Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “66”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Tuning the Electrochemical Performance of Titanium Carbide MXene by Controllable In Situ Anodic Oxidation

Abstract MXenes are a class of two‐dimensional (2D) transition metal carbides, nitrides and carbonitrides that have shown promise for high‐rate pseudocapacitive energy storage. However, the effects that irreversible oxidation have on the surface chemistry and electrochemical properties of MXenes are still not understood. Here we report on a controlled anodic oxidation method which improves the rate performance of titanium carbide MXene (Ti 3 C 2 T x , T x refers to ‐F, =O, ‐Cl and ‐OH) electrodes in acidic electrolytes. The capacitance retention at 2000 mV s −1 (with respect to the lowest scan rate of 5 mV s −1 ) increases gradually from 38 % to 66 % by tuning the degree of anodic oxidation. At the same time, a loss in the redox behavior of Ti 3 C 2 T x is evident at high anodic potentials after oxidation. Several analysis methods are employed to reveal changes in the structure and surface chemistry while simultaneously introducing defects, without compromising electrochemically active sites, are key factors for improving the rate performance of Ti 3 C 2 T x . This study demonstrates improvement of the electrochemical performance of MXene electrodes by performing a controlled anodic oxidation.

Tang, Jun↗
DOE OSTI2025

Validation and Mechanistic Studies of the Headspace Effect in MOF Synthesis

Abstract The influence of headspace volume and composition on metal–organic framework (MOF) synthesis has been largely overlooked with no mechanisms currently invoking these factors. Herein, we reveal that an increased volume of oxygen in the headspace during the synthesis of zinc carboxylate‐based MOFs (MOF‐5, MOF‐177, and IRMOF‐8) as well as UiO‐66 and ZJU‐28 accelerates crystal formation. Investigation into the underlying mechanism of this phenomenon elucidates the critical roles played by all reagents, and some of their byproducts, in MOF synthesis. These insights are the key to developing more efficient and sustainable synthetic strategies for MOF production.

Donovan, Julia C. [Department of Chemistry Institu↗
DOE OSTI2016

Proton Transport in a Highly Conductive Porous Zirconium‐Based Metal–Organic Framework: Molecular Insight

Abstract The water stable UiO‐66(Zr)‐(CO 2 H) 2 MOF exhibits a superprotonic conductivity of 2.3×10 −3 S cm −1 at 90 °C and 95 % relative humidity. Quasi‐elastic neutron scattering measurements combined with aMS‐EVB3 molecular dynamics simulations were able to probe individually the dynamics of both confined protons and water molecules and to further reveal that the proton transport is assisted by the formation of a hydrogen‐bonded water network that spans from the tetrahedral to the octahedral cages of this MOF. This is the first joint experimental/modeling study that unambiguously elucidates the proton‐conduction mechanism at the molecular level in a highly conductive MOF.

Borges, Daiane Damasceno↗
DOE OSTI2019

Tuning the Electrochemical Performance of Titanium Carbide MXene by Controllable In Situ Anodic Oxidation

MXenes are a class of two-dimensional (2D) transition metal carbides, nitrides and carbonitrides that have shown promise for high-rate pseudocapacitive energy storage. However, the effects that irreversible oxidation have on the surface chemistry and electrochemical properties of MXenes are still not understood. In this work, we report on a controlled anodic oxidation method which improves the rate performance of titanium carbide MXene (Ti 3 C 2 T x , T x refers to -F, =O, -Cl and -OH) electrodes in acidic electrolytes. The capacitance retention at 2000 mV s -1 (with respect to the lowest scan rate of 5 mV s -1 ) increases gradually from 38% to 66% by tuning the degree of anodic oxidation. At the same time, a loss in the redox behavior of Ti 3 C 2 T x is evident at high anodic potentials after oxidation. Several analysis methods are employed to reveal changes in the structure and surface chemistry while simultaneously introducing defects, without compromising electrochemically active sites, are key factors for improving the rate performance of Ti 3 C 2 T x . This study demonstrates improvement of the electrochemical performance of MXene electrodes by performing a controlled anodic oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Validation and Mechanistic Studies of the Headspace Effect in MOF Synthesis

