Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Climate Zone”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

647 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Stable Methane Isotopologues From Northern Lakes Suggest That Ebullition Is Dominated by Sub‐Lake Scale Processes

Abstract Stable isotopes have emerged as popular study targets when investigating emission of methane (CH 4 ) from lakes. Yet little is known on how isotopic patterns conform to variations in emission magnitudes—a highly relevant question. Here, we present a large multiyear data set on stable isotopes of CH 4 ebullition (bubbling) from three small adjacent subarctic lakes. The δ 13 C‐CH 4 and δD‐CH 4 range from −78.4‰ to −53.1‰ and from −369.8‰ to −218.8‰, respectively, and vary greatly among the lakes. The signatures suggest dominant hydrogenotrophic methanogenesis, particularly in the deep zones, but there are also signals of seemingly acetoclastic production in some high fluxing shallow areas, possibly fueled by in situ vegetation, but in‐sediment anaerobic CH 4 oxidation cannot be ruled out as an alternative cause. The observed patterns, however, are not consistent across the lakes. Neither do they correspond to the spatiotemporal variations in the measured bubble CH 4 fluxes. Patterns of acetoclastic and hydrogenotrophic production plus oxidation demonstrate that gains and losses of sediment CH 4 are dominated by sub‐lake scale processes. The δD‐CH 4 in the bubbles was significantly different depending on measurement month, likely due to evaporation effects. On a larger scale, our isotopic data, combined with those from other lakes, show a significant difference in bubble δD‐CH 4 between postglacial and thermokarst lakes, an important result for emission inventories. Although this characteristic theoretically assists in source partitioning studies, most hypothetical future shifts in δD‐CH 4 due to high‐latitude lake area or production pathway are too small to lead to atmospheric changes detectable with current technology.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

The Relationship Between Topography, Bedrock Weathering, and Water Storage Across a Sequence of Ridges and Valleys

Abstract Bedrock weathering regulates nutrient mobilization, water storage, and soil production. Relative to the mobile soil layer, little is known about the relationship between topography and bedrock weathering. Here, we identify a common pattern of weathering and water storage across a sequence of three ridges and valleys in the sedimentary Great Valley Sequence in Northern California that share a tectonic and climate history. Deep drilling, downhole logging, and characterization of chemistry and porosity reveal two weathering fronts. The shallower front is ∼7 m deep at the ridge of all three hillslopes, and marks the extent of pervasive fracturing and oxidation of pyrite and organic carbon. A deeper weathering front marks the extent of open fractures and discoloration. This front is 11 m deep under two ridges of similar ridge‐valley spacing, but 17.5 m deep under a ridge with nearly twice the ridge‐valley spacing. Hence, at ridge tops, the fraction of the hillslope relief that is weathered scales with hillslope length. In all three hillslopes, below this second weathering front, closed fractures and unweathered bedrock extend about one‐half the hilltop elevation above the adjacent channels. Neutron probe surveys reveal that seasonally dynamic moisture is stored to approximately the same depth as the shallow weathering front. Under the channels that bound our study hillslopes, the two weathering fronts coincide and occur within centimeters of the ground surface. Our findings provide evidence for feedbacks between erosion and weathering in mountainous landscapes that result in systematic subsurface structuring and water routing.

58 GEOSCIENCES↗
DOE OSTI2021

Temporal, Spatial, and Temperature Controls on Organic Carbon Mineralization and Methanogenesis in Arctic High-Centered Polygon Soils

Warming temperatures in continuous permafrost zones of the Arctic will alter both hydrological and geochemical soil conditions, which are strongly linked with heterotrophic microbial carbon (C) cycling. Heterogeneous permafrost landscapes are often dominated by polygonal features formed by expanding ice wedges: water accumulates in low centered polygons (LCPs), and water drains outward to surrounding troughs in high centered polygons (HCPs). These geospatial differences in hydrology cause gradients in biogeochemistry, soil C storage potential, and thermal properties. Presently, data quantifying carbon dioxide (CO 2 ) and methane (CH 4 ) release from HCP soils are needed to support modeling and evaluation of warming-induced CO 2 and CH 4 fluxes from tundra soils. This study quantifies the distribution of microbial CO 2 and CH 4 release in HCPs over a range of temperatures and draws comparisons to previous LCP studies. Arctic tundra soils were initially characterized for geochemical and hydraulic properties. Laboratory incubations at −2, +4, and +8°C were used to quantify temporal trends in CO 2 and CH 4 production from homogenized active layer organic and mineral soils in HCP centers and troughs, and methanogen abundance was estimated from mcrA gene measurements. Results showed that soil water availability, organic C, and redox conditions influence temporal dynamics and magnitude of gas production from HCP active layer soils during warming. At early incubation times (2–9 days), higher CO 2 emissions were observed from HCP trough soils than from HCP center soils, but increased CO 2 production occurred in center soils at later times (>20 days). HCP center soils did not support methanogenesis, but CH 4 -producing trough soils did indicate methanogen presence. Consistent with previous LCP studies, HCP organic soils showed increased CO 2 and CH 4 production with elevated water content, but HCP trough mineral soils produced more CH 4 than LCP mineral soils. HCP mineral soils also released substantial CO 2 but did not show a strong trend in CO 2 and CH 4 release with water content. Knowledge of temporal and spatial variability in microbial C mineralization rates of Arctic soils in response to warming are key to constraining uncertainties in predictive climate models.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Quantifying Subsurface Biogeochemical Variability in a High Altitude Watershed During Winter Isolation

