Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “yield strength”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Bright NIR‐II Photoluminescence in Rod‐Shaped Icosahedral Gold Nanoclusters

Abstract Fluorophores with high quantum yields, extended maximum emission wavelengths, and long photoluminescence (PL) lifetimes are still lacking for sensing and imaging applications in the second near‐infrared window (NIR‐II). In this work, a series of rod‐shaped icosahedral nanoclusters with bright NIR‐II PL, quantum yields up to ≈ 8%, and a peak emission wavelength of 1520 nm are reported. It is found that the bright NIR‐II emission arises from a previously ignored state with near‐zero oscillator strength in the ground‐state geometry and the central Au atom in the nanoclusters suppresses the non‐radiative transitions and enhances the overall PL efficiency. In addition, a framework is developed to analyze and relate the underlying transitions for the absorptions and the NIR‐II emissions in the Au nanoclusters based on the experimentally defined absorption coefficient. Overall, this work not only shows good performance of the rod‐shaped icosahedral series of Au nanoclusters as NIR‐II fluorophores, but also unravels the fundamental electronic transitions and atomic‐level structure‐property relations for the enhancement of the NIR‐II PL in gold nanoclusters. The framework developed here also provides a simple method to analyze the underlying electronic transitions in metal nanoclusters.

Li, Qi↗
DOE OSTI2020

A framework for quantitative analysis of spectral data in two channels

Simultaneous acquisition of emission intensity from two channels in dual-color fluorescence measurements can be used to determine the spectral properties of an emitter. We detail a method to extract quantitative information from dual-color measurements by considering two models: a single spectral component model for peak wavelength determination and a dual spectral component model for relative strength determination. The former model is useful for spectral characterization and establishing heterogeneity within an emitter species, while the latter model is useful for analyzing energy transfer efficiency. Both models are formalized to yield probability distributions that reflect uncertainties due to shot noise. We applied these analysis tools to single-particle measurements of CdSe/CdS quantum dots. Isolated emitters had narrow spectral-intensity distributions that reflected their static emission profiles and fluorescence stability. Small assemblies of mixed donor/acceptor particles exhibited dynamic behavior where emission configuration changes reveal different spectral characteristics due to energy transfer.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Development of Lightweight Structural Materials with Improved Properties for Fission Batteries

The notion of a “fission battery” conveys a vision focused on realizing very simple “plug-and-play” nuclear systems that can be integrated into a variety of applications requiring affordable, reliable energy in the form of electricity and/or heat and function without operations and maintenance staff. Fission batteries require lightweight structural materials to increase their mobility, and the lightweight materials must demonstrate structural resilience under various conditions. The objective of this work is to develop lattice structured lightweight structural material featuring a good combination of mechanical properties using advanced modeling and simulation together with an advanced additive manufacturing technique such as laser powder bed fusion. The preliminary results show that different lattice structures and types can be successfully meshed using nTopology software, and the lattice structure data can be successfully transformed to Multiphysics Object-Oriented Simulation (MOOSE) Environment input. Finite Element Analysis (FEA) displays that, at macro/engineering scale simulation, the weight saving design has an obvious effect on tensile behavior such as effective elastic modulus and yield stress. The novel approaches of this work are (1) development of lattice structures for improved mechanical properties using advanced simulation and modeling techniques; and (2) model predictions of the mechanical properties (e.g., strength and stress distribution) of macroscopic materials in order to preliminarily select a lattice structure for additive manufacturing.

