Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CALCINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Facile hydrothermal method synthesis of coralline-like Li{sub 1.2}Mn{sub 0.54}Ni{sub 0.13}Co{sub 0.13}O{sub 2} hierarchical architectures as superior cathode materials for lithium-ion batteries

Highlights: • A coralline-like Li{sub 1.20}Mn{sub 0.54}Ni{sub 0.13}Co{sub 0.13}O{sub 2} cathode was synthesized by hydrothermal method. • Initial discharge capacity of 250.2 mAh g{sup −1} for the cathode was obtained at 0.1 C. • A high reversible specific capacity of 210.2 mAh g{sup −1} after 100 cycles was acquired. • The high capacity retention of 84.5% was obtained even after 200 cycles at 10 C. - Abstract: A coralline-like lithium-rich layered cathode material with homogeneous composition of Li{sub 1.20}Mn{sub 0.54}Ni{sub 0.13}Co{sub 0.13}O{sub 2} has been successfully synthesized via a facile ethanolamine (EA)-mediated hydrothermal method route, with subsequent calcination at 850 °C. An initial specific discharge capacity of 250.2 mAh g{sup −1} and a reversible specific capacity of 210.2 mAh g{sup −1} after 100 cycles at a constant density of 25 mA g{sup −1} (1 C = 250 mA g{sup −1}) are acquired. Even at 10 C, it still delivers a discharge capacity of approximately 100 mA h g{sup −1}, thereby indicating its excellent high power performance. The sample also shows enhanced cycling performance with 88.5%, 79.9% and 90.5% of capacity retention after 100 cycles at 0.5, 5 and 10 C rates, respectively. Besides, 84.5% of initial capacity is retained even after 200 cycles at 10 C. Consequently, the fascinating electrochemical performance may facilitate the coralline-like LMNCO composite to be a promising alternative cathode for LIBs with a high application potential.

36 MATERIALS SCIENCE↗

Rechargable xLi{sub 2}MnO{sub 3}·(1 − x)Li{sub 4/3}Mn{sub 5/3}O{sub 4} electrode nanocomposite material as a modification product of chemical manganese dioxide by lithium additives

Highlights: • Li-ion battery cathode preparation procedure included MnO{sub 2} modification by Li-salts with subsequent heat treatment. • Li{sub 4}Mn{sub 5}O{sub 12}, Li{sub 2}MnO{sub 3,} and Li-rich phases form active nanocomposite cathode. • Heat treatment mode is of crucial importance for rechargeability. • Cathode material capacity is 150 mA h g{sup −1} within 2.5–4.5 V. - Abstract: Relatively simple preparation procedure of rechargeable Li-ion battery cathode material via manganese dioxide treatment with Li-containing additive and subsequent calcination has been demonstrated. X-ray diffraction, infrared spectroscopy, thermogravimetric analysis, and atomic force microscopy study were characterisation methods of modification products. Pyrolusite, Li{sub 0.3}MnO{sub 2}, layered Li{sub 2}MnO{sub 3}, and spinel Li{sub 4}Mn{sub 5}O{sub 12} phases were revealed as products of initial ramsdellite phase transformations at temperatures of heat treatment ranging from 360 °C to 600 °C. Optimal temperature of final heat treatment from the point of view of rechargeability and discharge characteristics was 450 °C. Samples heat-treated at 450 °C are characterized by the unique combination of Li{sub 4/3}Mn{sub 5/3}O{sub 4} and Li{sub 2}MnO{sub 3} phase components due to their structural integration, a significant degree of disordering, and sizes of nanocrystallites with Li diffusion path, which is the most favourable for reversibility. The prepared nanocomposite cathode material delivers a capacity of 150 mA h g{sup −1} within 2.5–4.5 V at 0.1 mA discharge.