Abstract The influence of headspace volume and composition on metal–organic framework (MOF) synthesis has been largely overlooked with no mechanisms currently invoking these factors. Herein, we reveal that an increased volume of oxygen in the headspace during the synthesis of zinc carboxylate‐based MOFs (MOF‐5, MOF‐177, and IRMOF‐8) as well as UiO‐66 and ZJU‐28 accelerates crystal formation. Investigation into the underlying mechanism of this phenomenon elucidates the critical roles played by all reagents, and some of their byproducts, in MOF synthesis. These insights are the key to developing more efficient and sustainable synthetic strategies for MOF production.

Donovan, Julia C. [Department of Chemistry Institu↗
DOE OSTI2018

Corn stover cannot simultaneously meet both the volume and GHG reduction requirements of the renewable fuel standard

Corn stover is expected to supply much of the cellulosic biomass required to meet the 61 billion liters per year target under the US Energy Independence and Security Act. The Act also requires that cellulosic biofuels achieve a greenhouse gas (GHG) reduction of 60% compared to gasoline. If corn stover is harvested for biofuels, it can no longer help replenish soil organic matter, and net soil carbon emissions increase. So meeting the GHG reduction target is a concern. We studied the effect of stover removal on overall GHG emissions of corn stover ethanol systems in the 12-state Corn Belt region. Even at a stover removal rate of 66%, no more than 20 billion liters can be annually produced while simultaneously satisfying the 60% GHG reduction. Moreover, no GHG reduction relative to gasoline occurs in short time periods. The GHG benefits of corn stover ethanol only appear after longer time periods.

cellulosic biofuel, corn stover, ethanol, geospati↗
DOE OSTI2021

Nth-plant supply: corn stover supplies and costs in a fleet of biorefineries

Feedstock cost and cost variability is expected to increase with the number of biorefineries. To quantify this effect, this spatial-economic analysis simulates feedstock cost and cost variability of an industry based on corn stover as a function of the number of biorefineries. Results are reported for nine scenarios (a base case and sensitivity analysis of four variables – harvest efficiency, sustainability constraints, opportunity cost, and corn grain yield) under deterministic and stochastic simulations, assuming biorefineries using 658 000 Mg (725 000 tons) year- 1 of corn stover in 2019. The resulting supply curves are highly elastic (i.e. little change in cost) for the first 50 of the 121 biorefineries, with price increases in subsequent biorefineries depending on scenario. In the base-case deterministic scenario, weighted-average stover costs are $66 Mg -1 ($60 ton- 1 ), $69 Mg -1 ($62 ton -1 ), and $156 Mg -1 ($142 ton -1 ), at the first, 60th, and 121st biorefineries, respectively. The stochastic simulations, subject to observed 30-year corn yield variability, follow a similar pattern, with price distributions that vary by scenario. The base-case stochastic simulations illustrate minimal cost variability for the first 60 biorefineries, but rapid increases in cost variability in the second half of potential biorefineries, with similar patterns observed in the other scenarios. Of the four variables explored, price was most sensitive to harvest efficiency, followed by sustainability constraints, corn yield, and opportunity cost. Results suggest that, under conventional logistics, about half of the US corn stover resource is reliably available with minimum cost increase and variability. Interactive visualization is available at https://doi.org/10.11578/1828779.