Shallow subsurface microbial and geochemical processes in watersheds are dynamic and responsive to seasonal and long-term environmental change. At high elevation or latitude, such changes may occur during winter months when normal sampling is impossible, impractical, unsafe, or may actually alter the processes being studied. Yet accurate modeling of biogeochemical parameters in these environments requires sampling that can capture events and persistent cold climate trends. Gaps in current models exist where data have not been collected during extended snow- or ice-covered periods. The goals of our exploratory study were to examine the biogeochemical processes occurring in a well-studied high altitude watershed during winter when the system is largely inaccessible. We tested the hypothesis that during snow cover in the East River (ER) watershed, episodic excursions of microbial community structure and biogeochemical processes and concentrations fluctuated from values extrapolated from pre- and post-snow time periods. Through our research we identified previously unresolved subsurface-surface transport phenomena and a heretofore under-appreciated methane cycle occurring during wintertime months, thus providing valuable insight into watershed processes. Our research showed that autonomous sampling techniques, first used in marine systems, is extremely versatile and can be adapted for use in harsh continental settings to examine temporal changes in freshwater chemistry and microbial community assemblage. Further, we found that by sampling during periods when systems are hard to access, will lend insight and better accountability for global budgets for methane, an important greenhouse gas. By strengthening our knowledge of wintertime biogeochemical relationships in high altitude watersheds our research leads to more complete descriptions of cryptic processes and ultimately will inform and improve the reactive transport models that simulate processes in these systems.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Performance assessment of a real water source heat pump within a hardware-in-the-loop (HIL) testing environment

Over the last decade, the global fight against climate change through electrification has led to an increase in research on building heating, ventilation, and air conditioning (HVAC) systems that utilize intelligent control algorithms to provide demand-side grid service while also maintaining the thermal comfort of building occupants. As the pivotal point between building electricity consumption and indoor thermal comfort, high-efficiency electrical vapor-compression heat pumps are at the center of these emerging studies, and various grid-interactive and occupant-comfort control algorithms have been developed for them. The impact of these algorithms on heat pump operation and performance when subjected to different weather conditions, building loads, and grid requests calls for investigation and verification via experimental testing with actual heat pumps integrated with real-time building and grid responses. This study introduces a Water-Source Heat Pump (WSHP) Hardware-in-The-Loop (HIL) Test Facility that is the first of its kind. This testbed utilizes a 2-ton variable speed water-to-air heat pump that is capable of interacting with a virtual environment currently comprised of an EnergyPlus (E+) building simulation, an agent-based occupant behavioral model, and a single U-tube ground-loop heat exchanger (GLHE) model. Detailed descriptions of the testbed’s physical design and operation, virtual environment, as well as their mutual communication is provided. An uncertainty analysis is also performed under manufacturer specified heating and cooling design conditions. This analysis shows that the total load across the WSHP’s demand side heat exchanger, i.e., the sum of its latent and sensible components, can be measured with a relative uncertainty of ± 10.4% and ± 3.6% in cooling and heating mode respectively. The WSHP’s coefficient of performance (COP) can be measured with relative uncertainties of ± 10.4% in cooling mode, and ± 3.7% in heating mode. A preliminary 24-h experimental demonstration is then performed utilizing the DOE prototype small commercial office building model in E+. The simulation takes place in Atlanta, GA on the date of 08/26/15 from 12:00 AM to 11:59 PM using TMY3 weather data. Here, the results from this demonstration show that over the course of this experiment the simulated outputs of zone dry-bulb temperature, zone humidity ratio, and WSHP inlet water temperature can be tracked by testbed emulators up to a root mean squared error (RMSE) of ± 0.27 °C, ± 0.376 g/kg, and ± 0.85 °C respectively. The WSHP’s dynamic behavioral characteristics and performance are also captured, and correspond well with the authors’ previous understanding of heat pump efficiency as a function of evaporator and condenser fluid inlet conditions respectively.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

