Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Abstracts”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Maximizing the Scientific Return of Low Cost Planetary Missions Using Solar Electric Propulsion(abstract)

After many years of development, solar electric propulsion is now a practical low cost alternative for many planetary missions. In response to the recent Discovery AO, we and a number of colleagues have examined the scientific return from a missioon to map the Moon and then rendezvous with a small body. In planning this mission, we found that solar electric propulsion was quite affordable under the Discovery guidelines, that many targets could be reached more rapidly with solar electric propulsion than chemical propulsion, that a large number of planetary bodies were accessible with modest propulsion systems, and that such missions were quite adaptable, with generous launch windows which minimized mission risks. Moreover, solar electric propulsion is ideally suited for large payloads requiring a large amount of power.

solar electric propulsion low cost missions ion th↗
NASA NTRS1994

(abstract) A Comparison Between Measurements of the F-layer Critical Frequency and Values Derived from the PRISM Adjustment Algorithm Applied to Total Electron Content Data in the Equatorial Region

The Parametrized Real-Time Ionosphere Specification Model (PRISM) is a global ionospheric specification model that can incorporate real-time data to compute accurate electron density profiles. Time series of computed and measured data are compared in this paper. This comparison can be used to suggest methods of optimizing the PRISM adjustment algorithm for TEC data obtained at low altitudes.

total electron content TEC PRISM electron content ↗
NASA NTRS1993

A Deep Space Optical Communications Demonstration with the Galileo Spacecraft on its Way to Jupiter (abstract)

The GOPEX (Galileo Optical communications from an Earth-based transmitter) demonstration was performed from transmitter sites at Table Mountain Observatory, CA and Starfire Optical Range, NM. The experiment was done over an eight day period, December 9 through December 16 as Galileo receded from Earth on its way to Jupiter. At a range of 6 million kilometers (15 times the Earth-Moon distance), the transmission from Table Mountain Observatory eight days after Earth-flyby represents the longest range for laser transmission and detection.

laser space communications experiment optical comm↗
NASA NTRS1993

(abstract) Interplanetary Lyman-alpha Observations with the Galileo Ultraviolet Spectrometer: Solar Wind Latitude Variations and Multiple Scattering at Solar Maximum

The Galileo Ultraviolet Spectrometer obtained a Lyman-alpha celestrial sphere map on 13,14 December 1990 near the first Earth encounter, with spacecraft near the interstellar wind downwind axis. The data show solar flux longitudinal and latitudinal asymmetries which are modeled with He 10830 Ssolar images. The difference between the observed brightness and a single scattering model is attributed to multiple scattering effects, which we also calculate. The data constrain the solar wind flux latitude variation at solar maximum. Other 1990-1992 Galileo Lyman-alpha data will be discussed.

solar wind ultraviolet spectrometer solar flux cel↗
NASA NTRS1993

(abstract) Spatial Power Spectral Measurements of IR Cirrus

We have used recently released IRAS Sky Survey Atlas (ISSA) image data to investigate the surface brightness distribution of selected regions of infrared cirrus using power spectral analysis techniques.

cirrus infrared IRAS Sky Survey Atlas brightness d↗
NASA NTRS1993

The Application of Microtechnology to Spacecraft On-Board Computing(abstract)

In this report, we will survey recent advances in chip packaging and stacking techniques that allow miniature computers to be developed for space applications. Several orders of magnitude reduction in mass, volume, and power consumption are possible using these techniques. Moreover, performance improvements can be achieved by increasing the scale of multiprocessing. Most importantly, long-term survivability can potentially be improved by increasing the level of redundancy and fault tolerance.

microtechnology computers multiprocessing packagin↗
NASA NTRS1993

Advances in Studies of Electrode Kinetics and Mass Transport in AMTEC Cells (abstract)

Previous work reported from JPL has included characterization of electrode kinetics and alkali atom transport from electrodes including Mo, W, WRh(sub x), WPt(sub x)(Mn), in sodium AMTEC cells and vapor exposure cells, and Mo in potassium vapor exposure cells. These studies were generally performed in cells with small area electrodes (about 1 to 5 cm(sup 2)), and device geometry had little effect on transport. Alkali diffusion coefficients through these electrodes have been characterized, and approximate surface diffusion coefficients derived in cases of activated transport. A basic model of electrode kinetic at the alkali metal vapor/porous metal electrode/alkali beta'-alumina solid electrolyte three phase boundary has been proposed which accounts for electrochemical reaction rates with a collision frequency near the three phase boundary and tunneling from the porous electrode partially covered with adsorbed alkali metal atoms. The small electrode effect in AMTEC cells has been discussed in several papers, but quantitative investigations have described only the overall effect and the important contribution of electrolyte resistance. The quantitative characterization of transport losses in cells with large area electrodes has been limited to simulations of large area electrode effects, or characterization of transport losses from large area electrodes with significant longitudinal temperature gradients. This paper describes new investigations of electrochemical kinetics and transport, particularily with WPt(sub 3.5) electrodes, including the influence of electrode size on the mass transport loss in the AMTEC cell. These electrodes possess excellent sodium transport properties making verification of device limitations on transport much more readily attained.