36 MATERIALS SCIENCE↗
DOE OSTI2024

COMPUTER-AIDED LATTICE DESIGN AND ADVANCED MODELING FOR THE DEVELOPMENT OF LIGHTWEIGHT STRUCTURAL MATERIALS

The notion of a “fission battery” conveys a vision focused on realizing very simple “plug-and-play” nuclear systems that can be integrated into a variety of applications requiring affordable, reliable energy in the form of electricity and/or heat and function without operations and maintenance staff. Fission batteries require lightweight structural materials to increase their mobility, and the lightweight materials must demonstrate structural resilience under various conditions. The objective of this work is to develop lattice structured lightweight structural material featuring a good combination of mechanical properties using advanced modeling and simulation together with an advanced additive manufacturing technique such as laser powder bed fusion. The preliminary results show that different lattice structures and types can be successfully meshed using nTopology software, and the lattice structure data can be successfully transformed to Multiphysics Object-Oriented Simulation (MOOSE) Environment input. Finite Element Analysis (FEA) displays that, at macro/engineering scale simulation, the weight saving design has an obvious effect on tensile behavior such as effective elastic modulus and yield stress. The novel approaches of this work are (1) development of lattice structures for improved mechanical properties using advanced simulation and modeling techniques; and (2) model predictions of the mechanical properties (e.g., strength and stress distribution) of macroscopic materials in order to preliminarily select a lattice structure for additive manufacturing.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Engineering giant excitonic coupling in bioinspired, covalently bridged BODIPY dyads

Strong excitonic coupling in photosynthetic systems is believed to enable efficient light absorption and quantitative charge separation, motivating the development of artificial multi-chromophore arrays with equally strong or even stronger excitonic coupling. However, large excitonic coupling strengths have typically been accompanied by fast non-radiative recombination, limiting the potential of the arrays for solar energy conversion as well as other applications such as fluorescent labeling. Here, in this work, we report giant excitonic coupling leading to broad optical absorption in bioinspired BODIPY dyads that have high photostability, excited-state lifetimes at the nanosecond scale, and fluorescence quantum yields of nearly 50%. Through the synthesis, spectroscopic characterization, and computational modeling of a series of dyads with different linking moieties, we show that the strongest coupling is obtained with diethynylmaleimide linkers, for which the coupling occurs through space between BODIPY units with small separations and slipped co-facial orientations. Other linkers allow for broad tuning of both the relative through-bond and through-space coupling contributions and the overall strength of interpigment coupling, with a tradeoff observed in general between the strength of the two coupling mechanisms. These findings open the door to the synthesis of molecular systems that function effectively as light-harvesting antennas and as electron donors or acceptors for solar energy conversion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Developing a New Polyolefin Precursor for Low-Cost, High-Strength Carbon Fiber

Current high-strength carbon fibers (CFs) are mostly derived from PAN polymer precursor, which are very expensive with limited usage in the high-end products. On the other hand, it has also stimulated research interest to develop new low-cost precursors and manufacturing process. Despite numerous studies, researchers have yet to develop a new polymeric precursor that is less expensive, melt-spinnable, and offers a high C-yield. In this three-year R&D project, we proposed three consecutive research phases, including (i) the development of new polyolefin-based precursors that can be thermally transformed to C material in one heating step under inert atmosphere and achieved a C-yield >80%, which is more than 60% higher than that of current PAN precursor, (ii) With the suitable new polyolefin-based precursor, we can focus on CF manufacturing process, including fiber spinning, stabilization, and carbonization, to form high quality carbon fibers with the desirable polymorphous morphology, and (iii) the investigation of thermal conversion process under tension for converting polyolefin-based precursor fibers to high tensile strength carbon fibers with specific graphite crystallite size, orientation of basal line, order-disorder ratio, fiber diameter, and reduced structural defect (voids). composites.

08 HYDROGEN↗
DOE OSTI2024

Coupling Between Electrons and Charge Density Wave Fluctuation and its Possible Role in Superconductivity

In most charge density wave (CDW) systems of different material classes, ranging from traditional correlated systems in low-dimension to recent topological systems with Kagome lattice, superconductivity emerges when the system is driven toward the quantum critical point (QCP) of CDW via external parameters of doping and pressure. Despite this rather universal trend, the essential hinge between CDW and superconductivity has not been established yet. Here, the evidence of coupling between electron and CDW fluctuation is reported, based on a temperature- and intercalation-dependent kink in the angle-resolved photoemission spectra of 2H-Pd x TaSe 2 . Kinks are observed only when the system is in the CDW phase, regardless of whether a long- or short-range order is established. Notably, the coupling strength is enhanced upon long-range CDW suppression, albeit the coupling energy scale is reduced. Interestingly, the estimation of the superconducting critical temperature by incorporating the observed coupling characteristics into McMillan's equation yields results closely resembling the known values of the superconducting dome. The results thus highlight a compelling possibility that this new coupling mediates Cooper pairs, which provides new insights into the competing relationship not only for CDW but also for other competing orders.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