CERF: IM3 Projected Western US Power Plant Locations

Overview The Capacity Expansion Regional Feasibility (CERF) model is an open-source geospatial python package that provides new power plant locations at a 1km resolution. The model ingests U.S. state or regional-scale electricity system capacity expansion plans, such as those produced by the Global Change Analysis Model (GCAM-USA), and identifies feasible, site-specific locations for individual new power plants (renewable and non-renewable). CERF combines high-resolution geospatial suitability analyses with an economic algorithm that selects individual plant siting locations based on grid interconnection costs and the locational marginal value of new generation. The model incorporates a wide range of dynamic constraints and opportunities, such as protected lands, population density, existing infrastructure, and water availability. This dataset provides CERF power plant siting results for IM3 Phase 2 simulations across eight different scenarios for the Western US through 2055. The scenarios include combinations of two Shared Socioeconomic Pathways (SSP3 and SSP5) with four high-resolution climate projections specific to the United States (see, https://tgw-data.msdlive.org/). These climate projections include "hotter" and "cooler" variants for two Representative Concentration Pathways (RCP4.5 and RCP8.5). The resulting eight simulations are: rcp45cooler_ssp3 rcp45cooler_ssp5 rcp45hotter_ssp3 rcp45hotter_ssp5 rcp85cooler_ssp3 rcp85cooler_ssp5 rcp85hotter_ssp3 rcp85hotter_ssp5 CERF siting results in this dataset correspond to capacity expansion plans in the GCAM-USA IM3 Phase 2 simulation data and are available for each of the above scenarios. Data Details Temporal Range: 2015-2055 in 5-year timesteps. Note that 2015 is the experiment base year and 2020 and beyond represent model simulation years. Spatial Range: Plant locations are provided for the eleven states in the Western US including Arizona, California, Colorado, Idaho, Montana, New Mexico, Nevada, Oregon, Utah, Washington, and Wyoming. Spatial Resolution: 1 km-squared, provided in x and y coordinates Geospatial Projection: Albers Equal Area Conic (ESRI:102003) File Type: csv The dataset contains subdirectories for each of the eight scenarios described in the overview. Each scenario folder contains two subfolders with the following information: 1. Power Plant Data This directory contains a single .csv file of power plant locations for both pre-existing (non-CERF sited plants in operation in 2015) and new (CERF-sited) power plants across the temporal range along with additional CERF model output parameters for CERF-sited plants. Plant with a siting year earlier than 2020 correspond to facilities that are operational leading into the first timestep CERF simulation. For a more detailed description of CERF model output parameters, see the CERF model documentation. Note that the cerf_plant_id parameter is unique within each scenario file but not across scenario files. Parameter Descriptions scenario - Name of scenario cerf_plant_id - Unique siting identifier cerf_sited - If True, indicates that plant was sited by CERF model. If False, indicates pre-existing facility region_name - Name of region (state) tech_id - Technology ID tech_name - Full generation technology name inclusive of cooling type (if applicable) and additional characteristics tech_simple - Simplified generation technology type unit_size_mw - Power plant unit size (MW) xcoord - X coordinate in the default CRS (meters) ycoord - Y coordinate in the default CRS (meters) index - Index position in the flattend 2D array buffer_in_km - Exclusion buffer around site (km) sited_year - Year of siting retirement_year - Year of retirement lmp_zone - Locational marginal price (LMP) zone ID locational_marginal_price_usd_per_mwh - Locational marginal price ($/MWh) generation_mwh_per_year - Generation output (MWh/yr) operating_cost_usd_per_year - Cost of plant operations ($/yr) net_operational_value - Net operational value based on LMP and and operating costs ($/yr) interconnection_cost - Cost of interconnection for transmission & gas pipeline (if applicable) net_locational_cost -- Difference of interconnection cost and operating value ($/yr) capacity_factor_fraction - Capacity factor (fraction) carbon_capture_rate_fraction - Carbon capture rate (fraction) fuel_co2_content_tons_per_btu - Fuel CO2 content (tons/Btu) fuel_price_usd_per_mmbtu - Fuel price ($/MMBtu) fuel_price_esc_rate_fraction - Fuel price escalation rate (fraction) heat_rate_btu_per_kWh - Heat rate (Btu/kWh) lifetime_yrs - Technology lifetime for annuity (years) operational_life_yrs - Operational lifetime for retirement (years) variable_om_usd_per_mwh - Variable operation and maintenance costs of yearly capacity use ($/MWh) variable_om_esc_rate_fraction - Variable operation and maintenance costs escalation rate (fraction) carbon_tax_usd_per_ton - Carbon tax ($/ton) carbon_tax_esc_rate_fraction - Carbon tax escalation rate (fraction) 2. Storage Data This directory contains information on new and pre-existing energy storage facilities operational in each timestep along with various storage operational parameters. The 2015 timestep provides pre-existing energy storage data and corresponds with facilities that are operational leading into the first model simulation timestep. Note that coordinates in the storage files correspond to the interconnection point on the grid (substation location), not individual energy storage locations. Energy storage is added in a cumulative process at each given interconnection point. That is, each individual file provides the total operational storage capacity interconnected to the specified substation for the given timestep, inclusive of previously installed storage at that location and new storage installed in that timestep at that location. Parameters scenario - Name of scenario timestep - Simulation timestep name - Unique storage identifier s_typ - Type of energy storage technology (battery or pumped storage hydro) s_node - Node ID of interconnecting substation xcoord - X coordinate in the default CRS (meters) ycoord - Y coordinate in the default CRS (meters) charge_rate - Maximum charge rate (power capacity) of storage system (MW) discharge_rate - Maximum discharge rate (power capacity) of storage system (MW) duration - Duration of storage system (hours) max_SoC - Allowed maximum state of charge (energy capacity) of storage system (MWh) min_SoC -Allowed minimum state of charge (energy capacity) of storage system (MWh) charge_eff - Efficiency of charge (fraction between 0 and 1) discharge_eff - Efficiency of discharge (fraction between 0 and 1) Acknowledgment IM3 is a multi-institutional effort led by Pacific Northwest National Laboratory and supported by the U.S. Department of Energy's Office of Science as part of research in MultiSector Dynamics, Earth and Environmental Systems Modeling Program.