36 MATERIALS SCIENCE↗

High rate performance of LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} cathode material synthesized by a carbon gel–combustion process for lithium ion batteries

Graphical abstract: The cycling stability of the LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} electrode was investigated at different discharge rates from 5 C to 50 C. - Highlights: • The LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} was prepared via a carbon gel–combustion process. • The sample showed high purity and nanosized particles. • The LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} electrode shows excellent rate capability and cyclic performance. - Abstract: The LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} electrode material was prepared via a carbon gel–combustion process using resorcinol–formaldehyde gel as fuel and nitrate as an oxidizer. The carbon gel process ensures the molecular-level homogeneity of the chemical product. The gas derived from carbon gel separates the raw material particles and restrains the growth of the grains to some extent, and well-crystallized nanosized powders are obtained with calcination at 700 °C for 6 h. As the cathode material for lithium-ion batteries, the discharge capacity of LiNi{sub 1/3}Co{sub 1/3}Mn{sub 1/3}O{sub 2} was as high as 175.6 mA h g{sup −1} in the first cycle at 0.5 C, and it could remain 163.0 mA h g{sup −1} within the voltage range of 2.5–4.4 V after 50 cycles. The electrode also showed outstanding rate capacities at high discharge rates such as 30 C and 50 C, suggesting the applications of the material in high power lithium-ion batteries.

36 MATERIALS SCIENCE↗

Preparation, ferromagnetic and photocatalytic performance of NiO and hollow Co{sub 3}O{sub 4} fibers through centrifugal-spinning technique

Highlights: • NiO and hollow Co{sub 3}O{sub 4} fibers with the diameter of about 10 μm were prepared through centrifugal-spinning technique. • The evolution mechanism from precursor to crystalline fibers was explored. • Both NiO and hollow Co{sub 3}O{sub 4} fibers show ferromagnetism. • The NiO fibers exhibit good photocatalytic performance. - Abstract: Both NiO and hollow Co{sub 3}O{sub 4} fibers with the diameter of about 10 μm have been successfully prepared through spinning high viscous sols into precursor fibers and followed calcination process. The evolution process from precursor to crystalline fibers and the microstructures of the obtained fibers were characterized by TG-DSC, FT-IR, XRD, HRTEM, SEM and the like. The method is facile and cost-effective for mass production of fibers and the obtained fibers are pure phase with high crystallinity. Their magnetic properties were investigated, showing that both the fibers are ferromagnetic. Meanwhile, the NiO fibers exhibit good photocatalytic performance for the removal of Congo red from water under UV light irradiation.

36 MATERIALS SCIENCE↗

Open porous BiVO{sub 4} nanomaterials: Electronspinning fabrication and enhanced visible light photocatalytic activity

Highlights: • BiVO{sub 4} nanofibers were successfully fabricated by electrospinning method. • PVP was used to adjust the viscosity and increase spinnability of the electrospinning sol. • BiVO{sub 4} nanofibers were used for the degradation of MB. • Compared to the submicron sized BiVO4, BiVO{sub 4} nanofibers show superior photocatalytic activity. - Abstract: Witnessed by X-ray powder diffraction (XRD), Raman, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) studies, BiVO{sub 4} nanofibers and porous nanostructures were successfully fabricated by electrospinning method using NH{sub 4}VO{sub 3} and Bi(NO{sub 3}){sub 3} as starting materials. Polyvinylpyrrolidinone (PVP) was used to tune the viscosity and spinnability of the electrospinning sol. The slow decomposition and combustion of PVP matrix prevented rapid crystal growth of BiVO{sub 4} nanostructures leading to considerably small crystallite size (approximately 19.1–28.3 nm) with less surface defects after two hours calcination at varying temperatures. This paid great tributes to the superior visible light photocatalytic activity when compared to the submicron sized BiVO{sub 4} prepared in the absence of PVP.

36 MATERIALS SCIENCE↗

Microwave-assisted polyol synthesis and characterization of pvp-capped cds nanoparticles for the photocatalytic degradation of tartrazine