09 BIOMASS FUELS↗
DOE OSTI2022

Adsorptive separation and recovery of triacetic acid lactone from fermentation broth

Triacetic acid lactone (TAL), an emerging bioprivileged molecule, can be produced microbially and further chemically upgraded to several high-value chemicals. In this work, several acidic and basic ion-exchange resins and activated charcoal were evaluated for their ability to adsorb microbially produced TAL. Activated charcoal and a weak base resin, Dowex 66, showed similar TAL adsorption capacity of 0.18 ± 0.002 g/g. At 15% w/v activated charcoal, about 98% of TAL present in fermentation broth could be adsorbed. Further, ethanol washing allowed recovery of 72% of adsorbed TAL. A biorefinery producing TAL from sucrose was designed, simulated, and evaluated (through technoeconomic analysis) under uncertainty, for an estimated TAL minimum product selling price (MPSP) of $\$4.27$/kg ($\$3.71$–4.94/kg; 5th–95th percentiles) given the current state of technology and $\$2.83$/kg ($\$2.46$–3.29/kg) following potential near-term improvements to fermentation. This work provides an adsorptive process for the recovery of microbially produced TAL that can be upgraded chemically to a range of industrial products.

09 BIOMASS FUELS↗
DOE OSTI2023

Designing a GIS-based supply chain for producing carinata-based sustainable aviation fuel in Georgia, USA

Carinata is a potential crop for sustainable aviation fuel (SAF) production in the southern USA. However, as a novel crop, the cost-effectiveness and environmental feasibility of carinata feedstock are unknown, and there are questions about the optimal supply chain configuration for carinata-based SAF production. This study aims to design a supply chain model for carinata-based SAF production by optimizing the location of farms and facilities (e.g. storage units, crushing mills, biorefineries) for a minimum transportation cost under a set of supply and demand conditions. An integrated mixed-integer linear programming (MILP) model was combined with geographical information system (GIS) analysis to design a spatially explicit supply chain configuration. The GIS-based network analysis considered all of the counties in Georgia to set the candidate locations of carinata farms and facilities, and determined minimum cost and emission routes between those counties and the airport using existing transportation networks and modes (e.g. road, rail and pipeline). The MILP model determined the final selection of the farms and the number of facilities and their locations over those minimum-cost routes. With this supply chain configuration, the minimum price of SAF was $\$$0.92 L –1 , which is $\$$0.44 higher than conventional aviation fuel (CAF). The associated carbon intensity of SAF was estimated at 940.7 g CO 2 e L –1 , a reduction of 66% relative to the carbon intensity of equivalent CAF. The study found that a carbon tax (or subsidy) of $\$$230.48 t CO 2 e –1 would be needed to overcome the cost differential with CAF and promote carinata-based SAF in Georgia.

09 BIOMASS FUELS↗
DOE OSTI2019

A Thorium Metal‐Organic Framework with Outstanding Thermal and Chemical Stability

Abstract A new thorium metal‐organic framework (MOF), Th(OBA) 2 , where OBA is 4,4′‐oxybis(benzoic) acid, has been synthesized hydrothermally in the presence of a range of nitrogen‐donor coordination modulators. This Th‐MOF, described herein as GWMOF‐13, has been characterized by single‐crystal and powder X‐ray diffraction, as well as through a range of techniques including gas sorption, thermogravimetric analysis (TGA), solid‐state UV/Vis and luminescence spectroscopy. Single‐crystal X‐ray diffraction analysis of GWMOF‐13 reveals an interesting, high symmetry (cubic Ia d ) structure, which yields a novel srs‐a topology. Most notably, TGA analysis of GWMOF‐13 reveals framework stability to 525 °C, matching the thermal stability benchmarks of the UiO‐66 series MOFs and zeolitic imidazolate frameworks (ZIFs), and setting a new standard for thermal stability in f‐block based MOFs.

Carter, Korey P.↗
DOE OSTI2023

Accelerating x-ray tracing for exascale systems using Kokkos

The upcoming exascale computing systems Frontier and Aurora will draw much of their computing power from GPU accelerators. The hardware for these systems will be provided by AMD and Intel, respectively, each supporting their own GPU programming model. The challenge for applications that harness one of these exascale systems will be to avoid lock-in and to preserve performance portability. We report here on our results of using Kokkos to accelerate a real-world application on NERSC's Perlmutter Phase 1 (using NVIDIA A100 accelerators) and Crusher, the testbed system for OLCF's Frontier (using AMD MI250X). By porting to Kokkos, we successfully ran the same X-ray tracing code on both systems and achieved speed-ups between 13 % and 66 % compared to the original CUDA code. Finally, these results are a highly encouraging demonstration of using Kokkos to accelerate production science code.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2016

