Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Load-Packaged AC/DC and DC/DC Power Electronics Converter Performance Data

This data set contains experimentally characterized performance data from load-packaged alternating current to direct current (AC/DC) and direct current to direct current (DC/DC) power electronics converters associated with lighting devices and miscellaneous electrical loads typically found in commercial buildings in the United States. The data set contains input power, output power, efficiency, and harmonic spectrum data for 58 AC/DC converters and 35 DC/DC converters.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Interchangeable Use of GNSS and Seismic Data for Rapid Earthquake Characterization: 2021 Chignik Earthquake, Alaska

Earthquake magnitude estimation using peak ground velocities (PGV) derived from 13 Global Navigation Satellite Systems (GNSS) data has shown promise for rapid 14 characterization of damaging earthquakes. Here we examine the feasibility of using 15 GNSS-derived velocity waveforms as interchangeable data for ground motion estimation 16 and other products that typically rely on strong-motion seismic records. Our study 17 compares PGVs derived from high-rate GNSS to those computed from high-rate seismic 18 records (strong-motion and velocity), at co- and closely-located stations. The recent 2021 Manuscript Click here to access/download;Manuscript;Manuscript_Final.docx 2 19 Mw 8.2 Chignik earthquake in Alaska that was recorded on co-located GNSS and strong20 motion sensors provides the perfect opportunity to compare the two data streams and 21 their application in rapid response. The Chignik velocity records appear almost identical 22 at co-located GNSS and strong-motion stations when observed at frequencies < 0.25 Hz. 23 GNSS and strong-motion derived velocity data are further employed to generate rapid 24 estimates of PGV-derived moment magnitudes for the earthquake. The moment 25 magnitude estimates from GNSS and joint GNSS/seismic data are within ~ ±0.4 26 magnitude units (Fang et al., 2020) of the final magnitude (Mw 8.2). ShakeMaps 27 generated for the 2021 Chignik earthquake using GNSS and seismic PGVs show notable 28 agreement between them, and show negligible shifts in PGV contours when co-/closely 29 located GNSS and seismic stations are substituted for one another. Therefore, we posit 30 that GNSS is a powerful alternative or addition to seismic data and vice versa.

Earthquake rapid response↗

Effects of Data Quality on the Characterization of Aerosol Properties from Multiple Sensors

Cross-comparison of aerosol properties between ground-based and spaceborne measurements is an important validation technique that helps to investigate the uncertainties of aerosol products acquired using spaceborne sensors. However, it has been shown that even minor differences in the cross-characterization procedure may significantly impact the results of such validation. Of particular consideration is the quality assurance I quality control (QA/QC) information - an auxiliary data indicating a "confidence" level (e.g., Bad, Fair, Good, Excellent, etc.) conferred by the retrieval algorithms on the produced data. Depending on the treatment of available QA/QC information, a cross-characterization procedure has the potential of filtering out invalid data points, such as uncertain or erroneous retrievals, which tend to reduce the credibility of such comparisons. However, under certain circumstances, even high QA/QC values may not fully guarantee the quality of the data. For example, retrievals in proximity of a cloud might be particularly perplexing for an aerosol retrieval algorithm, resulting in an invalid data that, nonetheless, could be assigned a high QA/QC confidence. In this presentation, we will study the effects of several QA/QC parameters on cross-characterization of aerosol properties between the data acquired by multiple spaceborne sensors. We will utilize the Multi-sensor Aerosol Products Sampling System (MAPSS) that provides a consistent platform for multi-sensor comparison, including collocation with measurements acquired by the ground-based Aerosol Robotic Network (AERONET), The multi-sensor spaceborne data analyzed include those acquired by the Terra-MODIS, Aqua-MODIS, Terra-MISR, Aura-OMI, Parasol-POLDER, and CalipsoCALIOP satellite instruments.

Petrenko, Maksym↗

A comparison of SMMR and AVHRR data for continental land cover characterization

Images using reflected visible and NIR data and images using passive microwave data were compared in terms of their usefulness for characterizing land-cover types in South America and Africa. The former images are of the normalized difference vegetation index (NDVI), and the latter images are of the microwave polarization difference temperature (MPDT). The combined use of MPDT and NDVI data sets show clear synergistic benefits in using the two data sets. However, the evidence suggests that for most cover types, increasing the temporal frequency of the NDVI images is more advantageous than incorporating MPDT data sets.