Highlights: • PVP-stabilized CdS nanoparticles have been fabricated by a polyol-microwave method. • CdS nanoparticles were characterized and the size was approximately 48 ± 10 nm. • Catalytic activity of our nanoparticles was examined for tartrazine degradation. • Remarkable results were obtained under both UV and visible light irradiations. - Abstract: Polyvinylpyrrolidone capped cadmium sulfide nanoparticles have been successfully synthesized by a facile polyol method with ethylene glycol. Microwave irradiation and calcination were used to control the size and shape of nanoparticles. Characterization with scanning electron microscopy revealed a restricted nanoparticles growth comparing with the uncapped product, hexagonal phase and 48 nm average particle size were confirmed by X-ray diffraction, and finally mechanism of passivation was suggested depending on Fourier transform infrared spectra. The efficiency of nanoparticles was evaluated by the photocatalytic degradation of tartrazine in aqueous solution under UVC and visible light irradiation. Complete degradation of the dye was observed after 90 min of UVC irradiation under optimized conditions. Kinetic of reaction fitted well to the pseudo-first-order kinetic and Langmuir–Hinshelwood models. Furthermore, 85% degradation of the dye in 9 h under visible light suggests that cadmium sulfide is a promising tool to work under visible light for environmental remediation.

36 MATERIALS SCIENCE↗

Mesoporous silica materials modified with alumina polycations as catalysts for the synthesis of dimethyl ether from methanol

Highlights: • Deposition of alumina ologoctaions on mesoporous silicas modified with surface −SO{sub 3}H groups. • Alumina aggregates generated acid properties in the silica supports. • Alumina modified SBA-15 and MCF were active and selective catalysts in DME synthesis. - Abstract: Mesoporous silica materials (SBA-15 and MCF) were used as catalytic supports for the deposition of aggregated alumina species using the method consisting of the following steps: (i) anchoring 3-(mercaptopropyl)trimethoxysilane (MPTMS) on the silica surface followed by (ii) oxidation of −SH to−SO{sub 3}H groups and then (iii) deposition of aluminum Keggin oligocations by ion-exchange method and (iv) calcination. The obtained samples were tested as catalysts for synthesis of dimethyl ether from methanol. The modified silicas were characterized with respect to the ordering of their porous structure (XRD), textural properties (BET), chemical composition (EDS, CHNS), structure ({sup 27}Al NMR, FTIR) and location of alumina species (EDX-TEM), surface acidity (NH{sub 3}-TPD, Py-FTIR) and thermal stability (TGA). The obtained materials were found to be active and selective catalysts for methanol dehydration to dimethyl ether (DME) in the MTD process (methanol-to-dimethyl ether).

36 MATERIALS SCIENCE↗

Gadolinium oxide decorated multiwalled carbon nanotube/tridoped titania nanocomposites for improved dye degradation under simulated solar light irradiation

Graphical abstract: Illustration of the collaborative effect between MWCNT-Gd and Gd,N,S-TiO{sub 2} towards degradation of AB 74. - Highlights: • MWCNT-Gd/tridoped titania was successfully prepared via a sol-gel method. • XPS revealed the presence of Ti, C, O, S, N and Gd in MWCNT-Gd/Gd,N,S-TiO{sub 2}. • MWCNT-Gd/Gd,N,S-TiO{sub 2} displayed 100% degradation of acid blue 74 in 150 min. • Over 60% TOC removal by MWCNT-Gd/Gd,N,S-TiO{sub 2}. - Abstract: Neodymium/gadolinium/europium, nitrogen and sulphur tridoped titania (Nd/Gd/Eu, N,S-TiO{sub 2}) was hybridised with pre-synthesised gadolinium oxide decorated multiwalled carbon nanotubes (MWCNT-Gd) using a sol–gel method. Subsequent to drying and calcination, composite photocatalysts: MWCNT-Gd/Nd,N,S-TiO{sub 2}, MWCNT-Gd/Gd,N,S-TiO{sub 2} and MWCNT-Gd/Eu,N,S-TiO{sub 2}, were obtained and characterised using TEM, SEM-EDX, UV–vis, XPS, XRD and FT-IR. Acid blue 74 (AB74) was used as a model dye to investigate the photocatalytic degradation properties of the prepared materials under simulated solar light irradiation. Coupling the different tridoped titania with MWCNT-Gd enhanced their activity compared to MWCNT/TiO{sub 2}, MWCNT-Gd/TiO{sub 2} and MWCNT/Gd,N,S-TiO{sub 2}. MWCNT-Gd/Gd,N,S-TiO{sub 2} showed the highest activity towards AB74 degradation reaching 100% decolourisation after 150 min of irradiation. Total organic carbon analysis revealed that over 50% of the AB74 molecules were completely mineralised after 180 min of irradiation in the presence of MWCNT-Gd/Gd,N,S-TiO{sub 2}.

