SEARCH · Engineering Papers

Results for “Defects in solids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Thermal Hydroquinone Oxidation on Co/N-doped Carbon Proceeds by a Band-Mediated Electrochemical Mechanism

Molecules catalyze aerobic oxidation reactions via redox cycling at the metal center to effect sequential activation of O 2 and the substrate. Metal surfaces can catalyze the same transformations by coupling independent half-reactions for oxygen reduction and substrate oxidation mediated via the exchange of band-electrons. Metal/nitrogen-doped carbons (MNCs) are promising catalysts for aerobic oxidation that consist of molecule-like active sites embedded in a conductive carbon host. Owing to their combining molecular and metallic features, it remains unclear whether they proceed via the sequential redox cycling pathways of molecules or the band-mediated pathways of metals. Herein, we simultaneously track the potential of the catalyst and the rate of the turnover of aerobic hydroquinone oxidation on a cobalt-based MNC catalyst contacted to a catalytically inactive carbon electrode. By comparing operando measurements of rate and potential with the current-voltage behavior of each constituent half-reaction under identical conditions, we show that these molecular materials can display the band-mediated reaction mechanisms of extended metallic solids. Further, we show that the action of these band-mediated mechanisms explains fractional reaction orders in both oxygen and hydroquinone, the time evolution of catalyst potential and rate, and the dependence of rate on overall reaction free energy. Selective poisoning experiments suggest that oxygen reduction proceeds at cobalt sites, whereas quinone oxidation proceeds at native oxidic defects on the carbon. These findings highlight that molecule-like active sites can take advantage of band-mediated mechanisms when coupled to conductive hosts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Observation of formation and local structures of metal-organic layers via complementary electron microscopy techniques

Abstract Metal-organic layers (MOLs) are highly attractive for application in catalysis, separation, sensing and biomedicine, owing to their tunable framework structure. However, it is challenging to obtain comprehensive information about the formation and local structures of MOLs using standard electron microscopy methods due to serious damage under electron beam irradiation. Here, we investigate the growth processes and local structures of MOLs utilizing a combination of liquid-phase transmission electron microscopy, cryogenic electron microscopy and electron ptychography. Our results show a multistep formation process, where precursor clusters first form in solution, then they are complexed with ligands to form non-crystalline solids, followed by the arrangement of the cluster-ligand complex into crystalline sheets, with additional possible growth by the addition of clusters to surface edges. Moreover, high-resolution imaging allows us to identify missing clusters, dislocations, loop and flat surface terminations and ligand connectors in the MOLs. Our observations provide insights into controllable MOL crystal morphology, defect engineering, and surface modification, thus assisting novel MOL design and synthesis.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Will high-entropy carbides and borides be enabling materials for extreme environments?

Abstract The concept of multi-principal component has created promising opportunities for the development of novel high-entropy ceramics for extreme environments encountered in advanced turbine engines, nuclear reactors, and hypersonic vehicles, as it expands the compositional space of ceramic materials with tailored properties within a single-phase solid solution. The unique physical properties of some high-entropy carbides and borides, such as higher hardness, high-temperature strength, lower thermal conductivity, and improved irradiation resistance than the constitute ceramics, have been observed. These promising properties may be attributed to the compositional complexity, atomic-level disorder, lattice distortion, and other fundamental processes related to defect formation and phonon scattering. This manuscript serves as a critical review of the recent progress in high-entropy carbides and borides, focusing on synthesis and evaluations of their performance in extreme high-temperature, irradiation, and gaseous environments.

36 MATERIALS SCIENCE↗

NASA NTRS1974

Radial and directional solidification of metallic systems in space

Investigation of the solidification behavior of spherical specimens of Ni-12 wt % Sn and Ni-1 wt % Ag that froze radially from the surface toward the center and cylindrical specimens of Al-33 wt % Cu eutectic that froze directionally under appropriately selected conditions of thermal gradient at the solid-liquid interface and growth rate. Possible effects of vacuum and low gravity conditions, under which the spherical specimens were processed, on observed nucleation and growth phenomena are discussed. A genetic explanation is given of observed microstructures, and the distributions of alloying elements is discussed. In directionally solidified eutectic specimens a comparison is made between statistically evaluated growth defects in Skylab and in ground specimens.

