Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Camber”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRS1958

Compilation of Information on the Transonic Attachment of Flows at the Leading Edges of Airfoils

Schlieren photographs have been compiled of the two-dimensional flow at transonic speeds past 37 airfoils. These airfoils have variously shaped profiles, and some are related in thickness and camber. The data for these airfoils were analyzed to provide basic information on the flow changes involved and to determine factors affecting transonic-flow attachment, which is a transition from separated to unseparated flow at the leading edges of two-dimensional airfoils at fixed angles as the subsonic Mach number is increased.

FLOW, MIXED↗
NASA NTRS1925

Results of recent experiments with slotted wings

This report gives the results of a recent series of experiments performed on a wing designed for a cantilever monoplane. Both wings were trapezial in their ground plan, with their tips rounded elliptically. These wing sections combine all known devices for increasing the lift, namely, the slot, the increased camber and angle of attack by means of an aileron running the whole length of the span. The last advance included in the wing section was an increase in wing area by means of an auxiliary wing adjusted by a sort of rectangular joint.

BOUNDARY LAYER THICKNESS↗
NASA NTRS1925

Air forces on airfoils moving faster than sound

We are undertaking the task of computing the air forces on a slightly cambered airfoil in the absence of friction and with an infinite aspect ratio. We also assume in advance that the leading edge is very sharp and that its tangent lies in the direction of motion.

AIRFOILS, HIGH SPEED↗
NASA NTRS1953

Method of Estimating the Incompressible-flow Pressure Distribution of Compressor Blade Sections at Design Angle of Attack

A method was devised for estimating the incompressible-flow pressure distribution over compressor blade sections at design angle of attack. The theoretical incremental velocities due to camber and thickness of the section as an isolated airfoil are assumed proportional to the average passage velocity and are modified by empirically determined interference factors. Comparisons were made between estimated and test pressure distributions of NACA 65-series sections for typical conditions. Good agreement was obtained.

COMPRESSOR FLOW THEORY AND EXPERIMENT↗
NASA NTRS1927

Flap Gear for Airplanes : A New Scheme in Which Variation is Automatic

A variable flap gear, which would function automatically and require no attention during flight appeared to be an attractive idea even in its early stages of development. The advantages of variable camber are described as well as the designs of these automatic flaps.

WING FLAPS, AUTOMATIC↗
NASA NTRS1927

Drag measurements of two thin wing sections at different index values

It is stated that the index value 6000, as found in normal tests of wing sections with a 20 cm chord, falls in the same region where the transition of laminar to turbulent flow takes place on thin flat plates. It is to be expected that slightly cambered, thin wing sections will behave similarly. The following test of two such wing sections were made for the purpose of verifying this supposition.

AIRFOILS↗
NASA NTRS1948

Lifting-surface-theory aspect-ratio corrections to the lift and hinge-moment parameters for full-span elevators on horizontal tail surfaces

A limited number of lifting-surface-theory solutions for wings with chordwise loadings resulting from angle of attack, parabolic-ac camber, and flap deflection are now available. These solutions were studied with the purpose of determining methods of extrapolating the results in such a way that they could be used to determine lifting-surface-theory values of the aspect-ratio corrections to the lift and hinge-moment parameters for both angle-of-attack and flap-deflection-type loading that could be used to predict the characteristics of horizontal tail surfaces from section data with sufficient accuracy for engineering purposes. Such a method was devised for horizontal tail surfaces with full-span elevators. In spite of the fact that the theory involved is rather complex, the method is simple to apply and may be applied without any knowledge of lifting-surface theory. A comparison of experimental finite-span and section value and of the estimated values of the lift and hinge-moment parameters for three horizontal tail surfaces was made to provide an experimental verification of the method suggested. (author)

Swanson, Robert S↗
NASA NTRS1918

Aerofoils and Aerofoil Structural Combinations

Report presents results of wind tunnel tests of cambered aerofoils and body-wing combinations used for biplanes. Aerodynamic characteristics including drag, lift-drift ratio and stability derivatives are given.

Gorrell, Edgar S↗
NASA NTRS1920

The aerodynamic properties of thick aerofoils suitable for internal bracing

The object of this investigation was to determine the characteristics of various types of wings having sufficient depth to entirely inclose the wing bracing, and also to provide data for the further design of such sections. This type of wing is of interest because it eliminates the resistance of the interplane bracing, a portion of the airplane that sometimes absorbs one-quarter of the total power required to fly, and because these wings may be made to give a very high maximum lift. Results of the investigation of the following subjects are given: (1) effect of changing the upper and lower camber of thick aerofoils of uniform section; (2) effect of thickening the center and thinning the tips of a thin aerofoil; (3) effect of adding a convex lower surface to a tapered section; (4) effect of changing the mean thickness with constant center and tip sections; and (5) effect of varying the chord along the span.