From broadband biphotons to frequency combs via spectral compression with time-varying cavities

Biphoton frequency combs are promising resources for quantum networking due in large part to their compatibility with the telecommunication infrastructure. Here, in this work, we propose a method to periodically compress broadband frequency-entangled photons into biphoton frequency combs by utilizing time-varying linear cavities. Our approach hinges on rapid modulation of the input cavity coupling, yielding high spectral purity in each output comb line similar to that achieved with narrowband filters, but without the associated loss in flux. We examine the dependence of spectral purity and compression on coupling strength, cavity loss, and switching speed, finding realistic regimes supporting purities in excess of 0.999 and peak enhancement factors of 100× and beyond.

Myilswamy, Karthik V. [Purdue Univ., West Lafayett↗
DOE OSTI2024

Development of Lightweight Structural Materials with Improved Properties for Fission Batteries

The notion of a “fission battery” conveys a vision focused on realizing very simple “plug-and-play” nuclear systems that can be integrated into a variety of applications requiring affordable, reliable energy in the form of electricity and/or heat and function without operations and maintenance staff. Fission batteries require lightweight structural materials to increase their mobility, and the lightweight materials must demonstrate structural resilience under various conditions. The objective of this work is to develop lightweight structural material featuring a good combination of mechanical properties using advanced modeling and simulation together with an advanced additive manufacturing technique such as laser powder bed fusion. The preliminary results show that different lattice structures and types can be successfully meshed using nTopology software, and the lattice structure data can be successfully transformed to Multiphysics Object-Oriented Simulation Environment (MOOSE) input. Finite Element Analysis (FEA) displays that, at macro/engineering scale simulation, the weight saving design has an obvious effect on tensile behavior such as effective elastic modulus and yield stress. The novel approaches of this work are (1) development of optimized lattice structures for improved mechanical properties using advanced simulation and modeling techniques; and (2) model predictions of the mechanical properties (e.g., strength and stress distribution) of macroscopic materials in order to preliminarily select a lattice structure for additive manufacturing.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Impact of mid- Z gas fill on dynamics and performance of shock-driven implosions at the OMEGA laser

Shock-driven implosions with 100% deuterium (D 2 ) gas fill compared to implosions with 50:50 nitrogen-deuterium (N 2 ⁢D 2 ) gas fill have been performed at the OMEGA laser facility to test the impact of the added mid-Ζ fill gas on implosion performance. Ion temperature (Τ ion ) as inferred from the width of measured DD-neutron spectra is seen to be 34%±6% higher for the N 2⁢ D 2 implosions than for the D 2 -only case, while the DD-neutron yield from the D 2 -only implosion is 7.2±0.5 times higher than from the N 2⁢ D 2 gas fill. The T ion enhancement for N 2 ⁢D 2 is observed in spite of the higher Z, which might be expected to lead to higher radiative loss, and higher shock strength for the D 2 -only versus N 2 ⁢D 2 implosions due to lower mass, and is understood in terms of increased shock heating of N compared to D, heat transfer from N to D prior to burn, and limited amount of ion-electron-equilibration-mediated additional radiative loss due to the added higher-Z material. Further, this picture is supported by interspecies equilibration timescales for these implosions, constrained by experimental observables. The one-dimensional (1D) kinetic Vlasov-Fokker-Planck code ifp and the radiation hydrodynamic simulation codes hyades (1D) and xrage [1D, two-dimensional (2D)] are brought to bear to understand the observed yield ratio. Comparing measurements and simulations, the yield loss in the N 2 ⁢D 2 implosions relative to the pure D 2 -fill implosion is determined to result from the reduced amount of D 2 in the fill (fourfold effect on yield) combined with a lower fraction of the D 2 fuel being hot enough to burn in the N 2 ⁢D 2 case. The experimental yield and T ion ratio observations are relatively well matched by the kinetic simulations, which suggest interspecies diffusion is responsible for the lower fraction of hot D 2 in the N 2 ⁢D 2 relative to the D 2 -only case. The simulated absolute yields are higher than measured; a comparison of 1D versus 2D XRAGE simulations suggest that this can be explained by dimensional effects. The hydrodynamic simulations suggest that radiative losses primarily impact the implosion edges, with ion-electron equilibration times being too long in the implosion cores. The observations of increased T ion and limited additional yield loss (on top of the fourfold expected from the difference in D content) for the N 2 ⁢D 2 versus D 2 -only fill suggest it is feasible to develop the platform for studying CNO-cycle-relevant nuclear reactions in a plasma environment.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Analyzing Next-Generation Supply Chains Using the Materials Flows through Industry Tool

