Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cu”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Understanding the evolution of liquid and solid microjets from grooved Sn and Cu samples using radiography

Experiments were performed on grooved Sn and Cu samples to study the temporal evolution of microjets. Jets were generated by the impact of gun-launched flyer plates against the back of grooved targets made from either Cu or Sn (groove depth of ~250 μm). The Hugoniot states in the various Sn targets encompassed conditions where solid phases are maintained throughout (7 and 16 GPa) and also conditions where melting occurs upon the release of compression (25 and 34 GPa); the transition occurs near a Hugoniot pressure of 23 GPa. Cu targets at 27 and 56 GPa provide comparisons in which the jets move at similar speeds but remain solid. In all cases, the spatial distribution of mass within the microjets was measured using high-speed synchrotron radiography. The result is a time history of the jet thickness profile from which quantities like total jet mass and jet velocity can be derived. In both the solid and liquid states, we generally observe that an increase in the shock strength leads to an increase in jet mass. However, this trend breaks down for Hugoniot states near the transition from continuously solid to melted-on-release. This is evidenced by the observation that there was no difference in the rate of mass flow in Sn jets at 16 and 25 GPa, while similar pressure jumps on either side of this range caused substantial changes in the jet mass. This contrasts with the behavior of smaller polishing defects that were present on the same samples (~1 μm deep). From these, no ejecta mass was detected below the melt boundary, but obvious microjets were generated once melting occurred. This indicates that crossing the bulk melt-on-release threshold can alternately promote or inhibit the flow of mass into microjets based on the amplitude of the initial perturbation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Comparing first-principles density functionals plus corrections for the lattice dynamics of YBa 2 Cu 3 O 6

The enigmatic mechanism underlying unconventional high-temperature superconductivity, especially the role of lattice dynamics, has remained a subject of debate. Theoretical insights have long been hindered due to the lack of an accurate first-principles description of the lattice dynamics of cuprates. Recently, using the r2SCAN meta-generalized gradient approximation (meta-GGA) functional, we have been able to achieve accurate phonon spectra of an insulating cuprate YBa 2 Cu 3 O 6 and discover significant magnetoelastic coupling in experimentally interesting Cu–O bond stretching optical modes [Ning et al., Phys. Rev. B 107, 045126 (2023)]. We extend this work by comparing Perdew–Burke–Ernzerhof and r2SCAN performances with corrections from the on-site Hubbard U and the D4 van der Waals (vdW) methods, aiming at further understanding on both the materials science side and the density functional side. We demonstrate the importance of vdW and self-interaction corrections for accurate first-principles YBa 2 Cu 3 O 6 lattice dynamics. Since r2SCAN by itself partially accounts for these effects, the good performance of r2SCAN is now more fully explained. Finally, in addition, the performances of the Tao–Mo series of meta-GGAs, which are constructed in a different way from the strongly constrained and appropriately normed (SCAN) meta-GGA and its revised version r2SCAN, are also compared and discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

CO 2 reduction on pure Cu produces only H 2 after subsurface O is depleted: Theory and experiment

Significance Electrochemical reduction of CO 2 to fuels and valuable chemicals is a global imperative to address energy and climate challenges. Despite enormous efforts, there is not yet a commercial process. The best catalyst remains Cu metal, but a great deal of controversy revolves around the role of the presence of oxygen in the material. We combine theory and experiments to show that pure Cu without subsurface oxygen leads to no organic products. Thus, maintaining substantial oxygen at Cu surfaces is essential for long-term reduction of CO 2 to organics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Shock-induced twinning/detwinning and spall failure in Cu–Ta nanolaminates at atomic scales

Here, this study provides new insights into the role of interfaces on the deformation and failure mechanisms in shock-loaded Cu–Ta–Cu trilayer system. The thickness of the Ta layer, piston velocities, and shock pulse durations were varied to explore the impact of impedance mismatch and loading conditions on spallation behavior and twin formation. It was found that the interfaces play a crucial role in the dynamic response of these multilayered systems since secondary reflection waves generated at the interfaces significantly affected the peak stress and pressure profiles, influencing void nucleation and failure modes. In the trilayer systems, failure predominantly occurred at interfaces and within the Ta layer, with void nucleation sites and twinning behavior being markedly different compared to single-crystal Cu and Ta. Increasing the Ta layer thickness modified the wave interactions, leading to different failure locations. Higher piston velocities were associated with increased spall strength by enhancing wave interactions and void formation, particularly at the interfaces and within the Ta layer, under specific configurations. Additionally, shorter shock pulse durations facilitated earlier initiation of the release fan, reducing twin formation and altering the failure dynamics by accelerating twin annihilation and pressure release.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The intrinsic electrochemical behavior of layered Cu 2 WSe 4 nanoparticles

