Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ADHESIVES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Urea Formaldehyde and Cellulose Nanocrystals Adhesive: Studies Applied to Sugarcane Bagasse Particleboards

The aim of this research was to investigate the behavior of urea formaldehyde (UF) adhesive based particleboards using sugarcane bagasse (SCB), with and without the addition of cellulose nanocrystals (NCC). In the first step of this research study, the interaction between UF and the NCC was evaluated. The NCC were dispersed in the UF, in different proportions (0, 0.5, 1, 2, 3 and 5%). Subsequent to this, the mixtures were dried, milled, and put in molds, to produce flexural specimens. The second step involved evaluation of the interaction between the NCC, UF, and SCB. After sonication, the NCC and UF were applied on the SCB particles to produce particleboards. They were evaluated according to the modulus of elasticity and rupture, water absorption (WA), and thickness swelling. The viscosity of the mixture of NCC and UF increased according to the NCC increase load. At 5% of NCC load, the viscosity increased greatly, which prevented adhesive dispersion in the particleboard. The thermogravimetric analysis of UF showed that better conditions of processing were at 160 °C for 8 min, so these parameters were used to produce the specimens. SCB is a promising raw material for particleboard, and its potential to produce SCB particleboards with relatively good performance was demonstrated. For the particleboards specimens, the best performance was observed with 1% of NCC. Particleboards did not show improvement compared with UF specimens, probably because bond links were not sufficient. Addition of NCC in UF increased the liquid suspension viscosity, and the specimens showed a better mechanical performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Impact of hydrogen bonding pendant groups in polymer grafted nanoparticles on interlayer adhesion and mechanical properties in material extrusion printing

The addition of nanoparticles or copolymer grafted nanoparticles (CPGNPs) to polymeric matrices greatly improves thermomechanical properties of the resulting nanocomposite, but corresponding studies of nanocomposite systems created by 3D printing are few, especially in the realm of functional polymeric materials. Here we describe how silica nanoparticle-grafted, random copolymers of poly(methyl methacrylate-random-2-uriedo-[1H]-pyrimidinone methacrylate) (P(MMA-r-UPyMA) dramatically increases the mechanical properties of poly(methyl methacrylate) (PMMA) based nanocomposite specimens created by melt extrusion printing. Most notably, when these novel CPGNPs are combined with PMMA matrix chains via a solution-based process, printed specimens containing only 0.5 wt% additive show significant increases in Young’s modulus (90%), storage modulus (93%), tensile modulus (148%) and ultimate tensile strength (110%). These improvements are ascribed to strengthening of adhesion across interfaces due to multi-point hydrogen bonding between UPyMA groups, the reinforcement effect of the P(MMA-r-UPyMA)-grafted silica nanoparticles, as well as hydrogen bonding interactions and entanglements between graft and matrix chains. Imaging of fracture surfaces after tensile testing reveals that in comparison to nanocomposites created by simple mechanical mixing of solids, the solution-casting process improves the dispersion of nanoparticles and reduces the void spaces between printed roads. These studies demonstrate that introducing functionality into polymer grafts, such as hydrogen bonding interactions, and intimate mixing of polymer-modified nanomaterials can greatly improve interlayer adhesion and mechanical properties, thereby advancing this method of polymer additive manufacturing

36 MATERIALS SCIENCE↗
DOE OSTI2014

Expression of polysialylated neural cell adhesion molecules on adult stem cells after neuronal differentiation of inner ear spiral ganglion neurons

Highlights: • PolySia expressed on neurons primarily during early stages of neuronal development. • PolySia–NCAM is expressed on neural stem cells from adult guinea pig spiral ganglion. • PolySia is a biomarker that modulates neuronal differentiation in inner ear stem cells. - Abstract: During brain development, polysialylated (polySia) neural cell adhesion molecules (polySia–NCAMs) modulate cell–cell adhesive interactions involved in synaptogenesis, neural plasticity, myelination, and neural stem cell (NSC) proliferation and differentiation. Our findings show that polySia–NCAM is expressed on NSC isolated from adult guinea pig spiral ganglion (GPSG), and in neurons and Schwann cells after differentiation of the NSC with epidermal, glia, fibroblast growth factors (GFs) and neurotrophins. These differentiated cells were immunoreactive with mAb’s to polySia, NCAM, β-III tubulin, nestin, S-100 and stained with BrdU. NSC could regenerate and be differentiated into neurons and Schwann cells. We conclude: (1) polySia is expressed on NSC isolated from adult GPSG and on neurons and Schwann cells differentiated from these NSC; (2) polySia is expressed on neurons primarily during the early stage of neuronal development and is expressed on Schwann cells at points of cell–cell contact; (3) polySia is a functional biomarker that modulates neuronal differentiation in inner ear stem cells. These new findings suggest that replacement of defective cells in the inner ear of hearing impaired patients using adult spiral ganglion neurons may offer potential hope to improve the quality of life for patients with auditory dysfunction and impaired hearing disorders.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2015