Townshend, J. R. G.↗

Directly imaging steeply-dipping fault zones in geothermal fields with multicomponent seismic data

For characterizing geothermal systems, it is important to have clear images of steeply-dipping fault zones because they may confine the boundaries of geothermal reservoirs and influence hydrothermal flow. Elastic reverse-time migration (ERTM) is the most promising tool for subsurface imaging with multicomponent seismic data. However, conventional ERTM usually generates significant artifacts caused by the cross correlation of undesired wavefields and the polarity reversal of shear waves. In addition, it is difficult for conventional ERTM to directly image steeply-dipping fault zones. We develop a new ERTM imaging method in this paper to reduce these artifacts and directly image steeply-dipping fault zones. In our new ERTM method, forward-propagated source wavefields and backward-propagated receiver wavefields are decomposed into compressional (P) and shear (S) components. Furthermore, each component of these wavefields is separated into left- and right-going, or downgoing and upgoing waves. The cross correlation imaging condition is applied to the separated wavefields along opposite propagation directions. For converted waves (P-to-S or S-to-P), the polarity correction is applied to the separated wavefields based on the analysis of Poynting vectors. Numerical imaging examples of synthetic seismic data demonstrate that our new ERTM method produces high-resolution images of steeply-dipping fault zones.

58 GEOSCIENCES↗

Characterization of Venera 15/16 Geologic Units from Pioneer Venus Reflectivity and Roughness Data

Geologic units have been defined for the surface of Venus from Venera 15/16 image data. A characterization of these geologic units is carried out using information on surface properties derived from Pioneer Venus (PV) reflectivity and rms slope data. The geologic context provided by Venera 15/16 units allows additional, more specific interpretations of surface radar properties to be made. Characterization of Venera units results in the definition of four groups of Venera units: (1) smooth rocky units, 2) rough rocky units, (3) rough high dielectric units, and (4) diffusely scattering units. On the basis of correlations of surface morphology to spatial and statistical distributions in rms slope and reflectivity data, we test models for the origin of the surface properties of some units. We conclude that plains and tectonic units can be contrasted in terms of the average roughness of the surface and that tectonic deformation appears to roughen the surface at 0.5- to 10-m and 5- to 50-cm scales. This tectonic weathering process appears to dominate the erosional regime of Venus. Unlike Earth or Mars, production and transport of soils dominates only a small portion (less than or equal to 5%) of the surface. Some of the Venera units display distinctive spatial and statistical distributions of PV radar data. In particular, apparent low reflectivity in the tesserae appears to be caused by small (5-50 cm) rock fragments on the surface which cause diffuse scattering at Pioneer Venus wavelengths. Analysis of models for the formation of these fragments suggests that they are due to the pervasive deformation undergone by the tesserae. Finally, aspects of this study have been used to extend results of Venera image data analysis southward of 30 deg. N lat, resulting in it prediction of the distribution of tessera. Such results can aid in Magellan investigations.

Bindschadler, D. L.↗

Ocean Optics Protocols for Satellite Ocean Color Sensor Validation: Inherent Optical Properties: Instruments, Characterizations, Field Measurements and Data Analysis Protocols - Volume 4

This document stipulates protocols for measuring bio-optical and radiometric data for the Sensor Intercomparison and Merger for Biological and Interdisciplinary Oceanic Studies (SIMBIOS) Project activities and algorithm development. The document is organized into 6 separate volumes as Ocean Optics Protocols for Satellite Ocean Color Sensor Validation, Revision 4. Volume I: Introduction, Background and Conventions; Volume II: Instrument Specifications, Characterization and Calibration; Volume III: Radiometric Measurements and Data Analysis Methods; Volume IV: Inherent Optical Properties: Instruments, Characterization, Field Measurements and Data Analysis Protocols; Volume V: Biogeochemical and Bio-Optical Measurements and Data Analysis Methods; Volume VI: Special Topics in Ocean Optics Protocols and Appendices. The earlier version of Ocean Optics Protocols for Satellite Ocean Color Sensor Validation, Revision 3 (Mueller and Fargion 2002, Volumes 1 and 2) is entirely superseded by the six volumes of Revision 4 listed above.

