Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Combustion modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

A Role of the Reaction Kernel in Propagation and Stabilization of Edge Diffusion Flames of C1-C3 Hydrocarbons

Diffusion flame stabilization is of essential importance in both Earth-bound combustion systems and spacecraft fire safety. Local extinction, re-ignition, and propagation processes may occur as a result of interactions between the flame zone and vortices or fire-extinguishing agents. By using a computational fluid dynamics code with a detailed chemistry model for methane combustion, the authors have revealed the chemical kinetic structure of the stabilizing region of both jet and flat-plate diffusion flames, predicted the flame stability limit, and proposed diffusion flame attachment and detachment mechanisms in normal and microgravity. Because of the unique geometry of the edge of diffusion flames, radical back-diffusion against the oxygen-rich entrainment dramatically enhanced chain reactions, thus forming a peak reactivity spot, i.e., reaction kernel, responsible for flame holding. The new results have been obtained for the edge diffusion flame propagation and attached flame structure using various C1-C3 hydrocarbons.

Takahashi, Fumiaki↗
NASA NTRS2002

Tackling a Hot Paradox: Laminar Soot Processes-2 (LSP-2)

The last place you want to be in traffic is behind the bus or truck that is belching large clouds of soot onto your freshly washed car. Besides looking and smelling bad, soot is a health hazard. Particles range from big enough to see to microscopic and can accumulate in the lungs, potentially leading to debilitating or fatal lung diseases. Soot is wasted energy, and therein lies an interesting paradox: Soot forms in a flame's hottest regions where you would expect complete combustion and no waste. Soot enhances the emissions of other pollutants (carbon monoxide and polyaromatic hydrocarbons, etc.) from flames and radiates unwanted heat to combustion chambers (a candle's yellowish glow is soot radiating heat), among other effects. The mechanisms of soot formation are among the most important unresolved problems of combustion science because soot affects contemporary life in so many ways. Although we have used fire for centuries, many fundamental aspects of combustion remain elusive, in part because of limits imposed by the effects of gravity on Earth. Hot or warm air rises quickly and draws in fresh cold air behind it, thus giving flames the classical teardrop shape. Reactions occur in a very small zone, too fast for scientists to observe, in detail, what is happening inside the flame. The Laminar Soot Processes (LSP-2) experiments aboard STS-107 will use the microgravity environment of space to eliminate buoyancy effects and thus slow the reactions inside a flame so they can be more readily studied. 'Laminar' means a simple, smooth fuel jet burning in air, somewhat like a butane lighter. This classical flame approximates combustion in diesel engines, aircraft jet propulsion engines, and furnaces and other devices. LSP-2 will expand on surprising results developed from its first two flights in 1997. The data suggest the existence of a universal relationship, the soot paradigm, that, if proven, will be used to model and control combustion systems on Earth. STS-107 experiments also will help set the stage for extended combustion experiments aboard the International Space Station.

Faeth, Gerard M.↗
NASA NTRS1993

Combustion of interacting droplet arrays in a microgravity environment

This research program involves the study of one and two dimensional arrays of droplets in a buoyant-free environment. The purpose of the work is to extend the database and theories that exist for single droplets into the regime where droplet interactions are important. The eventual goal being to use the results of this work as inputs to models on spray combustion where droplets seldom burn individually; instead the combustion history of a droplet is strongly influenced by the presence of the neighboring droplets. The emphasis of the present investigation is experimental, although comparison will be made to existing theoretical and numerical treatments when appropriate. Both normal gravity and low gravity testing will be employed, and the results compared. The work to date will be summarized in the next section, followed by a section detailing the future plans.

Dietrich, Daniel L.↗
NASA NTRS1995

Combustion of interacting droplet arrays in a microgravity environment

This research program involves the study of one and two dimensional arrays of droplets in a buoyant-free environment. The purpose of the work is to extend the database and theories that exist for single droplets into the regime where droplet interactions are important. The eventual goal being to use the results of this work as inputs to models on spray combustion where droplets seldom burn individually; instead the combustion history of a droplet is strongly influenced by the presence of the neighboring droplets. Throughout the course of the work, a number of related aspects of isolated droplet combustion have also been investigated. This paper will review our progress in microgravity droplet array combustion, advanced diagnostics (specifically L2) applied to isolated droplet combustion, and radiative extinction large droplet flames. A small-scale droplet combustion experiment being developed for the Space Shuttle will also be described.