Rac1 modulates cardiomyocyte adhesion during mouse embryonic development

Highlights: • Conditional knockout of Rac1 using Nkx2.5 Cre line is lethal at E13.5. • The myocardium of the mutant is thin and disorganized. • The phenotype is not due to cardiomyocyte low proliferation or apoptosis. • The phenotype is due to specific defect in cardiomyocyte adhesion. - Abstract: Rac1, a member of the Rho subfamily of small GTPases, is involved in morphogenesis and differentiation of many cell types. Here we define a role of Rac1 in cardiac development by specifically deleting Rac1 in the pre-cardiac mesoderm using the Nkx2.5-Cre transgenic driver line. Rac1-conditional knockout embryos initiate heart development normally until embryonic day 11.5 (E11.5); their cardiac mesoderm is specified, and the heart tube is formed and looped. However, by E12.5-E13.5 the mutant hearts start failing and embryos develop edema and hemorrhage which is probably the cause for the lethality observed soon after. The hearts of Rac1-cKO embryos exhibit disorganized and thin myocardial walls and defects in outflow tract alignment. No significant differences of cardiomyocyte death or proliferation were found between developing control and mutant embryos. To uncover the role of Rac1 in the heart, E11.5 primary heart cells were cultured and analyzed in vitro. Rac1-deficient cardiomyocytes were less spread, round and loosely attached to the substrate and to each other implying that Rac1-mediated signaling is required for appropriate cell–cell and/or cellmatrix adhesion during cardiac development.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2015

Role of HLA-G1 in trophoblast cell proliferation, adhesion and invasion

Trophoblast cells are important in embryo implantation and fetomaternal tolerance. HLA-G is specifically expressed at the maternal–fetal interface and is a regulator in pregnancy. The aim of the present study was to detect the effect of HLA-G1 on trophoblast cell proliferation, adhesion, and invasion. Human trophoblast cell lines (JAR and HTR-8/SVneo cells) were infected with HLA-G1-expressing lentivirus. After infection, HLA-G1 expression of the cells was detected by western blotting. Cell proliferation was detected by the BrdU assay. The cell cycle and apoptosis of JAR and HTR-8/SVneo cells was measured by flow cytometry (FCM). The invasion of the cells under different conditions was detected by the transwell invasion chamber assay. HLA-G1 didn't show any significant influence on the proliferation, apoptosis, adhesion, and invasion of trophocytes in normal culture conditions. However, HLA-G1 inhibited JAR and HTR-8/SVneo cells invasion induced by hepatocyte growth factor (HGF) under normal oxygen conditions. In conditions of hypoxia, HLA-G1 couldn't inhibit the induction of cell invasion by HGF. HLA-G1 is not an independent factor for regulating the trophocytes. It may play an indirect role in embryo implantation and formation of the placenta. - Highlights: • HLA-G1 could not influence trophocytes under normal conditions. • HLA-G1 inhibited cell invasion induced by HGF under normal oxygen condition. • HLA-G1 could not influence cell invasion under hypoxia conditions.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2015

Curcumin inhibits development and cell adhesion in Dictyostelium discoideum: Implications for YakA signaling and GST enzyme function

The molecular basis for nutraceutical properties of the polyphenol curcumin (Curcuma longa, Turmeric) is complex, affecting multiple factors that regulate cell signaling and homeostasis. Here, we report the effect of curcumin on cellular and developmental mechanisms in the eukaryotic model, Dictyostelium discoideum. Dictyostelium proliferation was inhibited in the presence of curcumin, which also suppressed the prestarvation marker, discoidin I, members of the yakA-mediated developmental signaling pathway, and expression of the extracellular matrix/cell adhesion proteins (DdCAD and csA). This resulted in delayed chemotaxis, adhesion, and development of the organism. In contrast to the inhibitory effects on developmental genes, curcumin induced gstA gene expression, overall GST activity, and generated production of reactive oxygen species. These studies expand our knowledge of developmental and biochemical signaling influenced by curcumin, and lends greater consideration of GST enzyme function in eukaryotic cell signaling, development, and differentiation.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2011

