Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AGGLOMERATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36

Preparation and Thermophysical Investigations of CoFe{sub 2}O{sub 4}-based Nanofluid: a Potential Heat Transfer Agent

Cobalt ferrite nanoparticles were synthesized by employing chemical co-precipitation technique. The structure, morphology, elemental composition, and magnetization studies of cobalt ferrite nanoparticles were carried by XRD, FE-SEM, EDS, and VSM techniques, respectively. Rietveld refined XRD pattern exhibited the single-phase cubic spinel structure with Fd-3m space group. FE-SEM images indicated some agglomeration of spherical grains which can be attributed to high surface energy and magnetic interactions. Presence of peaks of respective elements (Co, Fe, and O) in EDS spectrum showed formation of CoFe{sub 2}O{sub 4}. The M–H loop recorded at 300 K revealed superparamagnetic behavior and explained by fine particles size. The blocking temperature of the CoFe{sub 2}O{sub 4}nanoparticles from FC-ZFC curve was found to be 144 K. Cobalt ferrite–ethylene glycol nanofluids of various concentrations 0.0–1.0% in steps of 0.2% were prepared by ultrasonically assisted two-step technique. Thermophysical parameters such as thermal conductivity, specific heat, viscosity, and density were investigated as a function of both volume fraction and temperature. The experimental and theoretical value of each sample was correlated. The thermal conductivity was significantly enhanced with an increase in volume fraction and temperature.

36 MATERIALS SCIENCE↗

Structural, Magnetic, and Photoluminescence Properties of BiFeO{sub 3}: Er-Doped Nanoparticles Prepared by Sol-Gel Technique

A simple sol-gel technique is used to synthesize zero-dimensional pure and Er-doped BiFeO{sub 3} (BFO) nanoparticles. The effect of Er dopant on morphology, structure, optical, magnetic, and photoluminescence properties of single-phase BFO was studied. X-ray diffraction (XRD) studies reveal that the structural phase transformation is noticed from rhombohedral to orthorhombic with substitution of Er to pure BFO. From scanning electron microscopy (SEM) and transmission electron microscopy (TEM), morphology of the synthesized samples were spherical in shape. Agglomeration and particle size reduced with substitution of Er, particle size is around ∼ 30 nm. Energy-dispersive analysis of X-ray (EDAX) spectra confirms the presence of selective elements in synthesized samples. Fourier transform infrared spectra (FTIR) confirms that all the bonds strongly correspond to BFO. The substitution of Er in BFO nanoparticles also demonstrates a strong reduction in optical band-gap energy compared with pure BFO. Magnetization studies were carried out by using vibrating sample magnetometer (VSM), and the saturation magnetization increases with increasing substitution of Er. A photoluminescence (PL) spectrum reveals that the substitution of Er suppressed the recombination of electron-hole pairs.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A Review on Iron Oxide Nanoparticles and Their Biomedical Applications

The iron oxide nanoparticles have a great attraction in biomedical applications due to their non-toxic role in the biological systems. The iron oxide nanoparticles have both magnetic behaviour and semiconductor property which lead to multifunctional biomedical applications. The iron oxide nanoparticles used in biomedical fields such as antibacterial, antifungal and anticancer were reviewed. The uses of hematite (α-Fe{sub 2}O{sub 3}), maghemite (γ-Fe{sub 2}O{sub 3}) and magnetite (Fe{sub 3}O{sub 4}) nanoparticles, for an inhibition time in biological activities, are listed in this work. Also, this review explains the use of iron oxide nanoparticles in the biomedical fields with particular attention to the application of hematite and superparamagnetic iron oxide nanoparticles. In this review, analysis reveals that the role of iron oxide in biological activity is good due to its biocompatibility, biodegradability, ease of synthesis and different magnetic behaviours. The change of properties of iron oxide nanoparticles such as particle size, morphology, surface, agglomeration and electronic properties has specific impact in biomedical application. The review mainly focused in and discussed about antibacterial, anticancer, bone marrow and cell labelling activities. From this review work, the iron oxide nanoparticle may be specialised in particular bacterial and cancer treatments. Also discussed are the iron oxide nanoparticle-specific biomedical applications like human placenta, insulin and retinal locus treatments.