Nanoplates of Cu 2 WSe 4 (~50 nm) were synthesized via a hot-injection method by one-pot selenation of WCl 6 and Cu(acac) 2 . This synthetic route provided another perspective towards the intrinsic electrochemical properties of Cu 2 MSe 4 (M = Mo or W), where their nanoparticles were previously synthesized via a metathesis route. In conclusion, cations-dependent cathodic events and surface activation anodic events were identified by cyclic voltammetry in acetonitrile.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

Resilience of High-Efficiency CdSeTe:As and CdSeTe:Cu Solar Cells to Proton Irradiation

Power generation in space is currently dominated by expensive III-V multi-junction photovoltaic (PV) devices and cheap crystalline silicon (c-Si) PV devices. Both of these technologies degrade rapidly in proton-radiation-rich space environments, such as the Van Allen belt. The present study of cadmium selenide telluride- (CdSeTe-) based PV devices exposed to 150-to-1500 keV proton irradiation with fluences up to 9 x 1013 cm-2 reveal a more radiation-hard alternative to III-V and c-Si PV technologies. We report on measurement and analysis of current density vs voltage (JV), external quantum efficiency (EQE), external radiative efficiency, and capacitance vs voltage (CV) characteristics. JV characteristics of As-doped CdSeTe devices show 80% remaining power conversion efficiency (PCE) relative to unexposed controls when exposed to 650 keV protons at a fluence of 1012 cm-2. Under these same irradiation conditions, Cu-doped CdSeTe devices demonstrate an even better 95% PCE retention compared with unirradiated control devices. Evidence of radiation-induced absorber p-type doping compensation is observed in the glass-side EQE at 0 V and CV characteristics of most of the irradiated CdSeTe:As devices, but clear compensation is evident only for the most heavily irradiated CdSeTe:Cu devices. Elevated blue-green photocurrent in the film-side 0 V EQE suggests a buried junction in the most heavily irradiated CdSeTe:As devices. Although CdSeTe:Cu devices are the more resilient of the CdSeTe structures, both CdSeTe-based technologies are radiation-hard when compared to c-Si and III-V multi-junction PV.

14 SOLAR ENERGY↗
DOE OSTI2026

Local Structural Coherence and Interfacial Charge Transfer in Cu 2 ⁢S/Mo⁢S 2 Heterostructure

Precise control over electronic coupling at nanoscale interfaces is critical for designing materials with tunable charge-transfer behavior and catalytic function. Heterostructures with locally coherent interfaces provide a platform for interrogating interfacial charge redistribution in coupled material systems. Here, we report Cu 2 ⁢S/Mo⁢S 2 heterostructures exhibiting nanoscale crystallographic alignment, which are synthesized through a rapid thermal transformation pathway. We employed electrochemical reduction reactions to probe interfacial charge transfer, revealing shifts in product distribution attributable to modified interfacial energetics, even in the absence of optimized catalytic performance. The observed formate Faradaic efficiency suggests that interfacial electronic modulation in the heterostructure shifts product selectivity towards formate, highlighting how interface-driven electronic modulation can direct reaction pathways and influence product selectivity. Optimizing catalyst loading, architecture, and reactor configuration will be critical for future improvement. Structural and compositional integrity were confirmed through powder x-ray diffraction, x-ray photoelectron spectroscopy, and high-resolution transmission electron microscopy. Electron transfer between Cu 2 ⁢S and Mo⁢S 2 domains was further evaluated by electrochemical impedance spectroscopy, while selected-area electron diffraction revealed local crystallographic alignment consistent with a local epitaxial relationship at the Cu 2 S/Mo⁢S 2 heterointerface. To illustrate the broader applicability of this approach, a Zn⁢S/Mo⁢S 2 heterostructure was also synthesized using the same microwave strategy, confirming the generalizability of interfacial engineering principles across metal sulfide-Mo⁢S 2 systems. Collectively, these findings demonstrate that controlled local epitaxial alignment serves as an effective design principle for tuning interfacial energetics and catalytic reactivity in complex heterostructure materials.

carbon capture & utilization↗
DOE OSTI2020

Weakly coupled alternating S = 1 2 chains in the distorted honeycomb lattice compound Na 2 Cu 2 TeO 6