electrode kinetics alkali atom transport transport↗
NASA NTRS1993

Component Selection, Accelerated Testing, and Improved Modeling of AMTEC Systems for Space Power (abstract)

Alkali metal thermal to electric converter (AMTEC) designs for space power are numerous, but selection of materials for construction of long-lived AMTEC devices has been limited to electrodes, current collectors, and the solid electrolyte. AMTEC devices with lifetimes greater than 5 years require careful selection and life testing of all hot-side components. The likely selection of a remote condensed design for initial flight test and probable use with a GPHS in AMTEC powered outer planet probes requires the device to be constructed to tolerate T greater than 1150K, as well as exposure to Na(sub (g)), and Na(sub (liq)) on the high pressure side. The temperatures involved make critical high strength and chemical resistance to Na containing Na(sub 2)O. Selection among materials which can be worked should not be driven by ease of fabricability, as high temperature stability is the critical issue. These concepts drive the selection of Mo alloys for Na(sub (liq)) containment in AMTEC cells for T to 1150K operation, as they are significantly stronger than comparable NB or Ta alloys, are less soluble in Na(sub (liq)) containing dissolved Na(sub 2)O, are workable compared to W alloys (which might be used for certain components), and are ductile at the T greater than 500K of proposed AMTEC modules in space applications.

AMTEC thermal to electric conversion↗
NASA NTRS1993

(abstract) Low Energy Flux and Spectral Monitoring of Cen A and NGC 4151

We present available BATSE Earth-occultation observations of Cen A (the brightest extragalactic hard X-ray source) and NGC 4151 (the archetypical Seyfert I) from 1991 May through 1992 February, in the 20 keV to 1.5 MeV range. We compare the results with those obtained by OSSE during viewing periods 4 (NGC 4151) and 12 (Cen A). In general Earth-occultation sensitivities achieved by BATSE are a few times poorer than those attainable by OSSE, but sources are observable almost continuously, during all CGRO viewing periods. Data from the two instrumants are thus nicely complementary.

Cen A NGC 4151 X-ray spectra Earth-occultation↗
NASA NTRS2004

Wild2 approach maneuver strategy used for Stardust spacecraft (extended abstract)

Stardust, NASA's first dedicated sample return mission to a comet, successfully flew through the comet dust around Wold2 on January 2, 2004. The spacecraft flew within 236 km of the comet, meeting the mission requirement of 250+/- 50 km on flyby distance. Stardust collected dust particles and took several images of the comet while flying close to Wild2. The spacecraft will return to earth with the comet samples on January 15, 2006. To accomplish the above objective, a large Deep Space Maneuver (DSM#) was implemented during June 17 and 18, 2003 and a series of Trajectory Correction Maneuvers (TCMs) were also implemented during the 30 days prior to encounter. Both maneuver design and executions were influenced by number of factors including the small body ephemeris uncertainty, predictability of small forces arising from 3-axis attitude limit cycling and spacecraft slews. Maneuver design processes, including contingency plans, and maneuver performance characteristics, are discussed in this paper.

dust↗
NASA NTRS2005

Surface structure of an invariant manifold of a Halo Orbit (extended abstract)

We extract the surface structure of the unstable invariant manifold tube projected into position space, of a halo orbit near L2. We do this by using transversal planes to intersect trajectories that approximate the tube. From these intersection points we construct spline-interpolated cross section curves which give a good idea of the structure of the tube. For example, we show that, for the value of (mu) we use, the tube pinches, develops a self-intersection, develops loop-inside-tube structure, pinches some more, and so on. We also construct surfaces made of quadrilaterals and triangles from these cross-sections. The transversal planes are obtained by taking planes orthogonal to a curve that follows the general shape of the tube. One such curve we use, is the unstable invariant manifold of the equilibrium point L2 itself. In another example, we take a circle that follows the tube, as the curve for finding planes transversal to the tube. Our method is complementary to the method of taking cross-sections of constant time (the isochronous method), as used by some other researchers. The isochronous method is good at revealing the temporal structure of trajectories on a tube. However, due to the unequal speeds of different trajectories, it is harder to use for long length surface extraction. In contrast, using our method, we show cross-sections of the tube through an angular extent of nearly (pi) during which the tube becomes extremely convoluted. We also show that tubes of different energies, that start out in certain ordering, do not obey the ordering after a while. Our work is motivated by applications to space mission design.

