Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “two-dimensional”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35

Nanohybrid of Cu2O-Ti3C2Tx as a Silver-Free MXene Sorbent for Iodine Gas Capture from Nuclear Waste

The capture of volatile radioiodine from nuclear fuel reprocessing off-gas streams remains a critical challenge due to the high volatility, long half-life of 129I, and biological uptake of iodide from the environment. Although silver-based sorbents provide strong iodine chemisorption, their high cost and regulatory classification as mixed radioactive-hazardous waste motivate the development of alternative materials. Here, we report a silver-free Cu2O-Ti3C2Tx MXene hybrid for iodine gas capture at 150 °C. Structural and compositional analyses confirm the formation of Cu2O nanoparticles on Ti3C2Tx nanosheets and their subsequent conversion to thermodynamically stable CuI upon static iodine gas exposure, achieving an iodine mass loading of up to 1115 mg/g. These results demonstrate the potential of Cu2O-Ti3C2Tx MXene as a copper-based alternative to silver sorbents for elevated-temperature iodine gas capture.

iodine gas capture↗

Correlated Lattice Fluctuations in CsPbBr 3 Quantum Dots Give Rise to Long-Lived Electronic Coherence

Electronic coherence is central to numerous areas of science, from quantum biology to quantum materials. In quantum materials, lead-halide perovskite (LHP) quantum dots (QDs) have been shown to support electronic coherence through observation of coherent single-photon emission and superfluorescence arising from spatial coherence at low temperatures. In contrast, direct measurement of temporal coherence between exciton states has been lacking. Here, we employ coherent multi-dimensional spectroscopy to observe an electronic coherence between exciton states in CsPbBr 3 QDs that is long-lived at room temperature, surviving nearly three times longer than the electronic dephasing time. This observation of a long-lived electronic coherence at room temperature points to nearly perfectly correlated lattice fluctuations for each excitonic state in the superposition. In conclusion, these experiments reveal that the properties of LHP QDs extend to lattice dynamics that give rise to correlated fluctuations in the basis exciton states, a process that may next be optimized by design.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Twisted Nonlinear Optics in Monolayer van der Waals Crystals

In addition to a plethora of emergent phenomena, the spatial topology of optical vortices enables an array of applications in optical communications and quantum information science. Multibeam nonlinear optical processes, augmented by optical vortices, are essential in this context, providing robust access to an infinitely large set of quantum states associated with the orbital angular momentum of light. Here, we push the boundaries of vortex nonlinear optics to the ultimate limits of material dimensionality. By exploiting multipulse difference frequency, sum frequency, and four-wave mixing in monolayer quantum materials, we demonstrate their ability to independently control the orbital angular momentum and radial distribution of vortex light-fields in addition to their wavelength. Due to the atomically thin nature of the host crystal, this control spans a broad spectral bandwidth in a highly integrable platform that is unconstrained by the traditional limits of bulk nonlinear optical materials. Our work heralds an innovative path for ultracompact and scalable hybrid nanophotonic technologies empowered by twisted nonlinear light–matter interactions in van der Waals nanomaterials.

36 MATERIALS SCIENCE↗

Tailoring MoS 2 for Small-Molecule Electroreduction: The Role of Metal Doping and Heterostructures

The electrification of chemical transformations central to sustainable fuel production and waste valorization, such as overall water splitting (OWS), hydrogen evolution reaction (HER), and electrochemical reduction of CO 2 (CO 2 R), presents a powerful opportunity to advance carbon-neutral energy technologies. Transition metal dichalcogenides (TMDs), particularly MoS 2 , have emerged as promising electrocatalyst candidates, owing to their abundance, tunable active sites, and defect-rich structures. This review highlights recent progress in leveraging metal doping and heterostructure engineering of MoS 2 to enhance the electrocatalytic activity and selectivity. By compiling insights from experimental studies and density functional theory (DFT) predictions, we examine how defect creation, electronic structure modification, and interface design contribute to improved charge transport and catalytic efficiency. Particular emphasis is placed on rational design principles, synthetic strategies, and operando characterization methods that provide a pathway to understanding and optimizing MoS 2 -based materials. We also discuss the challenges of stability, mechanistic ambiguity, and scaling while outlining opportunities to bridge theory and experiment. Collectively, this review underscores how defect and heterostructure engineering of MoS 2 can accelerate the development of efficient, sustainable electrocatalysts for both fuel generation and waste-to-value generation.

