Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transportation analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Sources, Sinks, and Transatlantic Transport of North African Dust Aerosol: A Multimodel Analysis and Comparison With Remote Sensing Data

This study evaluates model-simulated dust aerosols over North Africa and the North Atlantic from five global models that participated in the Aerosol Comparison between Observations and Models phase II model experiments. The model results are compared with satellite aerosol optical depth (AOD) data from Moderate Resolution Imaging Spectroradiometer (MODIS), Multiangle Imaging Spectroradiometer (MISR), and Sea-viewing Wide Field-of-view Sensor, dust optical depth (DOD) derived from MODIS and MISR, AOD and coarse-mode AOD (as a proxy of DOD) from ground-based Aerosol Robotic Network Sun photometer measurements, and dust vertical distributions/centroid height from Cloud Aerosol Lidar with Orthogonal Polarization and Atmospheric Infrared Sounder satellite AOD retrievals. We examine the following quantities of AOD and DOD: (1) the magnitudes over land and over ocean in our study domain, (2) the longitudinal gradient from the dust source region over North Africa to the western North Atlantic, (3) seasonal variations at different locations, and (4) the dust vertical profile shape and the AOD centroid height (altitude above or below which half of the AOD is located). The different satellite data show consistent features in most of these aspects; however, the models display large diversity in all of them, with significant differences among the models and between models and observations. By examining dust emission, removal, and mass extinction efficiency in the five models, we also find remarkable differences among the models that all contribute to the discrepancies of model-simulated dust amount and distribution. This study highlights the challenges in simulating the dust physical and optical processes, even in the best known dust environment, and stresses the need for observable quantities to constrain the model processes.

Africa↗
DOE OSTI2024

Preliminary Analysis of Advanced Reactor Spent Nuclear Fuel Storage, Transportation, and Disposal

Due to increased interest in advanced reactor deployment and their associated potential new fuel cycles, the U.S. Department of Energy (DOE) Spent Fuel and Waste Science and Technology (SFWST) program has begun to evaluate the possible implications of long term management and final disposition of the spent nuclear fuel (SNF) generated. Safely managing and dispositioning this SNF, along with any other associated radioactive waste, is the primary focus of this initial preliminary assessment. This paper summarizes efforts to evaluate the characteristics and packaging options for three types of advanced reactor SNF forms: (1) tristructural isotropic (TRISO), (2) metallic, and (3) irradiated fuel salt presented in the report titled “Storage, Transportation, and Disposal of Advanced Reactor Spent Nuclear Fuel and High-Level Waste”. TRISO and metallic SNF and their associated waste streams were emphasized because of the near-term anticipated demonstrations of X-energy’s Xe-100 and TerraPower and GE Hitachi’s Natrium advanced reactors. Preliminary information on spent fuel salts discharged from molten-salt reactors (MSRs) was also examined to provide a baseline for future efforts. All calculations and assumptions were based on publicly available information. This paper identifies several different reactors that produce either TRISO or metallic SNF as well as a few of the reactor and fuel characteristics used for the assessments. Based on these characteristics, calculations were performed to determine the applicability of packaging SNF into existing canister designs. The evaluations included geometric (e.g., dimension, volume) and mass/weight considerations, known operational approaches and loading procedures, physical and chemical considerations/conditions for storage environments, and as-loaded radiation, thermal, and criticality analyses to identify constraints on storage, transportation, and disposal. Gaps in publicly available data pertaining to reactor operation and/or fuel composition provide increased uncertainty in some evaluations. Additionally, uncertainty in packaging and SNF management operations provide additional uncertainty. However, preliminary conclusions can still be assessed through this work and are presented in this paper.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Preliminary Analysis of a Nuclear Grade Sandwich Composite for Transportable Micro-Reactor Shielding

Transportable microreactors pose a unique shielding challenge compared with conventional reactors. Many vendors are seeking to transport a microreactor to a site, operate it for a number of years, and then transport it to a secondary site. This involves ensuring the reactor has sufficient shielding during operations and post-irradiation transportation to ensure the safety of those around it, all while ensuring it can be transported via traditional means. This work examines the use of a nuclear grade sandwich composite (NGSC) which seeks to combine the reactor pressure vessel and biological shielding into a single unit. Through this work, it was determined that the NGSC was sufficient to adequately reduce neutron and gamma current exiting the structure to warrant further investigation as a potential shielding option for microreactors.

42 ENGINEERING↗
NASA NTRS1998

Reliability Modeling Methodology for Independent Approaches on Parallel Runways Safety Analysis

This document is an adjunct to the final report An Integrated Safety Analysis Methodology for Emerging Air Transport Technologies. That report presents the results of our analysis of the problem of simultaneous but independent, approaches of two aircraft on parallel runways (independent approaches on parallel runways, or IAPR). This introductory chapter presents a brief overview and perspective of approaches and methodologies for performing safety analyses for complex systems. Ensuing chapter provide the technical details that underlie the approach that we have taken in performing the safety analysis for the IAPR concept.