Mueller, J. L.↗

Ocean Optics Protocols for Satellite Ocean Color Sensor Validation, Revision 4, Volume IV: Inherent Optical Properties: Instruments, Characterizations, Field Measurements and Data Analysis Protocols

This document stipulates protocols for measuring bio-optical and radiometric data for the Sensor Intercomparision and Merger for Biological and Interdisciplinary Oceanic Studies (SIMBIOS) Project activities and algorithm development. The document is organized into 6 separate volumes as Ocean Optics Protocols for Satellite Ocean Color Sensor Validation, Revision 4. Volume I: Introduction, Background, and Conventions; Volume II: Instrument Specifications, Characterization and Calibration; Volume III: Radiometric Measurements and Data Analysis Methods; Volume IV: Inherent Optical Properties: Instruments, Characterization, Field Measurements and Data Analysis Protocols; Volume V: Biogeochemical and Bio-Optical Measurements and Data Analysis Methods; Volume VI: Special Topics in Ocean Optics Protocols and Appendices. The earlier version of Ocean Optics Protocols for Satellite Ocean Color Sensor Validation, Revision 3 is entirely superseded by the six volumes of Revision 4 listed above.

Mueller, J. L.↗

A Deterministic Multivariate Clustering Method for Drive Cycle Generation from In-Use Vehicle Data

Accurately characterizing vehicle drive cycles plays a fundamental role in assessing the performance of new vehicle technologies. Repeatable, short duration representative drive cycles facilitate more informed decision making, resulting in improved test procedures and more successful vehicle designs. With continued growth in the deployment of onboard telematics systems employing global positioning systems (GPS), large scale, low cost collection of real-world vehicle drive cycle data has become a reality. As a result of these technological advances, researchers, designers, and engineers are no longer constrained by lack of operating data when developing and optimizing technology, but rather by resources available for testing and simulation. Experimental testing is expensive and time consuming, therefore the need exists for a fast and accurate means of generating representative cycles from large volumes of real-world driving data. This paper explores the development and initial validation of a method of generating representative drive cycles from large collections of real-world vehicle data using a deterministic multivariate clustering approach. Starting with theory and diving into the methodology behind representative cycle generation, the paper aims to also present graphical and tabular results of initial validation via vehicle simulation and chassis dynamometer testing. Additional topics for further research and areas for ongoing development will also be presented.

47 OTHER INSTRUMENTATION↗

Enhancement of Tropical Land Cover Mapping with Wavelet-Based Fusion and Unsupervised Clustering of SAR and Landsat Image Data

The characterization and the mapping of land cover/land use of forest areas, such as the Central African rainforest, is a very complex task. This complexity is mainly due to the extent of such areas and, as a consequence, to the lack of full and continuous cloud-free coverage of those large regions by one single remote sensing instrument, In order to provide improved vegetation maps of Central Africa and to develop forest monitoring techniques for applications at the local and regional scales, we propose to utilize multi-sensor remote sensing observations coupled with in-situ data. Fusion and clustering of multi-sensor data are the first steps towards the development of such a forest monitoring system. In this paper, we will describe some preliminary experiments involving the fusion of SAR and Landsat image data of the Lope Reserve in Gabon. Similarly to previous fusion studies, our fusion method is wavelet-based. The fusion provides a new image data set which contains more detailed texture features and preserves the large homogeneous regions that are observed by the Thematic Mapper sensor. The fusion step is followed by unsupervised clustering and provides a vegetation map of the area.

LeMoigne, Jacqueline↗

Decay heat uncertainty for BWR used fuel due to modeling and nuclear data uncertainties

Characterization of the energy released from radionuclide decay in nuclear fuel discharged from reactors is essential for the design, safety, and licensing analyses of used nuclear fuel storage, transportation, and repository systems. There are a limited number of decay heat measurements available for commercial used fuel applications. Because decay heat measurements can be expensive or impractical for covering the multitude of existing fuel designs, operating conditions, and specific application purposes, decay heat estimation relies heavily on computer code prediction. Uncertainty evaluation for calculated decay heat is an important aspect when assessing code prediction and a key factor supporting decision making for used fuel applications. While previous studies have largely focused on uncertainties in code predictions due to nuclear data uncertainties, this study discusses uncertainties in calculated decay heat due to uncertainties in assembly modeling parameters as well as in nuclear data. Capabilities in the SCALE nuclear analysis code system were used to quantify the effect on calculated decay heat of uncertainties in nuclear data and selected manufacturing and operation parameters for a typical boiling water reactor (BWR) fuel assembly. Furthermore, the BWR fuel assembly used as the reference case for this study was selected from a set of assemblies for which high-quality decay heat measurements are available, to assess the significance of the results through comparison with calculated and measured decay heat data.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

