Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Comparative Study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

The transmission or scattering of elastic waves by an inhomogeneity of simple geometry: A comparison of theories

The extended method of equivalent inclusions is applied to study the specific wave problems: (1) the transmission of elastic waves in an infinite medium containing a layer of inhomogeneity, and (2) the scattering of elastic waves in an infinite medium containing a perfect spherical inhomogeneity. Eigenstrains are expanded as a geometric series and a method of integration based on the inhomogeneous Helmholtz operator is adopted. This study compares results, obtained by using limited number of terms in the eigenstrain expansion, with exact solutions for the layer problem and that for a perfect sphere.

Sheu, Y. C.↗

Science return from ISEE-3 at comet Giacobini-Zinner

The spacecraft ISEE-3 will be sent to encounter the Giacobini-Zinner comet in September 1985 during the period of intense Halley observations. This mission provides a unique opportunity for comparative study of important dynamical processes at both short and long term comets.

Scarf, F. L.↗

An evaluation of Space Shuttle Orbiter forward fuselage surface pressures - Comparison with wind tunnel and theoretical predictions

In order for ground-based pressure distribution techniques to be verified by the actual performance of the Space Shuttle Orbiter in flight, a comparative study of flight pressure data and both wind tunnel and computational data is presented. The flight pressure data, obtained from measurements on the Orbiter's surface during atmospheric reentry, are part of the overall Orbiter flight data system designated Development Flight Instrumentation. Also given is an analysis of the Orbiter pressure data system, including its transducers, their behavior, and their calibration. The two analyses are the bases of an error assessment calculation for the flight data, as well as an explanation of any discrepancies between flight and ground-based data.

Bradley, P. F.↗

Diameters of Triton and Pluto

The Neptune satellite Triton and the planet Pluto, whose diameter and albedo must be estimated by indirect methods, invite comparative study because of their similar brightness and current distance of 30 AU from the sun. IR spectroscopy has detected methane on both objects. Upper limits are given for the thermal IR emission from these objects which allow the determination of significant upper diameter limits. It is also demonstrated that both are high albedo objects, excluding the possibility that Triton is the largest planetary satellite and consistent with the small Pluto dimensions deduced from other data

Morrison, D.↗

Comparison of CARS combustion temperatures with standard techniques

This paper describes a comparative study of temperatures measured with Coherent Anti-Stokes Raman Spectroscopy (CARS) and those using standard measurement techniques. CARS temperatures from nitrogen vibrational-rotational spectra have been obtained in a premixed hydrogen-air laboratory flame supported on a flat flame burner over a temperature range from about 1000 K to 2100 K. The techniques used for comparison were sodium line reversal, thin wire thermocouples and heat balance calculations. These studies show a good agreement over the entire temperature range studied.

Antcliff, R. R.↗

Advanced propfan engine characteristics and technology needs

A comparative study is presented for two of the advanced gas turbine engine designs developed in the course of a proprietary research effort for the NASA Advanced Propfan Engine Technology research program. In these engines, a cycle pressure ratio of 32.5:1 and a 2500 F maximum turbine temperature provide fuel efficient operation in the 32,000-ft altitude, Mach 0.72 cruise speed regime stipulated. Both of the engine configurations incorporate three spools, of which the compressors are dual-spool and the power turbines are free. A major design challenge for axial compressors in the 10,000-shp class was the maintenance of adequate blade heights in the later stages.

Anderson, R. D.↗

Computer simulations of space-borne meteorological systems on the CYBER 205

Because of the extreme expense involved in developing and flight testing meteorological instruments, an extensive series of numerical modeling experiments to simulate the performance of meteorological observing systems were performed on CYBER 205. The studies compare the relative importance of different global measurements of individual and composite systems of the meteorological variables needed to determine the state of the atmosphere. The assessments are made in terms of the systems ability to improve 12 hour global forecasts. Each experiment involves the daily assimilation of simulated data that is obtained from a data set called nature. This data is obtained from two sources: first, a long two-month general circulation integration with the GLAS 4th Order Forecast Model and second, global analysis prepared by the National Meteorological Center, NOAA, from the current observing systems twice daily.