Babcock, P.↗
NASA NTRS1979

Evaluation of particle transport for the P80-1 spacecraft

Charged and neutral particle transport from an 8-cm mercury ion thruster to the surfaces of the P80-1 spacecraft, the Teal Ruby sensor and the ECOM-501 sensor was examined. Evaluation of particle transport modes utilized both laboratory measurements and analysis. Line-of-sight particle transport considered deposition of Group II (high energy-high angle mercury charge exchange) ions and neutral mercury on solar array surfaces. Nonline-of-sight transport modes studied were recirculation/reinterception of mercury ions in magnetic fields and refraction of low energy mercury charge exchange (Group IV) ions by local electric fields.

Sellen, J. M., Jr.↗
NASA NTRS1984

Operational awareness in future space transportation system concepts and technology selections

An analysis of operations for a two-stage, fully reusable future space transportation system has been performed, and the results are discussed. The value of conducting an analysis of operations in the conceptual design phase to produce a highly productive system was demonstrated by obtaining estimated reductions in resources and ground turnaround time and comparing them with estimated mature Shuttle program requirements. Cooperative efforts by users, future vehicle designers, and operations analysts during the conceptual design phase are shown to produce an efficient vehicle design with broad market potential. The synergistic effects of vehicle design configuration, subsystems, and procedures can enhance productivity of the transportation system as measured by flexibility, availability, and viability. Advanced technologies and subsystems beneficial to such a system are identified.

Eide, D. G.↗
DOE OSTI2021

Exploring Transport Behavior in Hybrid Perovskites Solar Cells via Machine Learning Analysis of Environmental-Dependent Impedance Spectroscopy

Hybrid organic–inorganic perovskites are one of the promising candidates for the next-generation semiconductors due to their superlative optoelectronic properties. However, one of the limiting factors for potential applications is their chemical and structural instability in different environments. Herein, the stability of (FAPbI3)0.85(MAPbBr3)0.15 perovskite solar cell is explored in different atmospheres using impedance spectroscopy. An equivalent circuit model and distribution of relaxation times (DRTs) are used to effectively analyze impedance spectra. DRT is further analyzed via machine learning workflow based on the non-negative matrix factorization of reconstructed relaxation time spectra. This exploration provides the interplay of charge transport dynamics and recombination processes under environment stimuli and illumination. The results reveal that in the dark, oxygen atmosphere induces an increased hole concentration with less ionic character while ionic motion is dominant under ambient air. Under 1 Sun illumination, the environment-dependent impedance responses show a more striking effect compared with dark conditions. In this case, the increased transport resistance observed under oxygen atmosphere in equivalent circuit analysis arises due to interruption of photogenerated hole carriers. The results not only shed light on elucidating transport mechanisms of perovskite solar cells in different environments but also offer an effective interpretation of impedance responses.

36 MATERIALS SCIENCE↗
NASA NTRS2012

New Approaches to Quantifying Transport Model Error in Atmospheric CO2 Simulations

In recent years, much progress has been made in observing CO2 distributions from space. However, the use of these observations to infer source/sink distributions in inversion studies continues to be complicated by difficulty in quantifying atmospheric transport model errors. We will present results from several different experiments designed to quantify different aspects of transport error using the Goddard Earth Observing System, Version 5 (GEOS-5) Atmospheric General Circulation Model (AGCM). In the first set of experiments, an ensemble of simulations is constructed using perturbations to parameters in the model s moist physics and turbulence parameterizations that control sub-grid scale transport of trace gases. Analysis of the ensemble spread and scales of temporal and spatial variability among the simulations allows insight into how parameterized, small-scale transport processes influence simulated CO2 distributions. In the second set of experiments, atmospheric tracers representing model error are constructed using observation minus analysis statistics from NASA's Modern-Era Retrospective Analysis for Research and Applications (MERRA). The goal of these simulations is to understand how errors in large scale dynamics are distributed, and how they propagate in space and time, affecting trace gas distributions. These simulations will also be compared to results from NASA's Carbon Monitoring System Flux Pilot Project that quantified the impact of uncertainty in satellite constrained CO2 flux estimates on atmospheric mixing ratios to assess the major factors governing uncertainty in global and regional trace gas distributions.