Dietrich, Daniel L.↗
DOE OSTI2020

Cloud based tool for analysis of chemical kinetic mechanisms

The size and complexity of chemical kinetic models used to simulate combustion of hydrocarbon fuels continue to increase with our improved understanding of the underlying physical mechanisms, along with the improved ability to utilize such models as the result of increased computational power and efficiency. As mechanisms grow beyond thousands of species and tens of thousands of reactions, it becomes increasingly difficult to manually check for errors and physical inconsistencies. In this work, we present several automated methods to check for such issues in the specification of chemical reaction models. First, we demonstrate how discontinuities in thermodynamic data can cause simulation difficulties manifested as long wall-clock times and convergence failures. To correct this type of problem, we describe an automated method for refitting thermodynamic parameters. We also outline several methods to check the timescales of reaction rate coefficients to ensure physical consistency. All the methods are made available through a web-based tool (https://combustiontools.llnl.gov) intended to aid mechanism developers and users to improve the accuracy and performance of fuel models used by the combustion community.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Investigation of the effects of turbulence modeling on the prediction of compression-ignition combustion unsteadiness

Adverse effects of global warming due to the greenhouse gas emissions is changing the actual paradigm for the use energy resources. In the absence of a mid-term solution for reducing these emissions in transportation, internal combustion (IC) engines are going to coexist in the social spheres in the foreseeable future. Therefore, the study of other IC engine-related problems remains relevant to ensuring the health of the society. In this investigation, a numerical methodology for comprehensive understanding of Noise, Vibration and Harshness in internal combustion engines is proposed. Due to its inherent complexity and lack of awareness, the main objective is to evaluate the impact of the turbulence modeling framework on the in-cylinder acoustic field recreation. Modal decomposition methods have been applied to isolate the coherent flow structures and to analyze how they change with the turbulence approach. Results demonstrate that the choice of the turbulence model is a critical aspect for noise modeling. Unsteady Reynolds-Averaged Navier-Stokes schemes predict a raw estimation of the internal acoustic field with the added value of being computationally less expensive. However, the use of more complex turbulence approaches such us large eddy simulation offers an accurate prediction of the acoustic structures and their cyclic dispersion.

Broatch, A.↗
NASA NTRS1999

Testing of the Engineering Model Electrical Power Control Unit for the Fluids and Combustion Facility

The John H. Glenn Research Center at Lewis Field (GRC) in Cleveland, OH and the Sundstrand Corporation in Rockford, IL have designed and developed an Engineering Model (EM) Electrical Power Control Unit (EPCU) for the Fluids Combustion Facility, (FCF) experiments to be flown on the International Space Station (ISS). The EPCU will be used as the power interface to the ISS power distribution system for the FCF's space experiments'test and telemetry hardware. Furthermore. it is proposed to be the common power interface for all experiments. The EPCU is a three kilowatt 12OVdc-to-28Vdc converter utilizing three independent Power Converter Units (PCUs), each rated at 1kWe (36Adc @ 28Vdc) which are paralleled and synchronized. Each converter may be fed from one of two ISS power channels. The 28Vdc loads are connected to the EPCU output via 48 solid-state and current-limiting switches, rated at 4Adc each. These switches may be paralleled to supply any given load up to the 108Adc normal operational limit of the paralleled converters. The EPCU was designed in this manner to maximize allocated-power utilization. to shed loads autonomously, to provide fault tolerance. and to provide a flexible power converter and control module to meet various ISS load demands. Tests of the EPCU in the Power Systems Facility testbed at GRC reveal that the overall converted-power efficiency, is approximately 89% with a nominal-input voltage of 12OVdc and a total load in the range of 4O% to 110% rated 28Vdc load. (The PCUs alone have an efficiency of approximately 94.5%). Furthermore, the EM unit passed all flight-qualification level (and beyond) vibration tests, passed ISS EMI (conducted, radiated. and susceptibility) requirements. successfully operated for extended periods in a thermal/vacuum chamber, was integrated with a proto-flight experiment and passed all stability and functional requirements.

Kimnach, Greg L.↗
DOE OSTI2023

Modeling ash deposition and shedding during oxy-combustion of coal/rice husk blends at 70% inlet O2

Abstract Co-firing rice husk (RH) and coal with carbon capture using oxy-combustion presents a net carbon negative energy production opportunity. In addition, the high fusion temperature of the non-sticky, silica rich, RH can mitigate ash deposition as well as promote shedding of deposits. To identify the optimum operating conditions, fuel particle sizes, and blend ratios that minimize ash deposition, a Computational Fluid Dynamic methodology with add-on ash deposition and shedding models were employed to predict outer ash deposition and shedding rates during co-combustion of coal/RH in AIR and O 2 /CO 2 (70/30 vol%, OXY70) oxidizer compositions. After ensuring that the fly-ash particle size distributions and particle Stokes numbers near the deposition surface were accurately represented (to model impaction), appropriate models for coal ash and RH ash viscosities that were accurate in the temperature region (1200–1300 K) of interest in this study were identified. A particle viscosity and kinetic energy (PKE) based capture criterion was enforced to model the ash capture. An erosion/shedding criterion that takes the deposit melt fraction and the energy consumed during particle impact into account was also implemented. Deposition rate predictions as well as the deposition rate enhancement (OXY70/AIR) were in good agreement with measured values. While the OXY70 scenario was associated with a significant reduction (60%–70%) in flue gas velocities, it also resulted in larger fly-ash particles. As a result, the PKE distributions of the erosive RH ash were similar in both scenarios and resulted in similar shedding rates.