A test method for determining adhesion forces and Hamaker constants of cementitious materials using atomic force microscopy

A method for determining Hamaker constant of cementitious materials is presented. The method involved sample preparation, measurement of adhesion force between the tested material and a silicon nitride probe using atomic force microscopy in dry air and in water, and calculating the Hamaker constant using appropriate contact mechanics models. The work of adhesion and Hamaker constant were computed from the pull-off forces using the Johnson-Kendall-Roberts and Derjagin-Muller-Toropov models. Reference materials with known Hamaker constants (mica, silica, calcite) and commercially available cementitious materials (Portland cement (PC), ground granulated blast furnace slag (GGBFS)) were studied. The Hamaker constants of the reference materials obtained are consistent with those published by previous researchers. The results indicate that PC has a higher Hamaker constant than GGBFS. The Hamaker constant of PC in water is close to the previously predicted value C{sub 3}S, which is attributed to short hydration time ({<=} 45 min) used in this study.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Pectin-associated mannans and xylans play distinct roles in cell-cell adhesion in pine and poplar wood

Wood particles of pine required longer treatments of acidic chlorite and dilute alkali to achieve similar proportions of cell separation as of poplar. Chemical extraction and enzymatic digestion studies indicated that rhamnogalacturonan-I (RG-I), mannan and xylan contribute to cell-cell adhesion in pine wood. Mannan associated with lignin in an acidic chlorite fraction and with xylan in a dilute alkali fraction. RG-I and xylan were extracted in both chlorite and dilute alkali in poplar. Scanning electron microscopy and a probe diffusion study using Fluorescence Recovery After Photobleaching showed that lignin, RG-I and mannan initiated cell separation at cell corners and dilute alkali extraction of xylan was required for complete cell separation in pine. Cell-cell separation increased enzymatic saccharification within 24 h by 2-fold in poplar and 3.4-fold in pine. Finally, our results inform a strategy to reduce particle size in woody biomass and provide insights into different molecular bases of cell-cell adhesion.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Effects of sample bias on adhesion of magnetron sputtered Cr coatings on SiC

Swelling of SiC at 300 C due to in-service neutron irradiation causes tensile residual stresses in coatings which are expected to adversely affect the performance of coated SiC composite fuel cladding for light water reactors. Matching the coating swelling with the substrate, a solution common for thermal expansion, is not practical in the case of neutron irradiation. Biasing samples during magnetron sputtering deposition induces compressive residual stress which may counteract this. In this study, chromium coatings were deposited on SiC by DC magnetron sputtering with no external heating at bias voltages of –50V, –75V, and –100V. The effects of the bias voltage on morphology, residual stress, microstrain, texture, and adhesion are shown. The low deposition temperature resulted in the coating microstructure evolution following an energetic particle bombardment dominated trend. Additionally, at the two lower bias voltages knock-on implantation dominated increasing the residual stress and microstrain while at the highest bias voltage, thermal spike migration allowed for defect relaxation. When the knock-on induced compressive residual stress exceeded 0.8 GPa microcrack formation in the SiC substrate decreased coating adhesion. While no microcracks formed at the lowest bias voltage, insufficient atomic mobility during coating growth lead to voids forming in the coating. A balance is needed to form void-free coatings that have high compressive residual stress.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Work Function Tuning of a Weak Adhesion Homojunction for Stable Perovskite Solar Cells

Perovskite solar cells (PSCs) have demonstrated a comparable efficiency to Si-based cells. However, the buried interface with weak adhesion remains a critical issue since the ion migration enhanced by the built-in electric field at this interface might lead to instability. We report here that adjusting the energy-level alignment at the weak adhesion homojunction interface can mitigate ion migration and thereby enhance the stability and photovoltaic performance of PSCs. Functional molecules with self-assembled monolayer characteristics were introduced to the surface of the SnO2 layer using silane derivatives, which tuned the work function of the homojunction depending on the functional groups in the molecules and thereby significantly reduced the built-in electric field. The PSC exhibited a power conversion efficiency (PCE) of 25.3%. The maximum power point (MPP) tracking under continuous illumination confirmed that the device retained more than 97% of its initial PCE, even after 1,000 h.

homojunction↗
DOE OSTI2026

Hygrothermal aging effects on polyimide and acrylate-based adhesive materials in high-performance flat-flex cable assemblies