The Materials Flows through Industry (MFI) tool is a supply chain modeling tool developed at the National Renewable Energy Laboratory (NREL) with funding from the Department of Energy's Advanced Manufacturing Office. MFI was created to identify and analyze opportunities to reduce the energy and carbon intensities of the U.S. industrial sector (Hanes and Carpenter 2017). In this work, we present an overview of the MFI tool's structure and capabilities, as well as the results of using MFI to analyze a novel NREL-developed process to 'upcycle' PET plastic into higher-value composite materials (Rorrer et al. 2019). This process combines recycled PET (rPET) plastic with inputs that can be derived from biomass, including muconic acid, acrylic acid, and ethylene glycol, to chemically break down the plastic back to its monomers in a process called glycolization. Then, repolymerization and the application of fiberglass yields the valuable glass fiber reinforced plastic (GFRP) composite, a performance material used in the manufacture of wind turbine blades, boat hulls, and other applications. This rPET-derived GFRP was found to have superior strength and fiberglass adhesion compared to conventional GFRP formulations. Our findings indicate that this GFRP production process, were it to be widely commercialized beyond its current lab-scale, could potentially reduce the fossil energy intensity of the GFRP supply chain by between 37% and 58% compared to the conventional method of GFRP manufacture from fossil-derived inputs. We also estimate potential supply chain greenhouse gas (GHG) emissions reductions between 30% and 40% from this process. Scaling these GHG offset estimates up to annual GFRP production in the U.S. would be roughly equivalent to removing between 150,000 and 200,000 vehicles from U.S. roads. These ranges of impact estimates represent the range of differences associated with the various economic allocation methods we have assumed for the intensity contributions from the first life of the PET plastic. Following Shen et al. (2010), we derive economic allocation factors from the current price ratios of clear- and green-colored recycled PET plastic to virgin PET resin ('waste-valuation' approach) or assume them to be zero in a more simplistic allocation ('cutoff' approach). Future work involving the MFI modeling tool will also be discussed, including preliminary results comparing the energy intensity of conventional and bio-based nylons manufacturing. Attendees will also be encouraged to conduct MFI supply chain modeling of their own by requesting a user account on the MFI web application, which is freely available to the public at the following address: https://mfitool.nrel.gov.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Surviving nanoscale interfacial stability in extreme thermal expansion contrast Zn(CN) 2 -epoxy resin matrix composites

Here, we report the remarkable stability at the nanoscale matrix-filler interface in a series of overall low coefficient of thermal expansion (CTE) zinc cyanide (ZC)/epoxy resin composites. These interfaces demonstrate the stability of highly contrasting materials. These composites are designed to optimize the properties of both materials: epoxy resins are valued for their high strength, superb chemical resistance, low dielectric properties, and adhesive abilities. ZC, a model flexible framework, exhibits negative thermal expansion (NTE) behavior and compensates for the epoxy resin’s detrimentally large thermal expansion values. Filled resins minimize the native 65 ppm/°C CTE values to 19 ppm/° C over a wide temperature range while maintaining linearity, yielding composites compatible with typical metal and ceramic substrates’—commonly bonded to the resin— 0–20 ppm/° C CTE values. Additionally, with significant intrinsic differences in the materials, we use wide-angle X-ray diffraction and atomic force microscopy to elucidate thermal movement. The ZC/epoxy interface is surprisingly resilient over 1,000 cycles between -55° C and 75° C, extremes typical to aerospace applications. Further, we show that the resin viscosity remains less than 21 Pa*s at up to 30 vol% ZC, an important consideration for workability. We also discuss settling distribution, glass transition temperature, flexural strength, and longevity. All results point favorably towards practical implementation in low thermal expansion application needs: filling the gap in component design.

