Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Sources”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Digital input is buffered to real-time analog display

Buffering technique utilizes nine-bit binary counter and holding register of eight flip-flops. These flip-flops form the memory device that allows precise asynchronous conversion of the digital source data. Counter generates a waveform which is passed through a low pass filter to recover data in analog form.

Bower, K. F.↗

A frequency division multiplex technique for transmitting commands

Reliable random access multiplexer is controlled and operated over two twisted-pair telephone lines at distances of 5.6 to 8.0 km with control signals of less than 10 volts rms. Technique adapts to any process or environmental control system where data source is necessary.

Brey, H.↗

Manpower management information system /MIS/

System of programs capable of building and maintaining data bank provides all levels of management with regular manpower evaluation reports and data source for special management exercises on manpower.

Gravette, M. C.↗

Vegetation changes caused by fire in the Florida flatwoods as observed by remote sensing

The nature of the flatwoods and the role that ground fires have played in maintaining them are discussed. Emphasis is placed on the areal and temporal extent of burns as recorded uniformly by remote sensors. Thermal infrared, color infrared, and Ektachrome imagery were obtained from sensors flown by a NASA aircraft at 15,000 feet over a test site in Osceola County, Florida, in March 1968. The overall pattern of burning can be sequenced and mapped uniformly from the imagery. By comparing the various imagery, areal and temporal extent of burned areas can be determined. It was concluded that remote sensed imagery provides more accurate and areally comprehensive media for assessing the impact of ground fires on the landscape of the flatwoods region than are available from any other data source.

Mealor, W. T., Jr.↗

An examination of applications of remote sensing data to Metropolitan Washington Council of Governments' planning requirements

A comprehensive inventory of a series of remote sensing applications for a variety of regional planning programs in metropolitan Washington was undertaken. Examples of application, methods for data utilization, and corresponding photographic illustrations are provided illustrating how remote sensing would prove particularly useful as a unique and/or supplemental data source.

Mallon, H. J.↗

Aircraft handling qualities data

Available information on weight and inertia, aerodynamic derivatives, control characteristics, and stability augmentation systems is documented for 10 representative contemporary airplanes. Data sources are given for each airplane. Flight envelopes are presented and dimensional derivatives, transfer functions for control inputs, and several selected handling qualities parameters have been computed and are tabulated for 10 different flight conditions including the power approach configuration. The airplanes documented are the NT-33A, F-104A, F-4C, X-15, HL-10, Jetstar, CV-880M, B-747, C-5A, and XB-70A.

Heffley, R. K.↗

The pseudonoise test set: Communication system's performance evaluation based upon RMS error testing

A pseudonoise (PN) test set was built to provide a relatively easy means of accurately determining the end-to-end rms error introduced by a communication system when subjected to wideband data. It utilizes a filtered pseudorandom sequence generator as a wideband data source, providing a convenient means for digitally delaying the input reference signal for comparison with the distorted test communication system output. In addition to providing a means to measure the end-to-end rms error and the average delay of a communication system, the PN test set also provides a means to determine the tested system's impulse response and correlation function. The theory of PN testing is discussed in detail along with the most difficult aspects of implementation, the building of matched filter pairs. Both analytical and empirical results are reported which support the contentions that this is an accurate and practical way to acquire figures of merit for complete communication systems.

Wallace, G. R.↗

Research for applications of remote sensing to state and local governments (ARSIG)

Remote sensing and its application to problems confronted by local and state planners are reported. The added dimension of remote sensing as a data gathering tool has been explored identifying pertinent land use factors associated with urban growth such as soil associations, soil capability, vegetation distribution, and flood prone areas. Remote sensing within rural agricultural setting has also been utilized to determine irrigation runoff volumes, cropping patterns, and land use. A variety of data sources including U-2 70 mm multispectral black and white photography, RB-57 9-inch color IR, HyAC panoramic color IR and ERTS-1 imagery have been used over selected areas of Arizona including Tucson, Arizona (NASA Test Site #30) and the Sulphur Springs Valley.

Foster, K. E.↗

Unique characteristics of ERTS

The manned spaceflights have demonstrated what film cameras can do in space and they could provide a data source from which maps would be one of the principal products. ERTS was not defined with mapping as one of its principal objectives, but with ERTS-1 in orbit certain unique characteristics or advantages of the electronic transmission (TV) earth sensing system become apparent to the mapmaker. Six of the more obvious advantages over aircraft and satellite film systems are: (1) long life and coverage; (2) near real time; (3) orthogonality; (4) radiometric fidelity; (5) extension into the near IR wavelengths; and (6) extension into the thermal wavelengths.