Energy & Fuels↗
NASA NTRS1992

Liquid rocket spray combustion stability analysis

A computational approach to the analysis of spray combustion stability in liquid rocket combustors is proposed which is based on the unsteady quasi-two-dimensional Euler equations with interphase source terms derived from a Lagrangian treatment of the combusting spray. Based on a preliminary evaluation, the computational methodology presented here is a promising research tool and a potential design/development aid for investigating the stability characteristics of liquid rocket engines. The method is characterized by low numerical noise; the Lagrangian treatment of the spray offers improved flexibility for the direct modeling of spray combustion.

Litchford, Ron J.↗
NASA NTRS2003

A Computational Method for Determining the Equilibrium Composition and Product Temperature in a LH2/LOX Combustor

In what follows, the model used for combustion of liquid hydrogen (LH2) with liquid oxygen (LOX) using chemical equilibrium assumption, and the novel computational method developed for determining the equilibrium composition and temperature of the combustion products by application of the first and second laws of thermodynamics will be described. The modular FORTRAN code developed as a subroutine that can be incorporated into any flow network code with little effort has been successfully implemented in GFSSP as the preliminary runs indicate. The code provides capability of modeling the heat transfer rate to the coolants for parametric analysis in system design.

Sozen, Mehmet↗
NASA NTRS2019

Infrared Measurements of Forward Heat Conduction during Simulated Microgravity Flame Spread in the Narrow Channel Apparatus

An infrared (IR) camera provides a way of examining temperature trends associated with simulated microgravity flame spread in the Narrow Channel Apparatus (NCA). The IR camera measures the surface temperature of solid poly methyl methacrylate (PMMA) fuel. These tests examine the forward conduction of heat ahead of the flame front in the non-thermally thin fuel.The NCA is a combustion wind tunnel that simulates a microgravity flame spread environment by employing a narrow gap between the fuel and ceiling of the device, limiting the effects of buoyancy. Test conditions of a 5 mm gap, mean opposed flow velocity of 15 cm/s, and fuel thickness of 3 mm are used.PMMA is selected as the fuel due to repeatability of test results, ease of computational modeling, and known combustion mechanics. Using specific lens and bandpass filter combinations the PMMA can be imaged as effectively opaque. The spectral emissivity for PMMA was calculated and incorporated into the calibration of the camera.Surface temperatures from the IR camera are compared to results from thermocouples embedded in the surface of the fuel. The IR camera results show that nontrivial forward conduction occurs during tests, and therefore must be included in computational models of the process.

Berry, Michael↗
NASA NTRS1996

Fundamental Phenomena on Fuel Decomposition and Boundary-Layer Combustion Precesses with Applications to Hybrid Rocket Motors: Experimental Investigation - Part 1

This final report summarizes the major findings on the subject of 'Fundamental Phenomena on Fuel Decomposition and Boundary-Layer Combustion Processes with Applications to Hybrid Rocket Motors', performed from 1 April 1994 to 30 June 1996. Both experimental results from Task 1 and theoretical/numerical results from Task 2 are reported here in two parts. Part 1 covers the experimental work performed and describes the test facility setup, data reduction techniques employed, and results of the test firings, including effects of operating conditions and fuel additives on solid fuel regression rate and thermal profiles of the condensed phase. Part 2 concerns the theoretical/numerical work. It covers physical modeling of the combustion processes including gas/surface coupling, and radiation effect on regression rate. The numerical solution of the flowfield structure and condensed phase regression behavior are presented. Experimental data from the test firings were used for numerical model validation.

Kuo, Kenneth K.↗
DOE OSTI2023

Direct numerical simulation of a turbulent methane/air flame impinged by a sub-breakdown electric field

Here, the effects of an external electric field on a turbulent methane/air diffusion flame are analyzed in this work using direct numerical simulations. The analyzed configuration consists of a temporally evolving mixing layer of air and a mixture of methane and nitrogen at 1 atm that is impinged by an electric field in the direction normal to the mean mixing plane. The combustion and chemi-ionization reactions involved in the flow are modeled using finite-rate chemistry and a reduced reaction scheme consisting of 26 species and 134 reactions. The mass diffusion and ion-wind effects are modeled using a detailed description of the diffusion coefficients and electric mobilities based on kinetic theory. The presented calculations show that the turbulence generated within the mixing layer is mostly unaffected by the applied electric field for the configuration under exam. In fact, the electric body force is developed away from the mixing region where the flow is uniform. Conversely, the turbulence is able to introduce very high intermittency in the electrically charged species concentration and, consequently, in the electric body force. Such intermittency will constitute a challenge in the future formulation of combustion models that take into account ion-wind effects.

