Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Differential Experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

A temperature and pressure controlled calibration system for pressure sensors

A data acquisition and experiment control system capable of simulating temperatures from -184 to +220 C and pressures either absolute or differential from 0 to 344.74 kPa is developed to characterize silicon pressure sensor response to temperature and pressure. System software is described that includes sensor data acquisition, algorithms for numerically derived thermal offset and sensitivity correction, and operation of the environmental chamber and pressure standard. This system is shown to be capable of computer interfaced cryogenic testing to within 1 C and 34.47 Pa of single channel or multiplexed arrays of silicon pressure sensors.

Chapman, John J.↗
NASA NTRS1992

Recent experimental measurements of space platform charging at LEO altitudes

The paper discusses some of the results of vehicle electrical potential from recent sounding rocket experiments involving charging of a space platform by both electron beam emission and by the application of differential bias between elements of the platform. Conclusions are presented that are applicable to the experimental parameters of the CHARGE-2 and SPEAR-1 payloads. The currents collected by HV biased collectors in the sphere show strong magnetic limiting and are close to the values predicted by Parker and Murphy (1967). No volume breakdown was observed above 100 km altitude by exposing voltages up to 45 kV to the ionosphere in the SPEAR-1 payload. The release of gas at flow rates typical of ACS systems can provide sufficient plasma to electronically neutralize space platforms biased at either positive or negative potentials.

Raitt, W. J.↗
NASA NTRS1993

Some aspects of high-order numerical solutions of the linear convection equation with forced boundary conditions

A six-stage low-storage Runge-Kutta time-marching method is presented and shown to be an efficient method for use with high-accuracy spatial difference operators for wave propagation problems. The accuracy of the method for inhomogeneous ordinary differential equations is demonstrated through numerical solutions of the linear convection equation with forced boundary conditions. Numerical experiments are presented simulating a sine wave and a Gaussian pulse propagating into and through the domain. For practical levels of mesh refinement corresponding to roughly ten points per wavelength, the six-stage Runge-Kutta method is more accurate than the popular fourth-order Runge-Kutta method. Further numerical experiments are presented which show that the numerical boundary scheme at an inflow boundary can be a significant source of error when high-accuracy spatial discretizations are used.

Zingg, D. W.↗
NASA NTRS1994

A new measurement of the flux of the light cosmic-ray nuclei at high energies

A new cosmic-ray detector utilizing a ring-imaging Cerenkov counter to determine the energy of light cosmic-ray nuclei was flown on high-altitude balloon from Fort Sumner, NM, in 1991 September. We describe the design and performance of this instrument and discuss the data analysis procedures. The measurement provides a new determination of the absolute flux and differential energy spectrum of the primary cosmic-ray species helium between 40 and 320 GeV/nucleon. The experiment also yields the spectra of carbon and oxygen and some information on the intensities of the secondary nuclei Li, Be, and B. A comparison between our results and previous measurements of heavier nuclei (Z greater than or equal to 4) from HEAO 3 and Spacelab 2 indicates good consistency between these measurements. The data set is compared with the results of a leaky box propagation model. We find good agreement with this model if the abundance of helium relative to oxygen at the source is taken to be 25 +/- 6 and if the source spectrum is given by a power law in energy proportional to E(exp -2.15).

Buckley, J.↗
NASA NTRS2016

Western US Tropospheric Ozone: An Assessment of Vertical and Seasonal Variations over California and Nevada

In the rural western US free-tropospheric O3 has risen in recent years as a result of rising Asian emissions, deep stratospheric intrusions and more frequent wildfires. This increasing O3 trend combined with the high surface elevation of much of the western US, which aids mixing between boundary layer and free-troposphere, pose challenges in attaining the more stringent O3 National Ambient Air Quality Standard (NAAQS) at many western US rural surface sites. As such, the ability to identify various sources and transport mechanisms that contribute towards surface O3 is increasingly important. This paper analyzes vertical profiles of O3 from the Alpha Jet Atmospheric eXperiment (AJAX) over California and Nevada, ozonesondes from Trinidad Head, CA and tropospheric ozone profiles from the differential absorption lidar (DIAL) at the JPL Table Mountain Facility, CA. Surface O3 from the US EPA Clean air Status and Trends Network (CASNET) are used to discuss surface trends. GEOS-Chem determines the trends in regional O3 and assess the contributions of various sources on surface O3. And Realtime Air Quality Modeling System (RAQMS) is used to forecast and interpret free-tropospheric observations. Specifically we will address the following questions: What are the effects of the lowered NAAQS? Do we observe elevated O3 during 2012 at surface sites reported in previous studies? And if so, what are the causes? How variable is free-tropospheric O3 over California and Nevada? How frequently do we observe high O3 lamina in the free troposphere and what are the surface impacts?

