Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wind tunnel testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Flight and wind tunnel tests of an electro-impulse de-icing system

A joint University-Industry project has been sponsored by NASA Lewis Research Center to develop the Electro-Impulse method for de-icing aircraft. The program has consisted of basic analyses, laboratory testing, icing tunnel tests, and flight tests. During the past two years, the EIDI system has been tested and refined, and has been shown to be a low-energy, highly reliable de-icing system for a wide range of conditions. This paper gives a brief review of conditions. This paper gives a brief review of the basic principles, the development history, and results of recent flight tests by NASA and by Cessna Aircraft Company.

Zumwalt, G. W.↗
NASA NTRS1985

Measurements of water film characteristics on airfol surfaces from wind-tunnel tests with simulated heavy rain

This paper discusses some of the surface water characteristics obtained during recent simulated heavy rain experiments conducted at the Langley Research Center. Water film distributions and discrete film thickness measurements on several model wings are discussed. The water film distributions on the upper surfaces are shown in photographs from cameras mounted above the models, and film thickness data are presented which were obtained using resistance sensors mounted flush with the upper and lower wing model surfaces. The paper also discusses potential sources of performance decrements indicated by the data.

Hastings, E. C., Jr.↗
NASA NTRS1986

Rotor performance characteristics from an aeroacoustic helicopter wind-tunnel test program

An investigation of helicopter rotor noise at model scale was conducted in the Langley 4 by 7 meter tunnel. The program described was the first of a planned three-phase project whose purpose was to examine the characteristic noise mechanism involved in main rotor/tail rotor interaction noise. This first phase was conducted with a main rotor only, in order to identify the characteristic noise generated by only the main rotor. The aerodynamic operating conditions of the rotor system were defined during the test. The acoustic data were properly referenced.

Hoad, D. R.↗
NASA NTRS1987

Wind tunnel test results of heavy rain effects on airfoil performance

The effects of simulated heavy rain on the aerodynamic characteristics of a NACA 64-210 airfoil section equipped with high-lift devices were investigated in the NASA Langley 14- by 22-Foot Subsonic Tunnel. The experiment was part of an on-going NASA program to determine the effect of heavy rain on airplane performance, and was directed at providing insight into scaling laws for subscale model testing of rain effects. The model used in the investigation had a chord of 2.5 feet, a span of 8.0 feet, and was mounted on the tunnel centerline between two large endplates. A water spray distribution system was located 10 chord lengths upstream of the model. The sensitivity of test results to partial-span coverage of the model in the simulated rain environment as compared to full-span coverage was also investigated. The lift and drag data obtained for the high-lift configuration show excellent repeatability of results compared to the previous data. Results obtained for various spray concentrations and tunnel speeds showed significant losses in maximum lift capability, a decrease in the angle of attack for maximum lift, and an increase in drag as the stimulated rain rate was increased. The test results also indicated that the data were not strongly affected by surface tension effects for the high-lift configuration.

Bezos, G. M.↗
NASA NTRS1987

Designing transonic wind-tunnel test sections for flow diagnostics and laser velocimeter applications

The design, fabrication, and validation of the Basic Aerodynamic Facility (BARF), developed for the direct comparison of three-dimensional laser velocimetry (LV) and hot-wire techniques at transonic speeds, are discussed. To accommodate the installation of the three-dimensional orthogonal LV system in the BARF, the transonic slots were redesigned to house windows, and the test section mounting was redesigned to facilitate LV transversing. Two-dimensional and three-dimensional code validation tests of the LV test section showed uniform mean flow through the test section to sonic speeds, and fluctuating pressure measurements at subsonic speeds which are consistent with facilities with good flow quality.

Jones, G. S.↗
NASA NTRS1989

Application of a PC based, real-time, data-aquisition system in rotorcraft wind-tunnel testing

Data has been acquired for a rotocraft test in the NASA Langley Transonic Dynamics Tunnel using a desktop data acquisition system. The system, which consists of an IBM Personal Computer AT (PC-AT) and an Omega Engineering OM-900 Stand-Alone Interface System, is well suited for acquiring high speed data on a limited number of channels. The data acquisition system and the interrupt driven software which provides the capability for near real-time cyclic data acquisition as well as data storage and display are described.

Wilbur, Matthew L.↗
NASA NTRS1986

Analysis of results from wind tunnel tests of inlets for an advanced turboprop nacelle installation

Inlets for tractor installations of advanced turboprop propulsion systems were tested in three phases, covering a period from November, 1982 to January, 1984. Nacelle inlet configuration types included single scoop, twin scoop, and annular arrangements. Tests were performed with and without boundary layer diverters and several different diverter heights were tested for the single scoop inlet. This same inlet was also tested at two different axial positions. Test Mach numbers ranged from Mach 0.20 to 0.80. Types of data taken were: (1) internal and external pressures, including inlet throat recoveries; (2) balance forces, including thrust-minus-drag; and (3) propellar blade stresses.

