, that GPs empowered with dual kernels perform at least as well as those using the conventional radial basis function kernel. Finally, we conjecture that by inheriting the probabilistic rigor of GPs and the powerful embedding properties of DNNs, GPs using NN dual kernels will empower future reinforcement learning models on difficult domains.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Systematic Evaluation of Backdoor Data Poisoning Attacks on Image Classifiers

Backdoor data poisoning attacks have recently been demonstrated in computer vision research as a potential safety risk for machine learning (ML) systems. Traditional data poisoning attacks manipulate training data to induce unreliability of an ML model, whereas backdoor data poisoning attacks maintain system performance unless the MLmodel is presented with an input containing an embedded“trigger” that provides a predetermined response advantageous to the adversary. Our work builds upon prior back-door data-poisoning research for ML image classifiers and systematically assesses different experimental conditions including types of trigger patterns, persistence of trigger patterns during retraining, poisoning strategies, architectures (ResNet-50, NasNet, NasNet-Mobile), datasets (Flowers, CIFAR-10), and potential defensive regularization techniques (Contrastive Loss, Logit Squeezing, Manifold Mixup,Soft-Nearest-Neighbors Loss). Experiments yield four key findings. First, the success rate of backdoor poisoning at-tacks varies widely, depending on several factors, including model architecture, trigger pattern and regularization technique. Second, we find that poisoned models are hard to detect through performance inspection alone. Third, regularization typically reduces backdoor success rate, although it can have no effect or even slightly increase it, depending on the form of regularization. Finally, backdoors inserted through data poisoning can be rendered ineffective after just a few epochs of additional training on a small set of clean data without affecting the model’s performance.

Truong, Loc T.↗
DOE OSTI2020

Two-Layer Dynamic Recycling Model (2L-DRM): Learning from Moisture Tracking Models of Different Complexity

Atmospheric moisture tracking models are used to identify and quantify sources and sinks of water in the atmospheric branch of the hydrologic cycle. These models are primarily used to investigate the origin of moisture resulting in precipitation for particular regions around the globe. Moisture tracking models vary widely in their level of complexity, depending on the number of physical processes represented. Complex models are comprehensive in their physical representation, but computationally much more expensive than simple models, which only focus on specific physical processes and use simplifying assumptions. We present the mathematical derivation of the new two-layer dynamical recycling model (2L-DRM), a simple analytical moisture tracking model that relaxes the vertically-integrated formulation of the original one-layer DRM (Dominguez et al., 2006). By comparing the simple DRM to a very complex moisture tracking model that uses water vapor tracers embedded within the Weather Research and Forecast regional climate model (WRF-WVT) for the North American Monsoon region, we pinpoint the absence of vertical wind shear as the main deficiency in the simple DRM. When comparing both simple models (DRM and 2L-DRM) to the WRF-WVT (which we treat as ‘truth’), the 2L-DRM better captures the spatial extent, the net amount and the temporal variability of precipitation that originates from oceanic and local terrestrial sources. The 2L-DRM is well suited to study the large-scale climatological sources of moisture, and for these applications, performs on-par with the much more complex and computationally demanding WRF-WVT model.

Dominguez, Francina↗
DOE OSTI2018

Improved Hybrid Modeling of Spent Fuel Storage Facilities

This work developed a new computational method for improving the ability to calculate the neutron flux in deep-penetration radiation shielding problems that contain areas with strong streaming. The “gold standard” method for radiation transport is Monte Carlo (MC) as it samples the physics exactly and requires few approximations. Historically, however, MC was not useful for shielding problems because of the computational challenge of following particles through dense shields. Instead, deterministic methods, which are superior in term of computational effort for these problems types but are not as accurate, were used. Hybrid methods, which use deterministic solutions to improve MC calculations through a process called variance reduction, can make it tractable from a computational time and resource use perspective to use MC for deep-penetration shielding. Perhaps the most widespread and accessible of these methods are the Consistent Adjoint Driven Importance Sampling (CADIS) and Forward-Weighted CADIS (FW-CADIS) methods. For problems containing strong anisotropies, such as power plants with pipes through walls, spent fuel cask arrays, active interrogation, and locations with small air gaps or plates embedded in water or concrete, hybrid methods are still insufficiently accurate. In this work, a new method for generating variance reduction parameters for strongly anisotropic, deep penetration radiation shielding studies was developed. This method generates an alternate form of the adjoint scalar flux quantity, Φ Ω , which is used by both CADIS and FW-CADIS to generate variance reduction parameters for local and global response functions, respectively. The new method, called CADIS-Ω, was implemented in the Denovo/ADVANTG software. Results indicate that the flux generated by CADIS-Ω incorporates localized angular anisotropies in the flux more effectively than standard methods. CADIS-Ω outperformed CADIS in several test problems. This initial work indicates that CADIS- may be highly useful for shielding problems with strong angular anisotropies. This is a benefit to the public by increasing accuracy for lower computational effort for many problems that have energy, security, and economic importance.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2019