Spin- 1 2 chains with alternating antiferromagnetic (AF) and ferromagnetic (FM) couplings exhibit quantum entanglement as the integer-spin Haldane chains and might be similarly utilized for quantum computations. Such alternating AF-FM chains have been proposed to be realized in the distorted honeycomb lattice compound Na 2 Cu 2 TeO 6 , but to confirm this picture a comprehensive understanding of the exchange interactions including terms outside of the idealized model is required. Here, we employ neutron scattering to study the spin dynamics in Na 2 Cu 2 TeO 6 and accurately determine the coupling strengths through the random phase approximation and density functional theory approaches. We find the AF and FM intrachain couplings are the dominant terms in the spin Hamiltonian, while the interchain couplings are AF but perturbative. This hierarchy in the coupling strengths and the alternating signs of the intrachain couplings can be understood through their different exchange paths. Our results establish Na 2 Cu 2 TeO 6 as a weakly coupled alternating AF-FM chain compound and reveal the robustness of the gapped ground state in alternating chains under weak interchain couplings.

1-dimensional spin chains↗
DOE OSTI2021

Effect of surface steps on chemical ordering in the subsurface of Cu(Au) solid solutions

Atomic steps are typically assumed to only influence surface phenomena of solids. In contrast, in this paper we show, using in-situ atomic-resolution electron microscopy observations and atomistic modeling, the pronounced effect from surface stepsin inducing compositional and structural evolution in the subsurface of a Cu(Au) solid solution. We find that Au surface segregation results in a stacked sequence of Cu-Au ordered phases in the subsurface. The presence of a monatomic step at the surface induces the formation of an anti-phase boundary that extends from the surface step to deeper layers by maintaining the same composition profile associated with each terrace. The bunching of surface steps induces chemical disordering of the Cu-Au ordered phases in the subsurface region of the bunched steps. These results demonstrate the instant propagation of surface dynamics of atomic steps into the subsurface region and can find broader applicability in utilizing surface defects to tune the composition and structure in the subsurface of alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Complex pressure-temperature structural phase diagram of the honeycomb iridate Cu 2 IrO 3

Cu 2 IrO 3 is among the newest layered honeycomb iridates and a promising candidate to harbor a Kitaev quantum spin liquid state. Here, we investigate the pressure and temperature dependence of its structure through a combination of powder x-ray diffraction and x-ray absorption fine structure measurements, as well as ab initio evolutionary structure search. At ambient pressure, we revise the previously proposed C2/c solution with a related but notably more stable P2 1 /c structure. Pressures below 8 GPa drive the formation of Ir-Ir dimers at both ambient and low temperatures, similar to the case of Li 2 IrO 3 . At higher pressures, the structural evolution dramatically depends on temperature. Furthermore, a large discontinuous reduction of the Ir honeycomb interplanar distance is observed around 15 GPa at room temperature, likely driven by a collapse of the O-Cu-O dumbbell bonds. At 15 K, pressures beyond 20 GPa first lead to an intermediate phase featuring a continuous reduction of the interplanar distance, which then collapses at 30 GPa across yet another phase transition. However, the resulting structure around 40 GPa is not the same at room and low temperatures. Remarkably, the reduction in interplanar distance leads to an apparent healing of the stacking faults at room temperature, but not at 15 K. Possible implications on the evolution of electronic structure of Cu 2 IrO 3 with pressure are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Charge localization in strongly correlated {kappa}-(BEDT-TTF){sub 2}Cu[N(CN){sub 2}]I due to inherent disorder.

To understand the physical properties of the series of organic conductors kappa-(BEDT-TTF)(2)Cu[N(CN)(2)]X with X = Cl, Br, and I, not only electronic correlations, but also the effect of disorder has to be taken into account. While for Cl- and Br-containing salts the influence of both parameters were investigated and a universal phase diagram was proposed, the position of kappa-(BEDT-TTF)(2)Cu[N(CN)(2)]I is still not settled. Here we conducted transport, infrared, and dielectric measurements on single crystals of the title compound to clarify its electronic state at low temperatures. The correlation strength was determined as U/W approximate to 2.2; thus this salt is placed deeper in an insulating state compared to the two sister compounds. We found that inherent disorder leads to a Coulomb localized insulating state similar to the moderately x-ray-irradiated kappa-(BEDT-TTF)(2)Cu[N(CN)(2)]Cl.