Ott, L.↗
NASA NTRS2016

Expanding the Natural Laminar Flow Boundary for Supersonic Transports

A computational design and analysis methodology is being developed to design a vehicle that can support significant regions of natural laminar flow (NLF) at supersonic flight conditions. The methodology is built in the CDISC design module to be used in this paper with the flow solvers Cart3D and USM3D, and the transition prediction modules BLSTA3D and LASTRAC. The NLF design technique prescribes a target pressure distribution for an existing geometry based on relationships between modal instability wave growth and pressure gradients. The modal instability wave growths (both on- and off-axes crossflow and Tollmien-Schlichting) are balanced to produce a pressure distribution that will have a theoretical maximum NLF region for a given streamwise wing station. An example application is presented showing the methodology on a generic supersonic transport wingbody configuration. The configuration has been successfully redesigned to support significant regions of NLF (approximately 40% of the wing upper surface by surface area). Computational analysis predicts NLF with transition Reynolds numbers (ReT) as high as 36 million with 72 degrees of leading-edge sweep (ΛLE), significantly expanding the current boundary of ReT - ΛLE combinations for NLF. This NLF geometry provides a total drag savings of 4.3 counts compared to the baseline wing-body configuration (approximately 5% of total drag). Off-design evaluations at near-cruise and low-speed, high-lift conditions are discussed, as well as attachment line contamination/transition concerns. This computational NLF design effort is a part of an ongoing cooperative agreement between NASA and JAXA researchers.

Lynde, Michelle N.↗
NASA NTRS1986

Ascent trajectory dispersion analysis for WTR heads-up space shuttle trajectory

The results of a Space Transportation System ascent trajectory dispersion analysis are discussed. The purpose is to provide critical trajectory parameter values for assessing the Space Shuttle in a heads-up configuration launched from the Western Test Range (STR). This analysis was conducted using a trajectory profile based on a launch from the WTR in December. The analysis consisted of the following steps: (1) nominal trajectories were simulated under the conditions as specified by baseline reference mission guidelines; (2) dispersion trajectories were simulated using predetermined parametric variations; (3) requirements for a system-related composite trajectory were determined by a root-sum-square (RSS) analysis of the positive deviations between values of the aerodynamic heating indicator (AHI) generated by the dispersion and nominal trajectories; (4) using the RSS assessment as a guideline, the system related composite trajectory was simulated by combinations of dispersion parameters which represented major contributors; (5) an assessment of environmental perturbations via a RSS analysis was made by the combination of plus or minus 2 sigma atmospheric density variation and 95% directional design wind dispersions; (6) maximum aerodynamic heating trajectories were simulated by variation of dispersion parameters which would emulate the summation of the system-related RSS and environmental RSS values of AHI. The maximum aerodynamic heating trajectories were simulated consistent with the directional winds used in the environmental analysis.

Source record↗
NASA NTRS1992

Reducing transport delay through improvements in real-time program flow

This paper describes the process of measuring and reducing software-transport delays through careful analysis, and modifications of real-time programs. A 737 program is analyzed and modified to improve the simulation overall transport delay by approximately 30 percent. The transport delay was improved through modification to the real-time program flow and the implementation of quaternions in the calculation of the math model.

Smith, R. M.↗
DOE OSTI2021

Analysis Program Annual Progress Report (FY2020)

During fiscal year 2020 (FY 2020), the U.S. Department of Energy Vehicle Technologies Office (VTO) funded analysis projects supportive of VTO’s goals to pursue early stage research in vehicle and mobility system technologies to reduce petroleum dependence, increase energy reliability and security, improve transportation affordability, and promote economic growth. VTO analysis projects result in a foundation of data, analytical models, and applied analyses that provide insights into critical transportation energy problems and assist in research investment prioritization and portfolio planning. This document presents a brief overview of VTO analysis efforts and progress for projects funded in FY 2020. Each of the progress reports includes project objectives, approach, and highlights of the technical results that were accomplished during the fiscal year.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
NASA NTRS2018

Multifidelity Uncertainty Quantification of a Commercial Supersonic Transport

The objective of this work was to develop a multifidelity uncertainty quantification approach for efficient analysis of a commercial supersonic transport concept. An approach based on point-collocation, non-intrusive polynomial chaos was formulated in which a low-fidelity model could be corrected using multiple higher-fidelity models. The formulation and methodology also allows for the addition of uncertainty sources not present in the lower fidelity models. To demonstrate the applicability and potential computational savings of the multifidelity polynomial chaos approach, two model problems were explored. The first was a supersonic airfoil with three levels of modeling fidelity, each capturing a gradual increase in modeling of the underlying flow physics. As much as 50% computational cost reduction was observed using the mutlifidelity approach, while predicting nearly the same amount of uncertainty in drag. The second problem was a commercial supersonic transport. This model had three levels of fidelity that included two different modeling approaches and the addition of physics between the fidelity levels. Results of this analysis yielded nearly a 70% computational savings to predict a comparable amount of uncertainty in ground noise. Both problems illustrate the applicability and significant computational savings of the multifidelity method for efficient and accurate uncertainty quantification.