tropospheric↗
DOE OSTI2022

Stochastic Learning Approach for Binary Optimization: Application to Bayesian Optimal Design of Experiments

Here, we present a novel stochastic approach to binary optimization suited for optimal experimental design (OED) for Bayesian inverse problems governed by mathematical models such as partial differential equations. The OED utility function, namely, the regularized optimality criterion, is cast into a stochastic objective function in the form of an expectation over a multivariate Bernoulli distribution. The probabilistic objective is then solved by using a stochastic optimization routine to find an optimal observational policy. This formulation (a) is generally applicable to binary optimization problems with soft constraints and is ideal for OED and sensor placement problems; (b) does not require differentiability of the original objective function (e.g., a utility function in OED applications) with respect to the design variable, and thus it enables direct employment of sparsity-enforcing penalty functions such as $\ell_0$, without needing to utilize a continuation procedure or apply a rounding technique; (c) exhibits much lower computational cost than traditional gradient-based relaxation approaches; and (d) can be applied to both linear and nonlinear OED problems with proper choice of the utility function. The proposed approach is analyzed from an optimization perspective with detailed convergence analysis of the optimization approach and is also analyzed from a machine learning perspective with correspondence to policy gradient reinforcement learning. The approach is demonstrated numerically by using an idealized two-dimensional Bayesian linear inverse problem and validated by extensive numerical experiments carried out for sensor placement in a parameter identification setup.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

CHARGED-CURRENT DOUBLE-DIFFERENTIAL CROSS SECTION MEASUREMENT OF ELECTRON NEUTRINOS IN LOW RECOIL REGION ON HYDROCARBON AT ∼7 GEV

Measuring neutrino mixing angles, especially the CP violation phase and mass hierarchy, is one of the priorities of the neutrino community and long baseline neutrino oscillation programs, such as T2K and NOvA, provided the most precise measurements to date. One of the dominating uncertainties of the measurements is the neutrino interaction model due to the difficulty of modeling the nuclear effects from first principles. As a result, neutrino scattering experiments such as MINERvA were conducted to provide data as input to reduce this uncertainty. This thesis presents a charged-current double-differential cross section measurement of electron neutrinos using the MINERvA detector in terms of available energy (a proxy of energy transfer), three-momentum transfer, and/or transverse momentum of the final state electron. This measurement focuses on the transition region between quasi-elastic and resonance processes, where the multi-nucleon knockout process dominates. The result is compared to a modified GENIE model and similar measurements using muon neutrino samples. In addition, this measurement reproduces the photon-like excess seen by previous MINERvA electron neutrino measurements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Probing Thermal Stability of Li-Ion Battery Ni-Rich Layered Oxide Cathodes by means of Operando Gas Analysis and Neutron Diffraction

Thermal stability is a crucial parameter that must be considered within the overall performance metrics of Ni-rich layered oxide cathodes. While the intrinsic structural stability of the cathode materials under thermal conditions is important, it is also critical to consider their reaction with electrolytes. In this study, operando gas analysis, ex situ neutron diffraction, and differential scanning calorimetry were combined to give a broader picture of the thermal stability of Ni-rich NMC cathodes. Li 1– x Ni 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) composite materials with four different states of charge were investigated with and without the presence of an electrolyte. It has been found that electrolyte can greatly accelerate both the structural and thermal decomposition of the cathode materials. A higher state of charge will also make cathode materials more susceptible to thermal shock. Without an electrolyte, O 2 release inducing a structural change from layered to rock salt was the major observation during thermal runaway. However, all samples retained some levels of layered structure after annealing up to 300 °C without the electrolyte. In comparison, almost all the O3-type layered phase transformed to the rock-salt phase for the cathode materials heated with the electrolyte at the same experimental conditions. Moreover, the amount of CO 2 increased by nearly two orders of magnitude when annealing cathode materials with electrolyte in operando gas analysis experiments. More delithiated NMC811 samples released larger amounts of CO 2 at earlier onset temperatures, resonating well with the differential scanning calorimetry (DSC) results showing that more delithiated samples release more heat during thermal shock.

