Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Computer model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

A reacting multiphase computational flow model for 2,3-butanediol synthesis in industrial-scale bioreactors

The microbe, Zymomonas mobilis, can efficiently convert sugars to 2,3 butanediol (BDO), an important intermediate for downstream chemical products, only in a well-controlled microaerated environment. However, controlling oxygen distribution in industrial-scale bioreactors is challenging, and at-scale BDO production is hard to optimize using traditional engineering methods. This study takes a step towards addressing this problem through a computational model for reacting multiphase flows in large-scale bioreactors. A phenomenological metabolic model was first developed and validated against experiments, and then it was coupled to a multiphase computational fluid dynamics (CFD) solver using a subcycling algorithm for simulating long conversion times (~30 hours). Large-scale (~500 m 3 ) bubble column simulations using this coupled approach demonstrated a 25% improvement in BDO yield with low sparging rates (0.002 m/s) and low height-to-diameter ratio (0.875) compared to a baseline bubble column (35 m height, 5 m diameter) with a superficial gas velocity of 0.06 m/s.

09 BIOMASS FUELS↗
NASA NTRS2004

Discharge Chamber Primary Electron Modeling Activities in Three-Dimensions

Designing discharge chambers for ion thrusters involves many geometric configuration decisions. Various decisions will impact discharge chamber performance with respect to propellant utilization efficiency, ion production costs, and grid lifetime. These hardware design decisions can benefit from the assistance of computational modeling. Computational modeling for discharge chambers has been limited to two-dimensional codes that leveraged symmetry for interpretation into three-dimensional analysis. This paper presents model development activities towards a three-dimensional discharge chamber simulation to aid discharge chamber design decisions. Specifically, of the many geometric configuration decisions toward attainment of a worthy discharge chamber, this paper focuses on addressing magnetic circuit considerations with a three-dimensional discharge chamber simulation as a tool. With this tool, candidate discharge chamber magnetic circuit designs can be analyzed computationally to gain insight into factors that may influence discharge chamber performance such as: primary electron loss width in magnetic cusps, cathode tip position with respect to the low magnetic field volume, definition of a low magnetic field region, and maintenance of a low magnetic field region across the grid span. Corroborating experimental data will be obtained from mockup hardware tests. Initially, simulated candidate magnetic circuit designs will resemble previous successful thruster designs. To provide opportunity to improve beyond previous performance benchmarks, off-design modifications will be simulated and experimentally tested.

Steuber, Thomas J.↗
DOE OSTI2023

(Project 18-15502) Reducing Uncertainty in Radionuclide Transport Prediction Using Multiple Environmental Tracers (Final Report)

In order to successfully site and design a nuclear waste disposal facility, DOE scientists are required to show safe containment of the radioactive waste for up to 1 million years. A significant hurdle to accurately and convincingly demonstrating disposal safety is predicting the fate of radioactive elements once they enter the groundwater system surrounding the repository. These predictions are often made with computer models, which contain accurate physics of groundwater movement and chemical reactions that occur during groundwater flow. As computer power increases, the physics and chemistry of these computer simulators can become more and more realistic and the physically based error decreases. However, the ability of these computer models to provide accurate predictions in a specific place, over long time periods, requires the scientists and engineers to know the subsurface properties of the Earth that control groundwater movement. In particular, groundwater scientists and engineers need to know the groundwater fluid velocity, which can change over time and strongly vary with location within the groundwater system. Because the Earth’s subsurface cannot be directly seen, and can only be sampled at drilling locations, the properties of the groundwater system are never known completely, and computer models of groundwater transport will always have some amount of uncertainty. This project’s principal goal was to use chemicals and isotope “tracers”, which have been introduced to the groundwater system by natural processes over long time periods, to help inform computer models of the groundwater velocity and subsurface properties. The goal was to calculate how much better predictions of groundwater transport were when these “tracers” were used to inform the computer models.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2025

Modeling betatron radiation using particle-in-cell codes for plasma wakefield accelerator diagnostics

