SEARCH · Engineering Papers

Results for “BENDING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

All sources NASA NTRS DOE OSTI

NASA NTRS1975

Prevention of thermal bending of multilayered beams and plates

By adding an extra layer to multilayer beams or plates of different isotropic materials, it is possible to prevent the thermal bending of these materials. With the proper selection of thermoelastic properties the curvature produced prior to this addition would be eliminated. Several numerical examples are presented for various temperature distributions. A simple experiment was conducted, involving the addition of a brass strip to a bimetallic strip made of aluminum and steel at room temperature. The trimetal strip was placed in a furnace and remained straight for varying temperatures.

Yang, J. C. S.↗

NASA NTRS1975

Bending stresses in spherically hollow ball bearing and fatigue experiments

Spherically hollow balls of 21.7, 50.0 and 56.5 per cent mass reduction have been operated in ball bearings and in a 5-ball fatigue tester with differing outcomes. Available theoretical and experimental treatments of stresses in spherically hollow balls are reviewed and compared. Bending stresses are estimated for these spherically hollow balls to better understand the differences in ball bearing and fatigue test experience.

Nypan, L. J.↗

NASA NTRS1976

A study of sound transmission in curved duct bends by the Galerkin method

A computational procedure based on the Galerkin method is developed to study the sound transmission and reflection characteristics of circularly curved bends of rectangular ducts. This procedure is adaptable to routine computer calculation. An important component of the computer program consists of a QR iterative algorithm which solves the matrix eigenvalue problem generated by the Galerkin method. The present procedure produced very satisfactory convergent results when applied even to cases where the incident wave has high frequency and high wave mode numbers. Some properties of the Galerkin solution are investigated. Its relationship to the classical solution by the method of separation of variables is discussed.

Tam, C. K. W.↗

NASA NTRS1977

Allowable bending loads for mechanical fasteners

Modified shear-loading setup is used to determine allowable shear bending loads on mechanical fasteners. System reduces number of tests required for direct analysis of fasteners to two.

Ferdie, R. D.↗

NASA NTRS1976

A note on the bending of a cracked strip

A technique is described for calculating the stress intensity factors in a strip under bending by treating the strip as a two-dimensional continuum rather than a simple beam in evaluating the crack surface tractions used for the solution of the perturbation problem.

Erdol, R.↗

NASA NTRS1977

Load-displacement measurement and work determination in three-point bend tests of notched or precracked specimens

Suggestions for testing of notched or cracked three-point bend specimens are presented which: (1) correct displacement measurement errors resulting from misalignment between the load applicator and specimen; (2) account for coincidental strains not associated with the work of crack extension; (3) simplify record analysis and processing; and (4) extend displacement gage range without sacrifice of sensitivity or accuracy. These testing details are particularly applicable to procedures in which the crack extension force is determined from the work done on the specimen.

Buzzard, R. J.↗

NASA NTRS1977

Femur-bending properties as influenced by gravity. I - Ultimate load and moment for 3-G rats

Fresh experimental bones can withstand greater bending forces and moments after 1.0 to 2.5 weeks of 3-G exposure. This appears more attributable to a 50% greater strength of bone material than to effects upon size or shape, and is most measurable for animals of 5 to 8 weeks of age. Experimental bone material seems to grow to its mature level at a younger age rather then there being so marked an effect upon the mature level itself. We simulated 3.1 G by chronic centrifugation of 66 albino rats and compared them to 63 1-G controls. Extrapolation of the simplest mathematical description of the present results to weaker, zero-G bones could be tested by a total of 60 space-based control and experimental animals. A flight of only 15 animals would be necessary for comparison to ground-based control animals. This is consistent with reports of bone demineralization during space-flight. In light of the differences in bone histology, however, extrapolation of these results to humans would be premature and, if at all applicable, are most likely to be so for children rather than adults.

Wunder, C. C.↗

NASA NTRS1976

Plane-stress fracture of compact and notch-bend specimens

Thin-gaged or high toughness materials containing cracks usually fail in a ductile manner with nominal failure stresses approaching the ultimate strength of the material. For such materials, a two-parameter fracture criterion was developed. An equation which related the linear elastic stress-intensity factor, elastic nominal stress, and two material parameters has previously been derived and has been used as a fracture criterion for surface- and through-cracked specimens under tensile loading. In the present paper the two-parameter fracture criterion was rederived in a more general form and was extended to compact and notch-bend fracture specimens. A close correlation was found between experimental and calculated failure stresses.

Newman, J. C., Jr.↗

NASA NTRS1977

Estimation of K/Ic/ from slow bend precracked Charpy specimen strength ratios

Data are presented concerning strength ratios which have been derived from slow bend tests on 0.25-in.-thick precracked Charpy specimens of steels, aluminum alloys, and a titanium alloy for which valid K(Ic) values have been established. The K(Ic) values considered are plane strain fracture toughness values as defined in the ASTM Method E 399-74. The strength ratios are used to develop calibration curves which could be useful in estimating K(Ic) for the purposes of alloy development or quality control.

