Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BURN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Measurements of ultrafine particles from a gas-turbine burning biofuels

Measurements of ultrafine particles have been performed at the exhaust of a low emission microturbine for power generation. This device has been fuelled with liquid fuels, including a commercial diesel oil, a mixture of the diesel oil with a biodiesel and kerosene, and tested under different loads. Primarily attention has been focused on the measurements of the size distribution functions of the particles emitted from the system by using particle differential mobility analysis. A bimodal size distribution function of the particle emitted has been found in all the examined conditions. Burning diesel oil, the first mode of the size distribution function of the combustion-formed particles is centered at around 2-3 nm, whereas the second mode is centered at about 20-30 nm. The increase of the turbine load and the addition of 50% of biodiesel has not caused changes in the shape of size distribution of the particles. A slightly decrease of the amount of particle formed has been found. By using kerosene the amount of emitted particles increases of more than one order of magnitude. Also the shape of the size distribution function changes with the first mode shifted towards larger particles of the order of 8-10 nm but with a lower emission of larger 20-30 nm particles. Overall, in this conditions, the mass concentration of particles is increased respect to the diesel oil operation. Particle sizes measured with the diesel oil have been compared with the results on a diesel engine operated in the same power conditions and with the same fuel. Measurements have showed that the mean sizes of the formed particles do not change in the two combustion systems. However, diesel engine emits a number concentration of particles more than two orders of magnitude higher in the same conditions of power and with the same fuel. By running the engine in more premixed-like conditions, the size distribution function of the particles approaches that measured by burning kerosene in the microturbine indicating that the distribution function of the sizes of the emitted particles can be strongly affected by combustion conditions. (author)

02 PETROLEUM↗

Modeling Deep Burn TRISO Particle Nuclear Fuel

Under the DOE Deep Burn program TRISO fuel is being investigated as a fuel form for consuming plutonium and minor actinides, and for greater efficiency in uranium utilization. The result will thus be to drive TRISO particulate fuel to very high burn-ups. In the current effort the various phenomena in the TRISO particle are being modeled using a variety of techniques. The chemical behavior is being treated utilizing thermochemical analysis to identify phase formation/transformation and chemical activities in the particle, including kernel migration. First principles calculations are being used to investigate the critical issue of fission product palladium attack on the SiC coating layer. Density functional theory is being used to understand fission product diffusion within the plutonia oxide kernel. Kinetic Monte Carlo techniques are shedding light on transport of fission products, most notably silver, through the carbon and SiC coating layers. The diffusion of fission products through an alternative coating layer, ZrC, is being assessed via DFT methods. Finally, a multiscale approach is being used to understand thermal transport, including the effect of radiation damage induced defects, in a model SiC material.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Microstructural Modeling of Thermal Conductivity of High Burn-up Mixed Oxide Fuel

Predicting the thermal conductivity of oxide fuels as a function of burn-up and temperature is fundamental to the efficient and safe operation of nuclear reactors. However, modeling the thermal conductivity of fuel is greatly complicated by the radially inhomogeneous nature of irradiated fuel in both composition and microstructure. In this work, radially and temperature-dependent models for effective thermal conductivity were developed utilizing optical micrographs of high burn-up mixed oxide fuel. The micrographs were employed to create finite element meshes with the OOF2 software. The meshes were then used to calculate the effective thermal conductivity of the microstructures using the BISON fuel performance code. The new thermal conductivity models were used to calculate thermal profiles at end of life for the fuel pellets. These results were compared to thermal conductivity models from the literature, and comparison between the new finite element-based thermal conductivity model and the Duriez–Lucuta model was favorable.