The analysis of plasma wakefield acceleration experimental measurements, particularly in the characterization of photons emitted through the betatron radiation mechanism, requires the development of accurate numerical models. These computational models are crucial for supporting modern instrumentation designed to measure the single-shot, double-differential angular-energy radiation spectra resulting from interactions between beams and plasmas. Motivated by the needs of such applications, this paper presents detailed numerical models of betatron radiation generated in beam-plasma acceleration experiments. These models are based on the integration of the Liénard-Wiechert (LW) potentials, applied to computed particle trajectories. The particle trajectories are generated using three distinct methods: first, by tracking particles through idealized fields in the blowout regime of PWFA; second, by obtaining trajectories using the fast quasistatic particle-in-cell (PIC) code quickpic; and third, obtaining trajectories from the fully self-consistent PIC code osiris. To ensure the accuracy and reliability of these models, the paper includes various benchmark tests using analytical expressions, as well as employing the PIC code epoch, which takes an alternative approach by using a Monte Carlo quantum electrodynamics (QED)-based radiation model. Additionally, the paper presents simulations of the expected experimental betatron radiation spectra, taking into account parameters relevant to PWFA and plasma photocathode experiments at the SLAC FACET-II facility.

Yadav, M. [University of California, Los Angeles, ↗
NASA NTRS1979

Development of a Model and Computer Code to Describe Solar Grade Silicon Production Processes

The program aims at developing mathematical models and computer codes based on these models, which allow prediction of the product distribution in chemical reactors for converting gaseous silicon compounds to condensed-phase silicon. The major interest is in collecting silicon as a liquid on the reactor walls and other collection surfaces. Two reactor systems are of major interest, a SiCl4/Na reactor in which Si(l) is collected on the flow tube reactor walls and a reactor in which Si(l) droplets formed by the SiCl4/Na reaction are collected by a jet impingement method. During this quarter the following tasks were accomplished: (1) particle deposition routines were added to the boundary layer code; and (2) Si droplet sizes in SiCl4/Na reactors at temperatures below the dew point of Si are being calculated.

Srivastava, R.↗
DOE OSTI2025

Bayesian D‐Optimal Designs for Gaussian Process Surrogate Models

Computer experiments often employ space-filling strategies to create surrogate models with strong predictive performance. The impact of model parameter estimation for Gaussian process surrogates, however, is often overlooked. Obtaining a better initial estimate of the covariance lengthscale parameter, θ, can greatly improve the resulting Gaussian process fit through more effective sequential acquisitions during active learning. In this work, we propose a novel initial design maximizing the Bayesian D-optimality criterion of the Gaussian process lengthscale parameter. Previously published results have shown the emphasis on lengthscale estimation to be promising, but relied on an empirically driven design creation process. Our Bayesian D-optimal designs are rooted in information theory and lead to more informative sequential acquisitions by improving lengthscale estimation. In many cases, these gains eventually result in better surrogates than those seeded with space-filling initial designs. Furthermore, Bayesian D-optimal designs can be tailored to either isotropic or anisotropic covariance structures, and the Bayesian framework enables the inclusion of prior knowledge in the design process, offering greater flexibility and adaptability. Through several simulation studies, we demonstrate the advantages of Bayesian D-optimal designs in terms of both lengthscale estimation accuracy and predictive performance during active learning.

Bayesian experimental design↗
NASA NTRS1994

Development of microgravity, full body functional reach envelope using 3-D computer graphic models and virtual reality technology

In microgravity conditions mobility is greatly enhanced and body stability is difficult to achieve. Because of these difficulties, optimum placement and accessibility of objects and controls can be critical to required tasks on board shuttle flights or on the proposed space station. Anthropometric measurement of the maximum reach of occupants of a microgravity environment provide knowledge about maximum functional placement for tasking situations. Calculations for a full body, functional reach envelope for microgravity environments are imperative. To this end, three dimensional computer modeled human figures, providing a method of anthropometric measurement, were used to locate the data points that define the full body, functional reach envelope. Virtual reality technology was utilized to enable an occupant of the microgravity environment to experience movement within the reach envelope while immersed in a simulated microgravity environment.

Lindsey, Patricia F.↗
NASA NTRS2002

A computational model-based validation of Guyton's analysis of cardiac output and venous return curves

Guyton developed a popular approach for understanding the factors responsible for cardiac output (CO) regulation in which 1) the heart-lung unit and systemic circulation are independently characterized via CO and venous return (VR) curves, and 2) average CO and right atrial pressure (RAP) of the intact circulation are predicted by graphically intersecting the curves. However, this approach is virtually impossible to verify experimentally. We theoretically evaluated the approach with respect to a nonlinear, computational model of the pulsatile heart and circulation. We developed two sets of open circulation models to generate CO and VR curves, differing by the manner in which average RAP was varied. One set applied constant RAPs, while the other set applied pulsatile RAPs. Accurate prediction of intact, average CO and RAP was achieved only by intersecting the CO and VR curves generated with pulsatile RAPs because of the pulsatility and nonlinearity (e.g., systemic venous collapse) of the intact model. The CO and VR curves generated with pulsatile RAPs were also practically independent. This theoretical study therefore supports the validity of Guyton's graphical analysis.