CERF↗
DOE OSTI2025

A Scale‐Adaptive Urban Hydrologic Framework: Incorporating Network‐Level Storm Drainage Pipes Representation

Abstract Below‐ground urban stormwater networks (BUSNs) significantly influence urban flood dynamics, yet their representation at the watershed or larger scales remains challenging. We introduce a scalable urban hydrologic framework that centers on a novel network‐level BUSN representation, balancing the needs for physical basis, parameter parsimony, and computational efficiency. Our framework conceptualizes an urban watershed into four interacting zones: hillslopes (natural), storm‐sewersheds (urban), a sub‐network channel (tributaries), and a main channel. We develop an innovative Graph Theory‐based algorithm to derive network‐level BUSN parameters from publicly available datasets, enabling efficient, scalable parameterization. We demonstrate this framework's applicability at nine representative watersheds in the Houston metropolitan region, USA, with urban imperviousness ranging from 0% to 64% and drainage areas ranging from 24 to 302 . Our model achieves satisfying computational efficiency, completing hourly time step simulations for 18 years in less than 5 sec per watershed on a standard PC. Validation against observed daily streamflow confirms that the model can capture small‐to‐large flood peaks and seasonal and annual water balance over these watersheds. Comparisons with the National Water Model show better performance in predicting flood peaks and overall water balance, underscoring the promises of our new framework for urban hydrologic modeling at large scales. Furthermore, analysis reveals nonlinear relationships between BUSNs' designed capacities and flood reduction effects. Our approach bridges the gap between detailed hydraulic and large‐scale hydrologic models, providing a valuable tool for urban flood prediction and management across broader spatial and temporal scales.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Forced and Unforced Decadal Behavior of the Interhemispheric SST Contrast during the Instrumental Period (1881–2012): Contextualizing the Late 1960s–Early 1970s Shift

The sea surface temperature (SST) contrast between the Northern Hemisphere (NH) and Southern Hemisphere (SH) influences the location of the intertropical convergence zone (ITCZ) and the intensity of the monsoon systems. This study examines the contributions of external forcing and unforced internal variability to the interhemispheric SST contrast in HadSST3 and ERSSTv5 observations, and 10 models from phase 5 of the Coupled Model Intercomparison Project (CMIP5) from 1881 to 2012. Using multimodel mean fingerprints, a significant influence of anthropogenic, but not natural, forcing is detected in the interhemispheric SST contrast, with the observed response larger than that of the model mean in ERSSTv5. The forced response consists of asymmetric NH–SH SST cooling from the mid-twentieth century to around 1980, followed by opposite NH–SH SST warming. The remaining best-estimate residual or unforced component is marked by NH–SH SST maxima in the 1930s and mid-1960s, and a rapid NH–SH SST decrease around 1970. Examination of decadal shifts in the observed interhemispheric SST contrast highlights the shift around 1970 as the most prominent from 1881 to 2012. Both NH and SH SST variability contributed to the shift, which appears not to be attributable to external forcings. Most models examined fail to capture such large-magnitude shifts in their control simulations, although some models with high interhemispheric SST variability are able to produce them. Large-magnitude shifts produced by the control simulations feature disparate spatial SST patterns, some of which are consistent with changes typically associated with the Atlantic meridional overturning circulation (AMOC).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Thermodynamics of Minerals Stable near Earth's Surface