60 APPLIED LIFE SCIENCES↗

Enhanced Magneto-optical and Antibacterial Studies of Bi{sub 1−x}Mg{sub x}FeO{sub 3} (0.0 ≤ x ≤ 0.15)) Nanoparticles

Mg-doped BiFeO{sub 3} (Bi{sub 1−x}Mg{sub x}FeO{sub 3} (0.00 ≤ x ≤ 0.15)) nanoparticles (NPs) have been successfully prepared by simple solution combustion method using urea as fuel. The obtained product was sintered at 550 °C for 2 h to get pure-phase formation. The as-prepared samples were characterized by powder X-ray diffraction (XRD), Fourier transform infrared (FT-IR), field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscope (TEM), ultraviolet–visible (UV-Vis) absorption, photoluminescence (PL) spectra, and vibrating sample magnetometer (VSM) analysis. Powder XRD study revealed that all products exhibit rhombohedral structure with pure-phase formation. The average crystallite size of the samples decreased from 56.25 to 46.15 nm with increasing the concentration of Mg (x = 0.00, 0.05, 0.10, and 0.15). Surface morphology of the samples were analyzed by FE-SEM and TEM micrograph techniques, and the grain distribution was not quite homogeneous and observed agglomeration of the particles, which is mainly due to the magnetic interaction among them. EDX analysis confirmed the presence of Bi, Fe, O, and Mg elements without any form of impurity peak in all products. PL spectra shows a high intense peak at 464 nm, which is attributed to blue emission. The saturation magnetization is enhanced with increasing Mg doping level at RT. Antibacterial activity of Bi{sub 1−x}Mg{sub x}FeO{sub 3} NPs was found to be enhanced with increase in Mg doping concentration as it causes a reduction in the grain size of the samples.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural, Morphological, Raman, and Mössbauer Studies on (La{sub 0.8}Ca{sub 0.2}){sub 1−x}Bi{sub x}FeO{sub 3} (x = 0.0, 0.1, and 0.2) Compounds

(La{sub 0.8}Ca{sub 0.2}){sub 1−x}Bi{sub x}FeO{sub 3} (x = 0.0, 0.1, and 0.2) compounds were prepared by the sol-gel method, using the citric acid route. Structural and microstructural characteristics of the samples were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Raman spectroscopy. Mössbauer spectroscopy was also used for magnetic characterization and structural confirmation of X-ray data. Refinement of XRD patterns indicated that the compounds crystallize in an orthorhombic structure, Pnma space group. The SEM measurements showed that the morphology of the samples is characterized by the existence of large agglomerates, while TEM confirmed the fine particle size. Raman spectra revealed that, when increasing temperature, the level of oxygen species adsorbed at the surface of the particles increases progressively. Room temperature Mössbauer spectroscopy data revealed the existence of two octahedral magnetic sites in the structure of the compounds, which is compatible with XRD data, and a small percentage of a paramagnetic phase in the samples, which increases with Bi-content.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of Nd, Al Doping on the Structure and Properties of BiFeO{sub 3}