CONSTRAINING SPINNING DUST PARAMETERS WITH THE WMAP FIVE-YEAR DATA

We characterize spinning dust emission in the warm ionized medium (WIM) by comparing templates of Galactic dust and H{alpha} with the five-year maps from the Wilkinson Microwave Anisotropy Probe (WMAP). The H{alpha}-correlated microwave emission deviates from the thermal bremsstrahlung (free-free) spectrum expected for ionized gas, exhibiting an additional broad bump peaked at {approx}40 GHz which provides {approx}20% of the peak intensity. We confirm that the bump is consistent with a modified Draine and Lazarian spinning dust model, though the peak frequency of the emission is somewhat lower than the 50 GHz previously claimed. This frequency shift results from systematic errors in the large-scale modes of the three-year WMAP data which have been corrected in the five-year data release. We show that the bump is not the result of errors in the H{alpha} template by analyzing regions of high free-free intensity, where the WMAP K-band map may be used as the free-free template. We rule out a pure free-free spectrum for the H{alpha}-correlated emission at high confidence: {approx}27{sigma} for the nearly full-sky fit, even after marginalizing over the cosmic microwave background cross-correlation bias. We also extend the previous analysis by searching the parameter space of the Draine and Lazarian model but letting the amplitude float. The best fit for reasonable values of the characteristic electric dipole moment and density requires an amplitude factor of {approx}0.3. This suggests that small polycyclic aromatic hydrocarbons in the WIM are depleted by a factor of {approx}3.

79 ASTRONOMY AND ASTROPHYSICS↗

Characterizing and Improving the Data Reduction Pipeline for the Keck OSIRIS Integral Field Spectrograph

OSIRIS is a near-infrared (1.0–2.4 μm) integral field spectrograph operating behind the adaptive optics system at Keck Observatory and one of the first lenslet-based integral field spectrographs. Since its commissioning in 2005, it has been a productive instrument, producing nearly half the laser guide star adaptive optics papers on Keck. The complexity of its raw data format necessitated a custom data reduction pipeline (DRP) delivered with the instrument in order to iteratively assign flux in overlapping spectra to the proper spatial and spectral locations in a data cube. Other than bug fixes and updates required for hardware upgrades, the bulk of the DRP has not been updated since initial instrument commissioning. We report on the first major comprehensive characterization of the DRP using on-sky and calibration data. We also detail improvements to the DRP, including characterization of the flux assignment algorithm, exploration of spatial rippling in the reduced data cubes, and improvements to several calibration files, including the rectification matrix, bad-pixel mask, and wavelength solution. We present lessons learned from over a decade of OSIRIS data reduction that are relevant to the next generation of integral field spectrograph hardware and data reduction software design.

79 ASTRONOMY AND ASTROPHYSICS↗

Integrative data-driven approaches for characterization & prediction of aerosol-cloud processes

Focal Area: Advanced methods to glean insights from complex data (Focal Area 3). Science Challenge: Fusing and interpreting the vast amount of data from disjoint sources for the purpose of elevating our understanding of aerosol-cloud interaction presents an enormous challenge and opportunity and is necessary to improve uncertainty quantification and predictions, especially for extreme events.

54 ENVIRONMENTAL SCIENCES↗

Replication Data for: Latent Representation Learning for Structural Characterization of Catalysts

The data underlying this published work have been made publicly available in this repository as part of the IMASC Data Management Plan. This work was supported as part of the Integrated Mesoscale Architectures for Sustainable Catalysis (IMASC), an Energy Frontier Research Center funded by the U.S. Department of Energy, Office of Science, Basic Energy Sciences under Award # DE-SC0012573.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Water quality determinations in the Virgin Islands from ERTS-A data.

The characterization of water quality in terms of absolute color values, using imagery from the ERTS-A satellite, imagery from aircraft, and ground truth measurements is discussed. The establishment of photometric standards resolvable by the ERTS-A sensors, as a means of determining atmospheric effects (which generally vary on sequential overpasses) is examined. The application of these techniques is demonstrated for the harbor of Charlotte Amalie on St. Thomas, Virgin Islands, which is characterized by the presence of many poluting factors.-

Egan, W. G.↗

Combustion performance and heat transfer characterization of LOX/hydrocarbon type propellants. Task 3: Data dump

A preliminary characterization of Orbital Maneuvering System (OMS) and Reaction Control System (RCS) engine point designs over a range of thrust and chamber pressure for several hydrocarbon fuels is reported. OMS and RCS engine point designs were established in two phases comprising baseline and parametric designs. Interface pressures, performance and operating parameters, combustion chamber cooling and turboprop requirements, component weights and envelopes, and propellant conditioning requirements for liquid to vapor phase engine operation are defined.

Hart, S. W.↗