Norton, F H↗
NASA NTRS1923

Practical stability and controllability of airplanes

The effect of the characteristics of an airplane on balance, stability, and controllability, based on free flight tests, is discussed particularly in respect to the longitudinal motion. It is shown that the amount of longitudinal stability can be varied by changing the position of the center of gravity or by varying the aspect ratio of the tail plane, and that the stability for any particular air speed can be varied by changing the camber of the tail plane. It is found that complete longitudinal stability may be obtained even when the tail plane is at all times a lifting surface. Empirical values are given for the characteristics of a new airplane for producing any desired amount of stability and control, or to correct the faults of an airplane already constructed. (author)

Norton, F H↗
NASA NTRS1923

Aerodynamic properties of thick airfoils II

This investigation is an extension of NACA report no. 75 for the purpose of studying the effect of various modifications in a given wing section, including changes in thickness, height of lower camber, taper in thickness, and taper in plan form with special reference to the development of thick, efficient airfoils. The method consisted in testing the wings in the NACA 5-foot wind tunnel at speeds up to 50 meters (164 feet) per second while they were being supported on a new type of wire balance. Some of the airfoils developed showed results of great promise. For example, one wing (no. 81) with a thickness in the center of 4.5 times that of the U. S. A. 16 showed both uniformly high efficiency and a higher maximum lift than this excellent section. These thick sections will be especially useful on airplanes with cantilever construction. (author)

Norton, F H↗
NASA NTRS1926

Model tests with a systematic series of 27 wing sections at full Reynolds number

A systematic series of 27 wing sections, characterized by a small travel of the center or pressure, have been investigated at 20 atmospheres pressure in the variable density wind tunnel of the National Advisory Committee for Aeronautics. The results are consistent with each other, and indicate that for such "stable" sections a small effective camber, a small effective S-shape and a thickness of 8 to 12 per cent lead to good aerodynamic properties.

Munk, Max M↗
NASA NTRS1930

Aerodynamic Characteristics of Twenty-Four Airfoils at High Speeds

The aerodynamic characteristics of 24 airfoils are given for speeds of 0.5, 0.65, 0.8, 0.95, and 1.08 times the speed of sound, as measured in an open-jet air stream 2 inches in diameter, using models of 1-inch chord. The 24 airfoils belong to four general groups. The first is the standard R. A. F. family in general use by the Army and Navy for propeller design, the members of the family differing only in thickness. This family is represented by nine members ranging in thickness from 0.04 to 0.20 inch. The second group consists of five members of the Clark Y family, the members of the family again differing only in thickness. The third group, comprising six members, is a second R. A. F. Family in which the position of the maximum ordinate is varied. Combined with two members of the first R.A.F. family, this group represents a variation of maximum ordinate position from 30 to 60 percent of the chord in two camber ratios, 0.08 and 0.16. The fourth group consists of three geometrical forms, a flat plate, a wedge, and a segment of a right circular cylinder. In addition one section used in the reed metal propeller was included. These measurements form a part of a general program outlined at a Conference on Propeller Research organized by the National Advisory Committee for Aeronautics and the work was carried out with the financial assistance of the committee (author)

Brigg, L J↗
NASA NTRS1931

Large-scale aerodynamic characteristics of airfoils as tested in the variable density wind tunnel

In order to give the large-scale characteristics of a variety of airfoils in a form which will be of maximum value, both for airplane design and for the study of airfoil characteristics, a collection has been made of the results of airfoil tests made at full-scale values of the reynolds number in the variable density wind tunnel of the National Advisory Committee for Aeronautics. They have been corrected for tunnel wall interference and are presented not only in the conventional form but also in a form which facilitates the comparison of airfoils and from which corrections may be easily made to any aspect ratio. An example showing the method of correcting the results to a desired aspect ratio has been given for the convenience of designers. In addition, the data have been analyzed with a view to finding the variation of the aerodynamic characteristics of airfoils with their thickness and camber.

Jacobs, Eastman N↗
NASA NTRS1932

On the theory of wing sections with particular reference to the lift distribution

This report gives a simple and exact method of calculating the lift distribution on thin wing sections. The most essential feature of the new theory is the introduction of an "ideal angle of attack," this angle being defined as that at which the flow enters the leading edge smoothly or, more precisely, as the angle of attack at which the lift at the leading edge equals zero. The lift distribution at this particular angle is shown to be a characteristic property of the section and has been termed the "basic distribution." it is shown that the lift of a wing section may always be considered to consist of (a) the basic distribution and (b) the additional distribution, where the latter is independent of the mean camber line and thus identical for all thin sections. The specific reason for the poor aerodynamic qualities of thin wing sections is pointed out as being due to the fact that the additional lift in potential flow becomes infinite at the leading edge. It is established that the essential parameter occurring in this analysis is the radius of curvature at the leading edge. It is further established that the actual slope of the lift curve is dependent on this parameter. The theoretical lift distribution is compared with the distribution obtained by direct measurement on a number of the more conventional wing sections. The new theory is of value in calculating the strength of wing sections.

Theodorsen, Theodore↗