Effects of experimentally added salmon subsidies on resident fishes via direct and indirect pathways

Abstract Artificial additions of nutrients of differing forms such as salmon carcasses and analog pellets (i.e. pasteurized fishmeal) have been proposed as a means of stimulating aquatic productivity and enhancing populations of anadromous and resident fishes. Nutrient mitigation to enhance fish production in stream ecosystems assumes that the central pathway by which effects occur is bottom‐up, through aquatic primary and secondary production, with little consideration of reciprocal aquatic‐terrestrial pathways. The net outcome (i.e. bottom‐up vs. top‐down) of adding salmon‐derived materials to streams depend on whether or not these subsidies indirectly intensify predation on in situ prey via increases in a shared predator or alleviate such predation pressure. We conducted a 3‐year experiment across nine tributaries of the N. Fork Boise River, Idaho, USA , consisting of 500‐m stream reaches treated with salmon carcasses (n = 3), salmon carcass analog (n = 3), and untreated control reaches (n = 3). We observed 2–8 fold increases in streambed biofilms in the 2–6 weeks following additions of both salmon subsidy treatments in years 1 and 2 and a 1.5‐fold increase in standing crop biomass of aquatic invertebrates to carcass additions in the second year of our experiment. The consumption of benthic invertebrates by stream fishes increased 110–140% and 44–66% in carcass and analog streams in the same time frame, which may have masked invertebrate standing crop responses in years 3 and 4. Resident trout directly consumed 10.0–24.0 g·m −2 ·yr −1 of salmon carcass and <1–11.0 g·m −2 ·yr −1 of analog material, which resulted in 1.2–2.9 g·m −2 ·yr −1 and 0.03–1.4 g·m −2 ·yr −1 of tissue produced. In addition, a feedback flux of terrestrial maggots to streams contributed 0.0–2.0 g·m −2 ·yr −1 to trout production. Overall, treatments increased annual trout production by 2–3 fold, though density and biomass were unaffected. Our results indicate the strength of bottom‐up and top‐down responses to subsidy additions was asymmetrical, with top‐down forces masking bottom‐up effects that required multiple years to manifest. The findings also highlight the need for nutrient mitigation programs to consider multiple pathways of energy and nutrient flow to account for the complex effects of salmon subsidies in stream‐riparian ecosystems.

Collins, Scott F.↗
DOE OSTI2021

Variation in hyphal production rather than turnover regulates standing fungal biomass in temperate hardwood forests

Abstract Soil fungi link above‐ and belowground carbon (C) fluxes through their interactions with plants and contribute to C and nutrient dynamics through the production, turnover, and activity of fungal hyphae. Despite their importance to ecosystem processes, estimates of hyphal production and turnover rates are relatively uncommon, especially in temperate hardwood forests. We sequentially harvested hyphal ingrowth bags to quantify the rates of Dikarya (Ascomycota and Basidiomycota) hyphal production and turnover in three hardwood forests in the Midwestern United States, where plots differed in their abundance of arbuscular (AM)‐ vs. ectomycorrhizal (ECM)‐associated trees. Hyphal production rates increased linearly with the percentage of ECM trees and annual production rates were 66% higher in ECM‐ than AM‐dominated plots. Hyphal turnover rates did not differ across the mycorrhizal gradient (plots varying in their abundance of AM vs. ECM trees), suggesting that the greater fungal biomass in ECM‐dominated plots relates to greater fungal production rather than slower fungal turnover. Differences in hyphal production across the gradient aligned with distinctly different fungal communities and activities. As ECM trees increased in dominance, fungi inside ingrowth bags produced more extracellular enzymes involved in degrading nitrogen (N)‐bearing relative to C‐bearing compounds, suggesting greater fungal (and possibly plant) N demand in ECM‐dominated soils. Collectively, our results demonstrate that shifts in temperate tree species composition that result in changes in the dominant type of mycorrhizal association may have strong impacts on Dikarya hyphal production, fungal community composition and extracellular enzyme activity, with important consequences for soil C and N cycling.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2019