NASA Discipline Cardiopulmonary↗
NASA NTRS1984

Manual of phosphoric acid fuel cell stack three-dimensional model and computer program

A detailed distributed mathematical model of phosphoric acid fuel cell stack have been developed, with the FORTRAN computer program, for analyzing the temperature distribution in the stack and the associated current density distribution on the cell plates. Energy, mass, and electrochemical analyses in the stack were combined to develop the model. Several reasonable assumptions were made to solve this mathematical model by means of the finite differences numerical method.

Lu, C. Y.↗
NASA NTRS1982

Turbulence modeling for computational aerodynamics

The status of turbulence modeling for external aerodynamic flows is reviewed, and closure concepts for the compressible form of the Reynolds-averaged Navier-Stokes equations are briefly outlined to establish a framework for comparison. The importance of experimental requirements for developing and verifying turbulence models is emphasized. Attention is then given to three important flow categories: attached flows, separating and reattaching flows, and trailing-edge flows. Examples of comparisons between experiments and computations for twoand three-dimensional flows are presented to illustrate the status of modeling. It is shown that, for most two-dimensional attached flows, eddy viscosity concepts will probably be adequate. For attached three-dimensional flows, however, eddy-viscosity and Reynolds-stress models are both deficient, failing to predict the proper surface shear-stress in rapidly skewing boundary layers, regardless of whether they are pressure driven or strain driven.

Marvin, J. G.↗
NASA NTRS1990

A computationally efficient model for turbulent droplet dispersion in spray combustion

A novel model for turbulent droplet dispersion is formulated having significantly improved computational efficiency in comparison to the conventional point source stochastic sampling methodology. In the proposed model, a computational parcel representing a group of physical particles is considered to have a normal (Gaussian) probability density function (PDF) in three-dimensional space. The mean of each PDF is determined by Lagrangian tracking of each computational parcel, either deterministically or stochastically. The variance is represented by a turbulence-induced mean squared dispersion which is based on statistical inferences from the linearized direct modeling formulation for particle/eddy interactions. Convolution of the computational parcel PDF's produces a single PDF for the physical particle distribution profile. The validity of the new model is established by comparison with the conventional stochastic sampling method, where in each parcel is represented by a delta function distribution, for non-evaporating particles injected into simple turbulent air flows.

Litchford, Ron J.↗
DOE OSTI2025

Performance Analysis and Simulaion of the Hydraulic Scram System in TREAT Reactor

The Transient Reactor Test Facility (TREAT) at Idaho National Laboratory (INL) serves a vital role in nuclear fuel safety research, enabling transient experiments that simulate reactivity excursions and accident scenarios. Central to these operations is the transient control rod drive system (TCRDS), which drives rapid motion of the transient control rods such that TREAT can simulate rapid power changes typical of reactor accidents. The reliability and performance of this system are critical for protecting both fuel specimens and reactor infrastructure. This study presents the initial phase of a two-year investigation into the dynamics and reliability of the TREAT hydraulic TCRDS. Conducted in collaboration with INL, the research employs a combined computational and experimental approach to analyze the system's response time, pressure transients, and potential failure modes. Emphasis is placed on understanding how fluid characteristics influence the TCRDS’s ability to achieve both rapid power changes and mechanical stability. The TRDS and the skid that powers it will be analyzed throughout this investigation. Computational modeling using computational fluid dynamics (CFD) will simulate the hydraulic response under varying conditions. In parallel, experimental testing planned at INL will validate these models and capture key performance metrics. This paper outlines the system design, analytical framework, and modeling strategies that form the foundation for later testing. Ultimately, this work aims to support improvements to the TCRDS’s design and reliability, contributing to the broader goal of enhancing nuclear fuel safety and sustaining TREAT’s mission as a premier nuclear fuel test facility.