Spin-State Ordering in Metal-Based Compounds Using the Localized Active Space Self-Consistent Field Method

Quantitatively accurate calculations for spin-state ordering in transition-metal complexes typically demand a robust multiconfigurational treatment. The poor scaling of such methods with increasing size makes them impractical for large, strongly correlated systems. Density matrix embedding theory (DMET) is a fragmentation approach that can be used to specifically address this challenge. The single-determinantal bath framework of DMET is applicable in many situations, but it has been shown to perform poorly for molecules characterized by strong correlation when a multiconfigurational self-consistent field solver is used. To ameliorate this problem, the localized active space self-consistent field (LASSCF) method was recently described. Here in this work, LASSCF is applied to predict spin-state energetics in mono- and di-iron systems, and we show that the model offers an accuracy equivalent to that of CASSCF but at a substantially lower computational cost. Performance as a function of basis set and active space is also examined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

A Visual Analytics Framework for the Detection of Anomalous Call Stack Trees in High Performance Computing Applications

Anomalous runtime behavior detection is one of the most important tasks for performance diagnosis in High Performance Computing (HPC). Most of the existing methods find anomalous executions based on the properties of individual functions, such as execution time. However, it is insufficient to identify abnormal behavior without taking into account the context of the executions, such as the invocations of children functions and the communications with other HPC nodes. We improve upon the existing anomaly detection approaches by utilizing the call stack structures of the executions, which record rich temporal and contextual information. With our call stack tree (CSTree) representation of the executions, we formulate the anomaly detection problem as finding anomalous tree structures in a call stack forest. The CSTrees are converted to vector representations using our proposed stack2vec embedding. Structural and temporal visualizations of CSTrees are provided to support users in the identification and verification of the anomalies during an active anomaly detection process. Furthermore, three case studies of real-world HPC applications demonstrate the capabilities of our approach.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Super Resolving Unrolled Neural Networks for Remote Sensing

In remote sensing systems, the capabilities of the system are constrained by the complex interactions between size, weight, and power (SWAP) of potential designs. In electro-optical (EO) systems, examples of these critical parameters include the system’s sensitivity and resolution. Those parameters can be increased by ever larger optical apertures and focal planes but at the cost of more SWAP. Multi-image super resolution (MISR) techniques allow resolution to be enhanced via computation rather than more sophisticated optical hardware. These algorithms combine multiple images together into a single, higher resolution image, trading temporal resolution and computation for spatial resolution. Fielded MISR techniques, such as Drizzle, can require several hundred images to create a single super resolved image, implying reduced temporal resolution, increased data acquisition load, and limiting mission applications. Iterative techniques, such as model-based image reconstruction and compressive sensing, have been shown to create super resolved images using fewer images than Drizzle. They do this by posing an optimization problem that balances accuracy between a highly accurate physical model and an image model. In the case of super resolution, the physical model is defined by the relation between low resolution input images and the desired high resolution output image. The image model encodes some assumptions about the super resolved image. These assumptions are meant to suppress reconstruction artifacts that arise due to deterministic physical model error, stochastic measurement noise, and potential undersampling. In practice, the performance of iterative methods are limited by imaging models compatible with optimization. Deep learning-based methods can effectively learn image models of arbitrary complexity, but lack the theoretical explainability and robustness of iterative techniques. Consensus equilibrium (CE) generalizes the iterative techniques beyond optimization, enabling blackbox algorithms such as traditional and neural image denoisers to be used as the image model. CE-based approaches retain much of the explainability and robustness of iterative techniques while allowing the expressiveness of machine learning image models to be used. Additionally, by unrolling iterations of CE with an embedded image denoiser, the image denoiser can be further trained and specialized to the specific application with potentially higher quality reconstructions. Under this project, we demonstrated the feasibility of training an unrolled neural network based upon CE. While we didn’t train one, we showed that the CE process is differentiable and its gradient can be tractably computed. We also explored the usage of a variants of CE akin to generative neural works. Most importantly, we applied the CE framework to a number of problems including non-blind deconvolution, upsampling, single-image super resolution, MISR, event-based sensing, and saturated deconvolution. Our MISR prototype creates high quality reconstructions with an order of magnitude fewer images than previous approaches and, critically, produces these reconstructions fast enough for practical usage.