25 ENERGY STORAGE↗
DOE OSTI2026

Characterization of the First Prototype of the L1K65n Differential-Output Charge-Sensitive Preamplifier ASIC for High-Performance, Low-Background HPGe Detector Readout

Next-generation neutrinoless double-beta (0νββ) decay searches require a large detector/isotope mass and very low radioactive backgrounds. The upcoming LEGEND-1000 experiment (Large Enriched Germanium Experiment for Neutrinoless double-beta Decay) constitute a ton-scale array of several hundred high-purity germanium (HPGe) detectors enriched in 76Ge, the isotope of interest. It aims to reach a sensitivity beyond 10 28 years on the 0νββ decay half-life of 76Ge, necessitating an order of magnitude reduction in background with respect to the state of the art. This will require the implementation of a dedicated application specific integrated circuit (ASIC) preamplifier that will significantly lower background contribution compared to the conventional low-mass front end (LMFE) employed in the Majorana Demonstrator and LEGEND-200 experiments while maintaining or improving energy resolution and other performance parameters. Features include a high (9 MeV) dynamic range with noise low enough to achieve a trigger threshold of <1 keV, a single power supply to reduce background-inducing cabling, and a differential output to maintain signal integrity over several meters of transmission line. The chip would be optimized to operate in liquid argon (87 K) and be able to do so reliably for ten years. Following on from an earlier 180-nm prototype, we have developed a differential-output charge-sensitive preamplifier ASIC fabricated in a 65-nm process, 1×2 mm in size, that addresses these needs. Here, we present recent results from the successful testing and characterization of the first version of this device.

ASIC↗
DOE OSTI2025

Differential Ligation Alters Electronic State and Coupling Signals of Iron-Sulfur Clusters in Flavin-Based Electron Bifurcation

Flavin-based electron bifurcation (FBEB) is employed by microorganisms for controlling pools of redox equivalents by reversibly splitting electron pairs into high- and low-energy levels from an initial midpoint potential. Our ability to harness this phenomenon is crucial for biocatalytic design which is limited by our understanding of energy coupling in the bifurcation system. In Pyrococcus furiosus, FBEB is carried out by the NADH-dependent ferredoxin:NADP+-oxidoreductase (NfnSL), coupling the uphill reduction of ferredoxin in NfnL to the downhill reduction of NAD+ in NfnS from oxidation of NADPH. Flanking the bifurcating flavin are two site-differentiated iron-sulfur clusters; the nearest is a glutamate-ligated [4Fe-4S] cluster in NfnL. Recent biochemical experiments substituting the native glutamate with cysteine led to loss of coupling between the uphill and downhill pathways, in contrast to the tight thermodynamic coupling in the native system. To understand how this decoupling is biochemically manifested by the cysteine-substituted [4Fe-4S] in NfnL, we employed electron paramagnetic resonance (EPR) spectroscopy to identify changes in electronic architecture and square wave voltammetry (SWV) to probe thermodynamic shifts produced by the substitution. We observed notable g-value shifts in the EPR for the cysteine-substituted iron-sulfur cluster in addition to significant downward shifts in the redox potential, as well as the disappearance of several low-field signals observed in the native NfnSL complex. These results suggest the site-differentiated glutamate residue facilitates higher spin states in the [4Fesingle bond4S] cluster to bridge energetic gaps in electron transfer to the bifurcating flavin in the native complex, preventing unwanted short-circuiting seen in the cysteine-substituted complex.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Measurements of $W^{+}W^{-}$ production in decay topologies inspired by searches for electroweak supersymmetry