Project “Thermodynamics of Minerals Stable Near the Earth’s Surface” uses specialized calorimetric techniques to obtain new thermochemical data for solid phases of interest in the Earth’s “critical zone”, the near surface regions of the planet most directly affecting and affected by human activity. Major activity was in three areas: manganese oxide materials, aluminum clusters which are precursors to aluminum oxyhydroxide precipitates, and zeolites. All these classes of minerals are potential carriers of heavy metals and radionuclides in the environment, both within their crystal structures and as adsorbed layers or colloids. Their thermodynamic stability, as well as the sequence of stability of competing phases, governs the aqueous solubility of contaminants (and nutrients) in soil, groundwater, and sediments. The thermodynamics of these phases is strongly affected by particle size and crystallinity, since they often occur as very fine particles which do not coarsen in the near-surface environment. Many of these materials exhibit extensive polymorphism, multicomponent solid solution, and variable hydration states. Thus, one must define and systematize important thermodynamic variables, since one cannot make measurements on each and every possible phase, particle size, and composition. A major finding of the work on manganese oxides was labile water-induced oxidation-reduction reactions. These will be studied further by a combination of thermodynamic and synchrotron-based spectroscopic methods, the latter in collaboration with Peggy O’Day at UC Merced. The adsorption of other species, including simple organics, on such redox-active surfaces will also be investigated by a combination of thermochemical and spectroscopic studies. Studies of the energetics of water adsorption on mineral surfaces will be expanded to emphasize the adsorption of CO2 and small organic molecules, relevant to soil, groundwater, and the subsurface environment. Gas adsorption calorimetry, immersion calorimetry, and solution calorimetry will be combined with appropriate analytical and spectroscopic techniques to obtain a comprehensive picture of the interactions and their energetics. The evolution of aqueous aluminum clusters to form aluminum oxyhydroxide precipitates will be studied in detail by a combination of calorimetric and structural methods applied to aqueous samples aged at room temperature. The energetics of new classes of clusters will be explored. The project addresses several common themes relevant to the broad mission of the Department of Energy. Thermochemical data for minerals stable near the Earth’s surface, though still incomplete, are essential for understanding both natural and anthropogenic processes that affect our very existence on this planet. Such data contribute to the fundamental underpinning for mitigation and management strategies for the extraction and use of energy. Fundamental thermodynamic and mechanistic understanding is required to model processes ranging from heavy metal pollution to nuclear waste disposal to climate change.

58 GEOSCIENCES↗
DOE OSTI2024

Aircraft Measurements from a U.S. Western Wildfire Demonstrating Day and Night Differences in the Chemical Composition and Optical Properties of Biomass Burning Aerosols and Their Atmospheric Evolution

The composition and transformations of biomass burning aerosols (BBA) have been measured onboard the NOAA Twin Otter research aircraft during the Fire Influence on Regional to Global Environments and Air Quality field study. Here, we analyze real-time aerosol mass spectrometry measurements across three flights during the afternoon, late afternoon, and night of August 28, 2019, for one midsized wildfire. Analysis of several metrics showed that the aerosol composition and optical properties varied depending on the burning conditions at the fire zone and the time of day the BBA was emitted, with substantial variations in the available sunlight. The total aerosol mass loadings were dominated by organic components with a much smaller contribution from inorganic species. A gradual buildup of organic material was observed during the afternoon as the plume aged, indicating the condensation of photochemically formed low-volatility oxidized organic compounds. Highly hygroscopic ammonium nitrate was the main inorganic component, suggesting potential water content in BBA particles and the likelihood of their aqueous-phase reactivity. Depletions of particle-phase NO 3 – and Cl – relative to carbon monoxide were observed in the late afternoon and nighttime plumes, respectively, aligning with known gas-particle partitioning thermodynamics and the heterogeneous chemistry of dissolved nitrate and chloride. The wavelength-dependent light absorption by aerosol species was higher for the plume sampled at night and showed no significant changes with plume age, despite observed trends in composition and mass downwind. These differences in particle composition and optical properties demonstrate that the processes involved in BBA aging are not uniform for the same wildfire over the course of the day and depend highly on when the BBA was emitted, as well as the burning phase at the emissions source.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Identifying recharge sources and their impacts on a North Central New Mexico shallow aquifer using unsupervised machine learning

In this article, shallow aquifers are important but highly variable resources in arid to semi-arid regions. Limited shallow aquifer volume results in high sensitivity to recharge fluctuations, which can impact the local fauna and flora, and transport of contaminants in the aquifer or vadose zone. Aquifer response to external forcing (e.g., precipitation) is usually solved by estimating aquifer parameters and running physics-based models to match known fluctuations of hydraulic head. However, this technique is time and computationally expensive. Furthermore, high aquifer complexity decreases precision in physics-based models. Alternatively supervised machine learning is used to predict aquifer dynamics. However, these techniques rely on input data and struggle to interpret aquifer response for missing sources (i.e., snowpack data). To counter these problems, we propose an unsupervised machine learning technique (NMFk) to estimate the impact of different sources on aquifer recharge. NMFk is used to understand the influence of external forcing on shallow aquifer recharge in the Pajarito Plateau (Los Alamos, NM, USA). The results show how NMFk can be used to reduce the data dimension in a complex field dataset to three recharge signals that cause fluctuations within the field data. Here, the source signals are interpreted as rainfall, snowmelt, and a delayed aquifer response to the previous two signals. These results evidence how heterogeneous aquifers delimited by canyons incised into the Pajarito Plateau respond in similar ways to the source signals identified by NMFk. Furthermore, results show the importance of the local geology where faults act as sinks, and anthropogenic disturbances can facilitate infiltration amplifying the interpreted signal.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