Flat-flex assemblies are widely used across a diverse range of technologies, including consumer electronics, automotive systems, aerospace and defense applications, and medical devices, due to their compact form factor and flexibility. However, environmental stressors like temperature and humidity are known to degrade performance over time, though the main mechanisms for degradation remain unknown. Here, in this work, we examined the aging behavior of copper/polyimide/adhesive laminate systems under varying temperature and humidity conditions, focusing on material degradation and its effects on mechanical and dielectric properties. Results show that peel strength and breakdown voltage decrease with exposure time, temperature, and humidity; spectroscopic characterization revealed that the adhesive, and not the polyimide, is the weak link in the material stack-up. The adhesive, identified as a butyl acrylate-acrylonitrile (BA-AN) copolymer, exhibited age-related spectral changes that correlated with exposure severity and duration. Hydrolysis at BA ester and AN nitrile groups was identified as the primary degradation mechanism, producing amides, acids, and alcohols. We developed a mechanistic model that connects kinetic parameters for BA-AN spectral band decay to peel strength and breakdown voltage, and implicates hydrolysis at the AN moiety, not BA, in performance decrements. Modeling predictions at ambient conditions indicate faster decline in peel strength than dielectric strength at early times, followed by plateauing of both properties at longer times. These findings provide critical insights into laminate aging mechanisms and highlight the importance of addressing BA-AN degradation to improve the long-term reliability of these systems in high-humidity environments.

organic↗
DOE OSTI2013

The selective role of ECM components on cell adhesion, morphology, proliferation and communication in vitro

Cell binding to the extracellular matrix (ECM) is essential for cell and tissue functions. In this context, each tissue consists of a unique ECM composition, which may be responsible for tissue-specific cell responses. Due to the complexity of ECM-cell interactions—which depend on the interplay of inside-out and outside-in signaling cascades, cell and tissue specificity of ECM-guidance is poorly understood. In this paper, we investigate the role of different ECM components like laminin, fibronectin, and collagen type I with respect to the essential cell behaviour patterns: attachment dynamics such as adhesion kinetic and force, formation of focal adhesion complexes, morphology, proliferation, and intercellular communication. A detailed in vitro comparison of fibroblasts, endothelial cells, osteoblasts, smooth muscle cells, and chondrocytes reveals significant differences in their cell responses to the ECM: cell behaviour follows a cell specific ligand priority ranking, which was independent of the cell type origin. Fibroblasts responded best to fibronectin, chondrocytes best to collagen I, the other cell types best to laminin. This knowledge is essential for optimization of tissue-biomaterial interfaces in all tissue engineering applications and gives insight into tissue-specific cell guidance. -- Highlights: • We analyse the impact of ECM components on cell behaviour in vitro. • We compare five different cell types, using the same culture conditions. • The ECM significantly guides all cell responses. • Cell behaviour follows a cell specific ligand-priority ranking. • This gives insight in tissue formation and is essential for biomedical applications.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Combining Sub-nanometer Adhesion and Capping Layers for Thermally Stable Nanometer-Thick Au Films

Improving the thermal stability of Au thin films is critical if thermo-plasmonic applications such as heat-assisted magnetic recording are to become commercially viable. In this work, Al capping layers are deposited on M/Au films, where adhesion metal M = Ti or Ta, and are investigated for their utility in stabilizing Au thin films against dewetting. Therefore, contrary to previous investigations, it was found that thinner capping layers (0.5 nm) result in a greater stability than that conferred by thicker (1-5 nm) layers. Deposition of 0.5 nm of Al, which subsequently oxidizes when exposed to air, resulted in up to 10x stability enhancement. Similarly, capping with 0.5 nm Al resulted in less damping of the plasmonic response than with thicker capping layers. Finally, based on this work and previous work on metallic adhesion layers, optimally stable systems for thermo-plasmonic applications are proposed.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Size-Dependent Energy and Adhesion of Pd Nanoparticles on Graphene on Ni(111) by Pd Vapor Adsorption Calorimetry