36 MATERIALS SCIENCE↗

EBSD and TEM Characterization of High Burn-up Mixed Oxide Fuel

Understanding and studying the irradiation behavior of high burn-up oxide fuel is critical to licensing of future fast breeder reactors. Advancements in experimental techniques and equipment are allowing for new insights into previously irradiated samples. In this work dual column focused ion beam (FIB)/scanning electron microscope (SEM) was utilized to prepared transmission electron microscope samples from mixed oxide fuel with a burn-up of 6.7% FIMA. Utilizing the FIB/SEM for preparation resulted in samples with a dose rate of <0.5 mRem/h compared to approximately 1.1 R/h for a traditionally prepared TEM sample. The TEM analysis showed that the sample taken from the cooler rim region of the fuel pellet had approximately 2.5x higher dislocation density than that of the sample taken from the mid-radius due to the lower irradiation temperature of the rim. The dual column FIB/SEM was additionally used to prepared and serially slice approximately 25 um cubes. High quality electron back scatter diffraction (EBSD) were collected from the face at each step, showing, for the first time, the ability to obtain EBSD data from high activity irradiated fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effect of heat treatment on the microstructure of medium burn-up U-Mo monolithic fuel foils

Using scanning electron microscopy (SEM), this study evaluates the microstructure evolution of U-Mo fuel foils made with and without heat treatment at medium burn-up (of approximately 5 x 10 21 f/cm 3 ). The impact of annealing treatments on critical microstructural properties of the U-Mo fuel foils, including porosity, grain structure, Mo homogeneity, and fuel interaction with the Zr interlayer, was examined using large area lift outs (LALOs). The heat-treated specimens presented less grain refining at these burnups when compared to the un-heated specimens. Grain refinement was associated with porosities and fission products precipitation. Heat treatment can reduce fuel swelling during irradiation. Chemical inhomogeneity (Mo banding) was found to persist in the un-heated samples but was not present in the heat-treated samples. Thus, heat-treated U-Mo foils allows for more predictable fuel behavior under irradiation with respect to un-heated foils. The U-Mo and Zr interaction layer appears to be thicker and more continuous in the heat-treated sample which has been associated with stronger interface integrity during irradiation, as also observed in previous studies. These observations may indicate an overall improved performance of heat-treated fuel foil in a reactor. Further, the effect of local burn-up on grain size/refinement and porosities in each LALO specimen, sampled from different positions in the fuel foil, was difficult to analyze due to the large standard deviation of these parameters. Finally, evidence of grain refinement by polygonization may be present in these specimens.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Is a Prescribed Fire Sufficient to Slow the Spread of Woody Plants in an Infrequently Burned Grassland? A Case Study in Tallgrass Prairie

In many mesic grasslands, such as the central Great Plains in North America, frequent fire is a key regulator of ecological processes. Long periods of infrequent fire facilitate the conversion of herbaceous-dominated grassland to woody-dominated shrubland or woodland. At the Konza Prairie Biological Station in northeast Kansas, one infrequently burned portion of the landscape has undergone transformation from grassland to woodland after nearly 30 yr without fire. In Spring 2017, a prescribed burn was implemented to assess fire effectiveness on woody plant mortality. A postfire census of 3 000+ individual woody plants identified the distribution of species by size (height), topographic position, and slope on the landscape. Mortality and canopy fire damage were calculated for each individual. In lowland locations with near-continuous shrub cover (30.7% of the landscape), woody plants were unaffected by fire. However, in upland and slope locations, where shrubs and trees were sparser, survival probability varied by topographic position and species. In these locations 68% of all woody individuals experienced 90% or greater fire damage to the canopy, with 56% of these individuals exhibiting new canopy regrowth within 2 mo after the fire. Here, the two most abundant woody shrubs, Cornus drummondii and Rhus aromatica, showed high survival at all height classes and landscape positions. The two abundant tree species, Gleditsia triacanthos and Juniperus virginiana, showed increased survival probability with tree height that varied by landscape position. Survival of J. virginiana also varied according to proximity and size of neighboring clonal shrubs, providing a mechanism for persistence of this fire-sensitive tree species even at small height classes. The probability survival curves developed here are useful for managers assessing when to prescribe fire to maximize mortality for J. virginiana and provide insight relevant for broader ecological understanding of woody encroachment within grasslands throughout the world.