invariant manifold↗
NASA NTRS2007

Symbolic LTL Compilation for Model Checking: Extended Abstract

In Linear Temporal Logic (LTL) model checking, we check LTL formulas representing desired behaviors against a formal model of the system designed to exhibit these behaviors. To accomplish this task, the LTL formulas must be translated into automata [21]. We focus on LTL compilation by investigating LTL satisfiability checking via a reduction to model checking. Having shown that symbolic LTL compilation algorithms are superior to explicit automata construction algorithms for this task [16], we concentrate here on seeking a better symbolic algorithm.We present experimental data comparing algorithmic variations such as normal forms, encoding methods, and variable ordering and examine their effects on performance metrics including processing time and scalability. Safety critical systems, such as air traffic control, life support systems, hazardous environment controls, and automotive control systems, pervade our daily lives, yet testing and simulation alone cannot adequately verify their reliability [3]. Model checking is a promising approach to formal verification for safety critical systems which involves creating a formal mathematical model of the system and translating desired safety properties into a formal specification for this model. The complement of the specification is then checked against the system model. When the model does not satisfy the specification, model-checking tools accompany this negative answer with a counterexample, which points to an inconsistency between the system and the desired behaviors and aids debugging efforts.

Rozier, Kristin Y.↗
NASA NTRS2008

Abstracts of the Annual Meeting of Planetary Geologic Mappers, Flagstaff, AZ, 2008

Topics discussed include: Merging of the USGS Atlas of Mercury 1:5,000,000 Geologic Series; Geologic Mapping of the V-36 Thetis Regio Quadrangle: 2008 Progress Report; Structural Maps of the V-17 Beta Regio Quadrangle, Venus; Geologic Mapping of Isabella Quadrangle (V-50) and Helen Planitia, Venus; Renewed Mapping of the Nepthys Mons Quadrangle (V-54), Venus; Mapping the Sedna-Lavinia Region of Venus; Geologic Mapping of the Guinevere Planitia Quadrangle of Venus; Geological Mapping of Fortuna Tessera (V-2): Venus and Earth's Archean Process Comparisons; Geological Mapping of the North Polar Region of Venus (V-1 Snegurochka Planitia): Significant Problems and Comparisons to the Earth's Archean; Venus Quadrangle Geological Mapping: Use of Geoscience Data Visualization Systems in Mapping and Training; Geologic Map of the V-1 Snegurochka Planitia Quadrangle: Progress Report; The Fredegonde (V-57) Quadrangle, Venus: Characterization of the Venus Midlands; Formation and Evolution of Lakshmi Planum (V-7), Venus: Assessment of Models using Observations from Geological Mapping; Geologic Map of the Meskhent Tessera Quadrangle (V-3), Venus: Evidence for Early Formation and Preservation of Regional Topography; Geological Mapping of the Lada Terra (V-56) Quadrangle, Venus: A Progress Report; Geology of the Lachesis Tessera Quadrangle (V-18), Venus; Geologic Mapping of the Juno Chasma Quadrangle, Venus: Establishing the Relation Between Rifting and Volcanism; Geologic Mapping of V-19, V-28, and V-53; Lunar Geologic Mapping Program: 2008 Update; Geologic Mapping of the Marius Quadrangle, the Moon; Geologic Mapping along the Arabia Terra Dichotomy Boundary: Mawrth Vallis and Nili Fossae, Mars: Introductory Report; New Geologic Map of the Argyre Region of Mars; Geologic Evolution of the Martian Highlands: MTMs -20002, -20007, -25002, and -25007; Mapping Hesperia Planum, Mars; Geologic Mapping of the Meridiani Region, Mars; Geology of Holden Crater and the Holden and Ladon Multi-Ring Impact Basins, Margaritifer Terra, Mars; Geologic Mapping of Athabasca Valles; Geologic Mapping of MTM -30247, -35247 and -40247 Quadrangles, Reull Vallis Region of Mars; Geologic Mapping of the Martian Impact Crater Tooting; Geology of the Southern Utopia Planitia Highland-Lowland Boundary Plain: First Year Results and Second Year Plan; Mars Global Geologic Mapping: Amazonian Results; Recent Geologic Mapping Results for the Polar Regions of Mars; Geologic Mapping of the Medusae Fossae Formation on Mars (MC-8 SE and MC-23 NW) and the Northern Lowlands of Venus (V-16 and V-15); Geologic Mapping of the Zal, Hi'iaka, and Shamshu Regions of Io; Global Geologic Map of Europa; Material Units, Structures/Landforms, and Stratigraphy for the Global Geologic Map of Ganymede (1:15M); and Global Geologic Mapping of Io: Preliminary Results.

Bleamaster, Leslie F., III↗