Carbon-supported late transition-metal nanoparticles are promising catalysts and electrocatalysts for wide-ranging applications. However, experimental investigations of the bonding energetics of metal nanoparticles on carbon supports are very limited. Here, in this work, we report heats of adsorption of Pd vapor deposited onto single-layer graphene(0001) supported on Ni(111) at 100 and 300 K as Pd grows particles of well-defined size in the range from three atom clusters to 6 nm diameter. Sizes were determined from He + low-energy ion scattering (LEIS). In this size range, the differential heat of Pd adsorption increases from 228 kJ/mol to within 10 kJ/mol of the heat of sublimation of bulk Pd (377 kJ/mol). The chemical potential of metal atoms in these nanoparticles as a function of average particle size was determined from these results. The adhesion energy at the Pd/graphene(0001)/Ni(111) interface was extracted from these data and found to be 3.5 J/m 2 for the largest Pd particles. For the three metal elements that have now been studied (Pd, Ni, and Ag), we found an increase in metal/graphene(0001)/Ni(111) adhesion energy with metal carbophilicity, which we defined here as the heat of C atom adsorption on that metal’s (111) surface estimated from published density functional theory calculations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Predicting Adhesion Energies of Metal Nanoparticles to Support Surfaces, Which Determines Metal Chemical Potential versus Particle Size and Thus Catalyst Performance

Improved catalysts and electrocatalysts composed of transition metal nanoparticles dispersed on high-area supports are essential for energy and environmental technologies. The chemical potential of the metal atoms in these supported nanoparticles is an important descriptor that correlates with both their catalytic activity and deactivation rate. This descriptor (μ M ) is predictably determined by the particle size and the adhesion energy per unit area at the metal/support interface (E adh ). We show here that the adhesion energies for different metals on a given support scale linearly with a simple property of the metal: for oxides, it is proportional to the metal oxophilicity, and for the carbon support, it increases linearly with metal carbophilicity (both divided by the area per metal atom). Furthermore, these relationships allow predicting E adh for other metal/support combinations, thus allowing estimation of μ M versus particle size and thereby better structure-based predictions of catalysts’ performance, which can aid in designing improved catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Qualitative link between work of adhesion and thermal conductance of metal/diamond interfaces

We report Time-Domain ThermoReflectance experiments measuring the Thermal Boundary Conductance (TBC) of interfaces between diamond and metal surfaces, based on samples consisting of [111]-oriented diamond substrates with hydrogen or with sp{sup 2} carbon surface terminations created using plasma treatments. In a concurrent theoretical study, we calculate the work of adhesion between Ni, Cu, and diamond interfaces with (111) surface orientation, with or without hydrogen termination of the diamond surface, using first-principles electronic structure calculations based on density functional theory (DFT). We find a positive correlation between the calculated work of adhesion and the measured conductance of these interfaces, suggesting that DFT could be used as a screening tool to identify metal/dielectric systems with high TBC. We also explain the negative effect of hydrogen on the thermal conductance of metal/diamond interfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Investigation of the adhesive bonding technology for the insulator structure of EAST neutral beam injector

A key issue on the development of EAST ion source was the junction design of insulator structure, which consists of three insulators and four supporting flanges of electrode grid. Because the ion source is installed on the vertical plane, the insulator structure has to withstand large bending and shear stress due to the gravity of whole ion source. Through a mechanical analysis, it was calculated that the maximum bending normal stress was 0.34 MPa and shear stress was 0.23 MPa on the insulator structure. Due to the advantages of simplicity and high strength, the adhesive bonding technology was applied to the junction of insulator structure. A tensile testing campaign of different junction designs between insulator and supporting flange was performed, and a junction design of stainless steel and fiber enhanced epoxy resin with epoxy adhesive was determined. The insulator structure based on the determined design can satisfy both the requirements of high-voltage holding and mechanical strength.

42 ENGINEERING↗
DOE OSTI2015

Enriched adhesion of talc/ZnO nanocomposites on cotton fabric assisted by aloe-vera for bio-medical application

Synthesis and characterization of talc/ZnO nanocomposites with the assistance of aloe-vera are investigated by structural and morphological studies. The crystal structure and the phase analysis of ZnO and talc are characterized and confirmed by X-ray diffraction (XRD) analysis. The average crystallite size estimation from the Scherrer formula and the particle size analysis clearly predicts that the size of the ZnO declines when aloe-vera is used as a capping molecule in comparison to the commercially available ZnO. The reduced crystallite size of ZnO renders a stable cohesion with the talc composition and the presence of distinct functional group pyridines/ammonia in the synthesized nanocomposites enriches the good adhesion between the as-synthesized material and cotton fabric. The adhesion and homogeneous distribution of talc/ZnO nanocomposites on the cotton fabric are inferred from the scanning electron microscopy (SEM) results. The basic studies and characterizations would pave way for futuristic bio-medical application.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