42 ENGINEERING↗
DOE OSTI2021

Terephthalic Acid Copolyesters Containing Tetramethylcyclobutanediol for High‐Performance Plastics

Abstract There is a need for high‐performance applications for terephthalic acid (TPA) polyesters with high heat resistance, impact toughness, and optical clarity. Bisphenol A (BPA) based polycarbonates and polyarylates have such properties, but BPA is an endocrine disruptor. Therefore, new TPA polyesters that are less hazardous to health and the environment are becoming popular. Tetramethylcyclobutanediol (TMCD) is a difunctional monomer that can be polymerized with TPA and other diols to yield copolyesters with superior properties to conventional TPA polyesters. It has a cyclobutyl ring that makes it more rigid than cyclohexanedimethanol (CHDM) and EG. Thus, TMCD containing TPA copolyesters can have high heat resistance and impact strength. TPA can be made from abundantly available upcycled polyethylene terephthalate (PET). Therefore, this review discusses the synthesis of monomers and copolyesters, the impact of diol composition on material properties, molecular weight, effects of photodegradation, health safety, and substitution of cyclobutane diols for future polyesters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Discovering Dark Matter with the MUonE Experiment

The MUonE experiment aims to extract the hadronic contribution to the muon anomalous magnetic moment from a precise measurement of the muon-electron differential scattering cross section. We show that MUonE can also discover thermal relic dark matter using only its nominal experimental setup. Our search strategy is sensitive to models of dark matter in which pairs of pseudo-Dirac fermions are produced in muon-nucleus scattering in the target, and the heavier state decays semivisibly to yield dilepton pairs displaced downstream from the interaction point. This approach can probe sub-GeV thermal-relic dark matter whose cosmological abundance is governed by the same model parameters that set the MUonE signal strength. Furthermore, our results show that the downstream electron calorimeter plays a key role in rejecting backgrounds for this search, thereby providing strong motivation for the MUonE to keep this component in the final experimental design. Published by the American Physical Society 2025

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Can a transport model predict inverse signatures in Lithium metal batteries without modifying kinetics?

In this study, a one-dimensional transport model is developed and analyzed that predicts the inverse signatures obtained in lithium metal batteries. This simple approach’s ability to predict inverse signatures stems from the competing interplay between moving boundary rates and mass transfer limitations to yield inverse signatures without modifying the kinetics. The numerical scheme used for the present model simulations is presented in detail which has been further used to study the effect of design parameters on the prevalence and strength of inverse signatures. It was found that the proposed model and the analysis is more pertinent to thick symmetric cells, commonly used for in-depth fundamental studies.

model, transport, dendrite, lithium metal battery,↗
DOE OSTI2024

Detonation structure in the presence of mixture stratification using reaction-resolved simulations