Iakutkina, O.↗
DOE OSTI2022

Electronic structure, magnetic properties, and pairing tendencies of the copper-based honeycomb lattice Na 2 Cu 2 TeO 6

Spin-1/2 chains with alternating antiferromagnetic (AFM) and ferromagnetic (FM) couplings have attracted considerable interest due to the topological character of their spin excitations. Here, using density functional theory and density-matrix renormalization-group (DMRG) methods, we have systematically studied the dimerized chain system Na 2 Cu 2 TeO 6 with a d 9 electronic configuration. Near the Fermi level, in the nonmagnetic phase the dominant states are mainly contributed by the Cu 3d x 2 -y 2 orbitals highly hybridized with the O 2p orbitals, leading to an “effective” single-orbital low-energy model. By calculating the relevant hoping amplitudes, we explain the size and sign of the exchange interactions in Na 2 Cu 2 TeO 6 . In addition, a single-orbital Hubbard model is constructed for this dimerized chain system where the quantum fluctuations are taken into account. Both AFM and FM couplings (leading to an ↑|-|↓-|↓-↑| state) along the chain were found in our DMRG and Lanczos calculations, in agreement with density functional theory and neutron-scattering results. The hole pairing binding energy ΔE is predicted to be negative at Hubbard U~ 11eV, suggesting incipient pairing tendencies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Precise ${dd}$ excitations and commensurate intersite Coulomb interactions in the dissimilar cuprates YBa 2 Cu 3 O 7–y and La 2–x Sr x CuO 4

Using high-resolution extreme ultraviolet resonant inelastic X-ray scattering (EUVRIXS) spectroscopy at Cu M-edge, we observed the doping dependent spectral shifts of inter-orbital (${dd}$) excitations of YBa 2 Cu 3 O 7-y and La 2-x Sr x CuO 4 . With increasing hole doping level from undoped to optimally doped superconducting compositions, the leading edge of ${dd}$ excitations is found to shift towards lower energy loss in a roughly linear trend that is irrespective to the cuprate species. The magnitude of energy shift can be explained by including a 0.15 eV Coulomb attraction between Cu 3d(x 2 -y 2 ) electrons and the doped holes on the surrounding oxygens in the atomic multiplet calculations. Finally, the consistent energy shift between distinct cuprate families suggests that this inter-site Coulomb interaction energy scale is relatively material-independent, and provides an important reference point for understanding charge density wave phenomena in the cuprate phase diagram.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Magnetic properties of the frustrated spin-$\frac{1}{2}$ capped-kagome antiferromagnet (CsBr)Cu 5 V 2 O 10

Here, the structural and magnetic properties of a spin-$\frac{1}{2}$ averievite (CsBr)⁢Cu 5⁢ V 2 ⁢O 10 are investigated by means of temperature-dependent x-ray diffraction, magnetization, heat capacity, and 51 V nuclear magnetic resonance (NMR) measurements. The crystal structure (trigonal, $P\bar{3}$) features a frustrated capped-kagome lattice of the magnetic Cu 2+ ions. Magnetic susceptibility analysis indicates a large Curie-Weiss temperature of $\theta$ CW ≃ -175K. Heat capacity signals the onset of a magnetic long-range-order (LRO) at T N ≃21.5K at zero magnetic field due to the presence of significant inter-planer coupling in this system. The magnetic LRO below 27 K is further evident from the drastic change in the 51 V NMR signal intensity and rapid enhancement in the 51 V spin-lattice relaxation rate in a magnetic field of 6.3 T. The frustration index ƒ=|⁢$\theta$ CW ⁢|/⁢T N ≃ 8 ascertains strong magnetic frustration in this compound. From the high-temperature value of the 51 V NMR spin-lattice relaxation rate, the leading antiferromagnetic exchange interaction between the Cu 2+ ions is calculated to be J/k B ≃ 136K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Identified charged-hadron production in 𝑝+Al, 3 He + Au, and Cu + Au collisions at $\sqrt{s_{NN}}$ = 200 GeV and in U + U collisions at $\sqrt{s_{NN}}$ = 193 GeV

The PHENIX experiment has performed a systematic study of identified charged-hadron (𝜋 ± , 𝐾 ± , 𝑝, $\bar{𝑝}$) production at midrapidity in 𝑝 + Al, 3 He + Au, and Cu + Au collisions at $\sqrt{s_{NN}}$ = 200 GeV and U + U collisions at $\sqrt{s_{NN}}$ = 193 GeV. Identified charged-hadron invariant transverse-momentum (𝑝 𝑇 ) and transverse-mass (𝑚 𝑇 ) spectra are presented and interpreted in terms of radially expanding thermalized systems. The particle ratios of 𝐾/𝜋 and 𝑝/𝜋 have been measured in different centrality ranges of large (Cu + Au and U + U) and small (𝑝 + Al and 3 He + Au) collision systems. The values of 𝐾/𝜋 ratios measured in all considered collision systems were found to be consistent with those measured in 𝑝+𝑝 collisions. However, the values of 𝑝/𝜋 ratios measured in large collision systems reach the values of ≈0.6, which is a factor of ≈2 larger than in 𝑝 + 𝑝 collisions. These results can be qualitatively understood in terms of the baryon enhancement expected from hadronization by recombination. Identified charged-hadron nuclear-modification factors (𝑅 𝐴⁢𝐵 ) are also presented. Enhancement of proton 𝑅 𝐴⁢𝐵 values over meson 𝑅 𝐴⁢𝐵 values was observed in central 3 He + Au, Cu + Au, and U + U collisions. Finally, the proton 𝑅 𝐴⁢𝐵 values measured in the 𝑝 + Al collision system were found to be consistent with 𝑅 𝐴⁢𝐵 values of 𝜙, 𝜋 ± , 𝐾 ± , and 𝜋 0 mesons, which may indicate that the size of the system produced in 𝑝 + Al collisions is too small for recombination to cause a noticeable increase in proton production.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Microscopic Mechanisms of Glasslike Lattice Thermal Transport in Cubic Cu 12 Sb 4 S 13 Tetrahedrites