WHONDRS Surface Water Dissolved Organic Carbon and FTICR-MS across Glacial Features in Svalbard 2022

This dataset supports a broader study examining climatic forcing of terrestrial greenhouse gas emission through permafrost and glaciers in Svalbard. The dataset provides geochemistry and organic matter characterization data generated from surface water collected from 11 sites across central Svalbard. Data were also collected in 2021 and can be found at https://data.ess-dive.lbl.gov/view/doi:10.15485/1888571. Additional related data were collected and will be published separately in collaboration with Yde and Kleber.This dataset is comprised of one main data folder containing (1) file-level metadata; (2) data dictionary; (3) field metadata; (4) dissolved organic carbon (DOC; measured as non-purgeable organic carbon; NPOC); (5) surface water sampling protocol; (6) readme; (7) methods codes; (8) international geo-sample number (IGSN) mapping file; (9) a folder of field photos; and (10) folder of high resolution characterization of organic matter via 7 Tesla Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) generated through the Environmental Molecular Sciences Laboratory (EMSL; https://www.pnnl.gov/environmental-molecular-sciences-laboratory). The FTICR folder contains two subfolders, one containing the .xml data files and the other containing instructions for using Formularity (https://omics.pnl.gov/software/formularity) and an R script to process the data based on the user's specific needs. All files are .csv, .pdf, .R, .ref, or .xml.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Data for: Climatic Imprint on Interfacially-Controlled Platinum-Palladium Resources

Data package for manuscript "Climatic Imprint on Interfacially-Controlled Platinum-Palladium Resources" by Emily G. Wright, Ivey Wang, Yihang Fang, Elaine D. Flynn, and Jeffrey G. Catalano. This dataset contains adsorption results from experiments designed to investigate the effect of chloride on Pd(II) adsorption to goethite and Pt(II) adsorption to hematite and goethite, including lab experiments, X-ray absorption fine structure spectroscopy, and models of retention within a laterite. See the associated manuscript for full methods information. The file "Wright2025_PtAds_data.csv" contains the target starting Pt concentration (uM), final aqueous Pt and associated error (in uM), calculated adsorbed Pt and associated error (in umol/m2), target and measured aqueous chloride (mM), target aqueous nitrate (mM), final pH, and mineral concentration/loading (g/L). Associated mineral-free controls (mineral loading = 0 g/L) are included; the aqueous Pd error was not calculated and chloride was not measured in every sample. These data appear in Figures 1, S3, S4, S5, S20, and S22 in the associated manuscript. The file "Wright2025_PdAds_data.csv" contains the target starting Pd concentration (uM), final aqueous Pd and associated error (in uM), calculated adsorbed Pd and associated error (in umol/m2), target and measured aqueous chloride (mM), and mineral concentration/loading (g/L). Associated mineral-free controls (mineral loading = 0 g/L) are included; the aqueous Pd error was not calculated and chloride was not measured in every sample. These data appear in Figures 1, S3, S4, S5, and S20 in the associated manuscript. The file "Wright2025_MineralBatches_data.csv" contains the mineral identity and BET specific surface area (m2/g) for every mineral batch synthesized and used in experiments. The annealing time used is listed for hydrothermally annealed goethite. These data appear in Table S2 in the associated manuscript. The file "Wright2025_XRD_data.csv" contains the XRD patterns for every mineral batch synthesized as the counts as a function of two theta (in degrees). See "Wright2025_MineralBatches_data.csv" for more details on specific mineral batches. These data appear in Figure S2 in the associated manuscript. The file "Wright 2025_ZetaPotential_data.csv" contains the measured zeta potentials for samples of goethite (batch G2) at pH 4 the presence of varying amounts of sodium chloride. These data appear in Table S3 in the associated manuscript. The file "Wright2025_XAFSSamples_data.csv" contains the specific mineral batch, measured final aqueous Pd or Pt (uM), measured final aqueous chloride (mM), and estimated adsorbed Pd or Pt (umol/m2) of all XAFS samples. These data appear in Tables S4, S7, S8, and S10 in the associated manuscript. The files "Wright2025_PdXAFS_data.csv" and "Wright2025_PtXAFS_data.csv" contain the normalized spectra of Pd and Pt, respectively, adsorbed to minerals at varying chloride concentrations. See "Wright2025_XAFSSamples_data.csv" for a guide to sample names. Note that "05" in a sample name is equivalent to "0.5". These data appear in Figures 2, S6, S7, S8, S12, S13, and S14 in the associated manuscript. The file "Wright2025_LateriteProfileProfileModelParameters_data.csv" include the ratio of hematite to hematite and goethite in two synthetic, modeled profiles, as well as the modeled surface areas of goethite and hematite as a function of relative depth within the modeled weathering zone. These data were used, in conjunction with equations presented in the paper, to calculate the theoretical concentrations of Pd and Pt (and the resulting Pt/Pd ratio) within the profiles. These data appear in Figure 3 in the associated manuscript. The file "Wright2025_Imagery_data.zip" is a zipped folder containing the TEM and STEM images appear in Figures S18 and S19. Individual files are labeled as either STEM (Fig. S18) or TEM (Fig. S19) with a letter representing the part of the multipart figure.