09 BIOMASS FUELS↗
NASA NTRS1991

A simple recipe for modeling reaction-rate in flows with turbulent-combustion

A computationally viable scheme to account for chemical reaction in turbulent flows is presented. The multivariate beta-pdf model for multiple scalar mixing forms the basis of this scheme. Using the model scalar joint pdf and a general form of the instantaneous reaction-rate, the unclosed chemical reaction terms are expressed as simple functions of scalar means and the turbulent scalar energy. The calculation procedure requires that the mean scalar equations and only one other transport equation - for the turbulent scalar energy - be solved.

Girimaji, Sharath S.↗
NASA NTRS1981

Operating characteristics of the Langley Mach 7 Scramjet Test Facility

Operating characteristics of the Langley Mach 7 Scramjet Test Facility are described. The facility is designed for testing airframe integrated scramjet (supersonic combustion ramjet) engine models. Features include duplication of the flight Mach number total enthalpy, flight altitude simulation, and simulation of engine airframe integration effects such a bow shock wave precompression and boundary layer ingestion by the engine. Data obtained from facility calibration and from tests of a hydrogen burning, airframe integrated scramjet are discussed. An adverse interaction between the facility flow and the scramjet engine flow during combustion of the fuel is described.

Guy, R. W.↗
DOE OSTI2021

Tailored Bioblendstocks With Low Environmental Impact To Optimize MCCI Engines

This project seeks to overcome impediments to expansion of algae cultivation and conversion into fuels to displace petroleum and reduce greenhouse gas (GHG) emissions. The overall objective of the project is to develop and demonstrate a microalgae bio-blendstock with greater than 60% greenhouse gas reduction relative to petroleum diesel, reduce sooting propensity, increase cetane number, improve engine thermal efficiency relative to a baseline diesel engine operating on conventional fuel. These objectives are being accomplished by: Applying cultivation of algae polycultures to achieve robustness and productivity, Converting whole algae to bio-hydrocarbons via Hydrothermal Liquefaction (HTL) to make a biocrude and up-grading the biocrude via hydroprocessing to obtain tailored bioblendstocks for diesel fuel, Optimizing diesel (MCCI) combustion through blending model compounds into diesel fuel to represent the tailored bioblendstocks through experiments and numerical simulation.

09 BIOMASS FUELS↗
DOE OSTI2026

Aviation Fuel Characterization at Operationally Relevant Conditions

To accelerate approval and potentially expand the allowable property range for aviation fuels, we are using high performance computing simulations to reveal fuel property effects on aviation combustor performance. These simulations are supported by fuel property measurements over temperatures and pressures that the fuel experiences in an aircraft engine and by validated chemical kinetics models for SAF combustion. Here we report density, viscosity, and surface tension results for conventional jet fuel and multiple synthetic fuels from -30 degrees Celsius to 200 degrees Celsius (-40 degrees Celsius for viscosity) and 1 atm to 70 atm including an assessment of method repeatability. Properties of surrogate mixtures are also investigated. Distillation, ICN, LHV, flashpoint, and Cp are also reported, and data are being used to develop models to predict fuel properties from composition (GCxGC).

33 ADVANCED PROPULSION SYSTEMS↗
NASA NTRS1999

Dynamics of Droplet Extinction in Slow Convective Flows

The classical model for droplet combustion predicts that the square of the droplet diameter decreases linearly with time. It also predicts that a droplet of any size will burn to completion over a period of time. However, it has been known for some time that under certain conditions flames surrounding a droplet, in a quiescent environment, could extinguish because of insufficient residence time for the chemistry to proceed to completion. This type of extinction that occurs for smaller droplets has been studied extensively in the past. Large droplets, on the other hand, exhibit a different type of extinction where excessive radiative heat loss from the flame zone leads to extinction. This mode of "radiative extinction" was theoretically predicted for droplet burning by Chao et al. and was observed in recent space experiments in a quiescent environment. Thus far, the fundamental flammability limit prescribed by radiative extinction of liquid droplets has been measured only under quiescent environmental conditions. In many space platforms, however, ventilation systems produce small convective flows and understanding of the influences of this convection on the extinction process will help better define the radiative extinction flammability boundaries. Boundaries defined by experiments and captured using theoretical models could provide enhanced fire safety margin in space explor1999063d investigation of convective effects will help in interpretations of burning-rate data obtained during free-floated droplet combustion experiments with small residual velocities.

Nayagam, V.↗