54 ENVIRONMENTAL SCIENCES↗

Thermochemical Transformation of Calcium during Biomass Burning and the Effects on Postfire Aqueous Dissolution of Macronutrients

Calcium is commonly the most abundant element in fire residues and its speciation largely determines the geochemical properties of fire residues and their effects on postfire soil chemistry. To explore the effects of biomass composition and fire conditions on ash Ca speciation, this study characterizes the speciation of Ca in charcoal and ash samples that were derived from different plant compartments and thermal conditions, using Ca K-edge X-ray absorption near edge spectroscopy. Results showed that biomass contains abundant organic Ca complexes, which were mineralized into fairchildite and calcite after heating at 450 to 600 °C and then CaO, as temperature increased to 750 °C. Apatite could be an abundant Ca species in fire residues if the Ca/P molar ratio of the biomass is small (<2). The mineralization of organic Ca to the identified Ca minerals during burning was negligibly affected by the oxygen level. Calcium speciation in prescribed fire residues resembled that of biomass ash burned at 550 °C with similar Ca/P molar ratios. Batch experiments showed that macronutrients (Ca, Mg, K, and P) were differentially released, as a result of different solubility of minerals in ashes and reprecipitation of minerals. The aqueous solubility of Ca, Mg, and P decreased as pH increased from 5 to 9, while K showed no pH dependency and was almost completely soluble. Results from this study improve our understanding of the chemistry of fire residues and their geochemical behaviors, which can help evaluate the impact of fire on postfire soil properties and macronutrient cycling.

36 MATERIALS SCIENCE↗

How Well Does the Hole-Burning Action Spectrum Represent the Site-Distribution Function of the Lowest-Energy State in Photosynthetic Pigment–Protein Complexes?

Here for the first time, we combined Monte-Carlo and nonphotochemical hole burning (NPHB) master equation approaches to allow for ultra-high resolution (<0.005 cm -1 , smaller than the typical homogeneous line widths at 5 K) simulations of the NPHB spectra of dimers and trimers of interacting pigments. These simulations reveal significant differences between the zero-phonon hole (ZPH) action spectrum and the site-distribution function (SDF) of the lowestenergy state. The NPHB of the lowest-energy pigment, following the excitation energy transfer (EET) from the higher-energy pigments which are excited directly, results in the shifts of all excited states. These shifts affect the ZPH action spectra and EET times derived from the widths of the spectral holes burned in the donor-dominated regions. The effect is present for a broad variety of realistic anti-hole functions and it is maximal at relatively low values of inter-pigment coupling (V ≤ 5 cm -1 ) where the use of the Förster approximation is justified. These findings need to be considered in interpreting various optical spectra of photosynthetic pigment-protein complexes for which SDFs (describing the inhomogeneous broadening) are often obtained directly from the ZPH action spectra. Water-soluble chlorophyll-binding protein (WSCP) was considered as an example.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Extreme Molecular Complexity Resulting in a Continuum of Carbonaceous Species in Biomass Burning Tar Balls from Wildfire Smoke

Biomass burning emits a wide range of carbonaceous particles into the atmosphere and has negative impacts on human health and the Earth’s radiative balance. Nonvolatile spherical organic aerosol particles, commonly known as tar balls, represent one of the most abundant particles in aged biomass burning smoke. However, the detailed molecular-level composition of ambient tar balls is largely unknown but critical to access their environmental impacts. Ambient aerosol samples collected during a wildfire event, which were ~90% tar balls by number fraction, were analyzed using ultrahigh resolution Orbitrap Elite mass spectrometry with four complementary ionization modes. Our results show the molecular composition of tar balls to be complex, composed of over 10,000 molecular formulas. Model estimated saturation mass concentrations and relative humidity dependent glass transition temperatures were consistent with low volatility and solid morphology as expected for tar balls. Room-temperature evaporation kinetics showed that these particles were composed of ~90% non-volatile species. The molecular complexity detected here signifies a continuum of carbonaceous species, ranging from C3 to C45 with continuous ranges of oxygenation and hydrogen saturation for each Cn. Approximately 24% of molecular formulas were estimated the be highly aromatic, which could indicate chemical compounds with negative health effects, and which may contribute to visible light absorption. The carbon continuum observed here has significant implications for the molecular characterization of atmospheric organic matter. The level of complexity detected here should not be ignored in future studies and we demonstrate that multiple analytical methods may be required to suitably interpret this complexity on a molecular level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multiphase Processing of the Water-Soluble and Insoluble Phases of Biomass Burning Organic Aerosol