CO2 reduction↗

Local microwave sensing of excitons and their electrical environment

Excitons in atomically thin transition metal dichalcogenides (TMDs) possess intriguing optical properties, drawing interest for both technology and fundamental research. However, as the demands for nanodevice applications and the exploration of fundamental physics push toward smaller, subwavelength scales, studying them locally is challenging. In this work, we introduce a cryogenic scanning probe photoelectrical sensing technique, termed exciton-resonant microwave impedance microscopy (ER-MIM), to measure the excitonic responses in a monolayer MoSe 2 device at 1.5K. From the microwave signal changes, we identify exciton polarons and their Rydberg states. Building on these observations, we systemically reveal the local and nonlocal effects of carrier density, inhomogeneous electric fields, as well as dielectric screening on excitons, beyond the reach of conventional probes. By further integrating deep learning techniques, we precisely extracted the electrical parameters surrounding excitons, demonstrating a quantified, exciton-assisted nanoscale electrometry. Our results provide new insight into exciton-environment interactions, establish ER-MIM as a powerful optoelectronic sensing platform, and open avenues for exciton-based quantum control and device technologies.

scanning probe microscopy↗

Moiré-controllable exciton localization and dynamics through spatially-modulated inter- and intralayer excitons in a MoSe 2 /WS 2 heterobilayer

Moiré heterobilayers exhibiting spatially varying exciton localization that can be precisely controlled through the twist angle have emerged as exciting platforms for studying complex quantum phenomena. Here, we study the exciton landscape in MoSe 2 /WS 2 heterobilayers through synergistic first-principles GW plus Bethe Salpeter equation (GW-BSE) calculations and complementary time- and angle-resolved photoemission spectroscopy (tr-ARPES). We find that the MoSe 2 /WS 2 heterobilayer has a type I band alignment at large twist angles. In contrast, at small twist angles, there exist simultaneous spatially modulated regions of local type I band alignment, hosting bright intralayer excitons, and local type II band alignment, hosting long-lived interlayer excitons, due to lattice reconstruction in different high-symmetry regions. In tr-ARPES this manifests in the observation of long-lived excitons with electron population in only MoSe 2 at large twist angles, while in samples with small twist angles, signals from two distinct long-lived exciton states with electron population in both layers are observed. Contrary to earlier studies, we find no excitonic hybridization near the low-energy absorption peaks in MoSe 2 /WS 2 , whose splitting can, instead, be explained by the lattice reconstruction.

Electronic properties and materials↗

Purcell enhancement of directional edge photocurrent in a van der Waals self-cavity

Cavities provide a means to manipulate the optical and electronic responses of quantum materials by selectively enhancing light-matter interaction at specific frequencies and momenta. While cavities typically involve external structures, exfoliated flakes of van der Waals (vdW) materials can form intrinsic self-cavities due to their small finite dimensions, confining electromagnetic fields into plasmonic cavity modes, characterized by standing-wave current distributions. While cavity-enhanced phenomena are well-studied at optical frequencies, the impact of self-cavities on nonlinear electronic responses—such as directional photocurrent—remains largely unexplored, particularly in the terahertz regime, critical for emerging ultrafast optoelectronic technologies. Here, we report a self-cavity-induced Purcell enhancement of directional photocurrents in the vdW semimetal WTe 2 . Using ultrafast optoelectronic circuitry, we measured coherent near-field THz emission resulting from nonlinear photocurrents excited at the sample edges. We observed enhanced emission at finite frequencies, tunable via excitation fluence and sample geometry, which we attribute to plasmonic interference effects controlled by the cavity boundaries. We developed an analytical theory that captures the cavity resonance conditions and spectral response across multiple devices. Our findings establish WTe 2 as a bias-free, geometry-tunable THz emitter and demonstrate the potential of self-cavity engineering for controlling nonlinear, nonequilibrium dynamics in quantum materials.