36 MATERIALS SCIENCE↗

Ceria nanoparticles uniformly decorated on graphene nanosheets with coral-like morphology for high-performance supercapacitors

Graphical abstract: The study reported the synthesis of coral-like CeO{sub 2}/GNs for supercapacitors. The unique architecture with overall connected framework and good conducting network of the graphene greatly boosts the Faradaic redox reaction. Therefore, the CeO{sub 2}/GNs delivers an excellent electrochemical performance. - Highlights: • The study reported the synthesis of CeO{sub 2}/GNs. • The graphene was woven into CeO{sub 2}, acting as a good conducting network. • The CeO{sub 2}/GNs shows a coral-like structure. • The architecture creates an overall connected framework. • The CeO{sub 2}/GNs delivers good capacitive performances. - Abstract: CeO{sub 2}/graphene was synthesized by a simple microwave method along with subsequent calcination. CeO{sub 2} nanoparticles with an average size of 68.8 nm are uniformly decorated on graphene nanosheets (CeO{sub 2}/GNs). The CeO{sub 2}/GNs displays a like-coral morphology. The architecture including overall connected framework, abundant intercrossed and interconnected nanochannels and perfect conducting network of the graphene, endows the CeO{sub 2}/GNs material with a superior electron and mass transport. As a result, the CeO{sub 2}/GNs gives a high specific capacitance of 503.4 F/g at 2 A/g and good cycle performance with 91.8% capacitance retention after 3000 cycles. Further, an asymmetric supercapacitors was assembled by using CeO{sub 2}/GNs as the positive electrode and activated carbon as the negative electrode, the asymmetric device demonstrate a favorable energy density of 30.2 Wh/kg at the power density of 750.0 W/kg and superior cycle life with 86.4% the capacitance retenion at 5 A/g after 3000 cycles.

36 MATERIALS SCIENCE↗

High electrochemical performances of hierarchical hydrangea macrophylla like NiCo{sub 2}O{sub 4} and NiCo{sub 2}S{sub 4} as anode materials for Li-ion batteries

Graphical abstract: Mesoporous hydrangea macrophylla like NiCo{sub 2}O{sub 4} and NiCo{sub 2}S{sub 4} have been fabricated, which present excellent electrochemical performances as anode materials for Li-ion batteries. - Highlights: • Hierarchical NiCo{sub 2}O{sub 4} is successfully fabricated. • Hierarchical NiCo{sub 2}S{sub 4} is prepared via sulfide anion exchange. • The hierarchical NiCo{sub 2}O{sub 4} and NiCo{sub 2}S{sub 4} exhibit good electrochemical properties. - Abstract: In this work, hierarchical hydrangea macrophylla like NiCo{sub 2}O{sub 4} has been synthesized by solvothermal method followed by calcination treatment in air. By using Na{sub 2}S as sulfur source, the NiCo{sub 2}O{sub 4} is converted into NiCo{sub 2}S{sub 4}. Such hierarchical NiCo{sub 2}O{sub 4} exhibits a high specific capacity and excellent cycling stability (928 mAh g{sup −1} at a current density of 100 mA g{sup −1} after 100 cycles). Even at high current density of 2000 mA g{sup −1}, the electrode still delivers a specific capacity of 371 mAh g{sup −1} after 50 cycles. When the NiCo{sub 2}S{sub 4} is used as anode materials for lithium-ion batteries, a high discharge capacity of 1204 mAh g{sup −1} can be achieved. Meanwhile, the NiCo{sub 2}S{sub 4} electrode displays good cycling stability and rate capability. The excellent electrochemical performances can be attributed to the unique porous structure, which can effectively reduce the diffusion length for lithium ions and electrons, and alleviate volume expansion during the charge-discharge processes.