58 GEOSCIENCES↗
DOE OSTI2024

How Rains and Floods Become Groundwater: Understanding Recharge Pathways With Stable and Cosmogenic Isotopes

Anthropogenic climate change leads to increased precipitation intensity and exacerbated droughts in California, challenging the reliability and drought resiliency of water supply. Storing floodwater underground via managed aquifer recharge can mitigate these effects through direct infiltration or streambed infiltration. Seasonally dry streams (arroyos) already play an important part in managing groundwater recharge to the Livermore basin (CA). Understanding how, when and where stormwater and arroyo water infiltrate is critical to effectively utilise this strategy. To track water from recent storms (water year 2022–2023, WY23) into the Livermore Valley Groundwater Basin, we analysed stable water isotopes (δ 18 O and δ 2 H) in combination with naturally occurring radioactive isotopic tracers, sulphur-35 ( 35 S, t ½ = 87 days) and tritium ( 3 H, t ½ = 12.3 years). By comparing measurements of δ 18 O, 35 S and 3 H in arroyos to precipitation and groundwater, we classified the relative age and identified source of recharge to 16 wells near two arroyos. Two wells contained water with recent recharge (from WY23) from local precipitation. One well had recent recharge from variable (precipitation and imported water) sources. One well contained imported water recharge. Three wells contained water from mixed recent and older (pre-WY23) waters, from local precipitation sources. Two wells contained recent recharge from local mine settling ponds. Seven wells had older recharge from local precipitation sources. This combination of isotopes allows us to delineate where local and imported water recharges in this highly managed basin and identify locations where managed aquifer recharge is contributing to rapid groundwater infiltration. Our combined interpretation of isotopic water ages and sources in the context of land use shows that local infiltration of precipitation in open spaces is an important recharge mechanism, in addition to the managed arroyo recharge. Finally, a broader familiarity with 35 S will enable more extensive research on the infiltration of urban floodwaters.

58 GEOSCIENCES↗
DOE OSTI2022

Role of copper in nitrous oxide accumulation in wetland soils from Illinois and South Carolina and stream sediments from Tennessee

Denitrification is microbially-mediated through enzymes containing metal cofactors. Laboratory studies of pure cultures have highlighted that the availability of copper (Cu), required for the multicopper enzyme nitrous oxide reductase, can limit nitrous oxide (N2O) reduction. However, in natural aquatic systems, such as wetlands and hyporheic zones in stream beds, the role of Cu in controlling denitrification remains incompletely understood. In this study, we collected soils and sediments from three natural environments -- riparian wetlands, marsh wetlands, and a stream -- to investigate their nitrogen species transformation activity at background Cu levels and different supplemented Cu loadings. All of the systems contained solid-phase associated Cu below or around geological levels (40–280 nmol g-1) and exhibited low dissolved Cu (3–50 nM), which made them appropriate sites for evaluating the effect of limited Cu availability on denitrification.The dataset contains the variation in the nutrient (nitrate (NO3-), nitrite (NO2-), and ammonium (NH4+)) and N2O concentrations during the incubation experiments to evaluate the effect of Cu. We have also reported the variation in metal concentrations (Cu, iron(Fe) and manganese (Mn)) and dissolved organic carbon (DOC) concentrations during the incubations. The parameters obtained using a kinetic model to quantitatively report the effect of Cu on nitrogen species conversion in natural aquatic systems are also added in the dataset. The dataset also contains the labile concentration of Cu estimated using a speciation model in MINTEQ. All data are provided in text-based CSV format with header sections indicating the data contained in each file and the corresponding units.Our study suggests that high concentrations of N2O accumulated in all microcosms lacking Cu amendment except for one stream sediment sample. With Cu added to provide dissolved concentrations at trace levels (10–300 nM), the reduction rate of N2O to N2 in the wetland soils and stream sediments was enhanced. A kinetic model could account for the trends in nitrogen species by combining the reactions for microbial reduction of NO3- to NO2-/N2O/N2 and abiotic reduction of NO2 to nitrogen (N2_. The model revealed that the rate of N2O to N2 conversion increased significantly in the presence of Cu. For riparian wetland soils and stream sediments, the kinetic model also suggested that overall denitrification is driven by abiotic reduction of NO2- in the presence of inorganic electron donors. This study demonstrated that natural aquatic systems containing Cu at concentrations less than or equal to crustal abundances may display incomplete reduction of N2O to N2 that would cause N2O accumulation and release to the atmosphere.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Biogeochemistry simulations for the Salt Marsh Accretion Response to Temperature eXperiment (SMARTX)