21 - SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLAN↗
NASA NTRS1975

Bringing wings of change - NASA's airfoil research program

A review is presented of progress in attaining technical objectives in three areas of semiautomatic airfoil development: software, hardware, and applications. Software objectives seek improved mathematical models and computer codes for flow analysis and design optimization for a variety of conditions. The 17-step iterative computer model used in designing the GA (W)-1 airfoil is effective but not yet fully automated; with present methods only single-point computer optimization is possible. Hardware objectives calling for improvement in test facilities and techniques are met in part by the introduction of the Langley (F-3C) wind tunnel for independent evaluation of transonic Mach number and Reynolds effects up to 12-16 million, and by a two-dimensional test section for the Langley 1/3 transonic cryogenic tunnel which will extend the Reynolds number to 50 million. The current status of low-speed, thin, and rotorcraft airfoil development programs is discussed.

Pierpont, P. K.↗
NASA NTRS2007

Two-Dimensional Flow Control Analysis on the Hump Model

Computational analyses have been conducted on the Wall-mounted Glauert-Goldschmied type body ("hump" model) with the Full Unstructured Navier-Stokes 2-D (FUN2D) flow solver developed at NASA LaRC. This investigation uses the time-accurate Reynolds-averaged Navier- Stokes (RANS) approach to predict aerodynamic performance of the active flow control experimental database for the hump model. The workshop is designed to assess the current capabilities of different classes of turbulent flow solution methodologies, such as RANS, to predict flow fields induced by synthetic jets and separation control geometries. The hump model being studied is geometrically similar to that previously tested both experimentally and computationally at NASA LaRC [ref. 1 and 2, respectively].

Viken, Sally A.↗
NASA NTRS1984

Manual of phosphoric acid fuel cell power plant optimization model and computer program

An optimized cost and performance model for a phosphoric acid fuel cell power plant system was derived and developed into a modular FORTRAN computer code. Cost, energy, mass, and electrochemical analyses were combined to develop a mathematical model for optimizing the steam to methane ratio in the reformer, hydrogen utilization in the PAFC plates per stack. The nonlinear programming code, COMPUTE, was used to solve this model, in which the method of mixed penalty function combined with Hooke and Jeeves pattern search was chosen to evaluate this specific optimization problem.

Lu, C. Y.↗
NASA NTRS2015

Computational Process Modeling for Additive Manufacturing (OSU)

Powder-Bed Additive Manufacturing (AM) through Direct Metal Laser Sintering (DMLS) or Selective Laser Melting (SLM) is being used by NASA and the Aerospace industry to "print" parts that traditionally are very complex, high cost, or long schedule lead items. The process spreads a thin layer of metal powder over a build platform, then melts the powder in a series of welds in a desired shape. The next layer of powder is applied, and the process is repeated until layer-by-layer, a very complex part can be built. This reduces cost and schedule by eliminating very complex tooling and processes traditionally used in aerospace component manufacturing. To use the process to print end-use items, NASA seeks to understand SLM material well enough to develop a method of qualifying parts for space flight operation. Traditionally, a new material process takes many years and high investment to generate statistical databases and experiential knowledge, but computational modeling can truncate the schedule and cost -many experiments can be run quickly in a model, which would take years and a high material cost to run empirically. This project seeks to optimize material build parameters with reduced time and cost through modeling.

Bagg, Stacey↗
NASA NTRS1987

Development of response models for the Earth Radiation Budget Experiment (ERBE) sensors. Part 1: Dynamic models and computer simulations for the ERBE nonscanner, scanner and solar monitor sensors

Dynamic models and computer simulations were developed for the radiometric sensors utilized in the Earth Radiation Budget Experiment (ERBE). The models were developed to understand performance, improve measurement accuracy by updating model parameters and provide the constants needed for the count conversion algorithms. Model simulations were compared with the sensor's actual responses demonstrated in the ground and inflight calibrations. The models consider thermal and radiative exchange effects, surface specularity, spectral dependence of a filter, radiative interactions among an enclosure's nodes, partial specular and diffuse enclosure surface characteristics and steady-state and transient sensor responses. Relatively few sensor nodes were chosen for the models since there is an accuracy tradeoff between increasing the number of nodes and approximating parameters such as the sensor's size, material properties, geometry, and enclosure surface characteristics. Given that the temperature gradients within a node and between nodes are small enough, approximating with only a few nodes does not jeopardize the accuracy required to perform the parameter estimates and error analyses.

Halyo, Nesim↗