The BiFeO{sub 3}(BFO) and Bi{sub 0.95}Nd{sub 0.05}Fe{sub 1-x}Al{sub x}O{sub 3} (x = 0, 0.03, 0.05, 0.075, 0.1) powders were prepared at 200 °C for 24 h by hydrothermal method. The effects of Al doping content on the structure, morphology, magnetic, and photocatalytic properties were studied. X-ray diffraction (XRD) and Fourier transform infrared spectrometer (FTIR) demonstrated the compounds are distorted rhombohedral perovskite structure without any other heterogeneity and structural transition. Field emission scanning electron microscope (FESEM) reflected surface of compounds is a dense, agglomerated sphere. As the concentration of Al{sup 3+} increases, a small part of the spherical crystallites eventually becomes cauliflower shape. Energy-dispersive X-ray (EDS) showed the Bi{sub 0.95}Nd{sub 0.05}Fe{sub 0.95}Al{sub 0.05}O{sub 3} sample mainly consists of five elements (Bi, Fe, O, Nd, Al) and atom radio matched well with the formula. Vibrating sample magnetometer (VSM) integrated in a physical property measurement system (PPMS-9) illustrated introducing Nd{sup 3+} ions into BFO will enhance its magnetism at room temperature. However, with the increase of non-magnetic ion Al{sup 3+} concentration in Bi{sub 0.95}Nd{sub 0.05}Fe{sub 1-x}Al{sub x}O{sub 3} (x = 0, 0.03, 0.05, 0.075, 0.1), the network structure of Fe-O-Fe was destroyed, which led to the decrease of its net magnetization, so that the hysteresis loop shows paramagnetism. The photocatalytic performance of BFO increased initially and decreased afterwards as Al{sup 3+} concentration increased, and the best catalytic performance was achieved at x = 0.05.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic Mesocellular Foam Functionalized by Curcumin for Potential Multifunctional Therapeutics

The study investigates curcumin/SPIONs hybridized mesocellular foam type silica for potential dual purpose of drug delivery (curcumin) and magnetic resonance imaging. Magnetization capability and curcumin release was assessed for different structured silica such as spherical silica (Q-10), Si-MCM-41, Si-SBA-16, mesocellular foam (MSU-Foam), Si-KIT-6, ULPFDU-12, and silicalite. The phase, textural, and morphological variation was systematically scrutinized using various physico-chemical techniques. Ten weight percent SPIONs loading was found to generate magnetically active SPIONs in the following order: Q-10 (1.44 emu/g) > SBA-16 (0.80 emu/g) > MSU-Foam (0.24 emu/g) > Si-MCM-41 (0.07 emu/g) > Si-KIT-6 (0.07 emu/g) > silicalite (0.08 emu/g), respectively. The iron oxide dispersion, specific surface area, and porosity play a major role in various structured silicas. MSU-Foam with wormhole structure showed highest specific surface area occupation of SPIONs (73%). The presence of interconnected porosity of foam tends to generate external agglomeration of SPIONs (7–18 nm) at the pore surface contributing to expansion of pore sizes from 16.4 to 40.2 nm. The SPIONs over spherical micron-sized silica Q-10 showed the formation of large nanoclusters (10–25 nm). Thirty to 390 μg/ml of curcumin was loaded over silica and SPIONs/silica structured hybrid, and drug release was studied at pH 5.6 for 72 h. SPIONs/MSU-Foam with less magnetization showed the highest cumulative curcumin release (53.2%), while Q-10 spherical silica with high magnetization property showed less cumulative release of curcumin (12%).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of Synthesis Temperature on Structural, Optical, and Magnetic Properties of ZnO Nanoparticles Synthesized by Combustion Method

ZnO nanoparticles at different temperatures were synthesized by using the combustion method. The effect of synthesis temperature on the properties of the nanoparticles was studied by using XRD, FESEM, EDS, TEM, photoluminescence (PL), Raman, diffuse reflectance spectra (DRS), and VSM characterization techniques. The XRD results reveal that the grown nanoparticles have a hexagonal wurtzite structure without any impurities and agreed with EDS results. FESEM and TEM micrographs show that the ZnO nanoparticles possess a spherical shape with agglomeration free, and the size increases with increase of synthesis temperature. From DRS studies, it was noticed that the band gap decreases with increase of synthesis temperature. In PL studies, blue peak at 465 nm may be due to defect-related transitions. A sharp intense peak in Raman spectra at 485 cm{sup −1} represents E{sub 2}H mode is a characteristic of a hexagonal wurtzite structure. The magnetic studies show that the magnetization decreases from 0.0172 to 0.0042 emu/g as the synthesis temperature increases from 400 to 550 °C. ZnO synthesized at 500 °C has a large squareness ratio. These materials are potential candidates for memory devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Spin Glass Behavior in La{sub 0.7}Ca{sub 0.23}Sr{sub 0.07}MnO{sub 3} Nanofibers Obtained by Electrospinning