Many investigations of detonation-based combustors have identified reactant mixture inhomogeneity as having a leading-order impact on wave dynamics and combustion efficiency. To examine this phenomenon in a simplified context, an array of two- and three-dimensional channel detonation simulations are conducted in the present work. The reactant mixture consists of stratified fuel and air, wherein the randomly distributed equivalence ratio field features a characteristic stratification length scale. Detailed chemical kinetics are implemented in an adaptive mesh refinement solution framework where the region near the shock front is resolved with Ο (100) cells per representative ZND induction length. The results show that in comparison to baseline cases with uniform reactant mixtures, reactant stratification has a marked impact on the detonation structure. Increasing the stratification length scale increases the size and irregularity of the detonation cells, yielding larger variations in wave speed. Triple point collisions in fuel-rich regions lead to local wave speeds above the notional mean CJ speed, but wave passage through inert regions causes the local wave speed and strength to diminish. Further, conditional statistics show that increasing the stratification length scale increases the variance in pressure and temperature in the primary reaction zone, as well as the variance in heat release over a range of mixture conditions. In addition to the reactant mixture, the impact of the boundary condition behind the detonation is also investigated. The results show that an inflow boundary condition acts to over-drive the wave, leading to higher peak pressures, smaller detonation cells, and increased reactant consumption. On the other hand, cases with a wall behind the wave exhibit weaker waves with lower peak pressures and heat release rates, as well as greater variance in conditional quantities. Comparisons between complementary two- and three-dimensional simulations show reasonable qualitative agreement in wave structure, speed, and conditional statistics.

42 ENGINEERING↗
DOE OSTI2025

Probing the shear-induced microstructure of a smectite clay aqueous suspensions using rheo-USANS and rheo-SIPLI measurements

Hypothesis: The static microstructure of aqueous sodium-montmorillonite (Na-Mt) suspensions at low ionic strengths (where Particle Size/Debye Length ≈1) exhibits both the particle–particle ordering as well as aggregation with repulsive ordered domains having characteristic optical birefringence and attractive aggregated entities larger than 20 µm resulting in ever-increasing yield stresses also known as physical aging-rejuvenation behavior. We hypothesize that the attractive particle–particle aggregation is the underlying cause behind the physical aging-rejuvenation behavior observed in Na-Mt suspensions with no contribution from structural dynamics driven by repulsive particle–particle ordering or jamming. Experiments: We investigate the shear-induced microstructure of aqueous Na-Mt suspensions in the sol and gel state using rheo-ultra-small angle neutron scattering (rheo-USANS) experiments at shear rates of 1, 50, 500, and 2000 s −1 . We also perform rheo-shear-induced polarization light imaging (rheo-SIPLI) experiments to relate ordering with shearing and aging. Findings: Shearing the suspensions at low to moderate shear rates induces particle–particle aggregation and shearing at high shear rates induces the breakage of particle–particle aggregation in the sol and gel states, suggesting the microstructural aggregation in the sol and gel state is shear sensitive and a full rejuvenation or breakage of particle–particle aggregation is only achieved at a minimum critical shear rate. The rheo-SIPLI experiments reveal that the sol and gel state exhibited strong Maltese cross patterns at a shear rate of 1000 s −1 , indicating particle–particle ordering. Post shearing, the gel exhibited temporal evolution of storage modulus without any noticeable influence on the appearance of the Maltese cross pattern indicating physical aging and particle ordering are distinct length scale phenomena in Na-Mt suspensions and the physical aging-rejuvenation behaviour is a feature of particle–particle aggregation as opposed to ordering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Temperature Inversions below 1 km from a V-Band Scanning Radiometer at the North Slope of Alaska

A single-channel (56.7 GHz) scanning radiometer was deployed in August 2022 at the Atmospheric Radiation Measurement (ARM) North Slope of Alaska site near Utqiaġvik. The radiometer is designed to provide temperature profiles between 0 and 1 km every 5 min. Averaging kernels show that this single-channel radiometer, taking observations at 10 discrete elevation angles, yields approximately the same information as a seven-channel V-band radiometer scanning three elevation angles. The instrument is able to reproduce the occurrence of temperature inversions between the surface and 1 km and their strength showing a correlation of 0.85, bias of −0.6 K, and slope of 1.04 with respect to radiosondes. Uncertainty in the inversion base height varies from 50 m near the surface to ∼300 m above 0.4 km when compared with radiosondes. Conversely, the inversion top height is overestimated and has higher uncertainty due to the degrading effects of the averaging kernels on the vertical resolution of the retrievals. Thanks to the high temporal resolution of the retrievals, the diurnal cycle of boundary layer temperature was evaluated showing that the radiometer can capture some aspects of the boundary layer thermal structure. The present analysis provides an overview of the capabilities of this simple observing configuration for selected applications.

Atmospheric profilers↗