Biomass burning is one of the most significant sources of organic aerosol in the atmosphere. Biomass burning organic aerosol (BBOA) has been observed to undergo liquid– liquid phase separation (LLPS) to give core–shell morphology with the hydrophobic phase encapsulating the hydrophilic phase, potentially impacting the evolution of light-absorbing components, i.e., brown carbon (BrC), through multiphase processes. Here, we demonstrate how multiphase processing differs between the watersoluble (i.e., hydrophilic) and insoluble (i.e., hydrophobic) phases of BBOA in terms of reactive uptake of ozone in a coated-wall flow tube. Effects of relative humidity (RH) and ultraviolet (UV) irradiation were investigated. Experimental timeseries were used to inform simulations using multilayer kinetic modeling. Among non-irradiated thin films, the uptake coefficient was greatest for the water-soluble phase at 75% RH (3 × 10 –5 , corresponding to a diffusion coefficient of BrC, D BrC , of 3 × 10 –9 cm 2 s –1 ) and least for the same phase at 0% RH (1 × 10 –5 , corresponding to D BrC of 1 × 10 –10 cm 2 s –1 ). The uptake coefficient for the water-insoluble phase fell between these two (about 1.5 × 10 –5 ), regardless of RH, and the corresponding D BrC increased only slightly (8 × 10 –10 cm 2 s –1 at 0% RH to 9 × 10 –10 cm 2 s –1 at 75% RH). The uptake coefficients of both phases at 0% RH decreased significantly after UV irradiation, consistent with a transition from viscous liquid to solid and supported by qualitative microscopy observations. Modeling multiphase ozone oxidation of primary BrC components in the atmosphere demonstrated, first, that LLPS may extend the lifetime of water-soluble BBOA encapsulated by water-insoluble species by a factor of 1.5 at moderate to high RH and, also, that UV irradiation may extend the lifetime of both phases by more than a factor of 2.5.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of the Distributions of Energy or Charge Transfer Rates on Spectral Hole Burning in Pigment-Protein Complexes at Low Temperatures

Effects of the distributions of excitation energy transfer (EET) rates (homogeneous line widths) on the nonphotochemical (resonant) spectral hole burning (SHB) processes in photosynthetic chlorophyll-protein complexes (reaction center [RC] and CP43 antenna of Photosystem II from spinach) are considered. It is demonstrated that inclusion of such a distribution results in somewhat more dispersive hole burning kinetics. More importantly, however, inclusion of the EET rate distributions strongly affects the dependence of the hole width on the fractional hole depth. Different types of line width distributions have been explored, including those resulting from Foerster type EET between weakly interacting pigments as well as Gaussian ones, which may be a reasonable approximation for those resulting, for instance, from so-called extended Foerster models. For Gaussian line width distributions, it is possible to determine the parameters of both line width and tunneling parameter distributions from SHB data without a priori knowledge of any of them. Concerning more realistic asymmetric distributions, we demonstrate, using the simple example of CP43 antenna, that one can use SHB modeling to estimate electrostatic couplings between pigments and support or exclude assignment of certain pigment(s) to a particular state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sensitivity of Grass Fires Burning in Marginal Conditions to Atmospheric Turbulence