36 MATERIALS SCIENCE↗

Screen printing large-area organometal halide perovskite thin films for efficient photodetectors

Highlights: • A stable paste with perovskite precursor was produced out. • Screen printing was proposed to fabricate perovskite thin films. • The perovskite photodetectors with symmetric architectures show reasonable performance with high photocurrent and fast response. - Abstract: Organometal halide perovskites have demonstrated excellent features compared to conventional optoelectronic materials. To date, the perovskite films have generally been fabricated by either spin coating or vapor deposition. However, both methods cannot simultaneously meet large scale and low cost of production. Here, a simple, low-cost and high-throughput strategy was proposed to fabricate perovskite thin films, which were further applied in photodetectors. First, lead compound nanoparticles were synthesized by a solvent precipitation method, then a paste with the lead compound nanoparticles was screen printed to form PbO films involving calcination, and next the PbO films directly reacted with CH{sub 3}NH{sub 3}I solution to convert into CH{sub 3}NH{sub 3}PbI{sub 3} films. The CH{sub 3}NH{sub 3}PbI{sub 3} films consisted of micron crystals, whose sizes can be effectively controlled by adjusting CH{sub 3}NH{sub 3}I concentration. Furthermore, the CH{sub 3}NH{sub 3}PbI{sub 3} films were applied in photodetectors, which showed good performance with high sensitivity and fast response.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Facile synthesis of high surface area nanostructured ceria-zirconia-yttria-lanthana solid solutions with the assistance of lauric acid and dodecylamine

Highlights: • High surface area nanostructured ceria-zirconia-yttria-lanthana solid solutions are synthesized by a facile method. • Hydrophobic surfaces are obtained with the addition of lauric acid and dodecylamine in the synthesis. • The introduced lauric acid and dodecylamine are chemically adsorbed onto the surface of materials through a coordination effect. • Excellent thermal stability are obtained in lauric acid and dodecylamine assisted materials. - Abstract: Co-precipitation combined with the assistance of lauric acid and dodecylamine was used to synthesize high surface area nanostructured ceria-zirconia-yttria-lanthana solid solutions (CZ-L and CZ-D). The promotion effects of lauric acid and dodecylamine were studied systematically by N{sub 2} adsorption-desorption, scanning electron microscopy (SEM), transmission electron microscopy (TEM), FT-IR and Raman analysis. After being thermal aged at 1100 °C for 4 h in air, CZ-L and CZ-D present high surface areas of 26 m{sup 2}/g and 16 m{sup 2}/g, respectively. The results indicate that the added lauric acid and dodecylamine are chemically adsorbed onto the surface of materials through coordination effect. The obtained hydrophobic surface could greatly decrease the amount of superficial adsorbed water on the material and significantly reduce the surface tension. The addition of lauric acid and dodecylamine could also effectively support the network structures of the material and resist the collapse of pores upon drying and calcination.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural and morphological characteristics of CuMe2O4 spinels in reductive atmosphere depending on the chemical nature of Me(III) cations

Highlights: • CuCr{sub 1}Fe{sub 1}O{sub 4}, CuFe{sub 1}Al{sub 1}O{sub 4} and CuCr{sub 1}Al{sub 1}O{sub 4} samples of a spinel structure, prepared by thermal decomposition of common hydroxycarbonates at 650°C have nonuniforn atomic distribution in the spinel nanoparticles. • The extent of copper reduction and structural features of Cu{sup 0} produced upon reduction of CuMe{sub 2}O{sub 4} spinels depend on the chemical nature of Me{sup 3+}. • The nature of Me{sup 3+} makes it possible to control the structural characteristics, particularly in the reduced state. - Abstract: Mixed copper-containing spinel-type compounds CuCr{sub 1}Fe{sub 1}O{sub 4}, CuCr{sub 1}Al{sub 1}O{sub 4} and CuFe{sub 1}Al{sub 1}O{sub 4} were studied by means of XRD and HREM after calcination at 650 °C in the air and treatments in a hydrogen-containing medium at 270–210 °C (H{sub 2}:He = 5:95; H{sub 2}:CO:H{sub 2}O = 50:7:43). The effect of the chemical nature of Me{sup 3+} cation on the structural-morphological characteristics of oxide systems and their transformations in a reducing medium was investigated. It was shown that the nature of Me{sup 3+} cation makes it possible to control the structural characteristics, particularly in the reduced state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Volatile organic compound sensing based on coral rock-like ZnO