Katamis, T. Z.↗

NASA NTRS1989

Microparticle impacts in space: Results from Solar Max and shuttle witness plate inspections

The Solar Maximum Satellite developed electronic problems after operating successfully in space for several years. Astronauts on Space Shuttle mission STS-41C retrieved the satellite into the orbiter cargo bay, replaced defective components, and re-deployed the repaired satellite into orbit. The defective components were returned to Earth for study. The space-exposed surfaces were examined. The approach and objectives were to: document morphology of impact; find and analyze projectile residue; classify impact by origin; determine flux distribution; and determine implications for space exposure. The purpose of the shuttle witness plate experiment was to detect impacts from PAM D2 solid rocket motor; determine flux and size distribution of particles; and determine abrasion effects on various conditions. Results are given for aluminum surfaces, copper surfaces, stainless steel surfaces, Inconel surfaces, and quartz glass surfaces.

Mckay, David S.↗

NASA NTRS1995

Evaluation of control parameters for Spray-In-Air (SIA) aqueous cleaning for shuttle RSRM hardware

HD-2 grease is deliberately applied to Shuttle Redesigned Solid Rocket Motor (RSRM) D6AC steel hardware parts as a temporary protective coating for storage and shipping. This HD-2 grease is the most common form of surface contamination on RSRM hardware and must be removed prior to subsequent surface treatment. Failure to achieve an acceptable level of cleanliness (HD-2 calcium grease removal) is a common cause of defect incidence. Common failures from ineffective cleaning include poor adhesion of surface coatings, reduced bond performance of structural adhesives, and failure to pass cleanliness inspection standards. The RSRM hardware is currently cleaned and refurbished using methyl chloroform (1,1,1-trichloroethane). This chlorinated solvent is mandated for elimination due to its ozone depleting characteristics. This report describes an experimental study of an aqueous cleaning system (which uses Brulin 815 GD) as a replacement for methyl chloroform. Evaluation of process control parameters for this cleaner are discussed as well as cleaning mechanisms for a spray-in-air process.

Davis, S. J.↗

DOE OSTI2022

Wide bandgap semiconductor materials and devices

The technological and societal impacts of electronic devices based on Ge, Si, and compound semiconductors like GaAs have been profound, fueling the decades long quest in identifying ever-larger bandgap semiconductors to untap new applications and possibilities. Specifically, an increase in the bandgap leads to shorter wavelength emission and an increased breakdown electric field, which has direct consequences for solid-state lighting like light-emitting diodes (LEDs) and laser diodes (LDs) from the visible (blue-green, blue, and violet) and beyond (UV and deep-UV) spectral range and for radically improved power devices supported by a higher intrinsic breakdown strength. Wide bandgap (WBG) semiconductors represent the frontier of materials that satisfy these criteria and include group IV, III–V, and II–VI material families like SiC (3.2 eV), GaN (3.4 eV), and ZnO (3.4 eV), respectively. With even larger bandgaps exceeding 4 eV, ultrawide bandgap (UWBG) semiconductors include diamond, III-nitrides incorporating Al and B (e.g., AlN, BN, and AlGaN), and sesquioxides like Ga 2 O 3 and (Al,Ga) 2 O 3 . These materials span widely varying stages of technological maturity, with SiC and GaN platforms among the most mature with commercially available devices in RF and high-power electronics, while other platforms such as Ga 2 O 3 rapidly advancing and poised to enable new UV and deep-UV optoelectronic devices. This Special Topic on Wide Bandgap Semiconductor Materials and Devices covers broad research subtopics on WBG and UWBG materials that span bulk crystals, epitaxy and substrate technologies, fundamental defect science, and doping, as well as electronic and optoelectronic device fabrication and characterization. Here, we highlight works from the collection, which we categorize by material platform of SiC, III-nitrides, and Ga 2 O 3 and related alloys.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Single Crystals of Vanadium Oxides as a Lens for Understanding Structural and Electronic Phase Transformations, Ion Transport, Chemo-Mechanical Coupling, and Electrothermal Neuronal Emulation