Abstract Atmospheric forcing and interactions between the fire and atmosphere are primary drivers of wildland fire behavior. The atmosphere is known to be a chaotic system that, although deterministic, is very sensitive to small perturbations to initial conditions. We assume that as a result of the tight coupling between fire and atmosphere; wildland fire behavior, in turn, should also be sensitive to perturbations in atmospheric initial conditions. Observations suggest that low intensity prescribed fire, in particular, is susceptible to small perturbations in the wind field, which can significantly alter fire spread. Here, we employ a computational fluid dynamics model of coupled fire‐atmosphere interactions to answer the question: How sensitive is fire behavior to small variations in atmospheric turbulence? We perform ensemble simulations of fires in homogenous grass fuels. The only difference between ensemble members is the state of the turbulent atmosphere provided to the model throughout the simulation. The atmospheric state is a function of the initial conditions applied at the start of the simulation and boundary conditions applied throughout the simulation. We find a wide range of outcomes, with area burned ranging from 2,212 to 11,236 m 2 (>400% change), driven primarily by sensitivity to initial conditions, with nonnegligible contributions from boundary condition variability during the initial 30 s of simulation. Our results highlight the need for ensemble simulations, especially when considering fire behavior in marginal burning conditions.

54 ENVIRONMENTAL SCIENCES↗

Seasonal Variability in Local Carbon Dioxide Biomass Burning Sources Over Central and Eastern US Using Airborne In Situ Enhancement Ratios

We present observations of local enhancements in carbon dioxide (CO 2 ) from local emissions sources over three eastern US regions during four deployments of the Atmospheric Carbon Transport-America (ACT-America) campaign between summer 2016 and spring 2018. Local CO 2 emissions were characterized by carbon monoxide (CO) to CO 2 enhancement ratios (i.e., ΔCO/ΔCO 2 ) in air mass mixing observed during aircraft transects within the planetary boundary layer. By analyzing regional-scale variability of CO 2 enhancements as a function of ΔCO/ΔCO 2 enhancement ratios, observed relative contributions to CO 2 emissions were separated into fossil fuel and biomass burning (BB) regimes across regions and seasons. CO 2 emission contributions attributed to biomass burning (ΔCO/ΔCO 2 > 4%) were negligible during summer and fall in all regions but climbed to ∼9%–11% of observed combustion contributions in the South during winter and spring. Relative CO 2 fire emission trends matched observed winter and spring BB contributions, but conflictingly predicted similar levels of BB during the fall. Satellite fire data from MODIS and VIIRS suggested the use of higher spatial resolution fire data that might improve modeled BB emissions but were not able to explain the bulk of the discrepancy.

54 ENVIRONMENTAL SCIENCES↗

Topological Relationship-Based Flow Direction Modeling: Stream Burning and Depression Filling

Flow direction modeling consists of (a) an accurate representation of the river network and (b) digital elevation model (DEM) processing to preserve characteristics with hydrological significance. In part 1 of our study, we presented a mesh-independent approach to representing river networks on different types of meshes. This follow-up part 2 study presents a novel DEM processing approach for flow direction modeling. This approach consists of (a) a topological relationship-based hybrid breaching-filling method to conduct stream burning for the river network and (b) a modified depression removal method for rivers and hillslopes. Our methods reduce modifications to surface elevations and provide a robust two-step procedure to remove local depressions in DEM. They are mesh-independent and can be applied to both structured and unstructured meshes. We applied our new methods with different model configurations to the Susquehanna River Basin. The results show that topological relationship-based stream burning, and depression-filling methods can reproduce the correct river networks, providing high-quality flow direction and other characteristics for hydrologic and Earth system models.

54 ENVIRONMENTAL SCIENCES↗

Model Sensitivities of Biomass-Burning Aerosol Chemical Aging, Sulfate Formation, and Cloud Droplet Activation in the Southeastern Atlantic Using CESM and E3SM

Biomass-burning smoke drives large uncertainty in climate projections of the Earth's radiative balance. This is due to the chemical and physical evolution of smoke and its impact on clouds and radiation. Here we focus on the southeastern Atlantic region and its inflow of African biomass-burning smoke during August 2017. We evaluate smoke properties and processes in two coupled earth-system models, the Energy Exascale Earth System Model (E3SM) and Community Earth System Model (CESM). These are compared against in situ aircraft observations from two field campaigns, ObseRvations of Aerosols above CLouds and their intEractionS (ORACLES) and CLoud–Aerosol–Radiation Interaction and Forcing: Year 2017 (CLARIFY-2017). Observations reveal an increase and subsequent decrease in smoke mean diameter, and a steady decrease in the mass ratio of organic aerosol (OA) to black carbon aerosol (BC) (OA:BC) over 4–12 days of aging, neither captured by the base models. Implementation of a photolytic loss scheme for secondary organic aerosol (SOA)—as a proxy for other heterogeneous volatilization chemistry—and a ∼1-day conversion for primary OA to SOA significantly improves the representation of this loss. In the boundary layer, both models show dimethyl sulfide driving a large increase in the sulfate aerosol mass fraction from the free troposphere, which is consistent with observations. Finally, models tend to underpredict cloud droplet number concentration partially due to weak modeled turbulent updraft strength, and model performance improves when the parameterized turbulent updraft strength is increased substantially. These results are expected to provide insights into future model development to reduce climate model uncertainties.