condensed-matter physics↗

Engineering phase-frustration-induced flat bands in an aza-triangulene covalent kagome lattice

π-Conjugated covalent organic frameworks provide a versatile molecular scaffold for the realization of designer quantum nanomaterials. Strong electron–electron correlation within these artificial lattices can give rise to exotic phases of matter. Their experimental realization, however, requires precise control over orbital symmetry, charge localization and band dispersion, all arising from the effective hybridization between molecular linkers and nodes. Here we present a modular strategy for constructing diatomic kagome lattices from aza-[3]triangulene nodes, in which a D 3h -symmetric ground state is stabilized through resonance contributions from a cumulenic linker. First-principles density functional theory and scanning tunnelling spectroscopy reveal that the hybridization of a sixfold-degenerate set of edge-localized Wannier functions in the unit cell gives rise to orbital-phase-frustration-induced non-trivial flat bands. These results establish a general design principle for engineering orbital interactions in organic lattices and open a pathway towards programmable covalent-organic-framework-based quantum materials with correlated electronic ground states.

conjugated polymers↗

Experimental signature of layer skyrmions and implications for band topology in twisted WSe 2 bilayers

Twisted homobilayers of transition-metal dichalcogenides have been established as an ideal platform for studying strong correlation phenomena, as exemplified by the recent discovery of fractional Chern insulator states in twisted MoTe 2 , as well as Chern insulators and unconventional superconductivity in twisted WSe 2 . In these systems, a non-trivial topology in the strongly layer-hybridized regime can arise from a spatial patterning of interlayer tunnelling amplitudes and layer-dependent potentials that yields a lattice of layer skyrmions. Here, in this work, we report experimental signatures of skyrmion textures in the layer degree of freedom of rhombohedral-stacked twisted WSe 2 homobilayers. Using scanning tunnelling spectroscopy that separately resolves the Γ-valley and K-valley moiré electronic states, we reveal opposite layer polarizations of the K valley at two different lattice sites with opposite stacking order within the moiré unit cell. These findings are consistent with the theoretically predicted layer-skyrmion texture. We also use our experimental results to parameterize a common continuum model of moiré bands in twisted bilayers, further establishing a direct correlation between the shape of the local density of states in real space and the topology of the topmost moiré band.

electronic properties and materials↗

Microscopic signatures of topology in twisted MoTe 2

In moiré materials with flat electronic bands and suitable quantum geometry, strong correlations can give rise to various topological states of matter. The non-trivial band topology of twisted MoTe 2 , which is responsible for its fractional quantum anomalous Hall states, is predicted to arise from a skyrmion lattice texture in the layer pseudospin of the electronic wavefunctions. Tracing the layer polarization of wavefunctions within the moiré unit cell can, thus, offer insights into the band topology. Here we measure the out-of-plane component of the layer-pseudospin skyrmion textures of twisted MoTe 2 using scanning tunnelling microscopy and spectroscopy. We do this by simultaneously visualizing the moiré lattice structure and the spatial localization of its electronic states. We find that the wavefunctions associated with the topological flat bands exhibit a spatially dependent layer polarization within the moiré unit cell, in agreement with our theoretical modelling. Furthermore, our work enables future local probe studies of the intertwined correlated and topological states arising in gate-tunable devices.