This work contributes to the development of new nanostructured mixed valence manganites and to explore and optimize their magnetic properties at 1-D level. Nanofibers of La{sub 0.7}Ca{sub 0.23}Sr{sub 0.07}MnO{sub 3} manganite were fabricated using the electrospinning method and three different heat treatments to determine how the nanostructure affects its thermomagnetic behavior. From scanning electron microscopy, nanofibers morphology was observed and average diameters of 75, 94, and 97 nm were identified after heat treatments of 973, 1073, and 1173 K, respectively. According to X-ray diffraction technique, a single-phase orthorhombic structure was defined for each sample. Average crystallite sizes were determined as 47, 49, and 58 nm. A ferromagnetic to paramagnetic transition with Curie temperatures of 297, 305, and 314 K were identified, respectively. Furthermore, a glassy state was induced by nanofibers agglomeration. The spin glass and irreversible temperatures diminished as the magnetic field was increased and a highly anisotropic state was evidenced for all samples. Thermomagnetic behavior in manganites showed to be significantly influenced by the one-dimensional structure and exposed how the dimensionality proportionated by the fabrication method can be used to adjust magnetic properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural, Optical, and Dielectric Studies on Sr-Doped Biferroic YCrO{sub 3}

In this work, the solid-state synthesis of Y{sub 1-x}Sr{sub x}CrO{sub 3} (x = 0.0, 0.1) samples has been reported. The X-ray diffraction data analysis confirmed that the synthesized samples have crystallized into the orthorhombic phase with the assigned space group Pbnm. The Rietveld refinement of the XRD data confirmed the structure and other related parameters. The slight variation in the lattice parameters and negligible shift in the reflection peaks reveals the uniform dispersion of Sr at Y-site in the parent YCrO{sub 3} matrix. The dielectric characterization revealed the good dielectric nature of the prepared samples which decreases with Sr doping. Field emission scanning electron microscopy (FE-SEM) revealed that an agglomeration type process has taken place in the sample preparation. Fourier transform infrared (FTIR) characterization witnessed the formation of orthorhombic phase of the samples under study displaying sharp absorption bands corresponding to Cr–O stretching, Y/Sr–O stretching, and O–Cr–O deformation vibration, respectively. UV-Vis spectroscopy analysis revealed the dual direct allowed bandgap of the samples assigned to the Cr{sup 3+} ion transition in the ground level.

36 MATERIALS SCIENCE↗

Influence of Annealing on Microstructure, Electrochemical, and Magnetic Properties of Co-Doped SrTiO{sub 3} Nanocubes