Thomas K. West IV↗
DOE OSTI2025

Sensitivity analysis of a parameterization of coagulation in an aqueous transport model

A three-dimensional aqueous transport model, ALGE, was developed at the Savannah River National Laboratory (SRNL) as a tool for emergency response. Recently, coagulation and break-up of sediment and particulate (contaminant adhered to sediment) matter has been added as a new model capability, representing both processes as functions of salinity and turbulence. A sensitivity analysis was performed by comparing time series of sediment and particulate concentrations at various locations when the model’s parameters (particle size and density) are altered. The results show significant differences between experiments in both freshwater and saltwater systems parameters vary (P-values < 0.05). From this sensitivity study, we have concluded the importance of incorporating both salinity and turbulent effects, as they have a large role in the physical process of coagulation and breakup of sediment. By accounting for these physical processes, we have made the ALGE model a more robust tool for emergency response.

Aqueous fate and transport↗
DOE OSTI2026

Pathways of bio-jet adoption in the US aviation industry with implications for the overall transportation and energy sectors: an integrated, multi-sectoral analysis of future scenarios

Bio-jet adoption has emerged as an attractive option to complement and supplement the use of refined fossil liquid fuels in the aviation industry in the US. However, there are significant uncertainties surrounding the costs of bio-jet including but not limited to costs of feedstock, transformation costs and the competition with co-products of bio-jet that may be demanded elsewhere in the transportation or energy sectors. This study models alternative trajectories of bio-jet adoption in the US aviation industry by 2050 through the use of a global integrated multi sector dynamics model. Three bio-jet production and consumption pathways are presented- soybean oil to jet, corn ethanol to jet (ETJ) and Fisher–Tropsch-based bio-jet, with each pathway explicitly considering the co-production of renewable diesel and renewable gasoline alongside the bio-jet. Without explicit actions or technology changes to offset the technology cost of bio-jet, scenarios where bio-jet displaces refined liquids result in higher aviation fuel prices (ranging from a 25% increase to 120% increase by mid-century) and lower demand (ranging from −14% to −43%). Corn ethanol will play an important role in the US if large scale amounts of bio-jet are to be produced with smaller effects on demand and prices. While scenarios with high levels of bio-jet availability without the availability of ETJ in the US can significantly reduce emissions in the aviation sector, these reductions are achieved more through the reduction in overall aviation fuel demand rather than technology adoption.

09 BIOMASS FUELS↗
NASA NTRS1981

Earthward transport of energetic protons in the earth's plasma sheet

An analysis is made to assess the transport of energetic protons (0.29-0.50 MeV) at downstream distances of 30-45 earth radii in the earth's plasma sheet surveyed by the IMP 7 and IMP 8 spacecraft. It is found that there is a net earthward transport of these particles, although tailward streaming is observed as frequently as earthward streaming. The averaged flux is 200 per sq cm s in this energy range and the total flux over the plasma sheet region is 4 x 10 to the 22nd per s. It is suggested that this net earthward flux of energetic protons may contribute to the population of the outer radiation belt.

Lui, A. T. Y.↗
DOE OSTI2022

Measurement of Transport Properties of Woody Biomass Feedstock Particles Before and After Pyrolysis by Numerical Analysis of X-Ray Tomographic Reconstructions

Lignocellulosic biomass has a complex, species-specific microstructure that governs heat and mass transport during conversion processes. A quantitative understanding of the evolution of pore size and structure is critical to optimize conversion processes for biofuel and bio-based chemical production. Further, improving our understanding of the microstructure of biochar coproduct will accelerate development of its myriad applications. This work quantitatively compares the microstructural features and the anisotropic permeabilities of two woody feedstocks, red oak and Douglas fir, using X-ray computed tomography (XCT) before and after the feedstocks are subjected to pyrolysis. Quantitative analysis of the three-dimensional (3D) reconstructions allows for direct calculations of void fractions, pore size distributions and tortuosity factors. Next, 3D images are imported into an immersed boundary based finite volume solver to simulate gas flow through the porous structure and to directly calculate the principal permeabilities along longitudinal, radial, and tangential directions. The permeabilities of native biomass are seen to differ by three to four orders of magnitude in the different principal directions, but we find that this anisotropy is substantially reduced in the biochar formed during pyrolysis. The quantitative transport properties reported here enhance the ability of pyrolysis simulations to account for feedstock-specific effects and thereby provide a useful touchstone for the biorefining community.

09 BIOMASS FUELS↗