Electronic properties and materials↗

Robust supermoiré pattern in large-angle single-twist bilayers

Forming long-wavelength moiré superlattices in van der Waals bilayers that have a small-angle twist between the two layers has been a key approach for creating moiré flat bands. However, for small twist angles, strong lattice reconstruction creates domain walls and other forms of disorder in the moiré pattern, posing considerable challenges for engineering such platforms. At large twist angles, the lattices are more rigid, but it is difficult to produce flat bands in shorter-wavelength moiré superlattices. Here, in this study, we introduce an approach for tailoring robust supermoiré structures in bilayers of transition-metal dichalcogenides using only a single twist near a commensurate angle. Structurally, we show the spontaneous formation of a periodic arrangement of three inequivalent commensurate moiré stackings, where the angle deviation from the commensurate angle determines the periodicity. Electronically, we reveal a large set of van Hove singularities that indicate strong band hybridization, leading to flat bands near the valence band maximum. Our study extends the study of the interplay among band topology, quantum geometry and moiré superconductivity to the large twist angle regime.

electronic properties and materials↗

Field-tunable valley coupling in a dodecagonal semiconductor quasicrystal

Quasicrystals are characterized by atomic arrangements having long-range order without periodicity. Van der Waals bilayers provide an opportunity to controllably vary the atomic alignment between two layers from a periodic moiré crystal to an aperiodic quasicrystal. Here, in this work, we reveal that in a dodecagonal WSe 2 quasicrystal, two separate valleys in separate layers are brought arbitrarily close in momentum space through higher-order Umklapp scatterings. A modest perpendicular electric field is then sufficient to induce strong interlayer valley hybridization, manifested as another hybrid excitonic doublet. Concurrently, we observe the disappearance of the trion that exists at low field, which we attribute to a modified spatial distribution of the wavefunction due to the quasicrystal potential. This is possibly a precursor to localization. Our findings highlight the ability of incommensurate systems to bring any pair of momenta into close proximity, thereby introducing opportunities for valley engineering.

electronic properties and materials↗

Optical control of integer and fractional Chern insulators

Optical control of topology, particularly in the presence of electron correlations, is an interesting topic with broad scientific and technological impact. Twisted MoTe 2 bilayer (tMoTe 2 ) is a zero-field fractional Chern insulator (FCI), exhibiting the fractionally quantized anomalous Hall effect. As the chirality of the edge states and sign of the Chern number are determined by the underlying ferromagnetic polarization, manipulation of ferromagnetism would realize control of the Chern insulator (CI)/FCI states. Here, in this work, we demonstrate control of ferromagnetic polarization, and thus the CI and FCI states, by circularly polarized optical pumping in tMoTe 2 . At low excitation power, we achieve on-demand preparation of ferromagnetic polarization by optical training, that is, electrically tuning the system from non-ferromagnetic to desirable ferromagnetic states under helicity-selective optical pumping. With increased excitation power, we further realize direct optical switching of ferromagnetic polarization at a temperature far below the Curie temperature. Both optical training and direct switching are most effective near CI and FCI states, which we attribute to a gap-enhanced valley polarization of optically pumped holes. The magnetization can be dynamically switched by modulating the helicity of optical excitation. Spatially resolved measurements further demonstrate optical writing of ferromagnetic, and thus CI (or FCI) domains. Our work realizes precise optical control of a topological quantum many-body system with potential applications in topological spintronics, quantum memories and creation of exotic edge states by programmable patterning of integer and fractionally quantized anomalous Hall domains.

ferromagnetism↗

Electronic origin of reorganization energy in interfacial electron transfer

Electron transfer (ET) reactions underpin energy conversion and chemical transformations in both biological and a biological systems. The efficiency of any ET process relies on achieving a desired ET rate within an optimal driving force range. Marcus theory provides a microscopic framework for understanding the activation free energy—and therefore the rate—of ET in terms of a key parameter: the reorganization energy. For electrified solid–liquid interfaces, it has long been conventionally understood that only factors in the electrolyte phase are responsible for determining the reorganization energy and that the electronic density of states (DOS) of the electrode only serves to dictate the number of thermally accessible channels for ET. Here we show instead that the electrode DOS plays a central role in governing the reorganization energy, far outweighing its conventionally assumed role. Using atomically layered heterostructures, we tune the DOS of graphene and measure outer-sphere ET kinetics. We find the ensuing variation in ET rate arises from strong modulation in a reorganization energy associated with image potential localization in the electrode. Here we redefine the traditional paradigm of heterogeneous ET kinetics, revealing a deeper role of the electrode electronic structure in interfacial reactivity.