This paper presents a measurement of fiducial and differential cross-sections for $W$ + $W$ - production in proton–proton collisions at $\sqrt{s}$ = $13$ TeV with the ATLAS experiment at the Large Hadron Collider using a dataset corresponding to an integrated luminosity of 139 fb -1 . Events with exactly one electron, one muon and no hadronic jets are studied. The fiducial region in which the measurements are performed is inspired by searches for the electroweak production of supersymmetric charginos decaying to two-lepton final states. The selected events have moderate values of missing transverse momentum and the ‘stransverse mass’ variable $m$ T2 , which is widely used in searches for supersymmetry at the LHC. The ranges of these variables are chosen so that the acceptance is enhanced for direct $W$ + $W$ - production and suppressed for production via top quarks, which is treated as a background. The fiducial cross-section and particle-level differential cross-sections for six variables are measured and compared with two theoretical SM predictions from perturbative QCD calculations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Final Design for Additional Thermal/Epithermal eXperiments (TEX) with Sodium Chloride Absorbers to Provide Validation Benchmarks for TerraPower

The first set of Thermal/Epithermal eXperiments (TEX) with chlorine absorbers (TEX-Cl) were executed in Q4FY24 and are in the process of being benchmarked for the ICSBEP. TEX-Cl builds upon the TEX-HEU baseline cases that were published in the 2022 International Criticality Safety Benchmark Evaluation Project (ICSBEP) Handbook. TEX-HEU, like TEX-Pu, was designed to be modular to allow for the incorporation of various absorbers and reflectors to test nuclear data and application case needs. For example, TEX-HEU with hafnium (TEX-Hf) utilizes hafnium plates as both absorbers and reflectors, depending on the tested configuration. A second set of chlorine experiments, dubbed More TEX-Cl, are laid out in this report to meet the needs of TerraPower for chlorine validation for their Molten Chloride Fast Reactor (MCFR) systems. TerraPower’s Molten Chloride Reactor Experiment (MCRE) and MCFR are fast molten salt reactors that utilize sodium chloride (NaCl) salt eutectics as the fuel and coolant. The MCRE eutectic is a mixture of NaCl and uranium trichloride (UCl 3 ). An abundant need for chlorine absorption validation has been expressed by multiple members of the community, including Y-12 (whose needs were addressed with the first set of experiments), LANL (whose needs were addressed with the Chlorine Worth Study (CWS)), TerraPower, institute de radioprotection et de sûreté nucléaire (IRSN), Savannah River Nuclear Solutions (SNRS), and others. Of the members who have expressed interest in this validation, most are interested in the fast neutron energy region, where the 35 Cl(n,p) reaction is most prominent. New 35 Cl(n,p) differential cross section measurements performed by LANL at LANCSE show substantial changes to the cross sections (Figure 1) and may be validated through these experiments as some configurations are optimally sensitive to this cross section.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Extracellular IL-37 promotes osteogenic and odontogenic differentiation of human dental pulp stem cells via autophagy

The osteogenic and odontogenic differentiation of dental pulp stem cells (DPSCs) contribute to restoration and regeneration of dental tissue. Previous study indicated that interleukin-37 (IL-37) was an anti-inflammatory factor that affected other pro-inflammatory signals. The aim of this study was to explore the effects of IL-37 on the differentiation of DPSCs. DPSCs were cultured in growth medium with different concentrations of IL-37. We selected the optimal concentration for the following experiments by alkaline phosphatase (ALP) activity analysis, quantitative reverse-transcription polymerase chain reaction (qRT-PCR) and Western blot. Cell counting kit assay (CCK-8) and 5-Ethynyl-2-Deoxyuridine (EdU) assay were conducted to assess the effects of IL-37 on the proliferation of DPSCs. ALP activity assay and staining, alizarin red S (ARS) staining, qRT‐PCR, Western blot as well as immunofluorescence staining were conducted to assess differentiation ability of DPSCs. Western blot, immunofluorescence staining and transmission electron microscopy (TEM) were utilized to examine cell autophagy. Results showed that IL-37 enhanced the osteogenic and odontogenic differentiation ability of DPSCs with no significant influence on the proliferation of DPSCs. Autophagy in DPSCs was activated by IL-37. Activation of autophagy enhanced osteogenesis and odontogenesis of DPSCs, whereas inhibition of autophagy suppressed DPSCs osteogenic and odontogenic differentiation. In conclusion, IL-37 increased osteogenic and odontogenic differentiation via autophagy.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Differential cross-section measurements of Higgs boson production in the H → τ + τ - decay channel in pp collisions at $\sqrt{s}$ = 13 TeV with the ATLAS detector