Effect of annealing on microstructure, electrochemical, and magnetic properties of Co-doped SrTiO{sub 3} nanocubes obtained by the hydrothermal method was studied. X-ray diffraction (XRD) results of all as-prepared and annealed Co-doped SrTiO{sub 3} samples revealed a cubic perovskite structure with the second phases of SrCO{sub 3} and Co{sub 3}O{sub 4}in as-prepared and annealed SrTi{sub 0.90}Co{sub 0.10}O{sub 3} samples, respectively. Agglomerated nanocubes could be clearly observed in all as-prepared and annealed Co-doped samples by scanning electron microscope (SEM) and transmission electron microscope (TEM). X-ray absorption near edge spectroscopy (XANES) results suggested the presence of Co{sup 2+} cations in as-prepared Co-doped SrTiO{sub 3} samples, while both of Co{sup 2+} and Co{sup 3+} cations were found in annealed Co-doped SrTiO{sub 3} samples. The cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) results of as-prepared and annealed SrTi{sub 1-x}Co{sub x}O{sub 3} (x = 0.05, 0.075 and 0.10) electrodes revealed pseudocapacitor behavior of the Faradaic redox reaction type. The specific capacitance (Csc) was affected by the increase of Co content in all as-prepared and annealed Co-doped SrTiO{sub 3} samples with an excellent cycling stability after 200 cycle test of 97.24% and the highest value of 75.28 F g{sup −1} at 1 A g{sup −1} in an annealed SrTi{sub 0.925}Co{sub 0.075}O{sub 3} electrode. Magnetization measurements at room temperature using vibrating sample magnetometer (VSM) revealed diamagnetic behavior of as-prepared SrTiO{sub 3} sample, whereas paramagnetic behavior was observed in all as-prepared Co-doped SrTiO{sub 3} samples. After annealing, undoped sample exhibited paramagnetic behavior, whereas ferromagnetic behavior was observed in all Co-doped SrTiO{sub 3} samples with the increase of saturation magnetization (M{sub s}) at 10 kOe from 0.58 to 1.63 emu/g and the coercive field (H{sub c}) from 43.71 to 123.87 Oe, suggested to originate from the face-center exchange (FCE) mechanism.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Compatibility of mesophase pitch and linear low-density polyethylene for low-cost carbon fiber

Mesophase pitch and linear low-density polyethylene (LLDPE) were blended by shear mixing and extruded producing precursor fibers which were then converted to carbon fibers (CFs). LLDPE additives agglomerate within the isotropic spheres rather than uniformly dispersing throughout the entire matrix. The blends possess different thermal properties and precursor tensile properties evident by two-phase tensile stress nature not present in precursor fibers produced from pure pitch. The resultant CFs were oxidized at 280 °C for 4 h and carbonized at 1000 °C for 15 min. This process created pitch CFs with a tensile strength of 1.23 GPa and a Young’s modulus of 99 GPa. All CFs produced from blends of pitch and LLDPE possessed a tensile strength of 0.63 GPa and less. These CFs showed a microstructure slightly different from the pure pitch CFs with fractured CF cross sections revealing voids present in all blended CFs due to burnt off LLDPE stemming from carbonization. Further study into compatibilizers and new conversion processes is required to successfully blend LLDPE with mesophase pitch for the purpose of producing a new low-cost CF.

36 MATERIALS SCIENCE↗

Graphene reinforced UHMWPE fibers

Thermoplastic polymers are increasingly used in electric vehicles, hydrogen fuel cell vehicles, and other decarbonization applications due to their lightweight and formability. Higher-strength polymers are needed to supplant metals in the vehicle structure, thereby reducing mass and improving efficiency. Ultra-high molecular weight polyethylene (UHMWPE) fibers possess one of the highest strength-to-weight ratios of technical polymers, and further improvement via reinforcement by nanofillers, such as graphene, will expand their performance envelope. Here, in this work, UHMWPE/graphene nanocomposite fibers were gel spun and characterized for their morphological, microstructural, thermal, and mechanical properties. The addition of a low fraction of graphene improved the tensile strength of the fibers by 25% and tensile modulus by 32%. Differential scanning calorimetry showed an increase in melting temperature and degree of crystallinity, which indicates improved coordination of the molecular chains induced by the addition of graphene. The reinforcement also affected the cross-sectional shape of the fibers; the aspect ratio of the fibers’ elliptical shape declined with increasing graphene content showing the skeletal effect of the graphene nanofillers in the polymer matrix. The reinforcing effect of graphene declined above a threshold concentration, and theoretical modeling was applied to demonstrate that increased agglomerates led to reduced properties. This work demonstrates a simple, effective method to produce graphene-reinforced UHMWPE fibers and lays a foundation for understanding the potential for leveraging graphene to form ultra-high-performance nanocomposite fibers for myriad engineering applications.