Vanadium oxides cystallize in a diverse array of structures and compositions arising from the redox versatility of vanadium, variable covalency of V−O bonds, and myriad coordination geometries. Their open frameworks present abundant interstitial sites that enable insertion of guest-ions. In such compounds, V3d electron and spin localization and disorder couple strongly to structural preferences. The rich structural diversity manifests as a “rugged” free energy landscape with multiple interconvertible polymorphs. Such a landscape sets up structural, electronic, and magnetic transitions that underpin the promise of these materials as ion-insertion battery electrodes; compact primitives for brain-inspired computing, and heterogeneous catalysts. Here, we examine the structural and compositional diversity, electronic instabilities, defect dynamics, structure transformations, mechanical properties, and surface structure of vanadium oxides using single crystals as a distinctive lens. Single crystals enable the measurement of structure−function correlations without the ensemble and orientational averaging inevitable in polycrystalline materials. Their well-defined surfaces further enable examination of facet-dependent reactivity toward molecular adsorbates, ion fluxes, and lattice (mis)matched solids. We provide a comprehensive account of vanadium-oxide single-crystal studies, from delineation of common structural motifs to single-crystal growth techniques, topochemical modification strategies, mechanisms underpinning electronic instabilities, and implementation as electrothermal neurons and battery electrode materials.

Ponis, John [Texas A&M University, College Station↗

DOE OSTI2022

Manufacturing Science

The Manufacturing Science area of leadership spans the application of fundamental science research and development activities to understand the critical steps in manufacturing processes for the purposes of control and optimization. Although manufacturing is an applied area of research, fundamental science underpins our knowledge of both traditional and transformational manufacturing processes. For example, casting, welding, and many modern additive manufacturing processes that see wide use are broadly classified as solidification processes, with material transitioning from liquid to solid phases upon cooling from higher temperature. However, our understanding of the detailed physics involved in such processes is incomplete, and solidification remains a grand challenge for materials science. To enable adoption of transformative fabrication processes or to accelerate development of traditional ones, it is necessary to develop a detailed mechanistic understanding spanning multiple scales, starting with atomic building blocks (defects, interfaces, composition) and extending all the way up to macroscale performance in moderate and/or extreme environments.

36 MATERIALS SCIENCE↗

NASA NTRS1983

Flight service evaluation of Kevlar-49 epoxy composite panels in wide-bodies commercial transport aircraft

Kevlar-49 fairing panels, installed as flight service components on three L-1011s, were inspected after 9 years of service. There are six Kevlar-49 panels on each aircraft: a left hand and right hand set of a wing body sandwich fairing; a solid laminate under wing fillet panel; and a 422 K (300 F) service aft engine fairing. The fairings have accumulated a total of 70,000 hours, with one ship set having over 24,000 hours service. The Kevlar-49 components were found to be performing satisfactorily in service with no major problems, or any condition requiring corrective action. The only defects noted were minor impact damage, a few minor disbonds and a minor degree of fastener hole fraying and elongation. These are for the most part comparable to damage noted on fiberglass fairings. The service history to date indicates that Kevlar-49 epoxy composite materials have satisfactory service characteristics for use in aircraft secondary structure.

Stone, R. H.↗

NASA NTRS1998

Feasibility Assessment of Thermal Barrier Seals for Extreme Transient Temperatures

The assembly joints of modem solid rocket motor cases are generally sealed using conventional O-ring type seals. The 5500+ F combustion gases produced by rocket motors are kept a safe distance away from the seals by thick layers of phenolic insulation. Special compounds are used to fill insulation gaps leading up to the seals to prevent a direct flowpath to them. Design criteria require that the seals should not experience torching or charring during operation, or their sealing ability would be compromised. On limited occasions, NASA has observed charring of the primary O-rings of the Space Shuttle solid rocket nozzle assembly joints due to parasitic leakage paths opening up in the gap-fill compounds during rocket operation. NASA is investigating different approaches for preventing torching or charring of the primary O-rings. One approach is to implement a braided rope seal upstream of the primary O-ring to serve as a thermal barrier that prevents the hot gases from impinging on the O-ring seals. This paper presents flow, resiliency, and thermal resistance for several types of NASA rope seals braided out of carbon fibers. Burn tests were performed to determine the time to burn through each of the seals when exposed to the flame of an oxyacetylene torch (5500 F), representative of the 5500 F solid rocket motor combustion temperatures. Rope seals braided out of carbon fibers endured the flame for over six minutes, three times longer than solid rocket motor burn time. Room and high temperature flow tests are presented for the carbon seals for different amounts of linear compression. Room temperature compression tests were performed to assess seal resiliency and unit preloads as a function of compression. The thermal barrier seal was tested in a subscale "char" motor test in which the seal sealed an intentional defect in the gap insulation. Temperature measurements indicated that the seal blocked 2500 F combustion gases on the upstream side with very little temperature rise on the downstream side.