Colvocoresses, A. P.↗

Application of ERTS-1 Data to Aid in Solving Water Resources Management Problems in the State of California

Investigations within the State of California have emphasized the direct utilization of the supplemental data source afforded by the Earth Resources Technology Satellite-1 (ERTS-1) imagery. A user-oriented study has been underway for several years to identify and develop application methodology for remotely sensed information available from several platform levels, including low and high flights by NASA's U2 aircraft, and other manned and unmanned devices. The University of California has pursued both basic and applied research in remote sensing, through ongoing studies supported by NASA, and in cooperation with state agencies responsible for water resources and related fields. This report reviews the applications of ERTS-1 and supplementary imagery sources applicable to water resources planning, operations, and management.

Burgy, R. H.↗

Static stability and control effectiveness of models 12-0 and 34-0 of the vehicle 3 configuration, volume 3

Static stability and control effectiveness characteristics of two 0.004 scale models of the vehicle 3 configuration are reported. The components investigated consisted of a single aft body, vertical/rudder, OMS pods with two interchangeable wings, four interchangeable forward bodies, four trimmers, and a spoiler. The test was conducted in 14 x 14 inch trisonic wind tunnel over a Mach number range from 0.6 to 4.96. Angles of attack from 0 to 60 degrees and angles of sideslip from -10 to 10 degrees at 0, 10, 20,30, and 40 degrees angle of attack were tested. Elevon, body flap, and speed brake deflection composed the parametric considerations. No grit was placed on the models during the test. The tabulated source data and incremental data figures are presented.

Allen, E. C.↗

Space shuttle seal material and design development for earth storable propellant systems

The results of a program to investigate and characterize seal materials suitable for space shuttle storable propellant systems are given. Two new elastomeric materials were identified as being potentially superior to existing state-of-the art materials for specific sealing applications. These materials were AF-E-124D and AF-E-411. AF-E-124D is a cured perfluorinated polymer suitable for use with dinitrogen tetroxide oxidizer, and hydrazine base fuels. AF-E-411 is an ethylene propylene terpolymer material for hydrazine base fuel service. Data are presented relative to low and high temperature characteristics as well as propellant exposure effects. Types of data included are: mechanical properties, stress strain curves, friction and wear characteristics, compression set and permeability. Sealing tests with a flat poppet-seal valve were conducted for verification of sealing capability. A bibliography includes over 200 references relating to seal design or materials and presents a concise tabulation of the more useful seal design data sources.

Source record↗

The X-ray emissivity of the universe: 2 to 200 keV

Observational results on the diffuse X-ray background between 2 and about 200 keV are presented. Data were analyzed in relation to volume emissivity. The UHURU and OSO-3 satellites and balloon flights served as data sources for the analysis.

Schwartz, D.↗

Relevance of ERTS-1 to the State of Ohio

The author has identified the following significant results. During the first year of project effort the ability of ERTS-1 imagery to be used for mapping and inventorying strip-mined areas in south eastern Ohio, the potential of using ERTS-1 imagery in water quality and coastal zone management in the Lake Erie region, and the extent that ERTS-1 imagery could contribute to localized (metropolitan/urban), multicounty, and overall state land use needs were experimentally demonstrated and reported as significant project results. Significant research accomplishments were achieved in the technological development of manual and computerized methods to extract multi-feature information as well as singular feature information from ERTS-1 data as is exemplified by the forestry transparency overlay. Fabrication of an image transfer device to superimpose ERTS-1 data onto existing maps and other data sources was also a significant analytical accomplishment.

Sweet, D. C.↗

Analysis of data from spacecraft (stratospheric warmings)

Investigations involved a search through existing literature and data to obtain case histories for the six or more stratospheric warmings that occurred in April - May 1969, June - July 1969, August 1969, December 1969 - January 1970, December 1970 - January 1971, and January 1973 - February 1973. For each of these warmings the following steps have been taken in preparation for analysis: (1) defining the nature of the problem; (2) literature search of stratwarmings and solar-terrestrial phenomens; and (3) file of data sources, especially stratospheric temperatures (radiances) and geophysical indices.

Source record↗