Materials based on cubic tetrahedrites (Cu 12 Sb 4 S 13 ) are useful thermoelectrics with unusual thermal and electrical transport properties, such as very low and nearly temperature-independent lattice thermal conductivity (κ L ). We explain the microscopic origin of the glasslike κ L in Cu 12 Sb 4 S 13 by explicitly treating anharmonicity up to quartic terms for both phonon energies and phonon scattering rates. We show that the strongly unstable phonon modes associated with trigonally coordinated Cu atoms are anharmonically stabilized above approximately 100 K and continue hardening with increasing temperature in accord with experimental data. This temperature-induced hardening effect reduces scattering of heat carrying acoustic modes by reducing the available phase space for three-phonon processes, thereby balancing the conventional ∝ T increase in scattering due to phonon population and yielding nearly temperature independent κ L . Furthermore, we find that very strong phonon broadening leads to a qualitative breakdown of the conventional phonon-gas model and modify the dominant heat transport mechanism from the particlelike phonon wave packet propagation to incoherent contributions described by the off-diagonal terms in the heat-flux operator, which are typically prevailing in glasses and disordered crystals. Furthermore, our work paves the way to a deeper understanding of glasslike thermal conductivity in complex crystals with strong anharmonicity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Chemical and steric effects in simulating noncontact atomic force microscopy images of organic molecules on a Cu (111) substrate

Noncontact mode of atomic force microscopy (nc-AFM) employing a CO-functionalized tip is a very powerful tool for studying molecular structures. However, interpreting nc-AFM images for nonplanar molecules can sometimes be problematic. To illustrate and resolve the nature of such problematic systems, we employ real-space pseudopotentials constructed within density functional theory to simulate nc-AFM images. In this work, we focus on several representative nonplanar organic molecules (pentacene, naphthanthrone, olympicene, and 6-phenylhexa-1,3,5-triynybenzene (PHTB)) on a typical substrate: the Cu (111) surface. This substrate results in significant distortions in the molecular geometries of pentacene and naphthanthrone. Including these distortions in simulated nc-AFM imaging notably improves the agreement between the simulated and measured images. In naphthanthrone, the relatively large interaction between the O atom and the Cu substrate offers a straightforward explanation for the absence of the C = O bond in the measured image. Nonplanar features such as tilting or twisting are also apparent in olympicene and PHTB. A “triangular” bright feature associated with the –CH 2 group in olympicene appears in simulated and measured nc-AFM images. This feature is directly related to the tilting angle of the molecule with respect to the Cu substrate. The “defective” benzene ring feature and the faint ellipsoidal C ≡ C feature in PHTB can be ascribed to its twisted nature. The ability to simulate such subatomic images in nc-AFM reflects the accuracy and efficiency of calculating quantum forces in real space.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

First-principles characterization of the magnetic properties of Cu 2 (OH) 3 Br

Low-dimensional spin-1/2 transition metal oxides and oxyhalides continue to be at the forefront of research investigating nonclassical phases such as quantum spin liquids. In this work, we examine the magnetic properties of the oxyhalide Cu 2 (OH) 3 Br in the botallackite structure using first-principles density functional theory, linear spin-wave theory, and exact diagonalization calculations. This quasi-two-dimensional system consists of Cu 2+ S = 1/2 moments arranged on a distorted triangular lattice. Our exact diagonalization calculations, which rely on a first-principles-based magnetic model, generate spectral functions consistent with inelastic neutron scattering data. By performing computational experiments to disentangle the chemical and steric effects of the halide ions, we find that the dominant effect of the halogen ions is steric in the Cu 2 (OH) 3 X series of compounds.

36 MATERIALS SCIENCE↗