36 MATERIALS SCIENCE↗

Generating aerodynamic surrogate nuclear explosion debris (SNED)

So called “aerodynamic debris” has often been observed from explosion debris collected on the fringe of surface nuclear tests, and is assumed to result from ejection of melted and re-condensing ground materials drawn up into the rising explosion fireball. The material forms small glassy particulates measuring ~1mm, ranging in shape from near perfectly spherical glassy beads to more elongated forms and occasionally agglomerates of two or more particles displaying some degree of fusion. Producing material with a similar range of characteristics in the laboratory may be quite challenging, as the temperatures required can exceed 1500°C while keeping the particulates suspended in constant motion. In this paper we describe an apparatus that can heat lofted sediment particulates up to 1mm very rapidly above their melting points, allowing extended interactions times from seconds to minutes. Examples of the different material forms produced will be compared to real aerodynamic debris recovered from nuclear explosions described in the literature.

Liezers, M.↗

Structural investigation and applications of glassy sodium phosphate including the kinetics of dissolution rates and spectral analysis of the prepared samples with a focus on their effects on water treatment

This paper discuss the preparation of the binary system of Phosphate Based Glass (PBG) xP{sub 2}O{sub 5}–(100 − x) Na{sub 2}O mol% and investigates the compositions that form glassy matrix. It is found that x in the range between x = 40–60 mol% and divided in to 5 glass samples (x = 40, 45, 50, 55, 60) and for compositions of 40 > x > 60 no glassy matrix is formed. The intensities of the peak centers of the IR spectra of sodium phosphate glasses and the suggested vibrational modes of structural phosphate chains, terminal groups and tabulated data imply a shift in absorption bands with increasing the Na{sub 2}O mol% content. The amount of bridging phosphorous, shows a maximum value for the glass containing 60 mol% Na{sub 2}O due to the depolymerization of the phosphate matrix with increasing Na{sub 2}O content from 40 to 60 mol% via a breakdown of some terminal bonds (P=O) in the glass network which decreases the bond strength, consequently the peak center is shifted towards lower wave number. Essentially, five compositions of glassy samples were investigated: (x = 40, 45, 50, 55, and 60) mol%. The kinetics of dissolution rate were investigated by two ways: 1—the weight loss data and 2—electrical properties of the solution (pH, Electrical Conductivity) leached by the glass sample in to the deionized water. It is found that with increasing the Na{sub 2}O% content, the pH values, the dissolution rate and the solubility are increasing. It could be noticed that the ionic levels increased with the immersion time and were directly related to the solubility of the glasses. The highest in solubility (x = 40) is the highest in EC and pH values caused by high Na{sub 2}O%. By studying the effect of PBG on the real water medium physical characteristics the following results were achieved: Softening of (Treated drinking water, Nile raw water) by removal of hardness (Ca, Mg) by x = 50; 50% P{sub 2}O{sub 5}–50% Na{sub 2}O, Sequestering and agglomerating of (groundwater, wastewater) of some heavy metals as (Fe, Mn) up to 100% removal by x = 60; 60% P{sub 2}O{sub 5}–40% Na{sub 2}O and the electrical properties (pH, EC) were discussed. Results are assuring the possibility of applying PBG for groundwater treatment of high Fe and Mn content. The data show that municipal groundwater supplies become acceptable according to the guidelines of American Chemistry Council for safe drinking water by using of polyphosphates for water treatment.