47 OTHER INSTRUMENTATION↗
DOE OSTI2018

Microscale-Resolution Thermal Mapping Using a Flexible Platform of Patterned Quantum Sensors

Here, temperature sensors with micro- and nanoscale spatial resolution have long been explored for their potential to investigate the details of physical systems at an unprecedented scale. In particular, the rapid miniaturization of transistor technology, with its associated steep boost in power density, calls for sensors that accurately monitor heating distributions. Here, we report on a simple and scalable fabrication approach, based on directed self-assembly and transfer-printing techniques, to constructing arrays of nanodiamonds containing temperature-sensitive fluorescent spin defects. The nano-particles are embedded within a low-thermal-conductivity matrix that allows for repeated use on a wide range of systems with minimal spurious effects. Additionally, we demonstrate access to a wide spectrum of array parameters ranging from sparser single-particle arrays, with the potential for quantum computing applications, to denser devices with 98 ± 0.8% yield and stronger photoluminescence signals, ideal for temperature measurements. With these, we experimentally reconstruct the temperature map of an operating coplanar waveguide to confirm the accuracy of these platforms.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

Active learning of a crystal plasticity flow rule from discrete dislocation dynamics simulations

Continuum-scale material deformation models, such as crystal plasticity (CP), can significantly enhance their predictive accuracy by incorporating input from lower-scale (i.e. mesoscale) models. The procedure to generate and extract the relevant information is however typically complex and ad hoc, involving decision and intervention by domain experts, leading to long development times. In this study, we develop a principled approach for calibration of continuum-scale models using lower scale information by representing a CP flow rule as a Gaussian process model. This representation allows for efficient parameter space exploration, guided by the uncertainty embedded in the model through a process known as Bayesian optimization (BO). We demonstrate a semi-autonomous BO loop which instantiates discrete dislocation dynamics simulations whose initial conditions are automatically chosen to optimize the uncertainty of a model CP flow rule. Our self-guided computational pipeline efficiently generated a dataset and corresponding model whose error, uncertainty, and physical feature sensitivities were validated with comparison to an independent dataset four times larger, demonstrating a valuable and efficient active learning implementation readily transferable to similar material systems.

36 MATERIALS SCIENCE↗
DOE OSTI2021

A closer look at corrosion of steel reinforcement bars in concrete using 3D neutron and X-ray computed tomography

Corrosion of reinforcing bars constitutes the largest threat to the durability of concrete structures. Thus, several studies have investigated the nature of the corrosion products, most using post-mortem analyses. However, corrosion products evolve when in contact with oxygen, hindering result interpretation. This work presents instead a state-of-the-art, non-destructive 3D method for the assessment of corrosion of embedded reinforcements. Multimodal neutron and X-ray tomography was used to observe, non-destructively, the characteristics of the corrosion products in two concrete samples, with the aim of investigating possible benefits of the use of this technique for reinforced concrete structures. One sample was naturally corroded, extracted from an 81-year-old bridge, the other was corroded via the galvanostatic method, resulting in corrosion-induced cracks. Quantitative and qualitative data was acquired, including the iron-to-rust volumetric ratio in macroscopic interfacial voids and the thickness of the corrosion layer at the steel concrete interface. The iron-to-rust volumetric ratio corresponded to large, soluble, corrosion products, forming in environments with low availability of oxygen for both samples.

36 MATERIALS SCIENCE↗