Steinetz, Bruce M.↗

DOE OSTI2020

Radiation Effects in Graphite

Graphite has been a core structural material and neutron moderator since the first man-made chain reaction experiment in Chicago. This article will discuss the requirements of what makes graphite a good solid moderator. The manufacture and properties of some currently available near-isotropic and isotropic grades are described. The major features of a graphite moderated reactors are briefly outlined. Displacement damage and the induced structural and dimensional changes in graphite are described. Recent characterization work on nano-carbons and oriented pyrolytic graphites that have shed new light on graphite defect structures are reviewed, and the effect of irradiation temperature on the defect structures is highlighted. Changes in the physical properties of nuclear graphite caused by neutron irradiation are reported. Finally, the importance of irradiation induced creep is presented, along with current models and their deficiencies.

Campbell, Anne↗

DOE OSTI2024

Defect Engineering of Bi 2 SeO 2 Thermoelectrics

Abstract Bi 2 SeO 2 is a promising n ‐type semiconductor to pair with p ‐type BiCuSeO in a thermoelectric (TE) device. The TE figure of merit zT and, therefore, the device efficiency must be optimized by tuning the carrier concentration. However, electron concentrations in self‐doped n ‐type Bi 2 SeO 2 span several orders of magnitude, even in samples with the same nominal compositions. Such unsystematic variations in the electron concentration have a thermodynamic origin related to the variations in native defect concentrations. In this study, first‐principles calculations are used to show that the selenium vacancy, which is the source of n ‐type conductivity in Bi 2 SeO 2 , varies by 1–2 orders of magnitude depending on the thermodynamic conditions. It is predicted that the electron concentration can be enhanced by synthesizing under more Se‐poor conditions and/or at higher solid‐state reaction temperatures ( T SSR ), which promote the formation of selenium vacancies without introducing extrinsic dopants. The computational predictions are validated through solid‐state synthesis of Bi 2 SeO 2 . More than two orders of magnitude increase are observed in the electron concentration simply by adjusting the synthesis conditions. Additionally, a significant effect of grain boundary scattering on the electron mobility in Bi 2 SeO 2 is revealed, which can also be controlled by adjusting T SSR . By simultaneously optimizing the electron concentration and mobility, a zT of ≈0.2 is achieved at 773 K for self‐doped n ‐type Bi 2 SeO 2 . The study highlights the need for careful control of thermodynamic growth conditions and demonstrates TE performance improvement by varying synthesis parameters according to thermodynamic guidelines.

Novitskii, Andrei [MANA, National Institute for Ma↗

DOE OSTI2026

Mesoscale atomic engineering in a crystal lattice

Controlling individual atoms using lasers, ion traps and scanning probe tips has transformed our understanding of matter and enabled breakthroughs in quantum science. Extending this control into three-dimensional (3D) solids and across mesoscopic scales, however, remains a foundational challenge. Electron irradiation in electron microscopes is known to induce atomic displacements, and atomic manipulation has been proposed and demonstrated. Yet repeated and deterministic control has remained elusive. Here, in this study, we demonstrate deterministic atomic engineering in a 3D crystal, creating ordered arrangements of more than 40,000 user-defined defects within minutes across a 150 nm × 100 nm × 13 nm volume. By steering individual Cr atoms in the magnetic semiconductor CrSBr into selected interstitial sites using an electron beam directed with sub-20-pm-scale accuracy, we create vacancy–interstitial complexes. The resulting impurity array forms a mesoscale crystal embedded within the host lattice, a new form of engineered artificial matter that remains stable at room temperature and outside the microscope. By tracking Cr atom displacements, we identify conditions under which the defect structures are predictable. Our calculations suggest that these defects form correlated impurity states with intra-defect optical transitions and inter-defect kinetic and Coulomb interactions. This establishes a generalizable platform for atomic defect engineering at mesoscopic, and potentially macroscopic, scales, opening opportunities for scalable quantum technologies, including deterministic colour-centre placement, quantum simulation of many-body lattice models and atomic-scale manufacturing.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2023

Dynamic oxidation of (Mn,Co) 3 O 4 -Coated interconnects for solid oxide electrolysis cells