Differential measurements of Higgs boson production in the τ-lepton-pair decay channel are presented in the gluon fusion, vector-boson fusion (VBF), VH and $t\overline{t}H$ associated production modes, with particular focus on the VBF production mode. The data used to perform the measurements correspond to 140 fb -1 of proton-proton collisions collected by the ATLAS experiment at the LHC. Two methods are used to perform the measurements: the Simplified Template Cross-Section (STXS) approach and an Unfolded Fiducial Differential measurement considering only the VBF phase space. For the STXS measurement, events are categorized by their production mode and kinematic properties such as the Higgs boson’s transverse momentum (${p}_{\textrm{T}}^{\textrm{H}}$ ), the number of jets produced in association with the Higgs boson, or the invariant mass of the two leading jets (mjj). For the VBF production mode, the ratio of the measured cross-section to the Standard Model prediction for m jj > 1.5 TeV and ${p}_{\textrm{T}}^{\textrm{H}}$ > 200 GeV (${p}_{\textrm{T}}^{\textrm{H}}$ < 200 GeV) is ${1.29}_{-0.34}^{+0.39}$ (${0.12}_{-0.33}^{+0.34}$ ). This is the first VBF measurement for the higher-${p}_{\textrm{T}}^{\textrm{H}}$ criteria, and the most precise for the lower-${p}_{\textrm{T}}^{\textrm{H}}$ criteria. The fiducial cross-section measurements, which only consider the kinematic properties of the event, are performed as functions of variables characterizing the VBF topology, such as the signed ΔΦ jj between the two leading jets. The measurements have a precision of 30%–50% and agree well with the Standard Model predictions. These results are interpreted in the SMEFT framework, and place the strongest constraints to date on the CP-odd Wilson coefficient ${c}_{H\overset{\sim }{W}}$ .

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

DUNE and MINERvA Flux Studies and a Measurement of the Charged-Current Quasielastic Antineutrino Scattering Cross Section with $<E_{\nu}> \sim 6 $ GeV on a CH Target

One of the biggest open questions in physics is the prevalence of matter over anti-matter in the present universe. One of possible answers lies in the violation of charge and parity symmetry in the lepton sector that would favor matter over anti-matter so that the universe becomes dominated by matter over time. Recent results from neutrino experiments like T2K and NOvA have indicated that there is CP violation in the leptonic sector \citep{Abe:2019vii}. However, the precise measurement of CP violation will require an unprecedented level of accuracy in these oscillation experiments. One of the challenges lies with the systematic uncertainties that come with the measurements, which include uncertainties related to the neutrino flux modeling, interaction modeling and detector related systematic uncertainties.\\ The first part of this thesis will go through the challenges related to flux uncertainties. It will discuss the flux uncertainties related to hadron production in the LBN F beamli ne for the DUNE experiment. Hadron production models used in flux simulations vary widely depending on the simulation and choice of physics models used to simulate the hadron production. This thesis will explain the method of using existing hadron production data to constrain these uncertainties, a method which has been used in MINERvA experiment.\\ The second part of the thesis goes through the effect of possible flux mismodeling and MINERvA's approach to address this effect. In doing so, we discovered that the suspected mismodeling could also result from incorrect estimation of the energy scale of the muons. This project not only demonstrated the challenges of flux modeling but also led to a novel approach of using neutrino energy spectra to understand the correlation between detector and neutrino beamline parameters. \\ A high statistics measurement of the anti-neutrino scattering cross section in the charged current quasielastic (CCQE) channel is the final part of the th esis. Th e 2-body interactions in this channel have the advantage of allowing reconstruction of the interaction kinematics from the outgoing muon trajectory which can be measured very well. Double differential cross sections as a function of muon kinematics, one of the deliverables of this analysis, will help future oscillation experiments understand their data. The cross-section as a function of the four-momentum transferred from the leptonic system to the hadronic system ($Q^{2}_{QE}$) can be used to test models used in simulating antineutrino interactions and the nuclear effects that can modify the predicted cross sections. Nuclear effects arise from the complex nuclear environment and both modify the initial scattering and change the fate of the particles produced from in neutrino-nucleus interactions. Study of nuclear effects will help to understand the structure of the atomic nucleus and its impact on neutrino interactions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Bayesian Monte Carlo Evaluation Framework for Cross Sections Nuclear Data and Integral Benchmark Experiments