Halem, M.↗

A development of logistics management models for the Space Transportation System

A new analytic queueing approach was described which relates stockage levels, repair level decisions, and the project network schedule of prelaunch operations directly to the probability distribution of the space transportation system launch delay. Finite source population and limited repair capability were additional factors included in this logistics management model developed specifically for STS maintenance requirements. Data presently available to support logistics decisions were based on a comparability study of heavy aircraft components. A two-phase program is recommended by which NASA would implement an integrated data collection system, assemble logistics data from previous STS flights, revise extant logistics planning and resource requirement parameters using Bayes-Lin techniques, and adjust for uncertainty surrounding logistics systems performance parameters. The implementation of these recommendations can be expected to deliver more cost-effective logistics support.

Carrillo, M. J.↗

Flight crew performance when pilot-flying and pilot-not-flying duties are exchanged

This study compares reports from the ASRS database depicting operational anomalies related to flight crew performance when pilot-flying and pilot-not-flying duties were exchanged. A greater number of near midair collisions, takeoff anomalies, and crossing altitude deviations were reported when the Captain was flying. More altitude deviations, near midair collisions during approach, and landing incidents occurred when the First Officer was flying. There were differences in monitoring effectiveness and in the type and distribution of information transfer problems associated with the anomalies. In addition, a number of crew performance factors were noted that were not affected by the exchange of duties. Several of these were deemed important enough to be included as matter of general interest.

Orlady, H. W.↗

A comparison between GO/aperture-field and physical-optics methods for offset reflectors

Both geometrical optics (GO)/aperture-field and physical-optics (PO) methods are used extensively in the diffraction analysis of offset parabolic and dual reflectors. An analytical/numerical comparative study is performed to demonstrate the limitations of the GO/aperture-field method for accurately predicting the sidelobe and null positions and levels. In particular, it is shown that for offset parabolic reflectors and for feeds located at the focal point, the predicted far-field patterns (amplitude) by the GO/aperture-field method will always be symmetric even in the offset plane. This, of course, is inaccurate for the general case and it is shown that the physical-optics method can result in asymmetric patterns for cases in which the feed is located at the focal point. Representative numerical data are presented and a comparison is made with available measured data.

Rahmat-Samii, Y.↗

Comparison of NAVSTAR satellite L band ionospheric calibrations with Faraday rotation measurements

It is pointed out that interplanetary navigation at the Jet Propulsion Laboratory (JPL) is performed by analyzing measurements derived from the radio link between spacecraft and earth and, near the target, onboard optical measurements. For precise navigation, corrections for ionospheric effects must be applied, because the earth's ionosphere degrades the accuracy of the radiometric data. These corrections are based on ionospheric total electron content (TEC) determinations. The determinations are based on the measurement of the Faraday rotation of linearly polarized VHF signals from geostationary satellites. Problems arise in connection with the steadily declining number of satellites which are suitable for Faraday rotation measurements. For this reason, alternate methods of determining ionospheric electron content are being explored. One promising method involves the use of satellites of the NAVSTAR Global Positioning System (GPS). The results of a comparative study regarding this method are encouraging.

Royden, H. N.↗

Determining soil moisture from geosynchronous satellite infrared data - A feasibility study

Numerical modelling results are reported from a pilot study investigating the feasibility of developing a technique for daily soil moisture measurement throughout the world, based on GOES infrared data. A detailed one-dimensional boundary layer-surface-soil model was used in order to determine which physical parameters observable from GOES are most sensitive to soil moisture, and which are most effected by seasonal changes, atmospheric effects and vegetation cover. The results of the sensitivity test show that the mid-morning differential of surface temperature with respect to absorbed solar radiation is optimally sensitive to soil moisture. A case study comparing model results with GOES infrared data confirms the sensitivity of this parameter to soil moisture and also confirms the applicability of the model to predicting area-averaged surface temperature changes. Model measurements of soil moisture are expected to be most accurate for dry or marginal agricultural areas where drought is common. Sources of error, including the advection of clouds, are examined and methods of minimizing error are discussed.