Coastal ecosystems have been largely ignored in Earth system models but are important zones for carbon and nutrient processing. Interactions between water, microbes, soil, sediments, and vegetation are important for mechanistic representation of coastal processes and ecosystem function. To investigate the role of these feedbacks, we used a reactive transport model (PFLOTRAN) that has the capability to be connected to the Energy Exascale Earth System Model (E3SM). PFLOTRAN was used to incorporate redox reactions and track chemical species important for coastal ecosystems as well as define simple representations of vegetation dynamics. Our goal was to incorporate oxygen flux, salinity, pH, sulfur cycling, and methane production along with plant-mediated transport of gases and tidal flux. Using porewater profile and incubation data for model calibration and evaluation, we were able to create depth-resolved biogeochemical soil profiles for saltmarsh habitat and use this updated representation to simulate direct and indirect effects of elevated CO2 and temperature on subsurface biogeochemical cycling. We found that simply changing the partial pressure of CO2 or increasing temperature in the model did not fully reproduce observed changes in the porewater profile, but the inclusion of plant or microbial responses to CO2 and temperature manipulations was more accurate in representing porewater concentrations. This indicates the importance of characterizing tightly coupled vegetation-subsurface processes for developing predictive understanding and the need for measurement of plant-soil interactions on the same time scale to understand how hotspots or moments are generated.Included in this data package are PFLOTRAN input (PFLOTRAN input files and chemical database) files for simulating single column biogeochemistry, root, and tide interactions at the Global Change Research Wetland (Kirkpatrick Marsh; Edgewater, MD). The biogeochemical network includes soil organic matter decomposition, nitrogen, iron, and sulfur cycling, and methanogenesis. Reduced species can be oxidized and plant processes include oxygen and nutrient priming, methane release, and nutrient uptake.Inputs:TAI_database.dat - geochemical database for reactions, more information on database structure and variables can be found here https://www.pflotran.org/documentation/user_guide/cards/pages/geochemical_database.htmlswamp.in - input file for biogeochemical network in PFLOTRANswamp_eCO2.in - input file for biogeochemical network in PFLOTRAN with input gas partial pressures/concentrations adjusted for elevated CO2 treatmentsOutputs:swamp_obs_0.tec - hourly porewater concentrations from from multiple depths in the soil columnswamp_eCO2_obs_0.tec - hourly porewater concentrations from multiple depths in the soil column for elevated CO2 treatmentsPFLOTRAN code access: https://github.com/fmyuan/pflotran-elm-interface.git

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Data and scripts associated with “Moisture content modulates DOM thermodynamic regulation of oxygen consumption in drying streambed sediments”

This data package is associated with the publication “Moisture content modulates DOM thermodynamic regulation of oxygen consumption in drying streambed sediments” published in Scientific Reports (Garayburu-Caruso et al., 2026). The package contains processed data products and scripts used to quantify how drying and re-inundation of riverbed sediments influence dissolved organic matter (DOM) thermodynamic properties and their relationship with sediment oxygen (O₂) consumption across 33 stream sites in the contiguous United States. The data package contains DOM thermodynamic metrics (e.g., Gibbs free energy of carbon oxidation and thermodynamic efficiency), and O₂ consumption along with watershed-scale climate and land-cover metrics used as explanatory variables in the analyses. Underlying unprocessed and processed ultrahigh-resolution mass spectrometry data, oxygen consumption rates from laboratory moisture-manipulation experiments, within-sample environmental properties, sediment moisture content and contextual field measurements are archived separately at https://data.ess-dive.lbl.gov/datasets/doi:10.15485/2428003 (Laan et al., 2024) and https://data.ess-dive.lbl.gov/datasets/doi:10.15485/1923689 (Forbes et al.,2023). A preliminary version of this data package was published in February 2026 at the time of manuscript submission. It was updated in June 2026, at the time of manuscript acceptance, to include the finalized data and additional metadata (readme, data dictionary, and file level metadata). For details on how to navigate data packages generated by this project, see https://data.ess-dive.lbl.gov/portals/PNNLRiverCorridorSFA/About. In addition to a readme, this data package also includes a file-level metadata (FLMD) file that describes each file and a data dictionary (DD) that describes all column/row headers and variable definitions. At the top level, the data package is organized into five main folders: (1) Data, (2)Figures, (3) Map, (4) GAM_Reulsts, and (5) src. The Data folder contains analysis-ready tabular files with oxygen consumption rates, DOM thermodynamic properties by site and treatment, site-level environmental variables, watershed-scale metrics, and other derived variables referenced in the manuscript. The Figures folder contains static image files associated with the main text and supplemental figures, while the Map folder includes spatial data and map-layer files used to create the sampling-location map. The GAM results folder contains the results for each of the general additive model (GAM).The src folder contains R scripts used to perform data processing, statistical analyses (including clustering, generalized additive models, and threshold analysis), and figure generation. This data package is associated with a GitHub repository found at https://github.com/WHONDRS-Hub/ECA_DOM_Thermodynamics.

Dissolved organic matter↗