Succop, G.↗

NASA NTRS1978

Void-free bends in laminated structures

Layup technique involving repositioning of filler plies and redesigning of bleeder pressure pad reduces wrinkles, voids, pores, and other defects at sharp bends in laminated materials.

Rice, S. W.↗

NASA NTRS1978

Comparison of wing-span averaging effects on lift, rolling moment, and bending moment for two span load distributions and for two turbulence representations

An analytical method of computing the averaging effect of wing-span size on the loading of a wing induced by random turbulence was adapted for use on a digital electronic computer. The turbulence input was assumed to have a Dryden power spectral density. The computations were made for lift, rolling moment, and bending moment for two span load distributions, rectangular and elliptic. Data are presented to show the wing-span averaging effect for wing-span ratios encompassing current airplane sizes. The rectangular wing-span loading showed a slightly greater averaging effect than did the elliptic loading. In the frequency range most bothersome to airplane passengers, the wing-span averaging effect can reduce the normal lift load, and thus the acceleration, by about 7 percent for a typical medium-sized transport. Some calculations were made to evaluate the effect of using a Von Karman turbulence representation. These results showed that using the Von Karman representation generally resulted in a span averaging effect about 3 percent larger.

Lichtenstein, J. H.↗

NASA NTRS1978

Load-displacement measurement and work determination in three-point bend tests of notched or precracked specimens

Suggestions for testing of notched or cracked three-point bend specimens are presented that (1) correct displacement measurement errors resulting from misalignment between the load applicator and specimen; (2) account for coincidental strains not associated with the work of crack extension; (3) simplify record analysis and processing; and (4) extend displacement gage range without sacrifice of sensitivity or accuracy. These testing details are particularly applicable to procedures in which the crack extension force J(I) is determined from the work done on the specimen.

Buzzard, R. J.↗

NASA NTRS1977

Great Bend tornadoes of August 30, 1974

Photogrammetric analyses of movies and still pictures taken of the Great Bend, Kansas Tornado series have been used to develop design specifications for nuclear power plants and facilities. A maximum tangential velocity of 57 m/sec and a maximum vertical velocity of 27 m/sec are determined for one suction vortex having a translational velocity of 32 m/sec. Three suction vortices with radii in the 20 to 30 m range are noted in the flow field of one tornado; these suction vortices apparently form a local convergence of inflow air inside the outer portion of the tornado core.

Umenhofer, T. A.↗

NASA NTRS1978

An elastic-perfectly plastic analysis of the bending of the lithosphere at a trench

A number of authors have modeled the flexure of the lithosphere at an oceanic trench using a thin elastic plate with a hydrostatic restoring force. In some cases good agreement with observed topography is obtained but in other cases the slope of the lithosphere within the trench is greater than that predicted by the elastic theory. In this paper the bending of a thin plate is considered using an elastic-perfectly plastic rheology. It is found that the lithosphere behaves elastically seaward of the trench, but that plasticity decreases the radius of curvature within the trench. The results are compared with a number of observed trench profiles. The elastic-perfectly plastic profiles are in excellent agreement with those profiles that deviate from elastic behavior.

Turcotte, D. L.↗

NASA NTRS1979

Accurate determination of work in three-point bend tests

Article presents procedure where correction curve accounts for coincidental displacement and simplifies data analysis in three point bend test in field of materials testing. Method is applicable to any test in above field regardless of load displacement.

Buzzard, R. J.↗

NASA NTRS1979

Improved displacement measurement in bend testing

Removable spacers extend displacement range and increase accuracy. Innovation is needed to accurately measure displacement between ram and load applicator of compression testing machine during bend testing.

Buzzard, R. J.↗

NASA NTRS1976

LOADS: a computer program for determining the shear, bending moment and axial loads for fuselage type structures

LOADS determines rigid body vehicle shears, bending moments and axial loads on a space vehicle due to aerodynamic loads and propellant inertial loads. An example hand calculation is presented and was used to check LOADS. A brief description of the program and the equations used are presented. LOADS is operational on the Univac 1110, occupies 10505 core and typically takes less than one(1) second of CAU time to execute.

Nolte, W. E.↗

NASA NTRS1979

Bend strengths of reaction bonded silicon nitride prepared from dry attrition milled silicon powder

Dry attrition milled silicon powder was compacted, sintered in helium, and reaction bonded in nitrogen-4 volume percent hydrogen. Bend strengths of bars with as-nitrided surfaces averaged as high as 210 MPa at room temperature and 220 MPa at 1400 C. Bars prepared from the milled powder were stronger than those prepared from as-received powder at both room temperature and at 1400 C. Room temperature strength decreased with increased milling time and 1400 C strength increased with increased milling time.

Herbell, T. P.↗