Statistical analyses of reservoir and fracturing parameters for a multifractured shale oil reservoir in Mississippi

The use of multifractured horizontal wells has improved the efficiency of hydrocarbon extraction from shale gas and oil plays. It is highly desirable to estimate the characteristics of the reservoir and well fracturing through production data analysis. Production rate transient data from 16 wells in the Mississippi sections were analyzed to estimate local reservoir permeability and hydraulic fracture parameters. Key factors affecting well productivity have been identified for optimizing future well completion. Based on the theory of distance of investigation during transient linear flow, the reservoir matrix permeability of TMS was estimated to be between 53 nd and 210 nd, averaging at 116 nd. The matrix permeability follows the lognormal distribution and is considered homogeneous according to the coefficient of variation. The fracture half-length was estimated using the matrix permeability data from the rate transient analysis. The fracture half-length was found to have a mean value of 234 ft with a standard deviation of 66 ft in a normal distribution. The fracture conductivity was back-calculated by matching pseudosteady production rate data to Guo et al's (SPE Reserve Eval Eng.12, 2009, 879) productivity model for boundary-dominated flow. The fracture conductivity was estimated to range from 0.4 md-ft to 3.2 md-ft, averaging at 1.4 md-ft. Based on Guo et al's (SPE Reserve Eval Eng.12, 2009, 879) well productivity model applied to TMS condition, well productivity can be improved significantly by increasing fracture length and conductivity. Future TMS wells should be completed with conductivity values of greater than 10 md-ft.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2015

A review of stereotactic body radiotherapy – is volumetric modulated arc therapy the answer?

Stereotactic body radiotherapy (SBRT) is a high precision radiotherapy technique used for the treatment of small to moderate extra-cranial tumours. Early studies utilising SBRT have shown favourable outcomes. However, major disadvantages of static field SBRT include long treatment times and toxicity complications. Volumetric modulated arc therapy (VMAT) and intensity modulated radiotherapy (IMRT) may potentially mitigate these disadvantages. This review aims to assess the feasibility of emerging VMAT and IMRT-based SBRT treatment techniques and qualify which offers the best outcome for patients, whilst identifying any emerging and advantageous SBRT planning trends. A review and synthesis of data from current literature up to September 2013 was conducted on EMBASE, Medline, PubMed, Science Direct, Proquest central, Google Scholar and the Cochrane Database of Systematic reviews. Only full text papers comparing VMAT and or IMRT and or Static SBRT were included. Ten papers were identified that evaluated the results of VMAT/IMRT SBRT. Five related to medically inoperable stage 1 and 2 non-small-cell lung cancer (NSCLC), three to spinal metastasis, one related to abdominal lymph node malignancies, with the final one looking at pancreatic adenocarcinoma. Overall treatment times with VMAT were reduced by 66–70% for lung, 46–58% for spine, 42% and 21% for lymph node and pancreatic metastasis respectively, planning constraints were met with several studies showing improved organs at risk sparing with IMRT/VMAT to static SBRT. Both IMRT and VMAT were able to meet all planning constraints in the studies reviewed, with VMAT offering the greatest treatment efficiency. Early clinical outcomes with VMAT and IMRT SBRT have demonstrated excellent local control and favourable survival outcomes.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2023

Mitigating the allergenicity of peanut allergen Ara h 1 by cold atmospheric pressure argon plasma jet