Highlights: • A coral rock-like ZnO with porous structure was successfully synthesized. • Coral rock-like ZnO realized the large gas response towards VOCs. • The porous structure may play an essential role in the surface sensing reaction. - Abstract: This work presented highly sensitive coral rock-like ZnO to investigate the sensing performances for volatile organic compounds (VOCs), including formaldehyde, methylbenzene, methanol and acetone. The coral rock-like ZnO with porous structure was synthesized using a solvothermal process and subsequent calcination. The gas response of the sensor based on the coral rock-like ZnO was reported for the four types of VOC vapors at different operating temperatures and gas concentrations. It was found that the fabricated sensor was sensitive to the four gases, revealing large gas response as well as fast response and recovery speed, which was ascribed to its distinctive porous nanostructure, resulting in adequate surface sensing reaction and effective gas diffusion.

36 MATERIALS SCIENCE↗

One-pot synthesis of porous g-C3N4 nanomaterials with different morphologies and their superior photocatalytic performance

Highlights: • g-C{sub 3}N{sub 4}, liking a yolk-shell cake, was prepared. • The shell region is porous nanosheets and the yolk region is hollow particles. • The surface area and pore volume of two types of g-C{sub 3}N{sub 4} could be controlled. • The as-prepared porous g-C{sub 3}N{sub 4} nanomaterials exhibit improved photocatalytic activity. - Abstract: Graphitic carbon nitride (g-C{sub 3}N{sub 4}), liking a yolk-shell cake, was successfully prepared via a gas-bubble template method with the assistance of NH{sub 4}Cl. In this special structure, the shell region consists of numerous thin sheets with rich porosity, while the yolk region consists of a lot of cross-linked large hollow particles. The formation mechanism of yolk-shell structure was investigated via adjusting the mass ratio of NH{sub 4}Cl to melamine, and calcination temperature. The surface area and pore volume of the two types of porous g-C{sub 3}N{sub 4} nanomaterials significantly depend on the mass ratio of NH{sub 4}Cl to melamine in a certain extent. The as-prepared porous g-C{sub 3}N{sub 4} nanomaterials exhibit improved photocatalytic activity compared to bulk g-C{sub 3}N{sub 4}. Moreover, the porous thin sheets in shell region possess larger specific surface area, higher light utilization, higher charge separation and transfer efficiency, than the hollow particles in yolk region, leading to the superior photocatalytic performance. We believe that this simple, economical, and nontoxic approach for the preparation of g-C{sub 3}N{sub 4} nanomaterials opens new possibilities for scalable synthesis of g-C{sub 3}N{sub 4}-based materials with more controllable structures.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synergistic effect of surface defect and interface heterostructure on TiO2/BiOIO3 photocatalytic oxide gas-phase mercury

Highlights: • TiO{sub 2}/BiOIO{sub 3} photocatalysts were prepared for the first time. • Synergistic effect of surface defect and interface heterostructure on TiO{sub 2}/BiOIO{sub 3} was investigated in detail. • The SO{sub 2} and NO obtain an adverse effect on photocatalytic oxide mercury while the HCl can promote the oxidation process. • The mechanism of photocatalytic removal gas-phase mercury by TiO{sub 2}/BiOIO{sub 3} photocatalysts was proposed. - Abstract: Enhancing the photocatalytic activity of the semiconductors by introducing surface defect or forming interface heterostructure has attracted widespread interests. In this work, a novel photocatalysts, defect TiO{sub 2}/BiOIO{sub 3} heterostructure possessing both surface defect and interface heterostructure, was prepared via calcination method for the first time. The physicochemical property of the as-prepared defect TiO{sub 2}/BiOIO{sub 3} heterostructure was investigated by XRD, SEM, TEM, EDS, XPS, FT-IR, BET, DRS, and PL characterization. The results indicated that introducing surface defect and forming interface heterostructure on photocatalysts at the same time can enhance the visible light response, promote the transfer velocity of the photocarriers and suppress the recombination of photo-generated electron-hole pairs. Furthermore, it exhibits an enhanced activity on photocatalytic oxidation of gas-phase elemental mercury (Hg°), which shows the highest Hg° oxidation efficiency of 91.12% under visible light.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced visible-light-driven photocatalytic activities of Bi2Fe4O9/g-C3N4 composite photocatalysts