54 ENVIRONMENTAL SCIENCES↗

Burned forests impact water supplies

Wildland fire impacts on surface freshwater resources have not previously been measured, nor factored into regional water management strategies. But, large wildland fires are increasing and raise concerns about fire impacts on potable water. Here we synthesize long-term records of wildland fire, climate, and river flow for 168 locations across the United States. We show that annual river flow changed in 32 locations, where more than 19% of the basin area was burned. Wildland fires enhanced annual river flow in the western regions with a warm temperate or humid continental climate. Wildland fires increased annual river flow most in the semi-arid Lower Colorado region, in spite of frequent droughts in this region. In contrast, prescribed burns in the subtropical Southeast did not significantly alter river flow. These extremely variable outcomes offer new insights into the potential role of wildfire and prescribed fire in regional water resource management, under a changing climate.

Science & Technology - Other Topics↗

Design of inertial fusion implosions reaching the burning plasma regime

Abstract In a burning plasma state 1–7 , alpha particles from deuterium–tritium fusion reactions redeposit their energy and are the dominant source of heating. This state has recently been achieved at the US National Ignition Facility 8 using indirect-drive inertial-confinement fusion. Our experiments use a laser-generated radiation-filled cavity (a hohlraum) to spherically implode capsules containing deuterium and tritium fuel in a central hot spot where the fusion reactions occur. We have developed more efficient hohlraums to implode larger fusion targets compared with previous experiments 9,10 . This delivered more energy to the hot spot, whereas other parameters were optimized to maintain the high pressures required for inertial-confinement fusion. We also report improvements in implosion symmetry control by moving energy between the laser beams 11–16 and designing advanced hohlraum geometry 17 that allows for these larger implosions to be driven at the present laser energy and power capability of the National Ignition Facility. These design changes resulted in fusion powers of 1.5 petawatts, greater than the input power of the laser, and 170 kJ of fusion energy 18,19 . Radiation hydrodynamics simulations 20,21 show energy deposition by alpha particles as the dominant term in the hot-spot energy balance, indicative of a burning plasma state.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A helium-burning white dwarf binary as a supersoft X-ray source

Abstract Type Ia supernovae are cosmic distance indicators 1,2 , and the main source of iron in the Universe 3,4 , but their formation paths are still debated. Several dozen supersoft X-ray sources, in which a white dwarf accretes hydrogen-rich matter from a non-degenerate donor star, have been observed 5 and suggested as Type Ia supernovae progenitors 6–9 . However, observational evidence for hydrogen, which is expected to be stripped off the donor star during the supernova explosion 10 , is lacking. Helium-accreting white dwarfs, which would circumvent this problem, have been predicted for more than 30 years (refs. 7,11,12 ), including their appearance as supersoft X-ray sources, but have so far escaped detection. Here we report a supersoft X-ray source with an accretion disk whose optical spectrum is completely dominated by helium, suggesting that the donor star is hydrogen-free. We interpret the luminous and supersoft X-rays as resulting from helium burning near the surface of the accreting white dwarf. The properties of our system provide evidence for extended pathways towards Chandrasekhar-mass explosions based on helium accretion, in particular for stable burning in white dwarfs at lower accretion rates than expected so far. This may allow us to recover the population of the sub-energetic so-called Type Iax supernovae, up to 30% of all Type Ia supernovae 13 , within this scenario.

Science & Technology - Other Topics↗