Hancock, J. P.↗
NASA NTRS1990

Performance Data from a Wind-Tunnel Test of Two Main-rotor Blade Designs for a Utility-Class Helicopter

An investigation was conducted in the NASA Langley Transonic Dynamics Tunnel to evaluate an advanced main rotor designed for use on a utility class helicopter, specifically the U.S. Army UH-60A Blackhawk. This rotor design incorporated advanced twist, airfoil cross sections, and geometric planform. For evaluation purposes, the current UH-60A main rotor was also tested and is referred to as the baseline blade set. A total of four blade sets were tested. One set of both the baseline and the advanced rotors were dynamically scaled to represent a full scale helicopter rotor blade design. The remaining advanced and baseline blade sets were not dynamically scaled so as to isolate the effects of structural elasticity. The investigation was conducted in hover and at rotor advance ratios ranging from 0.15 to 0.4 at a range of nominal test medium densities from 0.00238 to 0.009 slugs/cu ft. This range of densities, coupled with varying rotor lift and propulsive force, allowed for the simulation of several vehicle gross weight and density altitude combinations. Performance data are presented for all blade sets without analysis; however, cross referencing of data with flight condition may be useful to the analyst for validating aeroelastic theories and design methodologies as well as for evaluating advanced design parameters.

Singleton, Jeffrey D.↗
NASA NTRS1991

Low-Speed Wind-Tunnel Test of an Unpowered High-Speed Stoppable Rotor Concept in Fixed-Wing Mode

An experimental investigation of the M85, a High Speed Rotor Concept, was conducted at the NASA Langley 14 x 22 foot Subsonic Tunnel, assisted by NASA-Ames. An unpowered 1/5 scale model of the XH-59A helicopter fuselage with a large circular hub fairing, two rotor blades, and a shaft fairing was used as a baseline configuration. The M85 is a rotor wing hybrid aircraft design, and the model was tested with the rotor blade in the fixed wing mode. Assessments were made of the aerodynamic characteristics of various model rotor configurations. Variation in configurations were produced by changing the rotor blade sweep angle and the blade chord length. The most favorable M85 configuration tested included wide chord blades at 0 deg sweep, and it attained a system lift to drag ratio of 8.4.

Lance, Michael B.↗
NASA NTRS1991

Vibratory Loads Data from a Wind-Tunnel Test of Structurally Tailored Model Helicopter Rotors

An experimental study was conducted in the Langley Transonic Dynamics Tunnel to investigate the use of a Bell Helicopter Textron (BHT) rotor structural tailoring concept, known as rotor nodalization, in conjunction with advanced blade aerodynamics as well as to evaluate rotor blade aerodynamic design methodologies. A 1/5-size, four-bladed bearingless hub, three sets of Mach-scaled model rotor blades were tested in forward flight from transition up to an advance ratio of 0.35. The data presented pertain only to the evaluation of the structural tailoring concept and consist of fixed-system and rotating system vibratory loads. These data will be useful for evaluating the effects of tailoring blade structural properties on fixed-system vibratory loads, as well as validating analyses used in the design of advanced rotor systems.

Yeager, William T., Jr.↗
NASA NTRS1991

30 x 60 foot wind tunnel test highlights for an over-the-tail advanced turboprop configuration

This paper presents results from a recent investigation of the static aerodynamic and stability characteristics of a two-surface advanced turboprop aircraft. The conceptual design places Hamilton Standard SR-7 turboprop blades close to the horizontal and vertical tail for potential acoustic shielding. Evaluation of the data shows generally favorable effects of power on aircraft stability and control, and that lateral directional trim can be achieved with one engine inoperative. The tests did show a marked effect of the direction of propeller rotation on thrust minus drag performance.

Coe, Paul L., Jr.↗
NASA NTRS1923

Model supports and their effects on the results of wind tunnel tests

The airflow about a model while being tested is often sufficiently affected by the model support to lead to erroneous conclusions unless appropriate corrections are used. In this paper some new material on the subject is presented, together with a review of the airfoil support corrections used in several other laboratories.

Bacon, David L↗
NASA NTRS1929

Wind Tunnel Tests on an Airfoil Equipped with a Split Flap and a Slot

The investigation described in this report is concerned with the changes in the aerodynamic characteristics of an airfoil which are produced by a gauze-covered suction slot, located near the leading edge, and connected by an air passage to a split flap at the trailing edge. The tests were conducted at the Langley Memorial Aeronautical Laboratory. At the larger values of lift coefficient where the action of the slot might be expected to be most effective, the pressure differences were such that the air flowed out of the slot rather than in through it, and in consequence, the maximum lift coefficient was decreased.

Bamber, Millard J↗
NASA NTRS1930

Refrigerated Wind Tunnel Tests on Surface Coatings for Preventing Ice Formation

This investigation was conducted to determine the effectiveness of various surface coatings as a means for preventing ice formations on aircraft in flight. The substances used as coatings for these tests are divided into two groups: compounds soluble in water, and those which are insoluble in water. It was found that certain soluble compounds were apparently effective in preventing the formation of ice on an airfoil model, while all insoluble compounds which were tested were found to be ineffective.

Knight, Montgomery↗
NASA NTRS1937

Wind-tunnel tests of a Clark Y wing with 'Maxwell' leading-edge slots

Aerodynamic force tests of a Clark Y wing equipped with "Maxwell" type leading-edge slots were conducted in the N.A.C.A. 7- by 10-foot tunnel to ascertain the aerodynamic characteristics, which involved the determination of the best slot-gap opening, the effects of slat width, and the effect of a trailing-edge flap. The Maxwell wing with a wide-chord slat (0.30 c(sub w)) and with a 0.211 c(sub w) split flap deflected 60 degrees had a C(sub L sub max) of 2.53 or about twice that of the plain wing. The wing with the wide slat also had, in general, improved aerodynamic characteristics over those of the Maxwell wing with slat, and had about the same aerodynamic characteristics as a Handley Page slotted wing with approximately the same size of slat.

Gauvain, William E↗