Solid oxide electrolysis cell stacks are expected to experience dynamic conditions when using renewable electricity derived from wind or solar power. To address this scenario, (Mn,Co) 3 O 4 (MCO)-coated Crofer 22 APU interconnect coupons are subjected to thermal cycling, and intermittent current density, with gas compositions relevant to high-temperature electrolysis (elevated steam:hydrogen ratio and oxygen content). Defects are also intentionally introduced in the MCO coating, to assess whether the difference in oxidation properties of the adjacent coated and uncoated (defective) surfaces causes sufficient stress to damage the protective oxide scale. Specimens with defects are subjected to oxidation for 1000 h at 800 °C, or thermal cycling. Before thermal cycling, some specimens are pre-oxidized to create a thick oxide scale to mimic the scale thickness expected after ~30 kh operation. In all cases, the coating and oxide scale remain well adhered with no cracking observed. Area-specific resistance (ASR) is monitored in both single-atmosphere and dual-atmosphere conditions, and the ASR is stable and is not impacted by dynamic cycling of the current density. Finally, this work provides confidence that the MCO coated interconnect will function as needed in dynamic operation conditions, even with coating defects.

08 HYDROGEN↗

DOE OSTI2020

Strong spin–orbit quenching via the product Jahn–Teller effect in neutral group IV qubits in diamond

Abstract Artificial atom qubits in diamond have emerged as leading candidates for a range of solid-state quantum systems, from quantum sensors to repeater nodes in memory-enhanced quantum communication. Inversion-symmetric group IV vacancy centers, comprised of Si, Ge, Sn, and Pb dopants, hold particular promise as their neutrally charged electronic configuration results in a ground-state spin triplet, enabling long spin coherence above cryogenic temperatures. However, despite the tremendous interest in these defects, a theoretical understanding of the electronic and spin structure of these centers remains elusive. In this context, we predict the ground-state and excited-state properties of the neutral group IV color centers from first principles. We capture the product Jahn–Teller effect found in the excited state manifold to second order in electron–phonon coupling, and present a nonperturbative treatment of the effect of spin–orbit coupling. Importantly, we find that spin–orbit splitting is strongly quenched due to the dominant Jahn–Teller effect, with the lowest optically-active 3 E u state weakly split into m s -resolved states. The predicted complex vibronic spectra of the neutral group IV color centers are essential for their experimental identification and have key implications for use of these systems in quantum information science.

Materials Science↗

DOE OSTI2023

Beyond MicroED: Ab Initio Structure Elucidation using 4D-STEM

Microcrystal electron diffraction (microED) has recently morphed into an increasingly mainstream technique in structural chemistry [1]. Its ability to interrogate nanocrystals orders of magnitude too small for conventional X-ray diffraction has enabled solid-state structure elucidation of several species previously considered impossible to solve using X-ray crystallography [2, 3]. Furthermore, selected area aperture-enabled microED remains thwarted by the presence of disordered, overlapping, or otherwise poorly diffracting domains, all of which routinely conspire to diminish data quality. Just as insufficient crystal size historically stymied conventional X-ray methods, these nanoscale defects frequently prohibit structure solution using classical microED.

Saha, Ambarneil↗

DOE OSTI2020

In situ microstructural evolution in face-centered and body-centered cubic complex concentrated solid-solution alloys under heavy ion irradiation

This study characterizes the microstructural evolution of single-phase complex concentrated solid-solution alloy (CSA) compositions under heavy ion irradiation with the goal of evaluating mechanisms for CSA radiation tolerance in advanced fission systems. Three such alloys, Cr 18 Fe 27 Mn 27 Ni 28 , Cr 15 Fe 35 Mn 15 Ni 35 , and equimolar NbTaTiV, along with reference materials (pure Ni and E90 for the Cr-FeMnNi family and pure V for NbTaTiV) were irradiated at 50 K and 773 K with 1 MeV Kr ++ ions to various levels of displacements per atom (dpa) using in-situ transmission electron microscopy. Cryogenic irradiation resulted in small defect clusters and faulted dislocation loops as large as 12 nm in face-centered cubic (FCC) CSAs. With thermal diffusion suppressed at cryogenic temperatures, defect densities were lower in all CSAs than in their less compositionally complex reference materials indicating that point defect production is reduced during the displacement cascade stage. High temperature irradiation of the two FCC CSA resulted in the formation of interstitial dislocation loops which by 2 dpa grew to an average size of 27 nm in Cr 18 Fe 27 Mn 27 Ni 28 and 10 nm in Cr 15 Fe 35 Mn 15 Ni 35 . This difference in loop growth kinetics was attributed to the difference in Mn-content due to its effect on the nucleation rate by increasing vacancy mobility or reducing the stacking-fault energy.

36 MATERIALS SCIENCE↗