54 ENVIRONMENTAL SCIENCES↗

Optical behavior and TL kinetics of Eu{sup 3+} and Tb{sup 3+} doped zirconate thermoluminescent phosphors

The influence of Tb{sup 3+} and Eu{sup 3+} ions on the optical behavior and TL kinetics of the synthesized phosphors were analyzed here. The AZrO{sub 3} (A = Ca, Ba, Sr) phosphors activated with Eu{sup 3+} and Tb{sup 3+} ions were prepared using solid state reaction technique. The doping concentration of Eu{sup 3+} and Tb{sup 3+} ions is varied from 0 to 2 mol% for each. The PXRD analysis is done to study various crystallographic aspects of synthesized phosphors. It confirms the crystalline structure, phase purity and homogeneity of synthesized phosphors. The FESEM and TEM analyses show formation of particles with irregular shape and variable dimensions. The agglomeration of these particles is a resultant of prolonged heat treatments involved in solid state reaction method at elevated temperatures. The study of TL spectra of UV and gamma irradiated phosphors set forth their second order kinetics. The electrons were trapped in trap centers with high trap depth and hence high amount of energy (~ 3 eV) is required to vacate them. The doping of trivalent rare earth impurity ions in the perovskite host lattice leads to formation of these traps centers. With enhanced TL intensity and low fading characteristics, these phosphors are suitable alternatives for TL mapping and sensing applications.

36 MATERIALS SCIENCE↗

Adsorption and Deactivation Characteristics of Cu/ZnO-Based Catalysts for Methanol Synthesis from Carbon Dioxide

The adsorption and deactivation characteristics of coprecipitated Cu/ZnO-based catalysts were examined and correlated to their performance in methanol synthesis from CO₂ hydrogenation. The addition of Ga₂O₃ and Y₂O₃ promoters is shown to increase the Cu surface area and CO₂/H₂ adsorption capacities of the catalysts and enhance methanol synthesis activity. Infrared studies showed that CO₂ adsorbs spontaneously on these catalysts at room temperature as both monoand bi-dentate carbonate species. These weakly bound species desorb completely from the catalyst surface by 200 °C while other carbonate species persist up to 500 °C. Characterization using N₂O decomposition, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM) with energy-dispersive X-ray spectroscopy (EDX) analysis clearly indicated that Cu sintering is the main cause of catalyst deactivation. Ga and Y promotion improves the catalyst stability by suppressing the agglomeration of Cu and ZnO particles under pretreatment and reaction conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Derivation and assessment of regional electricity generation emission factors in the USA

Electricity production is one of the largest sources of environmental emissions - especially greenhouse gases (GHGs) - in the USA. Emission factors (EFs) vary from region to region, which requires the use of spatially relevant EF data for electricity production while performing life cycle assessments (LCAs). Uncertainty information, which is sought by LCA practitioners, is rarely supplied with available life cycle inventories (LCIs). To address these challenges, we present a method for collecting data from different sources for electricity generation and environmental emissions; discuss the challenges involved in agglomerating such data; provide relevant suggestions and solutions to merge the information; and calculate EFs for electricity generation processes from various fuel sources for different spatial regions and spatial resolutions. The EFs from the US 2016 Electricity Life Cycle Inventory (eLCI) are analyzed and explored in this study. We also explore the method of uncertainty information derivation for the EFs. We explore the EFs from different technologies across Emissions & Generation Resource Integrated Database (eGRID) regions in the USA. We find that for certain eGRID regions, the same electricity production technology may have worse emissions. This may be a result of the age of the plants in the region, the quality of fuel used, or other underlying factors. Region-wise life cycle impact assessment (LCIA) ISO 14040 impacts for total generation mix activities provide an overview of the total sustainability profile of electricity production in a particular region, rather than only global warming potential (GWP). We also find that, for different LCIA impacts, several eGRID regions are consistently worse than the US average LCIA impact for every unit of electricity generated. Here this work describes the development of an electricity production LCI at different spatial resolutions by combining and harmonizing information from several databases. The inventory consists of emissions, fuel inputs, and electricity and steam outputs from different electricity production technologies located across various regions of the USA. This LCI for electricity production in the USA will prove to be an enormous resource for all LCA researchers - considering the detailed sources of the information and the breadth of emissions covered by it.

24 POWER TRANSMISSION AND DISTRIBUTION↗