Electrochemistry↗

Stacking polymorphism of PtSe 2 : its implication to layer-dependent metal-insulator transitions

Using diffusion Monte Carlo (DMC) and density functional theory (DFT) calculations, we examine the structural stability and interlayer binding properties of PtSe 2 . Our DMC study reveals that AA and AB-r bilayer stacking modes are nearly degenerate, highlighting the significant role of interlayer hybridization in offsetting the energy cost due to larger interlayer separations in the AB-r mode. Additionally, our DMC-benchmarked DFT calculations with the r 2 SCAN+rVV10 functional uncover pronounced stacking polymorphism in few-layer PtSe 2 , driven by degenerate AA and AB-r interfaces, which leads to substantial band gap variations across different stacking configurations. This polymorphism, along with selenium vacancies, influences a layer-dependent metal-insulator transition observed in few-layer PtSe 2 . Our findings emphasize the importance of both van der Waals interactions and interlayer hybridization in determining the phase stability and electronic properties of PtSe 2 , advancing our understanding of its fundamental properties and refining theoretical models for practical applications in nanoelectronic devices.

Electronic materials↗

Orbital selective band re-normalization induced Lifshitz transition in TiSe 2

A Lifshitz transition is a sudden change in Fermi surface topology, often linked to quantum phenomena, with major impact on transport and sometimes superconductivity. Here we demonstrate a Lifshitz transition in TiSe 2 using micro–angle-resolved photoemission spectroscopy. At low temperatures an electron pocket appears at the Brillouin-zone center, whereas at higher temperatures spectral weight from a hole-like valence band dominates the Fermi level. Unlike previously reported cases typically driven by rigid band shifts, in TiSe 2 an orbital-selective strong band renormalization induces the crossover near 160 K. This mechanism naturally explains the longstanding resistivity anomaly of TiSe 2 , which peaks around 160 K. Our results clarify its puzzling transport behavior and open avenues to investigate how periodic lattice distortions interact with strong electronic correlations.

36 MATERIALS SCIENCE↗

Magnetic semiconductors from functionalized Cr 2 ⁢C MXenes

Here, we report an ab initio investigation of functionalized and 3⁢𝑑-electron-doped Cr 2 ⁢C MXenes. Upon functionalization, the Cr 2⁢ C becomes chemically, dynamically, and mechanically stable, and it exhibits magnetic semiconducting behavior. Cr 2 ⁢CF 2 stands out as a wide band gap semiconductor, possessing superexchange interaction mediated by F atoms within the layer; however, the applied strain transforms it from an indirect to a direct band gap semiconductor. Strong spin-phonon coupling found in Cr 2 ⁢CH 2 is supported by the distorted Cr spin density due to the hydrogen environment. Two magnon branches, associated with two sublattice spins, are found in the ferromagnetic Cr 2 ⁢CO 2 and antiferromagnetic Cr 2 ⁢CF 2 . Depending on the types of 3⁢𝑑-electron dopants and functionalization, Cr 2 ⁢C MXenes (except for Cr 2 ⁢CO 2 ) change from an indirect band gap magnetic semiconductor to different states of electronic and magnetic matter, including an exotic direct band gap magnetic bipolar semiconductor. In addition, we reveal a band inversion between the two highest valence bands in the Fe-doped Cr 2 ⁢CCl 2 .

2D materials↗

Nonlocal Coherent Optical Nonlinearities of a Macroscopic Quantum System

The optical responses of solids are typically understood to be local in space. Whether locality holds for the optical response of a macroscopic quantum system has, however, been largely unexplored. Here, we use multidimensional coherent spectroscopy at the optical diffraction limit to demonstrate nonlocal optical nonlinearities in a semiconductor microcavity. In conclusion, these nonlocal optical responses are both coherent and quantum in nature, deriving from the macroscopic length scale of confined exciton-polariton wave functions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