Highlights: • The novel Bi{sub 2}Fe{sub 4}O{sub 9}/g-C{sub 3}N{sub 4} composite photocatalysts have been designed and prepared. • Combination of Bi{sub 2}Fe{sub 4}O{sub 9} and g-C{sub 3}N{sub 4} could enhance the visible-light-driven photocatalytic degradation for RhB. • The effects of Bi{sub 2}Fe{sub 4}O{sub 9}/g-C{sub 3}N{sub 4} weight ratios on photocatalytic performance in the composite have been discussed. • The Z-scheme photocatalytic mechanism was proposed and discussed in detail. - Abstract: A series of Bi{sub 2}Fe{sub 4}O{sub 9}/g-C{sub 3}N{sub 4} composite photocatalysts are prepared via a facile mixing-calcination method. The crystal structures of composites are investigated by X-ray Diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FT-IR). The Field Emission Scanning Electron Microscope (FE-SEM) in combination with Energy Dispersive X-ray Spectroscopy (EDS) mapping analysis and Transmission Electron Microcopy (TEM) images illustrate the uniform distribution of constituent elements and clear interface between Bi{sub 2}Fe{sub 4}O{sub 9} and g-C{sub 3}N{sub 4} component. The visible-light-driven photocatalytic rates of Rhodamine B over Bi{sub 2}Fe{sub 4}O{sub 9}/g-C{sub 3}N{sub 4} composites increase and then decrease with the increase of g-C{sub 3}N{sub 4} content. The effects of Bi{sub 2}Fe{sub 4}O{sub 9}/g-C{sub 3}N{sub 4} weight ratios on photocatalytic performance are thoroughly discussed. Meanwhile, the active species trapping experiments and the electrochemical impedance spectra as well as the electronic energy-band structure estimation analysis demonstrate that the photocatalytic mechanism for Bi{sub 2}Fe{sub 4}O{sub 9}/g-C{sub 3}N{sub 4} composites is ascribed to the Z-scheme. In addition, the recyclability and stability experiments of the composite are also studied.

36 MATERIALS SCIENCE↗

Decoration of Fe3O4 and CoWO4 nanoparticles over graphitic carbon nitride: Novel visible-light-responsive photocatalysts with exceptional photocatalytic performances

Highlights: • g-C{sub 3}N{sub 4}/Fe{sub 3}O{sub 4}/CoWO{sub 4} nanocomposites as efficient photocatalysts are reported. • The g-C{sub 3}N{sub 4}/Fe{sub 3}O{sub 4}/NiWO{sub 4} (10%) nanocomposite exhibited the highest activity. • Activity was 12.5-folds greater than g-C{sub 3}N{sub 4} in RhB degradation under visible light. • The nanocomposite is magnetically separated from the treated solution. - Abstract: In this work, nanoparticles of Fe{sub 3}O{sub 4} and CoWO{sub 4} were decorated over graphitic carbon nitride (g-C{sub 3}N{sub 4}) to fabricate very efficient visible-light-responsive photocatalysts through a facile refluxing-calcination method. Among the fabricated photocatalysts, the g-C{sub 3}N{sub 4}/Fe{sub 3}O{sub 4}/CoWO{sub 4} (10%) nanocomposite displayed superior activity in degradation of RhB, which is 12.5 and 11.5 times superior than the pristine g-C{sub 3}N{sub 4} and g-C{sub 3}N{sub 4}/Fe{sub 3}O{sub 4} photocatalysts, respectively. Additionally, exceptional performance of the ternary photocatalyst was confirmed in degradations of three organic pollutants under visible light. Higher harvesting ability of visible light and effective separation of electron/hole pairs from recombination are two main factors responsible for the observed exceptional photocatalytic activity of the ternary nanocomposite. Due to enough saturation magnetization of the ternary nanocomposite, the photocatalyst was entirely separated from the degradation system by a conventional magnet. Finally, photostability of the ternary photocatalyst during four successive runs was confirmed.

36 MATERIALS SCIENCE↗