Abstract BACKGROUND Peanut allergy is recognized as a major food allergy that triggers severe and even fatal symptoms. Avoidance of peanuts in the diet is the main option for current safety management. Processing techniques reducing peanut allergenicity are required to develop other options. Cold plasma is currently considered as a novel non‐thermal approach to alter protein structure and has the potential to alleviate immunoreactivity of protein allergen. RESULTS The application of a cold argon plasma jet to peanut protein extract could reduce the amount of a 64 kDa protein band corresponding to a major peanut allergen Ara h 1 using sodium dodecyl sulfate–polyacrylamide gel electrophoresis, but the overall protein size distribution did not change significantly. A decrease in peanut protein solubility was a possible cause that led to the loss of protein content in the soluble fraction. Immunoblotting and enzyme‐linked immunosorbent assay elucidated that the immunoreactivity of Ara h 1 was significantly decreased with the time treated with plasma. Ara h 1 antigenicity reduced by 38% after five scans (approximately 3 min) of cold argon plasma jet treatment, and the reduction was up to 66% after approximately 15 min of treatment. CONCLUSION The results indicate that cold argon plasma jet treatment could be a suitable platform for alleviating the immunoreactivity of peanut protein. This work demonstrates an efficient, compact, and rapid platform for mitigating the allergenicity of peanuts, and shows great potential for the plasma platform as a non‐thermal technique in the food industry. © 2023 Society of Chemical Industry.

Hsu, Fu‐Chiun↗
DOE OSTI2025

AAPM Truth‐based CT (TrueCT) reconstruction grand challenge

Background: This Special Report summarizes the 2022, AAPM grand challenge on Truth-based CT image reconstruction. Purpose: To provide an objective framework for evaluating CT reconstruction methods using virtual imaging resources consisting of a library of simulated CT projection images of a population of human models with various diseases. Methods: Two hundred unique anthropomorphic, computational models were created with varied diseases consisting of 67 emphysema, 67 lung lesions, and 66 liver lesions. The organs were modeled based on clinical CT images of real patients. The emphysematous regions were modeled using segmentations from patient CT cases in the COPDGene Phase I dataset. For the lung and liver lesion cases, 1–6 malignant lesions were created and inserted into the human models, with lesion diameters ranging from 5.6 to 21.9 mm for lung lesions and 3.9 to 14.9 mm for liver lesions. The contrast defined between the liver lesions and liver parenchyma was 82 ± 12 HU, ranging from 50 to 110 HU. Similarly, the contrast between the lung lesions and the lung parenchyma was defined as 781 ± 11 HU, ranging from 725 to 805 HU. For the emphysematous regions, the defined HU values were −950 ± 17 HU ranging from −918 to −979 HU. The developed human models were imaged with a validated CT simulator. The resulting CT sinograms were shared with the participants. The participants reconstructed CT images from the sinograms and sent back their reconstructed images. Further, the reconstructed images were then scored by comparing the results against the corresponding ground truth values. The scores included both task-generic (root mean square error [RMSE] and structural similarity matrix [SSIM]), and task-specific (detectability index [d’] and lesion volume accuracy) metrics. For the cases with multiple lesions, the measured metric was averaged across all the lesions. To combine the metrics with each other, each metric was normalized to a range of 0 to 1 per disease type, with “0” and “1” being the worst and best measured values across all cases of the disease type for all received reconstructions. Results: The True-CT challenge attracted 52 participants, out of which 5 successfully completed the challenge and submitted the requested 200 reconstructions. Across all participants and disease types, SSIM absolute values ranged from 0.22 to 0.90, RMSE from 77.6 to 490.5 HU, d’ from 0.1 to 64.6, and volume accuracy ranged from 1.2 to 753.1 mm3. The overall scores demonstrated that participant “A” had the best performance in all categories, except for the metrics of d’ for lung lesions and RMSE for liver lesions. Participant “A” had an average normalized score of 0.41 ± 0.22, 0.48 ± 0.32, and 0.42 ± 0.33 for the emphysema, lung lesion, and liver lesion cases, respectively. Conclusions: The True-CT challenge successfully enabled objective assessment of CT reconstructions with the unique advantage of access to a diverse population of diseased human models with known ground truth. This study highlights the significant potential of virtual imaging trials in objective assessment of medical imaging technologies.

60 APPLIED LIFE SCIENCES↗