Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CALCULATION METHODS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

An inverse method for the calculation of through-thickness fatigue crack closure behavior

An inverse technique was used to calculate through-thickness fatigue crack closure behavior. The through-thickness variation in crack opening stress-intensity factor was calculated by considering the variation in the three-dimensional stress-intensity factor, the variation in crack growth rate along the crack front, and a relationship between the crack growth rate and effective stress-intensity factor range (da/dN-Delta-K(eff)). The three-dimensional stress-intensity factor variation was obtained from an elastic finite element analysis of specific crack-front profiles observed experimentally. The variation in crack growth rate along the crack front was obtained experimentally from comparison of observed crack front changes. The da/dN-Delta-K(eff) relationship was estimated from high stress ratio, constant load amplitude, and fatigue crack growth tests. The through-thickness crack opening stress-intensity factor results agreed with crack opening measurements obtained from fatigue striations, near-tip strain gages, and remote strain and displacement gages.

Dawicke, D. S.↗
NASA NTRS1952

Propeller induced angles of attack and section angles of attack for the NACA 10-(3)(066)-03, 10-(3)(049)-03, 10-(3)(090)-03, 10-(5)(066)-03, and 10-(0)(066)-03 propellers

This paper presents the results of an induced angle-of-attack calculation using a method applicable to a propeller with arbitrary circulation distribution. Tables of induced angles of attack and section angles of attack and curves of wake-survey results are presented for the NACA 10-(3)(066)-03, 10-(3)(049)-03, 10-(3)(090)-03, 10-(5)(066)-03, and 10-(0)(066)-03 propellers. A brief description of the method of calculating propeller induced angles of attack is given.

Igoe, William, B↗
NASA NTRS1994

Use of Navier-Stokes methods for the calculation of high-speed nozzle flow fields

Flows through three reference nozzles have been calculated to determine the capabilities and limitations of the widely used Navier-Stokes solver, PARC. The nozzles examined have similar dominant flow characteristics as those considered for supersonic transport programs. Flows from an inverted velocity profile (IVP) nozzle, an under expanded nozzle, and an ejector nozzle were examined. PARC calculations were obtained with its standard algebraic turbulence model, Thomas, and the two-equation turbulence model, Chien k-epsilon. The Thomas model was run with the default coefficient of mixing set at both 0.09 and a larger value of 0.13 to improve the mixing prediction. Calculations using the default value substantially underpredicted the mixing for all three flows. The calculations obtained with the higher mixing coefficient better predicted mixing in the IVP and underexpanded nozzle flows but adversely affected PARC's convergence characteristics for the IVP nozzle case. The ejector nozzle case did not converge with the Thomas model and the higher mixing coefficient. The Chien k-epsilon results were in better agreement with the experimental data overall than were those of the Thomas run with the default mixing coefficient, but the default boundary conditions for k and epsilon underestimated the levels of mixing near the nozzle exits.

Georgiadis, Nicholas J.↗
NASA NTRS1977

A numerical method for the exact calculation of airloads associated with impulsively started wings

A numerical method is developed to calculate three-dimensional potential flows due to the steady and impulsive motion of isolated wing and wing-wing interaction problems. The velocity potential is represented by a discrete set of constant-doublet quadrilaterals on wing and wake surfaces. The exact surface boundary condition is enforced, and the solution is obtained in a step-by-step fashion, configurations being impulsively started from rest. Free-wake geometries are generated for each time step with Rankine or Lamb viscous vortex segments used in wake-velocity calculations. Sample results include calculated performance to steady state for a thick wing and indicial lift of a wing-wing interaction problem.

Summa, J. M.↗
NASA NTRS1988

Non-oscillatory spectral Fourier methods for shock wave calculations

A non-oscillatory spectral Fourier method is presented for the solution of hyperbolic partial differential equations. The method is based on adding a nonsmooth function to the trigonometric polynomials which are the usual basis functions for the Fourier method. The high accuracy away from the shock is enhanced by using filters. Numerical results confirm that no oscillations develop in the solution. Also, the accuracy of the spectral solution of the inviscid Burgers equation is shown to be higher than a fixed order.

Cai, Wei↗
NASA NTRS1991

Determination of a natural basis function set on thick, structured slabs using Prony's method

The calculation of currents on a thick, structured slab such as a thick slab of honeycomb is discussed. Unfortunately, for certain applications, the slab can be on the order of several wavelengths, so that the straightforward application of the method of moments using subdomain basis functions is too expensive. The authors discuss how to apply Prony's method to the currents calculated for a thin, structured slab to obtain a natural set of basis functions to represent the currents in the interior of a thick slab. Prony's method represents the currents as a series of complex exponential functions. The thick slab problem is then solved by the method of moments using subdomain basis functions near the slab interfaces and one or two of the complex exponentials as basis functions within the slab.

Jorgenson, Roy E.↗
NASA NTRS1991

Drag calculations of wings using Euler methods

Several techniques for the calculation of drag using Euler-equation formulations are discussed and compared. Surface-pressure integration (a nearfield technique) as well as two different farfield calculation techniques are described and applied to three-dimensional flow-field solutions for an aspect-ratio-7 wing with attached flow. The present calculations are limited to steady, low-Mach-number flows around three-dimensional configurations in the absence of active systems such as surface blowing/suction and propulsion. Although the main focus of the paper is the calculation of aerodynamic drag, the calculation of aerodynamic lift is also briefly discussed. Three Euler methods are used to obtain the flowfield solutions. The farfield technique based on the evaluation of a wake-integral appears to provide the most consistent and accurate drag predictions.

Van Dam, C. P.↗
NASA NTRS1936

Methods and formulas for calculating the strength of plate and shell constructions as used in airplane design

This report is a compilation of previously published articles on formulas and methods of calculation for the determination of the strength and stability of plate and shell construction as employed in airplane design. In particular, it treats the problem of isotropic, orthotopic, and stiffened rectangular plates, thin curved panels, and circular cylinders under various loading conditions. The purpose of appending the pertinent literature references following the subjects discussed was to facilitate a comprehensive study of the treated problems.

Heck, O S↗
NASA NTRS1981

Basic advances in the finite-volume method for transonic potential flow calculations

The finite-volume method of Jameson and Caughey provides a framework within which it is possible to calculate transonic potential flows about essentially arbitrary geometrical configurations. Improvements designed to increase the accuracy of the basic scheme and its consistency in the far field will be described. These include the incorporation of an artificial viscosity which maintains the formal second-order accuracy of the scheme in supersonic zones, and a modification of the flux balances to allow the free-stream conditions to satisfy the difference equations identically. Results of calculations illustrating the importance of these effects will be presented.

Caughey, D. A.↗
NASA NTRS1976

Transonic flow calculations

The development of relaxation methods to calculate transonic flows is discussed. Rather accurate predictions can be made for a number of flows of interest using the transonic potential flow equation, which may be derived from the Euler equations for inviscid compressible flow by introducing the assumption that the flow is irrotational. Once the choice of a mathematical model has been settled, the numerical procedure for actually computing a solution contains two main elements: the construction of a discrete approximation which converges to the solution of the continuous problem in the limit as the mesh width is reduced to zero, and the solution of the resulting set of nonlinear difference equations by a convergent iterative scheme. The choice of an appropriate coordinate system and its influence on the accuracy of the discrete approximation is discussed. Several applications of the general method are described.

Jameson, A.↗