The new Bayesian Monte Carlo (MC) evaluation framework described in this abstract has been conceived as an attempt to improve nuclear data evaluations of differential crosssection data by removing the following two approximations conventionally employed for nuclear data evaluations: all probability density functions (PDFs) of all data and model parameters, both prior and posterior, are assumed to be normal (i.e., Gaussian) PDFs, and all uncertainties and covariances are propagated using a linear approximation. With these approximations removed, the Bayesian MC (BMC) framework could be used to account for nonlinear effects and would enable improved evaluations of differential cross sections and IBE data that are presently performed based on the assumptions itemized above. The BMC would also improve upon the uniform sampling of IBE parameters from within ranges defined by their evaluated uncertainties.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

New constraints on ultraheavy dark matter from the LZ experiment

Points representing the 90% confidence level upper limits assuming two contrasting dark matter models. First, a spin-independent, scattering model in which the differential cross section for the DM-nucleus elastic scattering scales as A^4 with the DM-nucleon elastic scattering differential cross section (A is the nuclear mass number). Second, a spin-independent, scattering model in which no coherent enhancement of the per-nucleon cross section is assumed. This can be interpreted as billiard ball scattering between the dark matter particle and the target nucleus. The upper limit corresponding to the MIMP search analysis ("ms"), and the extrapolated limit from the WIMP search analysis to high dark matter masses ("ss") are shown in each case. The points are expressed in units of GeV/c^2 and cm^2 for mass and cross section, respectively.

Source record↗
DOE OSTI2021

First Muon Neutrino on Argon Cross Section Measurements With an Off-Axis Beam

While over ninety years have passed since neutrinos were first predicted in 1930 by Wolfgang Pauli, much about them is still unknown [20]. How many types of neutrinos there are, how precisely neutrinos change flavor, and how neutrinos interact with various types of matter are largely unanswered questions that have implications for fields beyond particle physics, such as cosmology and astrophysics. The final question can be answered partially by differential cross section measurements, two of which constitute the primary result of this thesis. The NeUtrinos at the Main Injector (NuMI) Beam at Fermilab in Batavia, IL provides a source of muon neutrinos and muon antineutrinos to the MicroBooNE experiment, an 85 ton liquid argon time projection chamber (LArTPC). The technology allows for high precision particle tracking and energy reconstruction that can be used to make cross section measurements. Necessary work for making these measurements for which the author of this thesis made an essential contribution is presented in detail in References [21] [22] [11] [23]. The measurement presented in this thesis is made with 2.187e20 Protons on Target (POT), the standard metric for an amount of beam exposure, of data when the beam was in forward horn current mode. Single-differential cross section measurements in terms of muon candidate kinetic energy and direction are made, and their statistical fits with simulation are 5.8 (12 d.o.f.) and 11.4 (10 d.o.f.), respectively. This indicates that the muon kinematics for muon neutrino and muon antineutrino charged-current (CC) events primarily in the energy range [0-3] GeV can be trusted for oscillation experiments, including DUNE, because of the agreement to within the associated systematic and statistical uncertainties between the measurement and the model in every bin of both single-differential cross sections. This result adds to the corresponding result for the Booster Neutrino Beam (BNB) because it covers a completely different energy region than that measurement, a double-differential cross section in terms of muon momentum and direction [14]. This result contributes to reducing the uncertainty in near-far event rate comparisons in long baseline neutrino experiments and also adds to existing knowledge of the neutrino-nucleus interaction by describing the outgoing muon kinematics in interactions of muon neutrinos and muon antineutrinos. This result is the first-ever measurement of differential cross sections of muon neutrinos and muon antineutrinos in liquid argon made with an off-axis beam.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