Wetzel, P. J.↗

Rendezvous and docking with remote piloted vehicles

The man-in-the-loop control system requirements for the Orbital Maneuvering Vehicle (OMV) are examined. Since many similarities exist between the Teleoperator Retrieval System (TRS) and the unfolding OMV concept, a review of the TRS control system baseline along with selected design trades which led to that baseline are discussed. TRS program issues relevant to the man-in-the-loop control system design include thruster size, communication delays and TV bandwidth compression, range/range rate radar, tumbling targets, shimmed docking interface, and control system definition. A TRS vs. OMV simulation comparative study is summarized, and the major issues currently facing the control system designer on OMV are discussed.

Micheal, J. D.↗

Graphite fiber intercalation: Dynamics of the bromine intercalation process

The resistance of pitch-based graphite fibers was monitored, in situ, during a series of bromine intercalation experiments. The threshold pressure for the bromine intercalation of pitch-based fibers was estimated to be 102 torr. When the bromine atmosphere was removed from the reaction chamber, the resistivity of the intercalated graphite fibers increased consistently. This increase was attributed to loss of bromine from the perimeter of the fiber. The loss was confirmed by mapping the bromine concentration across the diameter of single intercalated fibers with either energy dispersive spectroscopy or scanning Auger microscopy. A statistical study comparing fibers intercalated in bromine vapor with fibers intercalated in bromine liquid showed that similar products were obtained with both methods of intercalation.

Jaworske, D. A.↗

Fast drift kilometric radio bursts and solar proton events

Initial results of a comparative study of major fast drift kilometric bursts and solar proton events from Sep. 1978 to Feb. 1983 are presented. It was found that only about half of all intense, long duration ( 40 min above 500 sfu) 1 MHz bursts can be associated with F 20 MeV proton events. However, for the subset of such fast drift bursts accompanied by metric Type 2 and/or 4 activity (approximately 40% of the total), the degree of association with 20 MeV events is 80%. For the reverse association, it was found that proton events with J( 20 MeV) 0.01 1 pr cm(-2)s(-1)sr(-1)MeV(-1) were typically (approximately 80% of the time) preceded by intense 1 MHz bursts that exceeded the 500 sfu level for times 20 min (median duration approximately 35 min).

Cliver, E. W.↗

Measurements of energy distribution in microwave plasmas of N2 and He and comparisons with results for H2

An electrothermal propulsion concept utilizing a microwave plasma system as the mechanism to convert electromagnetic energy into translational energy of the flowing gas is being investigated. Specifically, this study compares the energy transfer characteristics of three different gases, H2, N2, and He, to gain some insight as to the dominant energy transfer processes present in a microwave plasma. A calorimetric experimental system has been designed and built enclosing the microwave plasma system to accurately determine the net energy transferred to the flowing gas. Results are obtained for N2 and He discharges and compared with previously reported experimental results for H2.

Chapman, R.↗

Coherent infrared lidar mission and technology needs for measurements of transport and concentration of tropospheric trace species

The science justification and the feasibility of aircraft-based CO2 Doppler lidar measurements of transport between the free troposphere and the stratosphere (or planetary boundary layer) are discussed for a wide range of seasonal and geographic conditions. Ground-based coherent CO2 lidar aerosol scattering experiments using a stable ring resonator (about 50 mJ/pulse) CO2 laser with external injection locking are reported. Comparative studies of injection-locked CO2 laser unstable resonators and master oscillator power amplifiers are reported for future CO2 lidar missions with respect to requirements of pulse energy, duration/shape, frequency chirp, efficiency for heterodyne detection, and combined Doppler lidar and Differential Absorption Lidar missions.

Hess, R. V.↗

Constrained optimization for image restoration using nonlinear programming

The constrained optimization problem for image restoration, utilizing incomplete information and partial constraints, is formulated using nonlinear proramming techniques. This method restores a distorted image by optimizing a chosen object function subject to available constraints. The penalty function method of nonlinear programming is used. Both linear or nonlinear object function, and linear or nonlinear constraint functions can be incorporated in the formulation. This formulation provides a generalized approach to solve constrained optimization problems for image restoration. Experiments using this scheme have been performed. The results are compared with those obtained from other restoration methods and the comparative study is presented.

Yeh, C.-L.↗